Installation of hp psc 1310 on windows 7

Similar Questions

• HP PSC 1310

  I have been using my PSC1310 with a laptop running windows XP. Now, I changed to a laptop that runs windows Vista, can I continue to use this printer, or should I throw it away and buy another printer?

  mjlondon wrote:
  

  Thanks again, Enrico, but I wonder if we are at cross-purposes, because I did not clear I'm not now able to use my Mac Yosemite. My Windows PC (Vista 32 bit) is left behind in another country and will not be accessible for me until April. You say I can download Windows Vista 32-bit driver on my Mac and I will be able to install and use the software on my Mac?

  Best wishes

  Malcolm

  N ° you have not made this clear at all. I based my suggestions on the subject and the information contained in the initial post that you created.

  You cannot use Vista with an Apple OSX driver.

  Follow the instructions on the HP web document I have planned on installing the driver for the printer on an Apple device. HP printers supported in OSX 10.10 Yosemite. Your PSC 1310 printer is supported, but may not have a full pilot. Apple V. 3.0 for OS x printer drivers

• HP psc 1310 all in the printer software does not scan documents or computer keyboard control images.

  HP psc 1310 all in the software of the printer will not scan documents or photos of computer keyboard, control and transfer the file to the hard drive.

  Hi jghall35,

  1. When did you start to question?

  2 have you scan before without any problem?

  3. are you able to scan manually?

  4. What do you mean by the transfer of control of computer keyboard saying the file on the hard drive?

  5. what you trying to accomplish?

  Links:

  Scanning: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/scanning-frequently-asked-questions

  HP support link:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&TaskID=110&prodTypeId=18972&prodSeriesId=360489

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to install HP PSC 2350 on Windows 8

  I have the HP PSC 2350 printer that I bought years ago. It is installed on Windows XP with the USB cable and installation CD. Soon I will buy a new computer with Windows 8. I ask step by step instructions how the printer on windows 8.

  Hello Thomas! I hope you are well.

  I saw your post about wanting to use your PSC 2350 with Windows 8. There is actually no driver and software available for this old model of the printer and the new system of Windows 8. See the link below for information on installing a Windows 8 driver with a Windows Update.

  Install a Windows 8 with Windows Update driver

  I hope this helps you!

  Have a great Monday

• HP PSC 1310 all in one more not print color

  Hey guys,.

  Recently, I replaced my color ink cartridge in my HP PSC 1310 after don't have one a few days and now my printer just won't print in color. It is aligned and it SHOULD be printing in color, it displays just everything in black and white. Y at - it a setting I'm missing or something?

  Thank you guys.

  SlamNetwork,

  OK, we know that's not the material of the PSC 1310, that we are able to get the color on the diagnostic print page. So that leads me to believe he has associated software, something in the settings of printing or drivers are causing to print in black and white only. Before you complete the steps, make sure that your Windows computer has all updates installed, check and see if there are those that could be installed. Please follow the steps listed below:

  1. disconnect the USB.

  2. remove the software HP PSC 1310 to uninstall from the control panel of your computers an option of the program.

  3. restart the computer

  4. make sure that all them that software PSC has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu

  5. now, go ahead and download the software and drivers for your PSC (DO NOT connect USB until the software prompts you to):

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&cc=us&DLC=en&LC=en&OS=4063&product=374578&sw_lang=

  6. go ahead and print a test page.

  7. If you are unable to print a test page or get no color, please run the HP Print and Scan Doctor- it was designed by HP to provide the users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan the products related to Windows computers.

  Please let me know if you see now on your color prints, take note of any errors that you may encounter. I'll watch for your reply.

• do not install the software for PSC 2355 using windows 7

  Recently upgraded my system from windows XP to windows 7. The CD with the software indicates compatibility with Windows 98, Me, 2000 & XP. I tried to use it to install the software but received a message saying that it was not compatible.  Need help, is there a way to bypass the message version and install or adownload available for me to use the HP University?

  Hello Milliebee,

  Welcome to the Forums of HP Support! I see that you have recently upgraded your computer from Windows XP to Windows 7 and you want compatible software and download drivers for your HP PSC 2355 with the HP Director program.

  Now, because you're using a newer operating system with an old printer you install software and drivers by using the OS print driver, which means that there is no download available, but the driver was built into the operating system.

  To better understand, please have a look here: installation of the printer software in Windows 7 for a USB cable connection, regarding the HP Director, it is no longer available. You may be able to get some third party options that can be comparable.

  I hope this helps!

  Thank you

• How to scan to PDF of my PSC 1215 using windows 7?

  Al-in-one-HP PSC 1215

  just installed on the new laptip running Windows 7

  Former HP Director disappeared and the built-in Windows software will only scan a document in JPG, PNG, BMP formats and a sheet at a time. How to scan in PDF format as before, and how can I be sure that several pages document sweeps as a document not as unique files?

  Hello JPRRyan

  Scan to PDF is not available when you use the built in Windows drivers. Since there is no software of full functionality for the PSC 1215 in Windows 7, you will need to find software of third parties to scan in PDF format.

  I heard good things about VueScan, but I also suggest you do a web search of your favorite for scan software PDF search engine.

• HP psc 1310 series all-in-one

  HP psc 1310 series all-in-one supports wireless printing? I use Vista 32

  Hello

  Based on his specifications: No.

  Interface IO

• Installation of the Sims 2 on Windows 7 stuck at 52%

  Original title: installation of the sims 2 on windows 7.

  Hiya me and my friend are both trying to install the sims 2 on 2 different laptops (both with Windows 7), but were both stuck, mines at 52% and he says that the current files is TSData/Res/Sound/Build.package and my friend to 49%. We are all both are on the second attempt.

  Can you help us because we wouldn't be able to play new games

  Hello

  You can copy the content of the game on your hard drive & then try to install the game.

  Step 1
  
  If you have the Sims 2 game CD, you can create a new folder on your drive hard by following this link.
  Create a new folder

  Step 2
  a. open the content of the game CD, copy & paste the content to the new folder.
       Copy and paste a file
  b. When finished, run the configuration file in the copied folder.

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need detailed installation instructions to put a bought Windows XP Pro on a laptop HP 8710p Business.

  HP windows xp pro 8710p

  I need detailed installation instructions to put a bought Windows XP Pro on a laptop HP 8710p Business.

  Hello

  How to do a clean install of XP Pro:

  "How to perform a new Installation of Windows XP - Part 1 of 4"

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  And you go on the site of HP to download XP drivers and software, etc. for your laptop model (choose the operating system from the list)

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3355687&TaskID=135&prodTypeId=321957&prodSeriesId=3369264&lang=en&cc=us

  And here is a link to the manuals for this model:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportManual&lang=en&cc=us&docIndexId=64179&TaskID=101&prodTypeId=321957&prodSeriesId=3369264

  See you soon.

• Error7 message about the signature unidentified, the upgrade and installation of iTunes 10.5 for Windows Vista.

  Original title: error upgrading and installation of iTunes 10.5 for Windows 6.

  I tried all kinds of ways to solve this problem, but I can't seem to find a solution. This all started when I tried to update my iTunes to version 10.5. Then came the error message 7 on unidentified signature etc. I could not even run my iTunes more then. I started download iTunes again to repair and it just doesn't work. I don't have problems with the installation of my iTunes for the first time a year ago and upgraded whenever I allow it.

  All other methods I tried to correct the error includes:
  • Uninstall iTunes completely and everything that it supports the programs and files (Quicktime, supporter of Mobile, Hello, Safari etc.)
  • Download Quicktime separately after you have uninstalled it as suggested by other users in some forum.
  • Update the frame Microsot.NET as suggested by the Apple Support site.

  • Manually started the installation of such Windows program suggested by one of the answers on this site:

    a. click the Start button, and then type services.msc in the start search box and press ENTER.
    b. Locate the Windows Installer service.
    c. check that the status is started. If the condition column is empty,
    d. right-click on Windows Installer, and then select start.
    e. If you get error trying to force start the Windows Installer service, then try to change the Startup Type to automatic.
    f. restart the computer.

    I have tried for at least 10 times and I have not yet set and am frustrated. Would be really grateful a solution to this soon.

    Windows Version: Windows Vista Home Premium - Version 6.0 (build 6002: Servie Pack 2).

    Thank you.

  Hi Junetyl,

  What is the complete error message you get?

  Method 1:

  You can see the article next to the Apple support and check if it helps.

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  You can also consult the following article:

  iTunes for Windows: "Error 7" message when you open iTunes

  You can also try the following steps and check.

  Method 2:

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 3:

  You can also perform a clean boot and check if you can install iTunes.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  You can also get in touch with Apple using Arthur support.

  Apple iTunes Support

  Hope this information is useful.

• HP psc 1600 series - Windows 7 64 bit. do not print multiple copies

  HP psc 1600 series - Windows 7 64 bit.  If I want to make copies of print15 for a 1Copier single document will print so I have to go to print 15 times.  When I change the number of copies I want to print the change number of balck to blue.

  reneenan

  I understand the logic of a trial version as you explained. I will deal with this problem when the problem will get more serious, but for now I can deal with that.

  I want to thank you very much for all the time that you upgrade to solve my problems.

  Thank you very much, I really appreciate it.

  Renee-nan

• I don't get an installation ID while making reappattage of windows 7? How to solve this problem?

  I don't get an installation ID while making reappattage of windows 7? How to solve this problem?

  You must complete installation before you can even do it.

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

• Devic is a range of printers hp psc 1310 who now is printing very slow is there a way to fix this

  THIS PRINTER WAS WORKING FINE BUT HAS COLLAPSED NOW PRINT NORMALLY AND LASTS 30 MINUTES TO PRINT A PAGE

  NEED MARKETING TO SOLVE THIS PROBLEM

  The following assistance HP PSC 1310 series examines solutions for slow printing: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01940312&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=374578

• hure Pro XI could not complete the installation process, even if the progress window said it was downloaded 100%. In the installation process it uninstalled my previous version of Acrobat, now I can't open the PDF files.

  Acrobat Pro XI could not complete the installation process, even if the progress window said it was downloaded 100%. In the installation process it uninstalled my previous version of Acrobat, now I can't open the PDF files.

  Hi RKrensel,

  Please let me know the version of the operating system installed on your computer?

  If you are on windows system, run this tool cleaner Download Adobe Reader and Acrobat tool - Adobe Labs & restart your system.

  Make sure that there are no Adobe process running in the background using the Task Manager.

  Then try to download & install Acrobat XI using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X & serialize using your Adobe ID

  Let me remind you that your subscription for one year has already expired on 4 September

  Kind regards

  Nicos