Installation of the USB-6211 for DA

Similar Questions

• Server does not start after the installation of the USB bootable, ESXi

  Hello

  I installed VMware ESXi 5 on a SSD drive using a bootable USB key, but my server does not automatically start since the SSD after installation. I can boot ESXi in the offered by the BIOS boot menu.

  The startup configuration is perhaps incorrect because during the installation of the USB drive is present, but after the installation, it is not?

  Also has anyone seen this problem?

  Kind regards

  Gijsbert

  Updating the BIOS on the DQ77MK at 49, and you should be able to start - UEFI must never be activated.

• Installation of the minimum runtime for the program using the driver USB of NI-VISA personal

  I have a LabVIEW 2009 application that uses a driver for a USB device, created using the wizard of the Driver NI-VISA.  What my minimum installation of runtime needed to understand when I move it on a non-development machine?

  On my dev machine, I went to MAX and given my new camera USB one alias of VISA.  I think I'll meet trouble if my deployment includes no MAX on TIME machine.

  Right now, I guess the minimum is LabVIEW 2009 DURATION, NOR-DAQmx Configuration (including MAX) execution, duration of NI-VISA.

  If not, is there a method that avoids having to configure an alias altogether?  It would be nice to not not need NOR-DAQmx, I use not any material that my USB device with driver custom.

  Thank you!

  Not sure why you consider same installation DAQmx. You can install just MAX, the VISA duration and your harware MAX configuration. The installerallows of LabVIEW allows you to export the configuration, and then you select the option to import on the deployment computer. You will also need to include the installation of the inf file you created with the wizard.

• Best installation of the USB driver of practices for non-persistent clones

  Hello

  are there best practices using non-persistent clones and USB driver?

  Client A connects to a linked clone and connects a drive USB flash or something else.

  The installation of the driver is horrible slow on Windows 7:

  • New device found...
  • looking for a driver in driverstore...
  • installing the driver software...

  Tested now and it took more than 8mins.

  After installation, the appliance is ready and can be used. But after disconnecting from the desktop computer updates and each driver installation must be run again at the next connection. We have disabled the Windows updates and specified do not search Windows Update for device driver locations. (Policies-> models-> system administration / Installation of devices-> search order specified for the device driver source locations).

  Clues, why it is so slowly installing drivers and how to prevent the reinstallation of drivers every day

  Thank you and best regards

  Well,.

  We have set. VA was the problem...

  We excluded analyzes the demand for processes drvinst.exe.

  Thank you

• Bootcamp errors during the installation of the USB on iMac mid-2011

  I tried to install Windows 8.1 on my iMac for mid-2011. The problem is that my optical drive is not working properly.

  I created a USB bootable via Bootcamp Assistant on my MBPr and have tried my iMac HARD drive partitioning, using OSX disk utility and disk in recovery mode utility. I tried to leave the space as free and formatted as ExFat and fat.

  At the start of the usb drive and try to install on the bootcamp partition, I get the error that it is a MBR and not on a GPT partition.

  In addition, do not know if it's important, but it is a secondary internal drive. My main drive of OSX is an SSD. I have no problem accessing the drive in question under OSX.

  Help please!

  Mac 2011 (and more) have challenges with no DVD installs due to optical drive problems. Changes to the file info.plist Bootcamp to allow creating install USB works only partially because of start-up problems. Only two solutions that work with a high degree of success are

  1. replace the optical drive, or,

  2 http://forums.macrumors.com/threads/install-a-windows-7-partition-on-mac-osx-wit hout-optical-car-or - usb.1836959 / #post... .

  Following two discussions have some installs successfully, but they usually lead to broken drivers or not functional Apple hardware.

  Re: Bootcamp without optical drive

  Re: Activate Bootcamp install USB for OSX 10.9 * ŒUVRES *.

• Installation of the device drivers for the Zune 8 GB using Windows Vista SP2 OS

  I try to install the Zune software installed on a laptop Acer of MS Vista with SP2.  The Zune player is a 8 GB model.  The Zune software is installed fine, but when Vista tries to install device drivers, it fails, asking me to contact the hardware vendor.  It is used to work on another computer running MS Windows XP with SP3.

  What can I do to make it work on Vista computer?

  Hi Midnightwreck,

  What is you receive the exact error message?

  Step 1: Examine the Windows Device Manager. To do this, follow these steps:

  (a) click Start, right-click computer, and then click Properties.

  (b) click on Device Manager. Click on the computer root icon and then click on Search the hardware changes in the Actions menu. Zune should be listed under portable devices.

  Note If the player has been incorrectly installed, Zune can be listed with a yellow exclamation point (!). Or, it may be listed under other devices as USB (Universal Serial Bus) device.

  (c) double-click Zune, and then click driver . The current version of the driver that is installed must be 4.2.58.0.

  If the Windows Device Manager indicates a problem with the device, or if the Player version that is installed is not the current version, you must update the driver. To do this, follow these steps:

  1. right click on Zune or a USB device , and then click Properties

  2. click on the tab driver , and then click Uninstall.

  3. If it is displayed, select delete the driver for this device, and then click OK.

  4. click on the computer root icon and then click on Search the hardware changes in the Actions menu.

  5 right click on Zune , and then click Properties

  6. Click tab driver , and then click set to update driver.

  7. click Browse my computer for driver software.

  8. click on Browse, find the program Files\Zune\Drivers folder, and then click OK.

  9. click Next.

  If you are prompted, click install.

  After the driver installation is complete, click close two times.

  Your Zune device is not detected by your computer or the Zune software
  http://support.Microsoft.com/kb/944909

  Step 2: Download and install the latest version of the Zune software, then check if the problem persists.

  You can follow the steps mentioned in the link below

  How to fix errors in the Windows device for the Zune device manager
  http://support.Microsoft.com/kb/953933

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of the USB 2.0 extension cable failure, and I am on Windows 7.

  I recently bought a foot 6 ' Male/female' USB extension cable, and it's USB 2.0.
  I bought it because my headphones would not properly work because of a problem in my computer and I thought that an extension can help to stop this problem.
  So, I try to install, but it never does.
  Does anyone know why there are installation problems?
  Also, Yes, the helmet works if I plug it directly on the computer, but with some errors.

  Hi guy,

  I understand that the USB 2.0 extension cable does not work on your computer.

  1. What is Gets the error message when you connect the headphones to the computer?
  2 have you tried plugging the USB cable into another computer?
  3. have you tried it with different USB ports?
  4. What is the brand and model of the computer and a USB headset?
  5. did you of recent changes to the computer?

  Extension cable does not need a driver, this is just a thread. USB cables come in varying degrees of quality. The length of the cable can also be important, because the voltage of the equipment can be reduced by the resistance of the cable. Some devices specify 6 feet or less while others may work correctly with 12 people or more.

  I would suggest trying the following steps and check if it helps.

  Method 1:

  I suggest to run the hardware and devices Troubleshooter and check if it helps.

  Open the hardware and devices Troubleshooter

  
  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I suggest to open a session on the helmet manufacturer's Web site and install the latest drivers for the headset, if the problem persists.

  You can also check the USB device drivers updated using windows update. See below the help link

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the edge of the question persists I'll ask allows you to check the chipset driver updates you find on the manufacturer's website. The chipset drivers normally integrate USB controller drivers as well.

  For more information:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  It will be useful.

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Installation of the USB - no scanner detected by the software

  I bought Microtec USB scanner ScanMaker6100 but cannot begin to work with it:)

  Recognize the scanner as a Plug & Play device my PC and install it but the software can't find it.

  I tried to scan on another PC to check and it works so I have problem with my TOSHIBA A60?

  I had send my PC profile to support of Microtec and they suggest the following:
  "your installation of USB needs chipset driver. Currently, he works in "universal". Unmanned correct install cannot USB chipsets support entirely. Normally you have the computer driver MB CD when you buy the computer. »

  My USB controllers in Device Manager are installed like:
  Standard enhanced PCI to USB Host Controller
  Standard openHCD USB host controller
  In devices, I see they are ATI SB200 - USB Controller and ATI SB200 - USB 2.0 Controller.

  I really should reinstall / update my USB driver? How? Where can I get these drivers?

  [Edited by: admin July 16 05 12:34]

  Hello

  I don't think you need to install or update the USB drivers. If the scanner is properly installed and recognized there must be another problem. In my opinion, you should try to use the scanner with another program. As far as I know, you can also use Microsoft word and try to import image from a scanner. If Office is installed on your device, try to import something in the word document.

  Good bye

• The USB receiver for my wireless one mouse overheating and now unusable

  Original title: what's happening with my mouse?

  My wireless Microsoft 5000 mouse: the usb piece has overheated to the point, you can actually burn your fingers on it and now it won't work.  It's the second mouse what has happened.  I had the same exact type of mouse before and it did the same thing, I thought it was a fluke and I love that mouse, so I bought another.  Of course, now it overheats too.  It is not my computer because I use other usb mice, and they do not overheat.  Is this simply faulty mouse, because I read of others having the same problem.  I spent $80 for 2 of them last year, can it be replaced?

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  I suggest you follow the link and check.

  I also suggest you to contact the manufacture of your computer and your mouse to check.

  http://www.Microsoft.com/hardware/en-us/support

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• no internet tv after installation of the usb tv tuner!

  I recently bought a HP laptop g62-228 ca series.

  I had set up the center of windows media, (no problem in doing so).

  I was able to open/Internet t.v and view them (especially short video clips / some full episodes, very crisp clear picture.) a lot of the content could not be considered because I reside in the Canada.

  After installing the usb tv tuner and set up for regular tv viewing with my local cable provider. (no problem with that too).

  I could not open/access channels or videos even as I liked be4 I had installed the tv tuner. I can see them in the Guide and even highlight, but I can't open them.

  If someone can help me solve this problem, so I can return to view internet tv. on my laptop?

  I would be very grateful.

  P. S.

  the tuner, I bought says it supports NTSC; ATSC; & clear QAM.

  poonman61

  Hello

  Unfortunately, Internet TV is not available in the Canada.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Don't switch off the USB cable for HP 5520

  During the installation of my new HP5520 I have connected the USB cable between the printer and my desktop PC, and then I forgot to unplug again before installing the software from the disc.  Does it matter?

  Hello

  It might affect the installation of the printer, but if you don't see any effect, you should not have problems.

• Windows Vista will not install the usb driver for kobo reader

  I am trying to configure my reader Kobo following the indications, the PC does not allow me to install a USB driver for download, I tried many times

  but it keeps blocking.

  When you connect the device Kobo try to choose 'Manage the library', so the camera gets identified:

  http://kobo.intelliresponse.com/index.jsp?requestType=NormalRequest&id=1438&source=5&question=Do%20I%20Keep%20Reading%20or%20Manage%20Library?

• HPPIW. EXE does not solve the problem with the installation of the complete software for 8500 A909g

  Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g.  By your answer on 5/19, I downloaded HPPIW. EXE and it ran.  It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard."  Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?

  Hello
  If please try following the steps below and check if this can solve the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Windows does not recognize the USB key for backup

  Windows does not recognize my USB drive for backup. Windows seems to give this option, but requires that I have to use a disc in drive D. How can I change this?

  Original title: Windows 7 backup

  With USB installed & in the office, go in run, type: diskmgmt.msc

  MSC, locate & L.click on hardware, go to actions, all, select: activate

  closing of msc

• I5-d001sx: could not find the usb drivers for win 7 32 bits for the model 15-d001sx

  Hello
  I have hp laptop 15-d001sx. My USB doesn't work not with win 7 someone can you please tell me from where I can download the usb drivers.

  Hello:

  Download, unzip and run the file setup.exe from the link below...

  https://Downloadcenter.Intel.com/download/24503/USB-3-0-Intel-USB-3-0-driver-for-Intel-NUC