Installation of Win 8 Officejet 4500 problem

Similar Questions

• can I get an installation for my hp officejet 4500 cd

  can I get an installation for my hp officejet 4500 cd

  You can get an installation CD or simply download the drivers for your printer. I included a link at a time.

  The installation CD

  Drivers for your printer.

  Let me know how it goes.

• loading full version of the software of HP officejet 4500 problems

  Hello

  I'm trying to load the software full version (OJ4500vG510a-f_Full_13_en) for my officejet 4500 HP. I can load the limited version, but the full version does not load. It is suspended on control systems. I did level 3 clean several times, I've defragmented, interpreter restoration system and cleaning system. It just seems odd that it will load the limited but not complete. My reason for wanting the full version if I can get the solution center software and be able to scan. With the limited version, I can print fine but the scanner does not work. I use Windows Vista.

  Thank you

  Hello
  Follow the steps below and check if it solves the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

  Now, try to reinstall the HP software and check if the installation goes as planned.

  If the problem persists, continue following the steps below:

  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• HP Officejet 4500 problem with installing

  I get a new computer HP with W-8.  I have my old printer an Officejet 4500.  I have download the new drivers but always give me an error message and put me a guide to solve the problem.  I followed the direction of the guide without a success.  The computer recognizes the printer, but he said that he have problems with drivers.

  Thank you for your answer, but I tried something I read in the forum and it solved my problem.

  Happy new year!

• Alignment of Officejet 4500 problem

  I just installed a black cartridge in my Officejet 4500 G510n z and the printer is now stuck on "alignment page. Please wait! ». I have reset the printer once already (disconnected the power for a few seconds) and it does the same thing now... been wait about 10 minutes now.

  How long lasts alignment cartridge supposed to take? I would like the picture, it should take less than a minute... or a few minutes at most... at least I don't remember it takes this time when I installed the printer at the start.

  I installed the cartridge correctly, as far as I could tell and I loaded the plain printer paper in the tray. The cartridge is an original HP 901, nothing spare "after-market".

  I don't know what I could do or what it is.

  I don't know if it is a 'real' solution but I removed and replaced the 2 cartridges, printing and reset the printer to new working afterwords even if he doesn't start the alignment process.

• HP officejet 4500 G510n french: installation of the HP officejet 4500 G510n wireless failed

  The first phase of the installation process I get the attached window:

  Regarding other devices I don't face any problem USB.

  I checked all the USB drivers on the list of devices.

  I wonder why I got this message because I do not wish to install via a USB line but wireless. I checked that the printer has been connected with my DELL lattitude e5570. Feel secure by the driver windows is no problem.

  What do I do to solve this problem.

  

  Hello

  In Windows Explorer, type % temp % and press ENTER.

  Locate and open the installation folder of HP, which begins with 7z (e.g. 7z1234s) or appears as hp.

  Open the installation folder.

  Find the usbready.exe file and rename it usbready1.exe.

  Now browse a level upwards and press Setup.exe to begin the installation, and then follow for the difference.

  Please let me know of any problems,

  Shlomi

• Initial installation of the HP OfficeJet 8600 problem

  I tried to install my new HP OfficeJet 8600.  But it keeps looping of the animation of ink cartridge over and over and over and over and over.  I inserted and reinsert the cartridges several times.  I even removed and then reinserted the ink transporting mechanism, but no luck.  I got no error message, just looping nonstop video animation of introduction on how to insert the ink cartridges.

  Is it possible to go beyond that, so I can finalize the configuration to the top?  Or do I me pack up and return it to the store?

  Unfortunately that has never worked. I chatted with HP and concluded that it was a hardware malfunction, so I sent back a new and have not had a problem since

• Installation of Mac with Officejet 6700 problems

  I try to install the disk that came with my Officejet 6700 and he tells me that it can't open because it works on the OS 10.7 or below, and I OS 10.8.2.  Y at - it somewhere that I can download a new version of the material so that it will be compatible with my printer?

  Hello

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107209-1&cc=us&DLC=en&LC=en&OS=219&product=5058338&sw_lang=

  Don't forget to select HP Software recommended when installing to get full functionality.

  Finally, after completing the installation, restart your Mac and run the software update to ensure that your drivers are up-to-date.

  Shlomi

• HP Officejet 4500: Scanning with HP Officejet 4500 problems

  I'm trying to scan a doc with my 4500.  Everything seems to be fine: I marked it 'Save to Doc,' I see a preview on my computer, but when I type complete no file is created in my analysis.  Could it be because that the ' Scan To: ' field in 'Scanner Options' is empty?  Any suggestion is welcome.

  Solved by following the instructions in the following mission: "HP Solution Center does not record the scanned files.

• Scanning OfficeJet 4500 problems

  
  

  Hi rdhnick,

  Follow the steps below.

  1 remove the shortcuts on the right side

  2. click on the device to update, and then close the scan window

  3. open again the scan window

  4. add shortcuts on the left side to the right side

  5. click on the device to update

  6. try to scan from the front panel of the printer

  

• HP Officejet 4500 installs wireless on the laptop Windows 7 computers 2, but not on the 3rd

  Help a friend to a printer with the HP all-in-one Officejet 4500 problem.  Although it has been installed on the laptop of the wife of my friend, he would never print.  When pointing the mouse on the icon of the printer the printer and the devices page, this would indicate that the printer is offline.   It was not the case.

  I used the disk supplied with the printer to install wireless on their other two laptops of W7 and installed with a wired connection on their tour of W7.  The printer properly on all PC functions.

  I used the uninstall level 4 OJJ5700 washer 8 HP utility to remove any trace of the product of his laptop and then again used the disk to install the printer.   As with the other 2 laptops, I selected a wireless connection, but unlike the other 2 it finally gives me a msg that the printer is not found on the network.  Then it prompts me to temporarily connect the laptop to the printer with the USB cable, saying that once it finishes the installation of the software, that we can then make it wireless.  It never ends install even with the cord.  I went through this process twice, and both times it sitting there on the stage of configuration for an hour more before I killed the task.

  The printer is sorta installed on the laptop, because it allows to print with the cable, although the name of the printer has a. TMP extension in the devices & Printers.

  All laptops are connected to the same network.

  Anyone who has never met this before and come up to the top with a solution?  The laptop seems to work otherwise beautifully, although I suppose it wouldn't hurt to run a full scan of Malwarebytes.  I never really knew the problem, it's viral, but I just ran out of time today before that I could make sure...

  Hi boweasel,

  Please confirm the steps for me. At this point, you did all the steps of troubleshooting of the printer, which should solve the problem. At this point the printer works with two other computers, it seems it's something with the operating system on this computer. I suggest contacting the manufacturer of the laptop on a recovery or disturbances to the OS.

  Please let me know if you are able to install and impression after working on the operating system.

  Thank you

• HP Officejet 4500 wireless connect installation problem

  I've just set up my wireless Officejet 4500 (model G510). My network is detected by the installation CD and manual configuration wizard wireless, but not by automatic wireless Assistant. After you connect, the two have shown the result "the printer cannot find the router, please check if the network name and password are correct". However, I am sure the detected network and password were correct. Could you help me on this issue? Thank you!

  Let us make sure that the printer is not broken.  Can make a copy of the front of the printer?

  Uninstall you the HP software by using the HP uninstaller, restart and then download and install the latest software for your printer from the "Support & drivers" link at the top of this page.

• Impossible to scan on OfficeJet 4500 G510n-z under 'Windows 7 starter' - installation problem?

  Recently bought OfficeJet 4500 G510n-z and installed the SW CD on laptop Toshiba running Windows 7 Starter - NOTE when installing the SW printer I have had only a single option enabled: "install the minimal SW.

  How and what SW that I need to install to enable support of the san on this laptop?

  FYI:-I also installed this same SW HP on the Windows XP laptop and I am able to scan documents to this computer (in this case, I believe that I chose to install it "Full SW" option that has been disabled during the installation of Windows 7 Starter.)

  Could you provide links and instructions for essences SW install to support scan on Widows 7 Starter function?

  Using the Starter edition, you can scan sing Windows Fax and Scan:

  Use one of the following methods to scan a document.

• Problems installing HP Officejet 4500 Wireless

  I can't install the driver for my printer on a Toshiba laptop

  Hi Ram,

  1. what happens when you try to install the drivers? You receive messages or error codes?

  2 Windows operating system you are using?

  You can see the following HP support article and try to install the latest version of the drivers for the printer and check.

  Software & Driver Downloads - HP Officejet 4500 Wireless All-- One Printer - G510n in

  Also see the following article:

  Wireless Printer Installation troubleshooting

  You can also read the following article and try to run the troubleshooter and check.

  Printer in Windows problems

  If you use Windows 7, then you can consult the following articles:

  Install a printer

  Find and install printer drivers in Windows 7

• Scanning problems on wireless HP Officejet 4500 G510n-z

  I'm about to throw this printer/scanner at the door!  I love this scanner but since I had to buy a new computer

  with windows 8, no driver disc to install my software disc, I can't seem to get a complete reinstallation of HP programs to install the Center and I don't dare hit the 'add a device' since I reinstalled the full installation software, my computer wants to continue to try to reinstall the application when well even it is already installed.   I uninstalled, cleaned and reinstalled and no still no solution Center.  HP also claims that there are no drivers for the center of solutions for windows 8.  Is this true?   My scanner is 1 year old.  Everything suggests to use the windows fax and scan.  Tried, how ever it stinks and it works not just for what I need it to do.  It is the second time I bought a HP scanner and a year later have problems with the application.  I think I've read all the blogs you have posted and tried all the links so far.  I know not what is missing... It is the center of solution and I can't seem to find a way to recover.  I have an ASUS with windows 8. Help, please!   If I have to buy another printer... I will never buy another HP product again.  Ink cartridges cost almost 60.00 it's half the price of the printer. Please help... Thank you very much for your time

  Hi wincrazy,

  "There is no drivers for the center of solutions for windows 8."  Is this true? "No, that's not true and I can help you get the Solution Center.

  Please follow the instructions below to completely remove the current 4500 software and then re-install complete software functionality, including the Solution Center.

  1. Hold down the Windows Logo key ( ) on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose to save money, save it on the desktop > HP Officejet 4500 G510n Full Feature Software and Driver
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the Util folder
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have a not HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.