installation on another laptop

Hello! IM really hoping someone can help me.
I'm selling my laptop more old and get everything out of him switched to my new.

I downloaded the cloud on my new laptop. When I open photoshop, it says it's just a trial? Where can I get my license info to check, I bought photoshop and for this not to be a trial?

you just need to connect to adobe cc using your desktop app.

Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

Tags: Adobe

Similar Questions

  • I am trying to reinstall vista on another laptop and when I get to the last step (end Installation...) it stops, about 70% of the way through. Now what? I tried to repeat the process about 6 times now!

    I am trying to reinstall vista on another laptop and when I get to the last step (end Installation...) it stops, about 70% of the way through.  Now what? I tried to repeat the process about 6 times now!

    Sorry for the confusion.  I must be useless to English.

    Forget the two laptops.
    I have a problem with a laptop that I tell you all (the Inspiron 1720).
    The disc that I use is labeled as a Windows Vista reinstall disk and provided with the computer when I bought it.  I'm not trying to use it on another computer.

    Reference Dell it is a problem with a process of recovery of Windows and, therefore, a problem of Microsoft.

    See you soon

    Problems with the Dell restore process, contact Dell.
    Dell wrote their recovery process and provided you with this DVD, NOT Microsoft...

    It is their software.

    Ask them for a different recovery DVDs.

    You say that the hard drive has failed.

    He could have more than just tough that failed.
    You can have other hardware issues.

    Hardware issues are beyond the scope of these Forums.

    Good luck with Dell.

    See you soon. Mick Murphy - Microsoft partner

  • BlackBerry Z30 cannot install BBLink under Win 8.1 while I managed to install under win7 on another laptop!

    I am not able to install the BB link to my laptop using Win 8.1 x 64, while I managed on another laptop using win 7 32 x?

    The BB link available sw is compatible with Win 8.1 x 64? I don't know if the Visual c++ required for computer portable x 64 victory 8.1 has been installed correctly. The version of Visual c++ installation required for the win 7 32 x portable computer, I have observed. How to find out?

    Imagine: I had a good day! I contacted technical support from my touch of lenovo laptop 3000. They guided me how to re - install windows 8.1. The mode preferred: without using the recovery disk, without recovery of user data. After you have reinstalled all the additional software like anti-virus, office 2013, webcam etc all went well. I downloaded and installed BBLink and visual C++ + and got immediate access to my Bb Z30 smartphone data. Colleagues, ladies and gentlemen BB users: thank you for your quick and good tips! Over-and-out.

  • I installed an oem of windows 7 in two from one office to another laptop but today I update my desktop pc and I can't activated

    I installed an oem of windows 7 in two from one office to another laptop but today I update my desktop pc and I can't activated

    INSTALLATION AND USE RIGHTS.

    a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

    b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

    c. number of users. Except as provided in these license terms, only one user may use the software at a time.

    d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

    You will need to purchase an additional license.

  • Thunderbird mail on another laptop doesn't have a copy

    I saved my emails on an external hard drive and am overseas now try to load on another laptop but am unsuccessful. When I followed the steps, it goes through the process of 'copy', and I can see my email in folders listed in the Thunderbird folder. BUT, when I open Thunderbird itself, I don't see them in the mailbox and can not access.

    I uninstalled and reinstalled Thunderbird, but I'm still without success. Could this be a problem that I was using Windows 8 and now use an older laptop with Windows XP loaded?

    Any advice will be appreciated.

    Thank you very much

    Good. You can then mark the thread as "Solved" Please?
    Thank you.

  • Using the HARD drive of a Tecra A4 as a for another laptop external HARD drive.

    I have a Toshiba Tecra A4. I want to use the HARD drive as a second hard drive to another laptop, but it seemed to me that the HDD in Tecra A4 has a special bond that does not fit in a standard externel HDD-Bay. Anyone know how I can use the HARD Tecra A4 drive as an external HARD drive?

    Subquestion: is it not possible to use a 2.5 "HARD drive normal in a Toshiba Tecra A4?

    Hello

    AFAIK Tecra A4 has 2.5 inch HDD inside. But the HARD drive has another connector HARD drive that you can remove. The HARD drive is placed in the HARD drive chassis and fixed with four screws. Remove the screw and the connector. Be very carefully and take it easy.

    After that you can use in other laptops.

  • Activation of the license key of Windows 8 on another laptop

    I bought a Lenovo laptop it a few years provided with Windows 8. I plan to buy another laptop, but it comes without a Windows operating system. Can I use my Windows 8 of my old laptop of Lenovo and activate the new license key?

    What I need to uninstall Windows 8 so I can activate on the new? Or because he is embarked on the bios I can't use it on another laptop even if I uninstall it?

    You can not use. You need a retail license key.

  • My computer motherboard laptop disappeared. Connected my hard drive to another laptop but still, no data is found, nor my hard drives are detectable? Very depressing and need the data. Help, please

    My laptop broke down (motherboard, Gone) and is not repairable. The technician took my hard MovieFrame and there is a very important document that I need very badly. I bought a proper case and connected my hard drive to another laptop but unfortunately no data can be found, nor my hard drives are detectable? I am very depressed and need the data. Please helllllllllllllllllllllllllllllllllllllllllllppppppp

    Hi Adel Bushager,

    I suggest you contact the store local tech or the manufacturer of the system to help with recovery of data from the hard drive.

    Hope this information is useful.

  • My laptop does not read the dvd, but another laptop computer bed. PL advise solution. Thank you

    My laptop is Pressario V2000. My laptop does not read the dvd, but another laptop reads the same dvd. PL is the solution. Thank you

    Try another DVD to verify that your laptop can read at least the other DVD.  If he can't play other DVD's then you need to replace the DVD - CD ROM drive supplied with your Pressario.

    Another thing you can try is to check fingerprints or scratches on the DVD, some DVD players are more sensitive than others.

    J W Stuart: http://www.pagestart.com

  • Setup removes the junction point NTFS redirect the folder system "\Windows\Installer" on another disk.

    On a computer running Windows XP Professional SP3, I redirected the "\Windows\Installer" system folder, with a junction to a record point in a tree of directories to a different drive.  The operation was conducted and verified using "junction v1.06 - creator of junction point analysis viewer and Windows' published in 2010 by Mark Russinovich. I moved all the files and subdirectories contained in the original "\Windows\Installer' in the target directory (the these files had been previously copied to a temporary directory and after the move, I checked that they were visible in the folder '\Windows\Installer' open the symbolic link with the Explorer).
    Then I launched a system patch, and I discovered that the installation of the update of the software deleted program point junction that I created, deleted all the cache contained in the directory with the name of substitute target different files and recreated the "\Windows\Installer" folder in the original disc.
    I tested this behaviour a couple of times, installing various software and updates, so I assume that it does not depend on the software that is installed but the installation program itself, which cannot handle a point of junction of the folder "install".
    No warning is given before deleting the junction point and all of its contents.  With a similar procedure, I made two points of junction for '\Windows\Downloaded facilities' and '\Windows\Microsoft.NET' and they have exploited properly.
    Out of understanding points do not work on startup, so it is impossible to redirect for example. :

    • \Windows
    • \Windows\System32
    • \Windows\Config

    "\Windows\Installer" isn't one of those cases, and it is not used at startup.

    Is it possible to use a junction point to redirect the \Windows\Installer on another disk/partition folder, or Setup will always delete all the files that have been targeted in the naming of replacement?

    Hello

    Your question would be better suited for the TechNet forums.

    I suggest you to ask your question to the TechNet forum for better support.

    http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  • Recovery of data from disk hard another laptop computer

    I have a laptop that crashed, then I took out the hard drive and connected via USB to another laptop so that I can retrieve my documents and pictures of her.  The hard drive always seems to be perfectly fine, and I can see most of the information on this program.  However, when I look in the hard drive, I can't find photos or Word documents, and it is said in one of My Documents and Settings user accounts, access is denied.  Most of my info I'm looking was on the desk of my laptop crashed.  Is it possible to find these data?

    You will need 'Ownership' of the file, you get the access denied message in order to access it.

    "How appropriate a file or a folder in Windows XP"
      <>http://support.Microsoft.com/kb/308421 >

    HTH,
    JW

  • Getting an error of ipconfig Media Disconnect on my laptop. Another laptop in the House works well. How can I remedy I have almost tried everything!

    Getting an error of ipconfig Media Disconnect on my laptop. Another laptop in the House works well.  How can I remedy I have almost tried everything!

    Hi Jess,

    Can we have a look if the network adapter is not disabled. Start-> settings-> Control Panel-> network-> Enable connections and departure-> the settings-> Control Panel-> system-> hardware-> device-> adapters Network Manager. Check if the drivers are installed properly.

    Also give a try to replace the work system network cable connected to this laptop.

    I hope this helps.

  • Can you use a backup disks to another laptop to save your laptop? If so, what are the steps to create a backup disc?

    I need to restart my computer to its original settings, as I just bought. I did the backup drive for my laptop and need a backup disk to restore my computer. Can I use a backup from another laptop, same brand disc and the same software (vista). Can it be done? If so, what documents do I need to create a backup disk and what to put on it. Help, please.

    Hello

    recovery discs are computer brand and model specific

    If you need the drive for your recovery or read alternative methods below

    If you don't have a recovery disk, you must have a recovery partition to do the same thing

    Here are the different ways to reinstall Vista:

    Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    also ask them if you have a recovery partition on your hard drive to get back to the way you bought

    you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

    Ask them of the exact key sequence

    their request also how to make this recovery partition recovery disks

    or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • Windows 7 Mobility Center cannot turn wireless on. This typing of same good wireless network on another laptop.

    I see is no longer the wireless network off the laptop.
    Wireless network is good because I use another laptop with good signal just next door.
    Looking at the display of windows Mobility Center, I can see the wireless network window that says wireless off but the turn wireless on button is grayed out so I can't click on it. I suspect the driver needs to be recharged, but don't know where to find. Any help?

    Thanks for your reply. I couldn't find a physical switch anywhere so I uninstalled/reinstalled the driver RF by the troubleshooting Web site emachines. Everything is good...

  • newbie question: transfer of an Eclipse installation to another project

    Hello

    I would like a project to transfer from one computer to another. On my computer source, I'm under Eclipse 3.5.2 (Galileo). On my new computer, I'm under Eclipse 3.6.2 (Helios).

    I tried to look at export/import options, but when I try to export, it doesn't seem to be an option that works. I tried to export to "Général-> File System", but when I tried to import as "General-> file system" he dumped just the structure of the entire folder in the tree view of the project in Eclipse.

    What is the best way to transfer/copy a project of one Eclipse installation to another?

    Thank you

    Greetings.

    What I do (and it works) to achieve, namely:

    1 copy the folder of the project in the workspace to the version Eclipse desire.
    2. in this Eclipse version, open the new project wizard.
    3. find the project name text field, select "create project from existing source.
    4. go to the target folder, which is located in the workspace, and then click the Finish button.

    Another choice after completing the second step would be to appoint the new project exactly as the name the copied file has in this workspace.

    I hope that you understand and that you will find useful. Good luck to all.

Maybe you are looking for

  • Dell and HD 5770 display port

    Maybe it's more a mug just about shot. I just bought two P2415q of dell monitors. They display only video via HDMI or a DP HDMI adapter. The only way I ever had video off the report of DP was once when I hot swapped the RFP while the HD5770 was still

  • Can't remember name and password to log in to ATT

    For the last days of 3-4, Firefox will remember is no longer my e-mail address and password when I connect on ATT. This is a NEW problem, little, except that I MISS the convenience to everything simply by clicking on 'log in '.

  • Satellite M40x - 112 (PSM4XE) - where to find XP drivers?

    Hello. I changed my HARD drive and now, default, I install a new HARD drive and also installed a new system (XP Home). But now I'm bored a lot of driver (for example USB, W - Lan,...) and I could not find where I can download the correct drivers. Any

  • Windows 7 will this program work? No luck with Vista.

    CREATED ON 16/04/03 SOURCE DISK   Requirements for NetWorth Interactive: Release version 1:9 / 24/96 Disk space: 9 MB Processor: 486-75 or faster Memory: 16 MB RAM Sound card: Sound Blaster Compatible Animation support: Video for Windows Windows: 3.1

  • Acer extensa 7630ez: pilot Win10Network

    Win10-network driver is not compatible with acer extensa 7630ez. After the Win7 for Win10 update the network does not work. WiFi AR5B91 LAN: Broadcom NetXtreme Gigabit Ethernet Acer Extensa 7630ez. There is a callsign (!) in Device Manager. Could you