Installed memory winodows 7 Ultimate no recoginizing

Similar Questions

• Usable memory (RAM) less than the installed memory, showing remove Win7 dual-boot.

  Original title: "Memory (RAM): 12,00 GB (3.62 GB usable)", how can I resolve this issue and remove a dual boot Win7?

  I recently, after experincing problems (see below the Intel SSD), noticed the system said that there is only a 3.62 GB of Ram available in my computer.  I have this statement ' Installed Memory (RAM): 12,00 GB (3.62 GB usable) "the computer has always used a higher around 10-11 GB amount.

  I noticed that the Windows performance index was 5.6, after adding an Intell 240 GB SSD, it jumped to 7.6; However, now with the problems is 5.4, caused by the RAM.

  I ran the full memory diagnostics: start-up and verification of memory it says I have 12 GB of RAM can be used across both.  I asked with Asrock if my RAM and CPU compatible before buying it, and they said it was a wise decision for 970 Extreme4 motherboard.  I subsequently has inquired about the Kingston RAM and included information from a - Data, and they said they used Kingston ringout for approval process as with a - DATA, including the compatibility of the different types of RAM used together.  The RAM was tested and is placed on the store of the computer.
  This problem did not exist until I installed the Intel SSD.

  I don't have a problem with dual boot on my computer after installing a new 7 ultimate on the SSD, and when it worked normally, I atttached the old hd back into your computer, because important data it contains.  This caused a situation of dual-boot.  I did some research and jumped the drive as a slave thinks that it would not cause a problem.  How can I remove Windows 7 from the old hd and then remove the window dual-boot.  I tried the old way to change the startup configuration, however, I can't find it in 7 Ultimate SP1. I also sent the old HD and the start window remained, as the index and the usable Ram 3.62.

  My Questions as already said:
  How can I return to a usable 12 GB of RAM and return the highest Index of Exp Win?
  How the dual boot can be edited to boot from my SSD without window startup and remove window 7 my old HD eventually without formatting?

  The system configuration:
  Processor: AMD FX FD8300WMW8KHK 95W Vichera 3300 MHz

  Memory: ADATA DDR3 1333 AM2U139C4P2 - s 4 GB x 2
  Kingston DDR3 1333 KVR1333D3N9 / 2g x 2

  Graphics card: MSI GeForce GTX 750Ti Gaming

  Motherboard: ASRock 970 Extreme4

  Power: 600 W power supply

  HD: IntelSolid State Drive 240 GB 335 Series

  OS: Windows 7 Ultimate 64 bit SP1.

  The version of the BIOS/Date: 32 MB FRIEND UEFI BIOS legal with GUI support version 2.60

  NISH

  When you are satisfied with your problem is solved, please mark the answer. It helps others see what answered your question.

  If you posted the original question, you can mark the question as yourself have. Just click the mark as answerbutton.
  Source: http://answers.microsoft.com/en-us/page/faq#faqAskQuestion8

  You should see the response from Mark (and have found this useful Me) buttons on all messages, except your own messages, sent by others about your. They are there to allow you to tell other users, messages that you have found useful, and ultimately what solved your problem or answered your question.

• ' Installed memory (RAM): 8.00 GB (3.12 GB usable) ", what does that mean?

  Recently, I added 4 GB memory to my existing 4 GB, for a total of 8 GB of RAM.

  After installation, I checked system properties to find this info.  ' Installed memory (RAM): 8,00 go-go (3.12 useable).
  In addition, 'Windows Experience Index' before when I had a single 4 GB stick was 7.4, now after adding another stick of 4 GB, it came down to 5.9.
  Does this mean the extra 4 GB of RAM, I added is not used and is only slow down my computer?
  If yes how to do all 8 GB of usable RAM and have a higher Index Win Exp?
  The system configuration:

  Processor: AMD Phenom 2 X 4 955, 3.2 Ghz

  Memory: Corsair DDR3 (CMV4GX3M1A1333C9) 4 GB * 2

  Graphics card: Nvidia GeForce 210, 1 GB

  Motherboard: ASUS M4A78LT-M THE

  Power: iBall 350 W power supply

  OS: Windows 7 Ultimate 64-bit.

  The version of the BIOS/Date: American Megatrends Inc. 0801, 17/01/2011

  Assuming that it is memory under-score, it probably means that the memory is not fully compatible

  http://www.Corsair.com/learn_n_explore/ is a website that ensures that you get compatible memory

• Equium L20: How to install memory

  I need to install 1 GB memory in my laptop. I had to remove the cover of the memory but cannot figure out how to undo the devices and access/install memory.

  Can someone give me details... Thank you.

  Hello

  Information and detailed description how to remove modules from memory, you can find in the user manual which must be preinstalled on the laptop.
  Check the optional chapter 7 lights.

• Satellite P200 - Win 7 x 64 install memory 4 GB (3 GB usable)

  Hello

  I update my Satellite P200 (PSPBGA-01W015) for Windows 7 x 64 but I had problem with memory, Windows said: installed memory 4 GB (3 GB usable).

  In the resource material say monitor reserved 1026MB

  When I check the properties of the graphics card, it is said: NVIDIA GeForce Go 7600 with dedicated 256MB of system memory 1279 MB memory shared, 1535 MB total graphics memory.

  I guess that the graphics card occupies only 1 GB of memory but it not there no option anywhere that I can adjust this shared memory (both in the configuration of the Bios and Windows).

  The only version of Bios I can find on the site of Toshiba Australia support for my model is "BIOS Version/Date TOSHIBA V1.70, 21/08/2007' which is in fact only supported Windows Vista.

  Not sure if I can find the similar to the Web from Toshiba Europe site Bios version? The last time when I upgraded my computer to Windows 7, support staff advised me to site of Europe as well, but the model similar to the differently named Euro market. Now I don't remember that match model Europe with my laptop model Australia.

  It seems the support Toshiba Australia not always been well updated Web site. :(

  Thanks a lot if someone have a solution for this. Would be appreciated.

  See you soon
  Anthony

  > I guess that the graphics card occupies only 1 GB of memory but it not there no option anywhere that I can adjust this shared memory (both in the configuration of the Bios and Windows).

  You are right. The part of the main memory is used by the graphics card, but you can not affect the part of the memory that this is manually controlled by the graphics driver.
  If the application being game needs a more graphics memory, the driver assigns this.

• I try to install Zoo Tycoon 2 Ultimate Collection, the computer fine until it reaches the file binkw32.dll

  Original title: zoo tycoon installation freezes computer

  I try to install Zoo Tycoon 2 Ultimate Collection, the computer fine until it reaches the file binkw32.dll, then my computer crashes.  I tried to install the game a couple of times, and this is what happens every time.  Y at - there no fix for this, or any idea why this happens?  This is the first time that the installation of this game on my computer.  Any help would be amazing at this stage.

  Hello

  Your computer meets minimum system requirements for this game?

  Try the following steps, one by one and check:

  Step 1: Run the hotfix in the following article and check.

  Diagnose and solve the program installation and uninstallation problems automatically
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Step 2: Look for the cause to the clean boot.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start, type msconfig in the search box
  2. press ENTER.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

• How do you install memory in Pavilion 17z-F200 (part L2H13AV)

  How do you install memory in Pavilion 17z-F200 (part L2H13AV)?

  HP seems to have no guide available for this model maintenance. What is happening with this?

  I took one the Pavilion 17z-F100 (sent by mistake). There not all removable panels on the underside. And the User Guide for 17z-F200 indicates that it will be the same (assuming that ever happens).

  I'll probably have to remove the outer shell together to install the memory (or replace the hard drive, when the time comes). But, any laptop I worked on in the past had its own special place for screws hidden or something special to that of disassembly. So having an interview guide is a necessity to prevent the pests from plastic, clips, guides, mounts etc..

  Solved by Hüffer here: http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/How-do-I-install-memory-into-the-Pavilion-17z-F2-series/m-p/4836092#M49546

• Is to install a Windows 7 ultimate x 64 in a X 64 based processor will give me at least a performance gain little/bigger with my 2 GB ram?

  I have a Windows 7 Ultimate 32-bit OS in my 2.60 GHz x 64 based Dual Core PC with 2 GB of RAM DDR2...
  If I have the courage to install a Windows 7 Ultimate 64 - bit in my PC with the PC of such specs. x 64 base processor of two hearts... I would gain at least a small performance gain? .. .for what I know... x 64 OS make better/more quickly and efficiently than 32 bit os... with processor intel my x 64, it is theoretically possible? even with 2 GB of Ram only? :/

  64-bit is a little faster IF you have more than the minimum amout of ram. 64 bit min is 2 GB and 64-bit uses more resources than 32-bit.

  I doubt you will see any gain and might even see a loss.  If you can not buy pass more ram, this isn't worth it.

• Why properties system displays installed memory (RAM): 8,00 (3.47 GB usable) GB

  Why properties system displays installed memory (RAM): 8,00 (3.47 GB usable) GB
  Windows Pro 64-bit
  8 GB RAM
  1 TB harddrive
  ASUS P7H55D - M EVO motherboard
  New Windows installation has the same problem.

  Control Panel > system does not show the usable memory, only the memory installed

  The Task Manager > Performance demonstrates both installed, available and free

• Photosmart C4580 installed on Windows 7 Ultimate and it won't work!

  Software installed on Windows 7 Ultimate and I can do everything except printing! When I ask for an example, I see a blank page and the printer does not print. All downloaded from the HP site and I'm tired of installing the update (CPE_SLP_NETWORKMSI_hpcom_000_006) because I don't think it's the solution because I tried several times and now I installed a version of Windows for the fourth time and I won't do it again. Can someone please help?

  With the help of HP customer care, I solved the problem! Problem is that the new installation of Microsoft was not correct. I never formatted the disk before the installation of new, and that was the problem. Thanks for the support!

• Clean install of windows 7 ultimate

  I got a x220t with windows 7 Home premium and I will do a clean install of windows 7 ultimate from a liceanse site that I have through my University. Should I be careful when installing? Also where can I get the drivers from?

  It looks like Lenovo SimpleTap

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-73614

  Edit: only preload can install it in the taskbar automatically.  To get it in the toolbar now, have it installed find SimpleTap on the start menu, right click and pin it to the taskbar

• Clean install of Windows 7 Ultimate 64 - bit on Qosmio X 870

  When I got my laptop (Qosmio x 870) I immediately uninstalled BONES because it was full of bloatware and installed a clean version of windows 7 ultimate 64-bit. After my installation I tried installing the drivers on my laptop, but some do not seem to work.

  My VGA driver installed, but the windows experience index for my graphics is 5.5 which is much lower than it should be (if memory serves right it was 7.4 before I uninstalled the original O.S inflated). However, the biggest problem I encountered is the network driver. I installed all network drivers unique on the page of the Toshiba driver for the qosmio x 870, but none seems not to work. For some reason, the laptop thinks my wifi is disabled, I know that it is not (unless there is a setting in the bios that needs to be changed if not I don't know).

  I really need some help here guys, if someone can me EXACT by the drivers I need this point would mean the world to me. Toshiba really should have a package of essential drivers, as most other computer companies have, it makes everything much easier for people who hate the bloated OS that comes with their laptop.

  > When I got my laptop (Qosmio x 870) I uninstalled immediately his BONES because it was full of > bloatware and installed a clean version of windows 7 ultimate 64-bit.
  In my opinion this is the biggest mistake that anyone can do after the purchase of brand new computer. But you're not alone.
  As a first step before doing this you create recovery discs, and I really hope that you ve done that.
  Second, I can understand you if you say that the recovery image contains many pre-installed tips that you don t like, but you should not install version of the OS. No one force you to use all this stuff. You can remove all the system software and configure OS preinstalled on the way you like it.

  And third, why you didn t post here and picked up some opinions until you started to install own OS? You might get some useful tips first.
  You can install the version of the own BONE but installation of additional things must / should be made after the right installation order. Computers laptops Qosmio have more complicated platform/hardware features and drivers, tools and utilities must be installed on the right track if you want to have all the features.

  Best thing you can do now is to reinstall the OS and continue to install all the extra stuff following the installation order posted by Lasko.

• Windows detects the installed memory (RAM) 32.0 GB. Then there (16.0 GB usable)

  Windows detects the memory (RAM) installed 32.0 GB. Then there (16.0 GB usable). OS is windows 7 64 bit. Why are there only 16.0 GB usable? and how to fix this? Thank you

  For 64 bit versions of Windows 7, Home Premium can use a maximum of 16 GB, Professional and Ultimate can use up to 192 GB.

  If you want to use all 32GB, upgrade to 64-bit professional or ultimate edition.

• How to install memory

  I need help to install the new memory.

  https://eShop.MacSales.com/installvideos/imac_mid_2007_mem/

• When installing memory in Middle 2011 iMac 27 inches with 2-4 GB

  When installing in mid 2011 iMac 27 inch 2-4 GB & 2-8 GB memory is it important that goes into upper slot?

  No, but the slots should have matched in pairs. Pairs should be put in side NOT up and down.