Installing WXP Pro clean on a Portégé 4010

Similar Questions

• Satellite M70: How to install WXP Pro without SP with SATA drivers?

  I know that this topic is discussed repeatedly,
  I get a blue screen when I try to install WXP pro... blah blah blah

  The solution is to install the SATA drive.

  The problem is that I don't have a floppy drive to install the SATA drive, so what can I do?

  Hello

  The use of the disk is the best way to install the SATA or RAID drivers.
  But I searched a bit on the net and found nLite.
  You can use nLite and include the drivers then you do not have to use the
  floppy.

  http://www.nliteos.com/nLite.html

  Good bye

• I have problem with installing WXP Pro on my Satellite M70

  Hello all,.

  I have a M70-160 with XP home SP2 and everything is fine, except a wireless issue. I have a pop-up message that says "limited or no connectivity" when I try to connect to my linksys router. It seems that he cannot take the good IP. I searched the web and found that there is a bug in XP SP2. So I tried to install XP pro (without SP) startup from the CD but when it gets all the checks in the blue screen and then says "starting windows" so I format and clean install, nothing happens. He stayed with the blue screen saying "windows start" for 15-20 minutes, as if long waited. So I turned it off. I tried several times but no luck.

  I just have to wait for a while or is this something else and what?

  I hope understand you and sorry for the big post.

  Thank you

  Hello

  In my opinion, you need to install Windows XP with all service packs.
  I studied a bit in the internet and found this page useful:
  http://www.HelpWithWindows.com/windowsxp/Troub-13.html

  Also check this Toshiba problem page:
  http://support.Microsoft.com/kb/884020

  I think it is enough to download and install the hotfix updates and everything should work fine.
  Alternatively, you can try to reset the router.

• Satellite A60 - lack of drivers after installing WXP Pro

  I installed XP Pro instead of XP home with the PC.
  I can't upgrade because of the other language.
  I downloaded all the drivers of your site, but after insttallation I still have a problem with the FireWire (lack of driver).
  Then I also checked that the drivers of toshiba sure power are missing too.
  What can I do?
  Best regards

  Hello

  on the driver download site, you can download the installation instructions. Follow this order of installation. Toshiba Power Saver utility can be downloaded from the pilot site, too.

  You can also use your CD tools & utilities. There you can find all the programs and drivers for XP. Doesn't matter if it's home or teacher, the drivers are the same. But maybe some drivers from the download site are updated to a newer version.

  Good bye

• Qosmio F10-136 - no sound after installing WXP Pro

  I reformatted my hard drive using the recovery CD, after which, I installed Windows XP Pro. Originally, it was Windows Home Edition that was previously installed. Now, the sound is missing and some components more.

  I tried to download the audio drivers from the Web from Toshiba support site but it didn t work. When executing the installation of the software Sound Max of Analog Devices, Inc., a guest of error is displayed "driver not found, please reboot your computer and reinstall again". Can someone help me on this?
  Thank you.

  First of all buddy you need to update the XP to the last State. I mean to install the XP2 and all patches and fixes available!

  Then you must download all the available drivers, tools and utilities for XP and should install it in the right order.

  The right installation order is mentioned in the installation instructions txt file.

  XP audio driver Analog Devices Inc. v5.12.0.1.5160 is available on the page and it works for sure!

  Check it!

• How to install WXP Pro on Equium A60?

  I have the original xp home installed, but for that, you had to install xp prof.

  What should I do?

  I just replace the existing ot do, I need to format the drive and try again.

  I see a discussion on installation command, where it is written down and I need to worry abou it.

  GY

  Hello

  In my opinion the best way is to format the partition or HARD drive, and restart the installation. In this case, you can be sure that your OS is installed.
  As far as I know that Toshiba drivers are designed for the Windows and Windows Xp home.
  All the necessary drivers for the Toshiba units, you can find on the official site.

  Good bye

• Tecra A8 T7200 - OS Vista Business downgrade to WXP Pro

  Hello

  Because of the software that I use in my work, none of the programs are vista ready, I need to install WXP pro on my new laptop, my Tecra A8 T7200 didn't come with disks of installation for the operating system, drivers, etc.

  Can anyone tell me please what steps must I take to ensure that once installed WXP all drivers Toshiba and laptop computers features all work?
  Help, please!

  Hello

  That s easy.
  You will find on the page of the European driver Toshiba all drivers XP and installation instructions.
  Download drivers XP, check the installation instructions document and follow the guidelines.

  PS; I recommend you to install XP on the second partition. In this case, you can use the two BONES; Vista and XP.

• Question about upgrading to WXP Pro

  I recently bought a model number Equium PSM57E a friend. I got was the laptop and the charger, HDD played upward, so I replaced it with a blank, but now I am installing WXP Pro on the machine and it keeps hanging on me. I just get a message saying "the installation program starts windows.

  There is no light coming on led to show any type of hard disk activity, I was wondering if the laptop was a dud total until I managed to get windows I'm working on it, but trying to take WXP pro as operating system, is beyond me.

  Just in case you are wondering I have flashed and updated the bios, but was wondering if I need a third-party for the disk controller driver as the hard drive seems dead, when you try to upgrade.
  Thanks in advance for any info you can give me.

  Hi John

  It seems that you have an Equium M50 PSM57E.
  One question: are you sure you bought a good laptop to work?

  In any case, first of all, you must check if the BIOS can recognize that the new installed HDD and check if you have purchased a HARD drive that is supported by M50.

  To my knowledge the BIOS supports a HARD drive size limitation.
  This means that not all HARD drive sizes are supported, and may not be used!
  But after some discussion here in the forum the Equium M50 should be able to manage a 100 GB HARD drive.

  Finally and above all remember that you use WinXP Pro, which already supports the SP2. This is necessary and important.

  Good luck

• 5.7 Lightroom will not install on a clean install of Windows 10 Pro 64 bit.  "Problem retrieving some files.  Check space abailable, etc.. "Worked OK on Windows 7 64 bit.  400 GB of available space.

  5.7 Lightroom will not install on a clean install of Windows 10 Pro 64 bit.  "Problem retrieving some files.  "Check available space, etc. and the privaleges of Scripture on the destination folder. Worked OK on Windows 7 64 bit.  400 GB of available space.  Tried changing the compatibility of Wiindows 8 and 7, but same problem.  I am the administrator, so there should be no problem of privileges.

  Clear your tmp folder.

  Restart your computer

  replace.

• Install ESXi 5.1 costs do not see NETWORK Intel PRO/1000 PT Quad Port LP cards

  I recently did a new install of ESXi 5.1 and the server does not see my card Intel PRO/1000 PT Quad Port LP.  This NETWORK card worked perfectly fine when the server had ESi 5.0 Update 1 installed.  I check that the NETWORK card is on the list of compatibility for 5.1.  Everyone knows about this problem?

  Edit: The card on a Dell PE R510.  Onboard Broadcom network adapters work.

  software esxcli vib install d - n net-e1000e /vmfs/volumes/datastore1/ESXi500-201207001.zip

  software esxcli vib install /vmfs/volumes/datastore1/ESXi500-201207001.zip d - n net-e1000

  Network is working

• Satellite Pro L10-103 - USB ports not working not

  Hi, my Satellite Pro L10 - 103 USB Ports do not work. I tried different things and finally my Advisor rubbed my computer clean of all programs and operating system. After reloading of the set up disc and having lost my dear some programs I am no further forward. It still does not.

  Anyone know if this means that it is a mechanical problem with the computer? (I use Windows XP). Your help would be greatly appreciated.

  Hey Buddy,

  As wrote Akuma did you use the Toshiba Recovery disk or the Microsoft Windows disk?

  After installing XP, make sure that Service Pack 3 is installed. It contains important updates and can be downloaded on the official page of Toshiba.

  In addition, try to remove all the USB ports on the Device Manager, restart the computer. Ports will still be recognized and ready to use once.

• Installation of WXP Pro on Satellite P200

  Hello

  I bought a Satellite P200 today and I want to remove the Vista Home Premium and install a WXP Pro, but I can't do it. There the chipset is Intel GM965 Express. I have compiled a DVD with files for the above mentioned chipset inf, but I have problems, if she sees HARD drive as 110 MB instead of 250 GB. I would really appreciate it if you would tell me step by step what to do to be able to install XP Pro. Thank you very much.

  PS: Sorry if I misplaced this thread

  do not take account of my thread... + solved the problem myself. drives the way I solved the problem is using a recompiled Windows xp pro with an ich + inf for intel. ;)

  long live mates them.

• Installing WXP on Satellite L30 - 10Y

  Hi all

  I have a Satellite L30 - 10Y (PSL33E 03L031EN) (about 2 years), it is running Vista (installed come) and I'll replace it with XP pro SP3.
  I already have the drivers (from the Division of driver Toshiba), but I wonder if there are any issues that anyone knows how I could run in this case?

  I installed OS to my house several times, built offices with absolutely no problems whatsoever, but various articles I read there seems to be a bit of a 'ball game' different when it comes to laptops?
  Also I have Vista disks more so if XP will not install I can not simply go back to Vista.

  Tips, advice or warnings very welcome...

  Thanx

  ~ Q ~

  Hello

  Your laptop is supported for Windows XP Home edition, and there should not be any problems at all. For installing WXP using Windows XP SP2 home edition.
  Download page for all the drivers, tools and utilities that you can find on Toshiba.

  You can also find document Setup Instructions. Install all the stuff of Toshiba following this order of installations. It is very important.
  If you help please let us know.

• M35-S359 - need WXP Pro CD recovery (or drivers)?

  Are there recovery M35-S359 XP PRO (SP2) CD or drivers that I receive? I have the CD Home Edition, but it does not help with the brightness of my screen.

  I am mainly interested in getting the function keys to work to make the screen brighter. All the other drivers, I was able to download and install successfully. BUT I have problem find the function key drivers. I tried to install Power Saver and install Hotkey. The energy saver fails to install and the installation of the shortcut key did not help.

  Any idea? Thank you in advance.

  Post edited by: milucky

  Hello

  As far as I know all the drivers, tools and utilities can be used with WXP Home and Pro. There is no difference. If you have installed the Pro of CD version of the version full of Microsoft, you must install all the stuff only Toshiba. Your device must be an American model, and everything else you need you can find on the download page of Toshiba U.S. under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

• Installation of WXP Pro on Satellite Pro L40-15 has

  Hello

  Just got a Satellite Pro L40 - 15A, its currently got vista home on that and I'll have a go at put WXP Pro on it. Anyone who has tried this? First thing that I'm doing, is integrate the SATA drivers in Windows XP Home edition with nlite. Got Intel Matrix storage drivers which I assume are the right ones. One else you have that works? Also, I've seen there are a few updates to the BIOS, anyone put these yet? Are these worth it, updated the BIOS always makes me nervous!

  See you soon

  Cat scrap

  Hello

  It doesn´t matter which model, because you can use the users for EACH model installation instructions. So, just pick up all the necessary drivers and install XP as the guy described it.
  I did it on a Satellite A100 and it works like a charm. :)

  Welcome them