instance of the device driver is still in memory (Code 38)
Just to complete this thread with a possible solution:
A pilot version of Linksys seems to have solved this problem.
3.0.10.0 driver date: 18/01/10
After the installation of this driver, under Driver Details both files must indicate
netr28u.sys version 3.00.10.0000 file
vwifibys.sys file Version 6.1.7600.16385
Tags: Lenovo Products
Similar Questions
-
(KEYBOARD ERROR)
Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)
Hello
I don't know how it happened.
I tried unistalling the software but have the same problem when connected to e
Help, please
Hi Davedirect,
· It's a wired keyboard or a wireless keyboard?
· Who is the manufacturer of keyboard?
· Since when are you facing this problem?
· You did changes to the computer before this problem started?
· Have you tried to restart the computer and check if the keyboard works normally?
However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below. More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.
Step 1
Remove the drivers from the computer. To remove the drivers to follow the steps below:
a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".
b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.
Step 2
During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:
a. Click Start.
b. access control panel > system > hardware > Device Manager.
c. open Device Manager and expand the keyboard device.
d. right-click on the device keyboard and uninstall the device.
During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.
Step 3
Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.
Access the link below to learn more about the error code 38:
http://support.Microsoft.com/kb/310123
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I can't get my Dell Insperion to recognize a second SD card. It will recognize a card inserted in the integrated housing initial, but later maps not be recognized. If I restart the computer then it will recognize a card again. I get the following error message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) "your help would be appreciated.
SD memory card
Device type: hard drives
Manufacturer: generic
Location: SDA Standard compatible SD Host Controller
Error message: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)
Driver provider: Microsoft
Driver date: 2006-06-21
Driver version: 6.1.7601.17514
Digital signer: Microsoft Windows
Driver details
C:\Windows\System32\drivers\partmgr.sys
C:\Windows\System32\DRIVERS\sffdisk.sys
C:\Windows\System32\DRIVERS\sffp_sd.sys
File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)
If you try to insert two cards at the same time that would be normal given that the card reader is bound to a single channel of USB. It all depends on how your computer has been configured when it was built.
If you remove the first card and insert another card it is possible that you are not just right-click on the map in file Explorer and ejecting the card before you remove them.
-
I just downloaded iTunes and now my = CD-ROM/DVD-ROM Drive does not work on my Compaq laptop. This is the error that he sees when I go to Device Manager. I need this problem as soon as POSSIBLE, I work on websites and I can't go without my CD burner. Anyone who can help help please. I'm panicking right now.
Thank you
Hello
Use system restore to before that you installed iTunes when the drive was working.
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
======================================================If necessary:
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
My monitor driver displays a yellow fault icon in Device Manager. Okay, the Windows driver is installed to update controls and says it's the last and correct driver, but he is not able to load. Several reboots, uninstall/reinstall etc., do not make this work.
Is there a way to identify what this "previous" Forum, it's that it refers to and a way to force his removal?Any tool give more details about the cause of this problem of Code 38?It is a new machine, Win7 64-bit, SP1.Thanks, I had already read a lot of answers to this question even where people say 'just run the troubleshooter', but is making the assumption that it is in fact an option of troubleshooting on the pilot. In my case, there was no.
This is a new PC with a fresh new install of the operating system of the OEM, but they did not have my monitor when you install the operating system. The problem here is the value default Windows drivers have been installed and refused to be uninstalled, whatever my install the appropriate driver.in any case, found the solution I was looking for, just couldn't remember what to look for at the time: twist the Device Manager for a full view of the devices more [http://technet.microsoft.com/en-us/magazine/ff184583.aspx]There were 3 different monitor drivers installed by Windows that were not deleted after that right has been installed. The parameter DEVMGR_SHOW_NONPRESENT_DEVICES let me delete them. -
I try, nothing works. I try the system restore, try supportmicrosoft.com and they fix it, but when I open the Device Manager, my cd/dvd drive are still '? When I install the new window to solve the problem, window would not install the new program because it says I have no device driver for the cd/dvd drive.
Help.
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHope these helps.
Rob - bicycle - Mark Twain said it is good. -
I have Windows 7 and all of a sudden my iPhone 3 G will not sync with my laptop. The computer has stopped recognizing the phone being connected at all, and yet he is recognized in iTunes. When I plug in the phone it gives me the message... device driver failed to install. I know it of a compatibility problem and have searched through the forums and was on the phone with the support of Apple for FOUR hours and nothing has worked. They even sent a new phone, and it still does not work. HOW can I find the driver that needs to be updated? I checked in the device under the universal Bus Port Manager and it indicates that the Apple driver is up-to-date. He sometimes let me to sync my contacts and calendar errors... but without music, photos, ringtones, etc. Help, please... I lost tons of time on it!
Hi regsiler,
I suggest to open the Device Manager and in the view tab, click Show devices. Remove all instances of the device, and then restart.
The phone begins to change when it is connected to the computer?
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.
WUDFRd failed to load of the device
Hello
I did a clean install of Windows 7 64 bit and everything goes fine until I started to add the specific drivers of lenovo t61p. I get the following in the Event Viewer error message:
The \Driver\WUDFRd failed to load the device driver USB\VID_0483 & PID_2016\5 & 295bd535 & 0 & 2.
After a lot of Googling, I found that the usb device is a fingerprint reader. remove the fingerprint reader drivers removes the error in Event Viewer.
AuthenTec TouchChip fingerprint coprocessor uses the v1.5.0.289 driver. their website States that the error is a problem with Microsoft. See this link:
http://support.AuthenTec.com/Knowledgebase/KBview/tabid/843/ArticleID/443/WUDFRd-failed-to-load-for-the-Device.aspx, or search their Knowledge Base for "WUDFRd failed to load for the device.
I see that the other members of the forum answers have similar problems, but they still have to find a solution. is that someone in Microsoft could provide an update for a fix?
Yes! After two years, I found a solution. I installed a previous version of Lenovo sw fp and it fixes attention on win 7 sp1 2 t60. I've been running for about 3 weeks and warning went on two PCs. then, download and install IN1FGP08WW1.exe. It is fp s-o of Lenovo in UTEK and there the pilot to clear the warning. BUT it's not as safe as the current Lenovo sw fp. Apparently, she was abandoned when authentic bought UTEK because of this. as I understand it, if someone has physical access to your pc they can decifer pw of windows in the registry. This isn't a big problem for me.
-
How can I find the device driver (DOT4PRT)
HP printer says miss me the device driver (DOT4PRT) I don't know where to find or how to download.
HP printer says miss me the device driver (DOT4PRT) I don't know where to find or how to download.
HP includes a port DOT4 printer with HP printer driver installation.
You don't really need this (you can use the standard Windows USB port), but it provides a few extra bells and whistles.
Uninstall and reinstall your HP printer as shown here: Article 1
-
I'm trying to move from xp to windows 7. I spent all the requirement but she says to install the device driver required to access your hard drive, insert the installation media containing the driver files and then click OK. "what should I do? Where can I find the driver?
Guess he would seek software/drivers for the chipset MB
& sata/IDE controller software. Get the MB hardware specifications, go to the mfg
Web site & download the software and drivers. If intel, download the chipset installation
utility & install it 1. The other would be the SATA or / and drivers for the MB IDE
controllers, 'Matrix Storage console' would be the one, also chk for desktop
Internet downloads, amd, and other brand materials would be substantially the same.
-
I have a Toshiba Satellite A105-S361 and I get this message: Windows successfully loaded the device driver for this hardware, but does not the hardware device. (Code 41)
Hello
I suggest to refer to this link, scroll down to error code 41 and follow the steps and check if that helps:
http://support.Microsoft.com/kb/310123
It will be useful.
-
my external hd will not appear in my computer, it is in the device driver and says working ok
my external hd will not appear in my computer. It is in the device driver and work very well, and it shows in the hard drives and says working properly. I turn it on then it is not in my pc so that I can usr it t / you rick * address email is removed from the privacy * or * address email is removed from the privacy *.
Hello
Check your drive in computer management. Click Start-> run, type &-> compmgmt.msc-> navigate to storage-> disk management.
On the right side, make sure your external drive-> Rightclick and assign a drive letter.
I hope this helps. -
Original title: the answer useful?
Help, please! Windows cannot load the device driver for this hardware (HL-DT-ST DVDRAM GH40F SCSI CdRom Device) because the driver may be corrupted or missing. (Code 39)
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
drive is Matshita DVD-RAM UJ-850 s a SATA drive
I use windows Vista
Driver provider Microsoft
Day 21/06/2006
Version 6.0.6002.18005
Hello
Code 39 means that the driver is corrupted or missing.
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.--------------------------------------------------------------
Also check with your system manufacturer to see if there are any updated drivers for your DVD. Or even if it
are you can reinstall the 'old'. Many use Windows default drivers however some special aura
ones. Also check the website of the manufacturer of the car.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
Original title: Pny flash drive problems
I used my flash drives on my pc with xp as os without problem. I then took the same flash drive for my laptop with the windows operating system 7, I opened the files. Then I went to the computer with xp, and the pc does not recognize the flash drive. I get a code 28, pilot not available and the code 19 registry damaged. How to solve this problem?
Hello
Do you see these error codes in Device Manager?
Plug the flash drive and run the Fixit of the article below and check out them.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/See also the section below, which might be useful in solving the problems of USB devices.
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575
Maybe you are looking for
-
How can I change a hard drive to an old drive sata150 sata300
I just replaced my old hard drive with a new one, the old rate was sata150 but my other can go to 300. How can I display this, I have a desktop hp paviilion m7580n computer. My old drive was also a 300 GB, my new is a 1 TB drive. Thank you
-
Is it true that I can not run more than 60 Hz on screen?
Is it true that I can not run more than 60 Hz in 640 x 480 on my laptop with nvidia go 7600? or is there a driver for my lcd screen...?
-
I can't start windows, it says system32\config\system is damaged or missing I tried the recovery console and boot from the cd that it won't start any ideas?
-
Error 1722 when installing J2se Runtime
Hi, can someone help me please? Trying to install Java Runtime from a Java interactive training cd I get the error message There is a problem with this Windows Installer package. A program run as part of the Setup did not finish as expected. Contact
-
Windows 7 32 bit can not find the driver for printer Photosmart Premium C310a
I recently had an update to the product directly on my printer Photosmart Premium C310a on Internet. However, this then to Windows 7 (32 bit) to search for a driver for the printer but it could not find a. If I click on devices and printers, it sho