Intermittent problem "USB not detected" Genius Traveler Laser 315 mouse.

Similar Questions

• Before left SS USB not detected & gt; Model: 20-a220l & gt; Series of PC all-in-one HP Pavillion 20

  Dear concerned

  My PC: Model: 20-a220l > HP Pavillion all-in - one PC series 20,.

  Operating system: WIndows 7

  AV - SS USB not detected by any modem or USB key left right back side - USB 2.0 work.

  Rgds/Khalili

  Hello:

  You can have a TI USB controller.  See if this driver USB3 works...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-104401-1&cc=us&DLC=en&LC=en&OS=4063&product=5192630&sw_lang=

  If this driver does not work either, please complete the following steps so I can know what model USB3 controller motherboard in your PC is using.

  Go to Device Manager, find the other devices category, then click on the USB controller needing drivers.

  Then click on the Details tab in the upper part of the window USB controller.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters you see in the window.

• Keyboard USB not detected

  My old PS2 Keyboard was fine, but whatever I do my computer does not detect my new Microsoft USB keyboard at startup. I get the error message "keyboard error or no keyboard present".

  I currently have two keyboards on the go, one to start the computer and the other to type with. It's stupid.

  Any help would be welcome, even if I don't know I missed the obvious solution.

  Alan

  -If I understand correctly - your problem is that, until Windows starts, your USB keyboard is not detected?  After that it starts - it is, and it allows you to type?

  If the answer is Yes - your problem may be a simple BIOS setting (nothing to do with Windows) or a lack of support for USB devices at startup.  Can't tell without knowing more about the computer (brand/model of the system as a whole or the motherboard - depends on whether it is a third level machine (Dell, IBM, HP, etc.) or a system of fragmentary, put in place by you or a friend/etc.)

  --
  Martin Stanley
  --

• Key USB not detected by the computer.

  Original title: Cnmemorysoftware

  If I put in my Spaceloop by CnMemory; I don't find them in my PC computer.
  So I can't work between the hard drive and the stick.

  Hey Manfred,

  Thanks for the reply and my apologies for the previous post helped you.

  1. did you try in another computer and see if the problem still occurs?

  2 have you tried another USB port?

  3. other USB devices connect properly?

  Please follow the methods to solve the problems of connectivity USB in the computer:

  Method 1:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: Uninstall the USB drivers:

  1. Click the S tart button
  2. Select Control panel
  3. Open Device Manager
  4. Expand USB controllers
  5. Right-click on each USB drivers and select uninstall
  6. Restart the computer

  Reference article

  Install a USB device

  http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Please post back with the result. If the problem is still not resolved, we will be happy to help you further.

• Satellite L500-247 - mouse USB not detected

  Hello

  I have a Satellite L500-247, Windows 7. Long ago, I tried to use a USB mouse and it worked (plug-and-play) without problem. Yesterday, I tried to do the same thing and I tried 3 USB mouse, but no one works with me. I don't even get the window that says new hardware found. I plug in the USB mouse and nothing happens. I tried to put them into the other USB port, but also the same problem.

  I can plug in the USB and the laptop can detect it smoothly but with the USB mouse, the story is different. I don't know why :(

  I think that there is a problem in the USB voltage or sth like that!

  Can someone help me!

  Hi laith12,

  Probably there s something wrong with USB drivers or something, but I doubt s it s a hardware problem USB ports because USB key will be detected

  Did you install additional software or the USB mouse driver? In some cases they could make problems with USB devices so I n t install the mouse software and a USB keyboard.

  What you can do is to remove the USB ports on the Device Manager and restart your computer. Try also updating the driver from the official website of Toshiba chipset.

• CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

  I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• IntelliPoint 8.2 will not detect the 4000 Wireless Mobile mouse

  I'm running Windows 7 pro 64 bit on a mobile workstation Dell M4800.  I bought a mouse Wireless Mobile 4000 which is supposed to have programmable buttons.  I went to the web page of material/downloads and downloaded Intellipoint 8.2 who is supposed to be the software for this device.  The software installed with no problem, but it will not detect the mouse and I can't program the buttons.  On the devices tab, the program detects the touch pad mouse and Dell (listed as compatible mouse HID).  The mouse works with the basic functionality, but I need to program the buttons

  Hi John,.

  If you have installed the correct versions for the mouse, then, it could be a problem with the mouse settings associated with the soft keys.

  For confirmation, this is the link for the latest driver:
  http://www.Microsoft.com/hardware/en-us/d/wireless-mobile-mouse-4000

  If the driver is in place, I suggest you to contact the Microsoft Hardware support for additional help:
  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Please let us know if you have more queries on Windows.

• Connectivity USB not detected at all on 1132 MFP

  Hello, I'm trying to understand this... the 1132 MFP turns on and works as a copier but it is not at all detected

  via a USB connection. Plug and unplug the USB cable do not produce any reaction from the PC either.

  I have replaced several USB cables, change of the USB ports on my computer nothing happens.

  Everyone is in a similar situation?

  I think the USB module is turned on the printer, but any feedback is much appreciated!

  Thank you

  Hi bleduri,

  I can't wait to hear that you have questions.  What is the exact model of the (M1132 MFP Laserjet, Deskjet) printer?  Given that the PC does not respond when you insert the USB it is possible that the PC port or printer is defective, but it is also possible the problem is with conflicts of USB or software related issues.  Please follow the steps in the following link to isolate if hardware is defective, other or software device conflicts are listed as being the issue. Click here

  I hope this helps!

• USB not detected at all

  Hello world

  New to the use of VMWARE, but I'm doing a project. Since I use a 64-bit operating system and I need a 32-bit I use virtual machine to run windows XP.

  I have read many topics and continuously see people saying ' go to vm > settings ", and I'm completely confused to where it is. I have looked through my computer for him and do not understand what people point also.

  My camera is the MSP430 and it is detected on my windows 7 64 bit, but it fails to connect to my xp. Previously, he has worked perfectly well, but suddenly, he refuses to work. On my tab devices, one who is stuck, I have that sounds and cd disk to network. Previously, he showed my key USB and my MSP430.

  If anyone can give me direct instructions to solve this problem, it would be great.

  Thanks in advance!

  Edit the vmx file and set the values to 'true '.

  and while you're busy - also fix your browser - it does not display file extensions properly

• LaserJet Pro P1102w installation problems - USB not recognized during installation

  Struggling to configure the P1102w - using the installation DVD that accompanies it, I go through the steps. When I get to ' turn on the printer, connect the USB cable to the computer ' the printer is not recognized. Is not dismiss it, he just can't get it - it is with Windows 8.1.

  Tried it on another laptop running Windows 7 - same problem. The installer sat on the market "in waiting to connect to the printer via the USB port.  When you connect, Windows recognizes a USB device and tried to install the device - came with an error that could not be recognized and need to contact the manufacturer for the installation files.

  Update Windows, computer rebooted several times, deleted the HP installation files and tried with drivers downloaded from HP website - same problem.

  Any ideas?

  I had the same problem when working on a clients computer.

  (1) it has been infected by viruses, so we had to make a Virus removal on his computer.

  So you want to make sure that your computer is virus-free

  (2) in most Windows 8 HP computers in particular, drivers automatically installs on the computer.

  Check your device manager and click on printers. It will show what is connected.

  On my computer it shows printers >

  HP P1102W

  I had to uninstall it, to install the software. Once I did that the computer was able to recognize the USB cable.

• NEITHER 6221 USB not detected at startup XP

  Hello

  Got a USB6221 running hotel.

  The problem is I have to be the device power cycle or to remove and replace the USB wire to get the detected device when I start windows XP.

  Research in the Device Manager, the action mentioned above the hang of "Data Acquisition hardware" and there is no other problems... until I turned off the pc and commissioning the next morning!

  Incidentally, the 'Acquisition of equipment of data' are automatically detected on a PXI system with a built-in controller.

  Has anyone else had this problem?  Anyone offer a solution?

  Thanks in advance.

  Dave

  What DAQmx version do you have? We have solved a similar problem by DAQmx 9.0.2.

  Thank you

  Andrew S

• External hard drives and USB not detected after installing windows 7

  Original title: does not display the hard drives laptops, but do sticks

  for some reason any lately
  any laptop computer portable hard disk or 3.5-inch usb drives work, but do memory sticks
  some show in computer management, some don't
  I've updated the mb drivers
  trying to not format to fix this little problem
  ideas?

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the brand and model of the computer?

  3 have you tried plugging the laptop hard drive on different USB ports?

  I would suggest trying the following steps and check.

  Method 1:

  Run the utility of Windows troubleshooting for hardware and check.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Check if it helps.

  Method 2:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 in the article.

  Method 3:

  Throw a virus with the Microsoft Safety scan scanner to make sure that the computer is virus-free.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Safety Scanner WARNING: There could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Let us know the results.

• HP 860-NL100 want Phoenix Desk: 860-NL100 HP Envy Phoenix office not detect a keyboard and a mouse

  Hello
  Why when I try to install windows 7 64 - bit PC does not recognize the keyboard and mouse?

  The place in the bios they work properly.
  Thank you Marco.

  Spoiler (Highlight to read)

  Thank you

  Spoiler (Highlight to read)

• New X61s does not detect its own ThinkPad Bluetooth mouse to the initial configuration.

  
  
  

• Since the L7680 installation my usb ports are not detected...

  It seems that something in the registry has been changed.  My Western Digital Passport (mass storage device) is not detected is not my SanDisk Micro (2G).  Western Digital will work in the USB from the printer, but don't the SanDisk.  I've lost the use of all of my USB ports on my computer processor and montor.  They used to work before installation.  I uninstalled and reinstalled, I check startup items in MSCONFIG.

  I read on the Microsoft support page which the hkey_local_machine\system\currentControlSet\Control...

  should be set to activate, but I do not have this folder in XP.

  Western Digital does not know what is happening, or not SanDisk.  HP really gave me the run around way to uninstall and reinstall, but I didn't get an answer that solves the problem.

  It seems to me that since it was drivers from HP which caused my other unit to pass unnoticed, HP should be able to tell me how to solve this problem.  I do too much research for a new product.  I know I'm very frustrated, and since this is a new printer I still have time to take it for something that's going to work.  I had a Dell that has worked well, I wanted to just an upgrade.  I guess I could have updated by Dell.

  Just about the evacuation, someone has an idea what the fix is for my USB not detected ports that have been replaced by the reader on this printer?

  I added a new HP printer to my set all my ports no longer works. None of my flash drives or removable hard disks worked. I tried everything and then read "ports must be updated". My computer is older than three years and the ports of origin are 1.1 and are of most new USB 2.0 devices. Long story short, I went to microcenter and bought new ports ($11.00) and add them to my computer. All ports are now functional.