Similar Questions

• Microsoft Arc Keyboard not recognized by the keyboard software

  Hello

  I recently bought an arc keyboard. Although the keyboard works fine, it is not recognized by the software intelitype.

  When I run the software (downloaded from the support section of the arc keyboard), the key settings tab says "no keyboard microsoft usb not detected"

  The Hardware tab says:

  "HID keyboard device.

  Manufacturer: (Standard Keyboard)

  Location: On the Microsoft Hardware USB keyboard

  Device: This device works correctly

  ***

  This is a wireless keyboard, it works, but I can not find a bluetooth device that is associated with the wireless.

  Reinstall the hard and software do not solve everything and I could not find a solution on the web.

  I am running Windows 7, 64-bit.

  I could use some help here!

  Thank you

  Hans

  Hello Hans,.

  Thanks for posting your query in Microsoft Community.

  I understand that the IntelliType software is not able to detect the keyboard of the CRA. The question could arise for various reasons, including a faulty hardware, damaged driver etc. I would suggest trying the following methods and check if they help to solve the problem.

  Method 1:

  Run the hardware and devices troubleshooter. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.
  Open the hardware and devices Troubleshooter

  If the issue still not detected or resolved, proceed to the next method.

  Method 2:

  I suggest you try to install TWO software provided for Windows 7 in the following link of support for Microsoft Arc Keyboard. Check if the keyboard is detected.

  Microsoft Accessories: keyboard Arc

  If the problem persists, I suggest you refer to the following article which allows troubleshooting of common keyboard problems.

  Troubleshooting: keyboards

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Other results: preliminary report does not properly during the first run in a loop

  I have an unusual problem with NI TestStand 4.1. I have a loop For and it contains, I have a call from sequence configured as a test of numerical limit. This test is configured to report additional results. All other results are preconditioned test cases. Here's the unusual part: during the first iteration of the loop, the test passes yet additional results for the parameters of all inputs are reported (output parameters are not presented at the time, but more on this later). Spend all additional this test iterations in the loop For and additional results are not reported.

  Regarding output parameters... If a test fails I'm expecting (input and output parameters) results to report. However when I encounter a failure only the additional results that are output parameters are displayed on the test report. Input parameters are not reported.

  If anyone else has experienced this? My expectation was that all additional results would be declared in case of failure. In addition, in the absence of a failure I expect not to see additional results. Thanks in advance!

  The short answer is that the condition of additional results for input is evaluated before it's called the subsequence, so that it uses the value of the previous iteration Step.Result.Numeric (or by default on the first).

  You can see this described as stage 15 in the following link:

  http://zone.NI.com/reference/en-XX/help/370052P-01/tsfundamentals/infotopics/step_execution/

  Kind regards

• Foreign key constraint, not recognized during the synchronization of data with the model dictionary

  Hello

  Data Modeler is a foreign key constraints do not recognize when synchronizing data with the model dictionary, although the foreign key is there (in the database that a data dictionary is read). I can't find any criterion when a foreign key is not recognized by the Data Modeler. Are there limits to the length of the attribute, or the number of columns in a foreign key, or other limitations which may lead to this behavior not to recognize a fk by Data Modeler? I have columns more than 32 characters. I compared with the fk is recognized by DM, but I can't find anything that indicates why it is not recognized.

  I wonder if someone also has constraints of foreign keys that are not recognized in the comparison of data bases and model?

  Thank you

  Robert

  Hi Robert,.

  Thanks for the comments, I logged a bug.

  Philippe

• Satellite L670-1HJ-speakers interns are not silent during the selection of line output

  I want to use an external set of speakers, but when plugged, selection of output in the Realtek HD Audio Manager disables the internal speakers, instead only reduce their volume a little. Selection headset does not switch their stop, but this causes audio being sent to the levels of helmet, which sounds terrible on normal speakers and is therefore not an option.

  Is there a way I can get it to turn them off when you use output line too or just disable the internal speakers in total?

  Have you checked all the available sound settings?
  Open the properties of the sound > playback devices and try to disable the speakers out there.

  I only helmet and, unfortunately, can not test it for you, but there must be an option where you can turn off the internal speakers.

• Started at Mo and not charging with the charger connected. Charger works. Keyboard not workin except power button / stop. Restarted using ex in car without success. SW

  Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.

  MacBook, 2010, Mac OS X 10.6.8

  Hi Veronica Steward,.

  I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
  

  If your Mac will not turn on - Apple Support

  Let us know how it goes and thanks for coming to Apple Support communities.

  See you soon.

• Keyboard Dell Bluetooth is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.

  My Dell Bluetooth keyboard is not recognized when energy savings and will not wake my computer. My usb mouse not recognized or the other.  I use keyboard now, but it seems not be installed yet when I check my keyboard or bluetooth devices. Keyboard does not work after so I'll try to figure out what to do before moving into the power saving mode. Help, please. I did all the updates from microsoft, and there is no update for my bluetooth device, I checked.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the model of the keyboard?
  3. are you an error message or error code?
  4. which version of the Windows operating system is installed on your computer?

  I suggest you to consult the following Microsoft article and check if it helps.

  On troubleshooting in Windows 7 power management: http://support.microsoft.com/kb/980869

  Troubleshoot keyboard: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-keyboard-problems

  Keyboard and Microsoft mouse refer:

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Reference:

  Troubleshooting external Dell Wireless or Bluetooth keyboards and mice: http://support.Dell.com/support/topics/global.aspx/support/KCS/document?docid=277550#Issue0_1

• We get the popup "USB device not recognized", when nothing is connected.

  Original title: pop up message

  I connected the USB cord to transfer information from your old phone to new phone via Itunes.  Since that time that I keep getting a pop up message that says: device not recognized USB, the defective device, windows does not recognize.  Nothing is plugged in, but message appears every few seconds.  How can I get him to stop?

  Hello

  It seems that you are getting the popup "USB device not recognized", when nothing is connected.

  What is the brand and model of your computer?

  I suggest to uninstall the USB controllers and check if you get the context menu.

  
  

  Method 1: Remove and reinstall all USB controllers

  
  

  a. clickStart, type devmgmt.msc in the start search box and press ENTER.

  b. expandBus USB controllers.

  c. right-click on each device under theBus USB controllers node and then click Uninstall to remove them one at a time.

  d. restart the computer, and windows will install the rear USB drivers.

  If reinstalling USB host controllers fails to resolve the issue, go to method 2.

  Method 2: See the procedure suggested by johnkelly46 responded on October 26, 2009, from this link.

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Microsoft Wireless Comfort Keyboard 4000 not recognized on the new 64 bit Windows 7 computer.

  Microsoft Wireless Comfort Keyboard 4000 not recognized on the new 64 bit Windows 7 computer. The computer thinks I have a keyboard 600 wireframe. I tried to install the IntelliType 8.2 64-bit for Windows 7 driver but it tells me that I already have a newer driver installed and won't let me install it. Are there specific drivers for this keyboard. I love the keyboard but I can't customize the special keys.

  Hi Tom,

  Check out these links and check if it solves the problem:

  "Troubleshoot the Intellipoint or IntelliType software installation, LifeCam.

  http://support.Microsoft.com/kb/953691/en-us

  "Troubleshooting: keyboards"

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/keyboard/wireless-Bluetooth

  Please let us know about the status of this issue.

• I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightr

  I recently bought a new camera from Sony a7 - ii.  the first time I tried to import raw images taken with it (with a. Suffix ARW) the program says "Preview not available for this file" and then "files are not recognized by the raw format support in Lightroom" I have the most updated version, I think as 5.7.  What should I do to get these files imported as raw files?

  Hi Bobsirkus,

  The camera you have is compatible with the latest version of Lightroom, which is Lightroom 6/CC.

  Please see the list of the camera supported by Lightroom: supported by Adobe Camera Raw devices

  You can use the DNG Converter, converts images and then import them into DNG in Lightroom.

  Kind regards

  Tanuj

• TV not recognized by the server-> 40L 73

  Hello

  My problem is already listed on this forum but I can't find a solution or explanation.

  I recorded with a Toshiba account in order to use the "smart" features of my incl. TV services VOD as Maxdome etc...

  Whenever I push the button 'cloud' I get the message: "your TV was not recognized by the server. Press OK to re - connect to the server... »

  When I press OK, it will start to accept T & C, privacy, user name, password, etc... The connection will work with my current username and password...
  But unfortunately he will not stay for the next time.

  Call the hotline they suggest to send the unit for repair... I can't believe that there is a problem with my TV... But server.

  Any suggestion? May be related to an IPv6 Internet connection?

  In addition, even, I would say I'm a fan of Toshiba, my TV's performance are simply bad. When I have the cloud works, it takes two minutes until Maxdome should be started.

  And can someone tell me WHY I need to get into the clouds to access my saved content? Or Media Player? This content "offline" should be much more quickly accessible.

  Thanks for your help and your comments in advance.

  Maybe you should just a few solutions of circumvention of the Commons:
  First, you must set the default TV.
  Then configure the internet connection once more and then try to connect to the cloud to accept all of the terms and conditions, privacy and other things.

  By the way: you should also check if your firmware is up to date. This can be checked here:
  http://www.Toshiba-OM.NET/firmware.php

• blank resource visa info during the first round

  Hi all

  I am trying to run the pilot of 6100 fluke on a fluke remote 6100.  When I run the initialization of the remote device, I always get the following error message:

  VISA: (Hex 0xBFFF000E) the given reference of session or the object is not valid.

  I followed the problem and saw that the visa being passed resource name contains no valid information (see below).  That is not sensible, since when I select the name of the resource from the drop-down list, the program has clearly recognized the remote device.  Why the program allow the user to select the resource of visa but won't visa valid for driver information?

  This error occur only during the first inning.  If the user run the program again, the error disappears.  Can anyone help?  Thank you!

  Yik

  When the program is run for the first time, visa name contains valid information:

  General

  The resource name of the canonical VISA = blank

  Visa refnum = white

  Session ID = 0

  I/O timeout = 0

  Type = 0 INTF

  Value = empty

  Stop? = True

  Condition

  session valid? Fake

  Instr is? = False

  Stop? True

  AHA!

  You select the resource from the drop-down list BEFORE the start of the loop?  An SR might help

• A SSD from OCZ Agility 3 disc works with a dv9700T? Mine is not recognized by the BIOS.

  I bought a 120 GB OCZ SSD Agility 3 disc to install in my laptop the dv9700T CTO.  The drive is not recognized by the BIOS when it is installed in the Bay of 1 or 2, but is recognized when connected via USB as a secondary drive.  The drive works fine in a different computer, so I know the drive works.  There seems to be a problem with the SATA (ICH8) controller.

  Someone at - it any information on that?  Would love to get the drive works in my laptop.

  Thank you.

  Lloyd

  If you have a HARD drive installed in the secondary Bay and the OCZ SSD in the first Bay, the dv9700t starts and works very well.

  Lloyd

• 6 10 iPhone iOS is not recognized by the laptop Win10Pro

  6 10 iPhone iOS is not recognized by the laptop Win10Pro

  After the upgrade to iOS 10 on my iPhone 6, is is no longer recognized as an external drive by my Win10Pro x 64 laptop on USB 2.0 or 3.0 port. New cable is used to eliminate that as a problem.

  Why is this happening?

  I come to the last iOS 9.x.x?

  Y at - it and the new driver I need to download on my PC?

  I started to automatically backup icloud, but I want to import photos directly to my PC.

  Thank you

  Vicki

  Try opening the iPhone before connecting to Windows. If the film is not empty, then the device should be listed in Windows Explorer. If it still does not show try to restart the computer and the device, and then try again. If it does not show more in iTunes then try iOS device is not showing in iTunes for Windows.

  TT2

• HARD drive is not recognized on the Satellite 2800 200

  Hello

  First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

  I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
  When it is started is says "insert the disk in the drive system. Press a key when readya?.

  My bios is ACPI BIOS version 1.80
  In Pheripheral in Bios it says disc hard = not used Mode.

  On page two discs i/o: HARD drive: no drive.

  I tried two hard drives and the two were not working and not recognized in the BIOS.
  I have no CD of restoration.

  My questions:

  What kind of central computer has this laptop?
  Can someone help me with the recovery CD?
  What can I do to fix this?
  How can I change my BIOS so that the HARD drive is recognized?

  My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
  But also with the disk hard 10 GB of origin, I had the same problem.

  I hope you can help me and once again I apologize for my English.

  Hello

  I'll try to help you my friend.

  > When it is started is says "insert the disk in the drive system. Press any key when ready
  This message appeared on my laptop after the HARD disk is dead.
  I had to replace the HARD drive and reinstall the operating system.

  I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

  I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

  Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
  > How can I change my BIOS so that the HARD drive is recognized?
  The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
  But vary important is that you use a compatible HARD drive.

  > Can someone help me with the recovery CD?
  Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
  What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

  Greetings