Internet ip address is address internal modem

Similar Questions

• How Internet IP address with the Linksys BEFSX41 router pings?

  Hello.

  Does anyone know how to let my Internet IP address responding to pings from the outside with this model of router? I can't seem to find the option to set (the configurations of way more than my old Netgear RT311). I couldn't find it via Google search (all internal pings). I use the 1.52.15 firmware version.

  Thank you in advance.

  See the demo of the UI here. Change the option "Block anonymous Internet requests" for people with reduced mobility. Then the router will respond to the pings on the ip address. If this does not work once you change it, check that the BEF was really a public IP address on the internet port. Check the status page it shows what IP address the router uses on the internet port.

• I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an Internet service provider

  Hello

  I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an ISP, but to a mac. I want to transfer data via phone ports, have two computers without being connected to the outside world.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Satellite A30: Cannot detect internal modem

  I have a Toshiba Satellite A30. The internal modem was working fine until a few months ago, when I moved to town. Now my computer can not detect the modem at all. Please help me!

  Hello

  What you can see in the Device Manager? Is there a yellow exclamation?

  Alternatively, you can try to install the modem on this path:
  Control Panel > modems Options and > Modems. If there is no Modem didn't try to install by clicking on the Add button. Follow the instructions in the Add Hardware Wizard.

  If you can again see Modem, check all the settings in the properties of the modem (for example the adjustment wheel) and dialing rules. Is your well configured Dial-up connection (country, area code)?

  Remove the Internet connection and make it again with the Network Setup Wizard. It is very important.

  Good bye

• Internal modem in model Envy 23

  I want to send a fax from my HP Envy 23 t - have an internal modem, and if so, where is the connection and how do I connect to my phone?

  There is not an internal modem on this computer.  With the widespread availability of wireless and Wifi networks, it is very rare to find a new computer system that comes standard with a modem to the former for connection to a landline.  You can send faxes by internet and several free internet fax services are available to you as well as many others that offer subscription services.

• Satellite Pro A10 undetected internal modem

  I have a problem with my internal modem. I reinstalled the drivers, but it is still not listed in the modems. Does anyone have a suggestion?

  Hello

  Did you get the yellow exclamations points in Device Manager?
  How did you install the modem driver?

  If the driver has not been installed for the modem device should appears as an unknown device.
  Then you must choose this device, right click and install/update the driver.

• satellite A50 does not recognize internal modem

  Hello everyone,
  I bought my laptop 3 months ago and everything worked fine, but 2 weeks ago, I noticed that it no longer recognizes the internal modem (Error 797)
  I tried to uninstall in the menu modem/phone, but now I can't install it again... or using drivers on the cd of installation or of the ones I downloaded from this site.
  I have Windows XP home edition with sp2 and any other installed update... What can I do?
  Thank you very much
  Good bye
  -Cristina-

  Hello

  Please see this topic.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=2001&MessageID=5687#5687

  I hope it helps.

  Cristina if you sometimes have a problem, you can also check if there is a solution. Please use the advanced search and put term you want and you can find a lot of topics with similar theme.

  If you still have problems, please write again. It must be possible to solve your problem.

  Good bye

• Add the Internal Modem

  Hello, I have a HP P6774y computer, running Windows 7-64 bits and 32 bits (2 sheets)

  I want to use the fax software, but there is no internal modem.

  I have a 56K of my last computer modem card. The specifications for my p6774y indicate a free PCI, but either it is a new type of PCI or... I do not know.

  Any advice on how to install this PCI Modem card would be appreciated.

  If it is a new type of PCI on my motherboard, what do you suggest to me, I need to do a lot of fax and need the ability to access remotely.

  Thank you.

  Thank you... I understand that I have to get a new Modem card, one that corresponds to the PCI Express x 1 slot. The card I have is for the older PCI 16.

• Satellite 1800-400: internal modem does not work with Ubuntu Linux?

  Hello

  I try to get the internal modem on my departure from 1800-400 of Satellite under Ubuntu Edgy. All other works out of the box except the modem software and I was wondering if one can be able to help with this.

  I have been on many Linux forums and followed a number of tutorials, but none have worked for me so far.

  Toshiba seems to say it should work, but not enough for me detailed instructions are!
  http://newsletter.toshiba-tro.de/main/main/MachineInfoAus.php?OS=1&machine=119&devices=5&d_ty p = 208

  The modem manufacturer's site say it should work but still not enough instructions
  http://www.Modemsite.com/56k/lucentamr.asp

  And found some good info here...
  http://www.Heby.de/ltmodem

  But I'm still stuck not being not very irritable not! Any ideas would be greatly appreciated.

  See you soon

  Hello.

  It seems that this laptop uses a Modem Chip Askey (Lucent)
  I see only one way to use this modem in Linux.
  You must look for the modem a pilot who takes in charge this chip and is designed for the installation of Linux.

  It s very difficult to find the right driver for Linux because there are a lot of different Linux distributions and not all drivers will work.

• Impossible to install internal modem on my Satellite A80

  My Toshiba recovery cd is corrupted, so I got the latest version of XP on CD and loaded with a lot of success.

  However, the internal modem necessary to a driver who was on the restore cd but not on the new CD.
  I downloaded which, in my opinion, is for "Toshiba Satellite A80 internal modem" driver software and run it.

  She says that is install the driver but after about 3 minutes and 75% complete (based on the load bar), the process stops and the driver has not loaded probably as the internal modem says that he doesn't have a driver.

  Does anyone have ideas on this? It would be appreciated if I can get a solution.

  Hello

  You have downloaded the latest driver of modem on the official page of Toshiba?
  What Service Pack you have installed for XP? You must install the latest version of the version which is SP3 and you can download it on the page of Toshiba.

  Also, try to install the driver as an administrator.

• My computer says that it is connected to the internet but the HTTP 500 Internal server Err error rises. How I get working again?

  Why my internet has stopped working

  My computer says that it is connected to the internet but the HTTP 500 Internal server Err error rises. How I get working again? I have another computer in the House and that works very well.

  http://support.Microsoft.com/kb/321448

  http://support.Microsoft.com/kb/311766
  In some cases, you must remove the cookie as well.

• Discover Setup RSA for Internet users is NOT only internal users

  Discover Setup RSA for Internet users is NOT only internal users

  Yes, that might work very well.   No, the software of RSA information would not be repeated between brokers.

• Cisco E1000 does not connect to internet-do not get the Comcast modem DHCP ip address

  Very strange problem...

  I have Comcast HSI and use my E1000 Cisco (Linksys) for about 3 years now. Bought as a refurb.

  My problem is that the E1000 is NOT receiving DHCP of my modem Comast info.

  Internet works when my laptop is fixed directly to the modem; but when he connects to the internet port of the modem

  to the internet port of E1000 is NOT attract my IP from DHCP ISP so no client can broswe 'wired or wireless.

  I've even updated the firmware and starting to think its time to get a router 'NINE', as it is NOT LOGIC!

  I can't release/renew as I have NO ip address for free.  I tried to configure the E1000 as static

  using the ipconfig/all for when the laptop computer and the modem is connected. Comcast said they don't see anything on their end.

  I also have factory default router and Redid the config without result.

  Any help would be appreciated.

  You must activate the clone MAC address of the router to recognize the connection to your cable modem. The link below will tell you how to configure the router to work with a connection cable and how to clone MAC address.

  Setting up a Linksys router with cable Internet service

• Why must know the MAC address cable modem if I bought a new modem cable or ISP company.

  Original title: why the ISP or cable modem company need to know my cable modem MAC address if I bought a new one, beside that received from a modem cable or ISP company?

  Why the ISP or cable modem company need to know my modem cable MAC address if I bought a new one, beside that received from a modem cable or ISP company?

  The cable provides tend to lock their network by MAC address or they assign you an IP address based on your cable modem MAC address.

  Some (for example cable Telewest in the United Kingdom), used to go as far as locking down for the mac address of the PC connected to the cable modem, which is why some routers have the ability to clone the mac address of a connected device.

• How to point to the address internally by external IP address

  I don't know if it's the appropriate section, or how to look through the forums to see if this question has been answered before, but I really need help with this problem. Basically, I have a static public IP Group and I need one of them to point to the internal server IP address. This is for the RVS4000 router. If someone needs more information to help answer I can easily provide. Also, if someone has sources or topics on the forums I can verify for more information I would be very happy!

  Timothy,

  The RVS4000 does not support NAT 1 to 1. You will need a different router.

  RV120W

  RV220W

  RV042

  RV082

  RV016

  SA520

  SA520W

  SA540

  Everything supports the configuration that you are trying to accomplish.

  Hope this helps,

  Jasbryan