Internet while projecting WiDi?

Similar Questions

• I try to get an update of the software update, but he kept saying ' this phone (Iphone 5 s) is not onger connected to the internet while I am using internet.» Please help me understand why.

  I'm trying to get a software update IOS 9.3 as reminded me. He repeated that "impossible because you are no longer connected to the internet while I am on the internet. Please help me understand why. I did it many times, but it's really annoying

  The iOS 9.3 update was pulled for iPhone 5s and older iPhones because of activation problems. He will be unavailable for the next few days.

• Windows 8 apps not saying not connected to the internet, while the internet office is good

  Windows 8 apps has problems, not saying not connected to the internet, while the internet office is good. After months of research to fix, I conclude that windows 8 has been sold quickly for cash. The team microsoft will fix the problem on windows 8.1.  I hope someone out there give us a competitive software replacement.

  Hello

  Please, try the fix mentioned in this article and see if that helps:
  http://www.kapilarya.com/fix-modern-apps-in-Windows-8-unable-to-access-Internet
  Hope this helps, good luck :)

• Is there a firewall means a single VM away from the Internet while still giving access to the LAN?

  I'm trying to find a way, if possible, to partition a simple VM away from the WAN (Internet) while allowing access to a subnet of the class-C using VMWare Workstation and outside the computer virtual guest himself?

  Install a 2nd NETWORK card is not my preferred option.  Home & comments are windows.

  I am currently configuring the MS Loopback map with the host firewall rules, but can't seem to figure out the trick to get this installation work.

  If anyone has any suggestions?

  Thanks in advance...

  If you have administrator access to the router that provides your connection to the Internet, you could give a fixed IP address to the virtual machine and set a rule of access on the router to only allow access to IP addresses on the local subnet.

• Cannot access internet while connected to wifi (mini ipad)

  My ipad cannot access the internet (including safari and different applications) while connected to wifi.

  Please answer if you know what happened to my mini ipad.

• interruption to the Internet while playing the Pike MSN

  Often lately that my internet connection was interrupted while playing Spades msn. Is it possible that one of the players in the game is responsible for this?

  Sincerely, Erick

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  1. which version of the operating system is installed on the computer?

  2 is the issue limited to Spades to msn?
  3. don't you make changes on the computer before the show?

  You can reset Internet Explorer and check if you are able to play the game without any problems.

  How to reset Internet Explorer settings
  http://support.Microsoft.com/kb/923737

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  If the problem only occurs playing sting into the MSN game then I suggest you contact MSN support.

  http://zone.MSN.com/en/support/article/supporthubmultiplayer.htm

  See the article for more information:

  The problems of games online using Internet Explorer:
  http://support.Microsoft.com/kb/2528246

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with game of Spades to MSN, I'll be happy to help you. We, at tender Microsoft to excellence.

• Apple Ipod gen 4 to connect to the internet I have wide sky broadband

  I have the wide band sky want to connect a geberation Ipod 4-internet

  Very new D.Aston for my Ipod

  This has nothing to do with Microsoft.

  Ask the question in the Apple Forums:
  https://discussions.Apple.com/index.jspa

• Programs cannot connect to the internet, while IE8 and firefox work very well on the internet.

  I used google chrome as my default browser, but one day it stopped working, while firefox and IE always worked / work fine now.  When google chrome no longer works, all my programs stopped to connect to internet, like Skype, itunes, WMP, etc.  The itunes gives error me is "make sure that your network connection is active and try again.  When I download programs through to firefox or IE8, now my default, they download but used to install or connect to the internet (I tried to reinstall chrome after that deletion but it will not be completed).  I was certain this isn't the router or the Internet itself, my wireless works very well to navigate through the Internet and other computers on the network do not have this problem. problem when I connect to other wifi networks.  The help and support center will not be to the point after that I click on it.  I use windows xp sp3 home edition 2002.  I looked through the other threads to see if I can solve the problem, check the exceptions in the firewall, disabling firewalls and other security, running an antispyware/malware, someone suggested (super antispyware), lowered or disabled security settings, but all without success.  I don't know what to do at this point but to restart the system.  Please help, any suggestions?  Thanks in advance.

  Hi unlucky2013,

  Follow the steps from the link below: Windows XP Internet programs cannot connect to the Internet through the connection broadband:http://support.microsoft.com/kb/307164

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Block of Win 7 Internet while allowing a Linux VM to use the net

  Hi, is it possible?  I tried the opposite, LinuxMint boot, then a VM Win7, which works fine internet blocking from the Win VM Internet form, but work a bit slow Windows for my Image processing programs.

  Thus returned to a boot of Win 7 64 and ideally want to be able to use the Linux VM (9) to surf the net, while blocking the windows to be connected on.

  Thanks in advance, Ian in Oz.

  If the Virtual Machine is configured to use Bridged Networking, then you can stop the host itself to have an Internet/network connectivity by deselecting everything except VMware Bridge Protocol in the reception of the network adapter properties.  Or at least uncheck, Client of Microsoft Networks, file and print sharing for Microsoft Networks, Internet Protocol Version 6 (TCP/IPv6) and Internet Protocol Version 4 (TCP/IPv4).

  

• Bad old Firefox version 3.6 shows to the internet while using the last version 17

  I use Firefox latest version 17 but on the internet it tells me that I would use Firefox 3.6.
  My PC is an Intel Duo Core processor of 2007 on Windows XP Service Pack 3.
  How is this possible and how to solve this problem?

  Thank you

  Your user agent string has been altered in the past when you were using Firefox 3.6 and it has not been updated since. Try reading some sites say that Firefox is obsolete or incompatible, even if it's the latest version

• Vista has ceased to connect to Internet while XP works fine

  I was able to connect laptop computers XP and Vista desktop for a few years.  This week my Vista desktop becomes suddenly as a local connection to 'unidentified network' wireless so no Internet.  When I plugged the Vista desktop with a cable, that I could not he was looking for a username and password for the ISP to allow the connection.  Verizon technical support could not fix the problem - says no user name or password is required - with the lack of connectivity wired and wireless.  Is it just a Vista problem?  A recent update Windows change something that has caused this problem?  I noticed that this seems to be an unsolved problem here and on the Verizon forums.  It seems that this must be a Vista problem, due to the fact that XP has no problem connecting.  Thank you.

  Hi TinTheBear,

  Thank you for using answers Forum.

  In the future, I suggest starting your own thread about your question to get the right support.
  :]

  You can check for third-party wifi software that may have been installed with your network card.
  If it is running and you try to use Vista to control network and password/password encryption settings, they may sometimes conflict and causes this problem.

  Since your able to login in safe mode, I'm curious to know how you did the clean boot, you mentioned in your message.
  "Disable programs and services at startup"-copied from your post.

  Here is a method to try:

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. This article describes how to solve problems in Windows Vista by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual.

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  a. log in the computer using an account with administrator rights.

  b. click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  c. under the general tab, click Selective startup, and then clear the Load Startup items check box. (The box use the Boot file is not available.)

  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  e. click OK, and then click restart.

  Step 2: Enable half the services

  a. follow steps 1a and 1B to start the System Configuration utility.

  b. click on the Services tab and then click to select the hide all Microsoft services check box.

  c. Click to select half of the check boxes in the Service list.

  d. click OKand then click restart.

  Step 3: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the Service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the Service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services , and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.

  Step 4: Enable half of the startup items

  a. perform a clean boot by repeating step 1.

  b. click on the Startup tab and then click to select half of the check boxes in the startup item list.

  c. click OK, and then click restart.

  Step 5: Determine whether the problem returns

  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have originally selected in the startup item list.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are cleared in the startup item list. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be causing the problem, repeat step 1 and step 2 without selecting the hide all Microsoft services check box in each step.

  Step 6: Resolve the problem

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Step 7: Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press ENTER.

  Reduce this includes this imageIf you are prompted for an administrator password or for confirmation, type your password or click continue.

  On the general tab, click the Normal startup option, and then click OK.

  When you are prompted to restart the computer, click restart.

  Please let us know if that helps.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't connect wirelessly to the Internet, while other devices are able?

  I can't connect to the Internet with my laptop.  This began a few days ago.  But we can still connect to the Internet via a wireless router with other devices yet.    Page says "Internet explorer cannot display the web page. When I click on diagnose connection problems, he said that it is my router or modem.  But my other devices still work.  I try the other suggestions but they just get into a circle with no result.   Any suggestions?  Ideas with my veryyyyyyy limited knowledge of computers.

  I also had this problem, but my husband seems to have found the answer by searching other responses. The problem seems to be related to windows 8.1.

  If you go to control panel, network and internet, then network and sharing Center, click on your WiFi connection, and then select the power management options, you may find that the option to "allow the computer to turn off this device to save power" is checked.

  Uncheck this option seems to have solved my problem, because I had no problems since

• Setting up of Smartphones blackBerry Internet while abroad

  I am currently abroad in Austria and I'm trying to set up internet on my blackberry "BOLD". I already bought a SIM with Orange to and paid for an internet package. However, I still can't internet on my phone. Data services are on and the sim card is active. My phone is not locked. Anyone know what may be the problem?

  Thank you

  Hello and welcome to the community!

  So, by what you say, you intend to have full BIS via the Austrian carrier, then you must also be sure that your home carrier frees your BB PIN of their system of BIS. A BB PIN can exist in a single carrier system BIS at the same time... it is often automatic when you do as you have done, but sometimes not... then, contact your home provider to make sure that their BIS system has released your BB PIN.

  Good luck!

• Unable to browse the internet while connected to the VPN

  Hi all..

  It was working fine until yesterday morning... Since then, I am not able to browse the internet it I am connected to the VPN... I get a "Page cannot be displayed" error message... the second that I disconnect VPN, I am able to browse internet... I did not change/facilities to do... help please...

  Thank you...

  Check to see if you can ping by IP address (make sure that the DNS information are properly learnt). Also try setting MTU interface to 1300 in case there is a change within the network of your ISP. What is mode NAT or NAT device not compatible?

• Lose the internet while connected to the VPN

  I've seen quite a few threads of not being able to connect to internet when connected to the VPN. I tried to follow but have not be able to follow. I connect to the VPN via IE (that is connected by using Check Point). How can I go about it?

  That's the problem of split tunnel. In general, the VPN tunnel can be configured on the client side (as the native client VPN PPTP in Windows for example) or side Server (like OpenVPN for example) to force all traffic through the VPN tunnel or not. If all the traffic is forced through the VPN tunnel, which is what your description, internet access is controlled by the VPN server. It is a safety precaution to isolate the network side server from your local network.

  I would check with your network/VPN to help admins simply because may fall you on a server-side config that may or may not be changed according to their network security protocols.