Iomega usb 2.0 EGO unrecognized

Similar Questions

• IOMEGA 1 TB USB 2.0 EGO

  I have lost the power of this backup drive, IOMEGA 1 TB USB 2.0 eGO.

  I have a SEAGATE PSU rated at 2 amps but the IOMEGA is rated at 1.5 amps.

  Can the power of the amp SEAGATE 2.0 be used?

  If not, where can I get a replacement power supply for 1.5 amp for the IOMEGA?

  Hi OLDMAN1938,

  I would not recommend using a power supply which does not meet the specifications of the device from Iomega. Unfortunately, we do not have power supplies for sale. I recommend finding an electronics store that has a power supply according to the specifications of the eGo, or you can look online for a replacement power.

• USB to SATA bridge - unrecognized disc

  I have connected my old drive of 200 GB SATA Maxtor DiamondMax 10 USB 2.0 to SATA bridge as an external drive on my laptop. Windows7 acknowledge it in the hardware Manager but I have, they don't see it in Windows Explorer and I can't read data of the or format. Does anyone have a solution to this problem? 

  Go to disk management and assign a drive letter to the drive.

  You will have to perhaps to initialize and format. If you do, you will lose all data on the disk.

• Connection USB BB to DM unrecognized blackBerry Smartphones

  Recently reinstalled DM software on my Vista for my Curve 8310. In the past, when I connected via USB that recognized computer BB and the SM open automatically, but now instead, Windows opens a list of the optional downloading only programs. Once I open the DM it will sync. How can I recognize the connection to what it is and not just a USB cable from the computer. I tried to go to the folder Sound/Device, BB uninstalling and reinstalling, but that is not the case. Help!

  Hi and welcome to the Forums!

  It seems that the installation does not go perfectly. I would recommend a clean uninstall

  http://www.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB02206&SLIC...

  Followed by a new installation

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=BlackBerryDesktopSoftware&thread.ID=3...

• Cannot use Windows complete back up to save backup external 1 TB Iomega USB drive

  The backup starts and then fails with the error message Coulnot save a backup file (0x8078002A)

  Hey,.

  Startup Repair method listed below must repair the BONES for the factory files and does not disrupt your system already installed.
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
  I hope that was helpful. Thank you!

• Ports Satellite A135 - S2306 defective USB after the BIOS update.

  OK, I searched all over the internet and not found anyone else with this same problem, or anyone with a solution that worked for me.

  A few weeks ago, I had the common error of the BIOS reset itself and asking for a password at startup. I took my local Toshiba authorized repair center, and they have not taken care of him, no problem.

  Since the resume, however, all 4 of my USB ports have been going crazy. What happened in the following three steps (in order):
  -One of the ports does not work at all, won't provide any current or even recognize that nothing is connected.
  -The 3 remaining ports are now only recognized as USB 1.1 ports, not USB 2.0 as they were before.
  -Now, only a very small number of my devices is not at all, with three USB mouse and two unrecognized hard drives work (I get the error message "USB device not recognized" standard Windows when I connect them to one of the three ports).
  I am running Vista Home Basic (32 bit) with SP 2 and the new version of the BIOS is v1.60.

  Is this something people of repair caused when they have unlocked the BIOS and updated? Is this a problem with the new BIOS itself? Any help would be GREATLY appreciated! Let me know if I let him out any relevant information, I tried to be as complete as possible. Thank you!

  The old Duke

  Hello

  > What is the repair people caused when they have unlocked the BIOS and updated? Is this a problem with the new BIOS itself? Any help would be GREATLY appreciated! Let me know if I let him out any relevant information, I tried to be as complete as possible. Thank you!

  It is not easy to say. I think that would be best to ask guys why it happens or what they have done in the past.
  But have you set the default BIOS?
  Please do; access the BIOS (by pressing F2). Set it to default by pressing F9 (I guess) and save the changes. Restart the unit.
  Access the Device Manager, and then remove all hubs USB and commands from the list of devices. After that reboot the device again. Windows should recognize the devices deleted again.

• USB wouldn't Devie recognized

  I used my ipod and iphone on my computer very well, and now all of a sudden whenever I'm trying to plug one or the other in one of the front usb ports I get "Unrecognized USB device". Any suggestions? Using Windows Vista.

  Hello Harmoney65,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you get the "USB device not recognized" error on your computer running Windows Vista. I'm you provide a HP support document: Troubleshooting connections USB (Windows Vista), which has a section entitled 'USB device not detected by Windows' which will provide the necessary steps to resolve this error and let you go back to enjoy your computer.

  Please re-post if you need extra support. Thank you for bringing This problem on the HP Forums. Have a great day!

• How can I access my Iomega external hard drive? When I plug it in it shows under COMPUTER.

  How can I access my Iomega external hard drive?  When I plug it into my USB port it shows on your DESKTOP.  I try to back up files on my external hard drive, but I can't get even the external hard drive on my computer.  Thanks for help.

  Hi Larryxcvb,

  1. what happens when you try to access the driver? You receive messages or error codes?

  2. other USB devices (USB key, etc.) recognized and works very well without any problem?

  3 is not detected the external hard disk on other computers?

  You can check the following link and try to run the Fixit of material.

  Hardware devices not detected or does not

  You can also visit the following iomega support article and see if it helps.

  What should I do if my Iomega USB hard drive is not assigned a drive letter or is not detected in Windows 7, Vista or XP?

  Hope this information is useful.

• Cannot find X1DE - USB driver to floppy drive more

  I have a floppy over 7-in-1 card reader and when I try to install it on my new windows 7 laptop again me that he cannot find the USB X1DE driver - so do not work. What can I do?

  Take a look at this

  http://www.techgeekandmore.com/2009/12/11/hardware-getting-the-Iomega-USB-floppy-drive-to-work-with-Windows-Vista-and-Windows-7/

• Publish with the installation of the USB SFD 321U/HP floppy drive.

  Can someone help me: I have an old USB SFD 321U/HP floppy drive and would like to find a driver for my Windows 7 to this regulation.

  Install a NEC USB Floppy driver and it will work in Windows 7 64 bit. Worked for me.

  Details are here: http://www.techgeekandmore.com/2009/12/11/hardware-getting-the-iomega-usb-floppy-drive-to-work-with-windows-vista-and-windows-7/

• Satellite L350 - connection GPS Navigon 7071 premium car

  Satellite L350 - I can't get the GPS unit to be recognized when connected with the USB cable. Error - "unrecognized device" advice please?

  Manufacturers of portable don t provide support for the third party hardware or software and if there is a problem, please contact Navigon support.

  Can you please tell us if you have any problem with certain USB port in general?
  You can use this USB port to connect various external devices? The same problem again?

• The system image does not work on win7 Home Premium HP Pavilion Elite HPE 250f

  The system image (and Windows Backup with and without Image system options) just do not start with the same error message indicating insufficient space for "Volume Shadow copy".

  HD has about 100 MB for the operating system and other files more about 11 GB for HP Factory Image.  Trying to backup to an external drive, Iomega USB with 650 GB of capacity.  External hard drive now empty but has been used before.

  HP support has no answer!

  April 24, 2013

  Just thought I'd give you the answer to this old problem.

  Windows 7 (for earlier versions) work as described in the help of the screen except that the VSS mode

  must be turned on.  This allows Windows to actuall save parts of the operating system

  Although these parts are involved in the actual backup.

  Shame on the HP technical support for not knowing this.

  In addition, the original tech support suggestion was to call Microsoft.

  With a new HP PC you have no direct support from Microsoft (free).

  It took me a while to work with Paragon Backup (wonderful product) to realize that VSS

  must be enabled in the operating system for these virtual backup features to work.

  {Information}

• Why is my lack of training:, but the drive is listed in the devices/hardware Manager

  OS Windows XP Pro, two identical computers both with USB 2.0.  The Freecom 250 GB external hard drive USB comes and works ok on one but not on the second PC.  Its icon appear briefly in 'My computer', but disappeared when I tried to access.     The drive appears in "Device Manager" under "drives" like Samsung HM 250JI USB Device. "  He was also listed as a USB Mass Storage Device in 'Remove hardware safely' but no drive letter.

  I have re-formatted the USB key as a drive on the first computer, one also made by error-checking complete to include repair and defragmentation, whereupon I transferred the drive to the second computer, but without success.   Maybe I should give up just the drive because I have a very good IOMEGA USB drive.

  I would be grateful for any advice.

  Richard Steiert.

  Hi Richard,

  Try the following.

  Method 1: Run the Fixit tool in the following article.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  
  Method 2: update the computer with the latest chipset drivers and also any other device drivers. Log computer manufacturer site to do so.

• FLOPPY DRIVE.

  I have an iomega floppy drive. Basically, my computer (Windows 7) recognizes as X1DE-USB but says it needs a driver.  The device worked well a couple of years, but there has been some changes! Since then, it seems, the pilot was "lost".  I tried the manufacturer but no joy, any ideas please thanks?

  What: http://kentie.net/article/iomegausb/or even http://www.techgeekandmore.com/2009/12/11/hardware-getting-the-iomega-usb-floppy-drive-to-work-with-windows-vista-and-windows-7/ ?

• Problems with the help of Deskjet 3745 on home network 2-PC

  I have an old PC running Windows XP SP3 and a new one running Windows 7, but only one printer. The network that connects the PC is on an ADSL router with its own external Iomega network drive with a USB port.

  To make the printer can be used on two computers,

  1. I initially plugged on the Iomega USB port. But the port was effectively a 1-way connection, so I couldn't preview before printing to see which form/profile of the printer used. So I put discarded and...
  2. revenue to the printer connected to a PC all the time and share it on the network. But two different PCs drivers needed which would not talk among themselves, and the establishment would simply not work.
  3. Finally, I went back to the simple method of the printer on the USB port of any PC, sure I needed it for us. Worked well for a while until the WINDOWS 7
  • Print preview has begun showing empty images (but print correctly).
  • print-queue doesn't have to face the cancelled documents.

  I had help of Deskjet Support to address this issue, which even reinstall the drivers on two PCs - several times! But I'm still left unresolved 3 problems with Win 7 donations.

  Has anyone encountered a similar situation and found a satisfactory solution to work?

  Try the following: connect the printer to the XP computer and set the machine XP to share it on the network.  On the Windows 7 machine go devices and printers folder, add a printer, a local printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, and then click Windows Update, and then select (not Hewlett-Packard) HP Deskjet 3740 series (Bobo).