iOS 9.3.1 phone turns off, but still has charge

Similar Questions

• LaserJet Pro M251nw color 200: Wifi turned off but still broadcasting

  Hello

  First, forgive my English.

  I have a HP LaserJet Pro 200 M251nw color, it has a capacity of wifi. Because the printer is connected with a cable ethernet to my router, I don't think that he had to use the wifi built into the printer.

  Thing is, when if I disable the wifi of the printer, and even if I disable "wifi direct to print", I can still see the SSID of the printer on my devices House (200 HP-Print-a6-LaserJet color).

  I looked on the forum and I tried the 'factory reset' turn, unplug the printer and taken, wait 15 seconds... etc. It did not work. I also installed the latest firmware.

  Any help would be greatly appreciated! :-)

  Hello revlib,

  Welcome to the Forums of HP Support!

  Turn off the wireless directly on Color LaserJet Pro 200 M251nw should have disabled the SSID broadcast. Since the display before disabling has not resolved, try the built-in webserver (EWS).

  To access the built-in Web server, you will need to enter the IP address for the M251nw in the address bar of your web browser. The IP address may be collected by touching the Setup program () > reports > Network Summary.

  Once in the SAP, click on network > wireless direct configuration > select and apply.

  

  Let me know if this has help

• NFC is turned off, BUT still using battery

  Hello. I bought my Xperia double Z3 this new year. The battery performance was remarkable in the departure. He gave me at least 2.5 to 3 days on this time initial additional use when there is excitement on a new phone. Release minimal during the day before. And I've always used the pacifier.

  

  Now, I noticed a regular drain on my battery. Sometimes it stays on a certain level for a long time like 1-2 hours, but sometimes 2-3% of fall right before my eyes. After awakening in the Moringa, it fell 5 to 10 percent. When the screen is off, I noticed 2-3% usage. It is now giving me within 2 days and I don't think I use too much of the screen as I did before.

  I use constant services Wi - Fi and GSM (2G probably) in the mobile network settings. Mobile data connection, bluetooth, NFC etc. The main applications only installed Whatsapp, Skype, Viber, alarm Mimicker. I tried the endurance mode as well as with those applications in active standby mode, but rest of NFC.

  

  When I check in battery usage statistics, NFC service is over the top, even though I never use NFC and it still isn't.

  How can I get rid of this NFC? I don't think I'll ever use it. 3 or more days battery is much more preferable.

  

  Thank you.

  P.S I suspect that service NFC arrived here after that I tried 'Smart Backlight Control' in the display settings. It was very convenient, but I immediately turned it off because I noticed that NFC has been enabled by its own. (I disabled NFC too).

  There are a few gaps in your battery use chart. Those that are intended (ie you rebooted the phone manually) or not? If they are not your phone randomly restarts on its own.

  Regarding your problem with nfc, I would try to launch the phone in SafeMode for awhile and see if it happens. If this does not happen them it is an application that you have installed acting upward. If this happens, then you should try to repair the firmware using CDP, and if he continues to be, then you may have a hardware problem. Also test if nfc actually works in the diagnostic menu.

• Find my phone turned off and still can not activate for new user

  Hello

  I bought a 6 s 64 GB Iphone to a friend yesterday and immediately restored to use for my part, but now it asks me to enter the my friend apple ID to activate, even tought "find my phone" was not enabled on this device. The thing is that my friend can't access his account from apple, since he is unable to access his e-mail account so that he can not give me the papers.

  I'll double check the IMEI on this site https://www.icloud.com/activationlock/ and it tell me that activation lock is off and the unit is ready to be used by a new user.

  Can you help me with this? I can give you the IMEI of the device

  Did you reset all data and settings? (Reset) And could you give me more information about the popup? It asks for your Apple ID friends inside to find my iPhone, or is it a notification system?

• AutoFill is turned OFF, but still works as if it were 'ON '.

  I have a form created. When my technicians will put their responses in the form... .for example line one they answer 'yes'... line two 'yes'... .and when they reach the three line and lets say they answer 'yes' all other lines after this line auto-fill with the mention 'yes '. any change to line 3 follow the lines after. I see semi-automatic is OUT and I deleted all of the words in the entry list. I can do to prevent this auto fill?

  even if I type 'no' to the line 3... all of the below lines can say 'no '. Basically, all the lines below the copy of line 3 and automatically populate what is written on line 3. It can be edited, but is a pain for my technique. What is happening here

  use Adobe Acrobat Pro - I created part of it into forms of Adobe Central because I wasn't much choice given initially. He kept open any time, I was in acrobat and tried to create the shape.

  When you create a form field, you give it a domain name. If you open the field properties dialog box, it will be the first thing on the general tab. So what you need to do is to rename the fields to make them unique in the form. The fields that you copy & paste will have the same name, so if you copy & paste, you must rename the pasted copy.

• iMessage does not work for me. I have no text to send or receive texts as an alternative. I am able to use the Internet to navigate / social media but iMessage completely ceased to operate. I tried the usual phone turn off / on, reboot, etc.

  iMessage does not work for me. I have no text to send or receive texts as an alternative. I am able to use the Internet to navigate / social media but iMessage completely ceased to operate. I tried the usual phone turn off / on, reboot, etc. and still nothing. What can I do?

  What methods have tired to get it activated?

  You can disconnect from the iMessage

  Disconnect from the iCloud

  Reboot your phone

  Reconnect

  Wait iMessage activate

  Do you have a viable data plan?

• Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, only clean President, that done, but nothing works, i

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  Fanat_UKR wrote:

  Hello, I can't configure Siri, Siri is enabled and when, select 'Allow' Hey, Siri "" then is presented the installer A Siri cannot hear me, what should I do? Restart the phone, turn off the Siri allow, clean the speaker, all of this done, but nothing doesn't work, it doesn't work well as Siri does not hear me!

  your phone must be connected to a power source to use Hey siri since you have an iphone 5.  Most recent iphone don't need to be plugged into a power source.

• Xperia Z3 Compact - phone turns off on its own after lolipop update

  Team dear Sony,

  Reminder: My Xperia Z3 phone is 5 months old. It worked perfectly well until the update of Lolipop (updated 3-4 weeks).

  Question: Phone turns off suddenly on its own and is not put on until several attempts after pressing the power button.

  Few comments:

  1. no point it disables. During a call, while loading, while the navigation and so on.

  2. I tired of all the combinations of power of the device mentioned in different threads.

  3. I removed the SD CARD, SIM CARD. But in vain.

  4. as someone mentioned in one of the thread suspecting some sort of application creating the question, I did mode ultra endurance enabled to limit the minimum demands naked ot. But in vain.

  5. I did factory reset and update the phone. But in vain.

  All effrots are frutail.

  Can the team Sony or friends on this forum to support suggest me what to do?

  Thank you in advace,

  Gopi Krishna

  @GopiKrsna

  Try this.

  Remove the SD and SIM cards > fix the phone with PCC > make sure you delete all > when you repair the phone > trying to use the phone without SIM and SD card for an hour or two > report.

• Aspire power E1 light - 572P stays on when I stopped. Screen turns off, but the router is plugged

  When I quit my Aspire E1 - 572P the screen turns off but the blue light and the router remains connected.  Ethernet services and internet used to go off. Any suggestions please.

  Go to power options. On the left side, click on choose what the power button. Scroll down and uncheck quick start. Save changes and close.

• Defender is turned off, but does not give me access to it 2 turn on power

  original title: windows Defender

  These days have a lot of problems with my laptop.  Problems with starting.  I need to access windows defender to modify startup programs.  It is said that Defender is turned off, but does not give me access to it 2 turn it on.  In addition, different problems with different users and accounts by the office put in place, it looks like all my users are running different versions of windows, so I don't know where to start with all the problems.  Security sounded like a good place 2 start, so I guess I'll start by Defender problems.  (I have recently downloaded the free security essentials, safety signs so all green lights).

  Hello

  You might have developed some questions so I would make these your
  Admin account. These are in addition to checking your startup
  programs.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

• Hibernation problems - my computer turns off but it restarts immediately.

  I am running Windows Vista Home basic with Service Pack 2.

  Recently, I used a disc clean up program which seems to affect hibernation. My computer turns off but it restarts immediately. I went to the command prompt as administrator and checked what is available - S3 - and that you typed in "powercfg / hibernate on ' but it will not always 'down'." I cut and restarted, but still no improvement. Has anyone else had a similar problem? If so, how to solve it?

  I am running Windows Vista Home basic with Service Pack 2.

  Recently, I used a disc clean up program which seems to affect hibernation. My computer turns off but it restarts immediately. I went to the command prompt as administrator and checked what is available - S3 - and that you typed in "powercfg / hibernate on ' but it will not always 'down'." I cut and restarted, but still no improvement. Has anyone else had a similar problem? If so, how to solve it?

  Microsoft recommended a different command:

  http://support.Microsoft.com/kb/928897

  I used the disk cleanup tool in Windows Vista, and now the hybrid sleep feature and the hibernation feature are unavailable

  Click Start > programs > Accessories > right click on command prompt > run as Admin >powercfg-h on

  Alternatively, try the Fix - It.

  See you soon.

  Mick Murphy - Microsoft partner

• Laptop screen turns off but the system never sleeps when closed.

  Hello!

  I have a laptop Alienware M14x and quite frequently when I close my laptop, the screen turns off but the system will not. When I reopen it, the screen stays off and the system seems still to go but no matter what I press on, the screen does not turn. To fix it, I just turn it off power then back on the power button. I know that my laptop is still running because the fans are still running and the lights on the front and on the keyboard are lit. I don't know if this is a problem common or not, but it's really annoying.

  Any help would be greatly appreciated! If there are other details that might help, do not hesitate to ask!

  Thank you!

  -S.

  Firstly I find a windows command can tell you if you have something that prevents the mode 'sleep'. Run as administrator command window and use the command: powercfg-query.

  If you have my problem and SRVNET is active, you will see this:

  SYSTEM:
  [DRIVER] \FileSystem\srvnet
  An active remote client recently sent requests for this machine.

  2. to add SRVNET to the exempt list, do the following at the command prompt (EXACTLY as shown below.)  DRIVER MUST be written in capital letters):

  powercfg - requestsoverride DRIVER '\FileSystem\srvnet' system Awaymode

  and for good measure (not sure if necessary but I did anyway)...
  
  powercfg - requestsoverride DRIVER "srvnet' system Awaymode

  3. once all is said and done, it should look like this after you run:

  powercfg - requestsoverride

  [DRIVER]
  \FileSystem\srvnet SYSTEM AWAYMODE
  srvnet SYSTEM AWAYMODE

  4 enjoy again the "sleep mode".

  Credit is to JohnnyN to http://yabb.jriver.com/interact/index.php?topic=79201.0

   

• computer won't goto sleep IE screen turns off but the hard drives will not be

  No matter what I put in power options, the computer won't go to sleep.

  The monitor turns off but the hard drives, fan to continue working.

  I can't force the drives to put beyond the control of the characteristics to uncheck in the power options.

  The computer turns off when the power off but sleep option does not work.

  Thanks for any help.

  Hello

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the question and your efforts to resolve.

  This problem may be due to the following reasons:

  -The drivers are not updated.
  -Power option settings are incorrect.
  -The devices connected to the computer are preventing it from going into standby mode.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control.
  Reference:
  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  Windows 7 is not going to sleep
  https://Support2.Microsoft.com/kb/976877

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Sony Xperia z3 Turned off and will not charge after being immersed for about 5 minutes

  As the subject says. My Xperia Z3 was submerged for about 5 minutes in less than a foot of water. He was in charge at first, then it started to vibrate. The model will thus: 1 (typical to indicate the load power) Vibration, then a Triple vibrator. At this point the LED on the phone turns off. Now he's going to restart this process again and again until the phone is disconnected. That submerged while the phone components were closed and did not open. As far as the damage is concerned, it is a crack in the root of the hair in the backglass and part of the bezel has started to peel off near the camera for unknown reasons. Once again this damage is very slight, and only someone who knows what the phone looks like new would see same. Any help would be apperciated.

  I'm sorry to see it, but you will need to contact your local care Xperia

  http://support.sonymobile.com/global-en/contactus/

  Request a trial of vacuum.

  The crack may be the cause of the water damage.

• CS6 has stopped working when I try to print. I reinstalled CS6 but still has the same problim

  CS6 has stopped working when I try to print. I reinstalled CS6 but still has the same problem. He seams to have started when I downloaded the ICC profile

  reset your preferences-

  Acrobat: https://forums.adobe.com/thread/1595848?start=0&tstart=0

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  hearing: https://forums.adobe.com/thread/1079494

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InCopy: https://forums.adobe.com/thread/526990

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

  If that fails, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall