IP_MESSAGE_PARAMETER for entrants

Similar Questions

• Cannot create e800 19.ne Activesync for Vista

  Hi all!

  I have a problem: when I search my pc (no computer toshiba laptop but with toshiba BT) I found only the MOULD as the available record. In the Panel of bluetooth settings of vista I have 2 coms configured (one for the outgoing and one for entrants), but I can't find them on my e800. So I can't create a connection between the two Bluetooth activesync.

  Any ideas?

  Thank you for your help.
  Fabio

  Hello Fabio

  Just a question: Activesync is compatible with Vista?

• Entrants TA1 - impossible to find agreement.

  Hi all

  I have a question using incoming TA1 with no agreement found error files. Although I created TA1 def with Document Versrion 5010X220A1, but still, why does she seeks the error 5010, below I have no clue.

  I know for entrants to work without problems, we need to ensure that 4 party settings, in part, document type and document protocol version, but how do for a TA1?

  I gave the TA1 file name with the Type of Document and the Version of the Protocol as (XXX_XXX_TA1_5010X220A1.dat).

  Agreement partners: FromTP XXX, ToTP XXXX (TP changed names) with the type of paper TA1-5010-ENTRANTS.

  
  

  
  

  Please advise...
  

  Finally! I am able to solve the problem! Thus, according to my understanding of the TA1 produced and consumed are based on version 5010 only. Created new definition for TA1 under version 5010 and new series of agreements, which solved my problem.

• Why do we need to double enter our password by e-mail?

  TO THE ADMIN, PLS ADDRESS THIS IPHONE + IPAD

  Is it just me or someone else has noticed that when you change your password of e-mail on an iphone (I have an iphone6 +) or an ipad (I have a mini ipad3), you must update in two places?

  > > SETTINGS > > MAIL, CONTACTS, CALENDARS > > ACCOUNT > >SERVER of MAIL ENTERING> > PASSWORD

  AND

  > > SETTINGS > > MAIL, CONTACTS, CALENDARS > > ACCOUNT > >SERVER of OUTGOING MAIL> > SMTP > > SERVER PRINCIPAL > >SERVER of OUTGOING MAIL> > PASSWORD

  This might be different by user according to this email account you hace (outlook, gmail, yahoo, aol, mail.com, etc.)

  In my example I happen to use an e-mail account.

  So, if this "bug" is, why Apple not default settings so that you just need to update once in a single field, which then applies to OUTGOING and INCOMING MAIL SERVERS? Or have a checkbox indicating "Please apply password for entrants and mail servers outgoing" which is checked by default. If some people (which I think would be a very small minority) need configure different passwords for each, they should still be able to do so as the two fields are available at the entrance.

  As said, it's different servers, the incoming (pop3) and the outgoing (smtp) server that may have different passwords. It's also in the mail from MAC, there are two fields for pop accounts

• E-mail went nuts

  E-mail no longer works.  Keeps telling me the username or password is incorrect.  NO it'S NOT. I tried 15 times checked and double-checked.  I even tried the deletion of the account and starting over.  NO JOY.

  PS I still hate your so-called support site.  When I have a question, I want it answered.  I do NOT wish to be given 15000 answers and I have to figure which is correct.  Or I wish to be sent to a FORUM.  It would be nice to have someone there to answer the question.

  OTHER SITES DO.

  A Google search produces many hits that sound similar to your question.

  The theory is that it is a matter of Android vs AOL.  Try this suggestion:

  (1) delete your AOL email on your tablet account.

  (2) add a new email account using the "Manual Setup" button after entering your e-mail address and the password.

  (3) use imap.aim.com for entrants adjustment and smtp.aim.com for the parameter out. It is not "Instant Messaging" but which is necessary for AOL mail now. Of course, your e-mail address and password remain the same.

  WyreNut

• How can I increase the font size in an e-mail message in Windows Mail

  HI, I would like to ask a question please.  I was wondering if someone could tell me if there is a way to enlarge the font in an email so that I can see the words in the e-mail message and also if the person who receives the e-mail message can also see much easier email phrases.

  Thank you very much for your time

  Windows Mail

  Windows Vista Home Basic Edition

  32-bit operating system

  Moved from Vista programs Forum.

  To send: tools | Options | Dial. Set the font size there.
   
  For entrants: reviews | Text size. Select larger.
   
  In addition, you can hold down the Ctrl key and rotate the mouse wheel to resize the text.
   

• The ASA IPS configuration

  Hello

  I have a question about the steps for using on IPS on ASA - all using a NAT addresses or configuration of access list for interesting traffic, that I have to use really. Specifically, NAT and the list of access or access and NAT?

  Keep the ACL extended near the source and the REAL IP address. NAT occurs within the ASA, then you're dealing with external systems.

  If you have 6 or 14 addresses external, public IP by your ISP, you can NAT... otherwise, you're stuck with PAT.

  For entrants to the outside: use the real, REAL public IP addresses have been assigned by your service provider in order to allow certain incoming traffic. It could be access list 100 or a list named more extensive access, such as 'inbound-outside '.

  For entrants inside the interface: use internal IP address private plan [192.168.x.x, 172.16.x.x - 172.31.255, 10.0.0.0] with appropriate subnet mask to allow traffic from the inside to the outside for your users. Most of the people open the "permit ip any any" here, but I prefer to limit the internal address, specific private only. It could be access list 102 or a named example lsit access 'inbound_inside '.

  Traffic, which is not "allowed" will be implicitly denied.

• RV042 load balancing problem

  We have two network connections coming into the office. One is a private Wan, and the other is a WAN on the internet. We have a RV042 router configured for load balancing. We have our private WAN which includes Exchange and 6 VPN Wan1. On WAN2, we have a public IP address and home workers. Both connections are 5 Mg T1s and both have the ability to access the internet but only wan2 has a public IP (76.x.x.x) were as WAN1 has a private IP address. (10.x.x.x).

  Were now the problem lies is our new website based on payroll, system does not support load balancing. We have on one hand stop when we do pay (Tower load balancing off.)

  Now is it possible to use our computers to pay only one side? change the host file maybe? Or force a certain MAC address of use only the WAN1 or is there a better router to achieve?

  Any help would be appreciated

  Peter Labelle

  I don't have a RV042 and have had reference to the Administrator's guide:

  http://www.Cisco.com/en/us/docs/routers/CSBR/RV042/Admin/Guide/RV042_V10_UG_C-Web.PDF

  I hope these comments are useful. Perhaps you can comment and let me know if it works for you. Check balancing load and the binding protocol section.  These changes are disruptive... Please assume a failure during the change.  Not a long interruption, but the sessions at the same distance could be lowered.

  Out, you can use the protocol binding. This could cause some problems with the VPN client... you can try this after hours?

  For entrants, how customers and remote computers know the accounting software?  You are advertising this IP address via a link or another?

  If you are, then you can have a preference through one of the links.  If you advertise this IP address then you will not be able to provide a preference to a supplier of services on the other.

  Do please see the Administrator's guide and let me know your thoughts.  Sincere greetings and HTH,

  Andrew Lissitz

• Question about components entering the SIP/h.323 and SRV

  We have our VCS - E put in place for entrants and outbout call to the internet.  We have an SRV record for SIP and H323 audience.

  The SRV record lists the SIP/h.323 services for ourdomain.com, redirecting to video.ourdomain.com.

  I have some problems however;

  When testing with a client of Polycom that does not work with SRV or that has a different implementation of it, we have to deal (alias) @video.ourdomain.com.

  When you use Cisco Jabber (free), it only works when you dial (alias) @ourdomain.com but don't touch our VCS-E at all when you dial (alias) @video.ourdomain.com.  We can compose (alias) @our-public-IP of Jabber OK.

  Cisco Jabber doesn't use regularly debriefed if SRV is not available?

  Optimally all would support SRV, I have to accept that some people that we connect will not support it and I would like to be able to give the same dial in URI to everyone.

  Do I need to register an SRV record for video.ourdomain.com (I don't know yet if we record SRV for subdomains)? Or if I want the same dial in details any material they use, I have to give @public-IP (aka)?

  Cisco 'free version' never took in charge a record search as far as I know.

  The only reason for which you can use on the version "on-prem" is because the VCS-E can be configured to do this, not the customer.

  To ignore completely the DNS and the support of all comers, you will indeed give [email protected] / * /-E_IP_address, that said, as far as H.323 goes you will get a few old systems or systems with the old firmware, Polycom Polycom and LifeSize that only support ip_address ##Alias - so a transformation should be put in place to allow these establishments.

  And Yes, you can configure an SRV for subdomains.

  /Jens

• COM 3 is is not available

  I'm at my wits end! I have an E2 which was beautifully HotSync over bluetooth with my HP Vista SP1 desktop running. The HP locked up for printing, which is never done and I had to reboot. Now, my Hotsync does not work.

  The E2 appears "unable to launch Polish HotSync because port is used by another application.

  HotSync on the HP settings it tell me ' the selected com port, com 3 is not available... ". ».

  Bluetooth settings show my camera and when I click on the Services tab in the properties 'Object PUsh (Obex)' is the only thing listed and it is checked. What is c? Also by clicking Services establishes a connection with my E2. ("current connection"). I have not changed the bluetooth settings (all the options are checked). On the COM port tab, there is a list for entrants, but no number of port next to him.

  I don't know what to do. Help, please.

  Clare

  Add a new port to incoming bluetooth com tab and reconfigure the bluetooth partnership.

  Message relates to: None

• read 11.1.1.5 mutiple directories

  Hello

  I have the same problem, such as discussed in this thread

  SOA 11 g File adapter write several files

  that is not answered.

  The requirement is to write the file to multiple locations using the file adapter.

  Reading files works very well with the property < property name = "DirectorySeparator" value = "," / > setting in the file reading jca, but writing is a failure. Write file adapter starts after the same exception if the parameter above is defined in the jca write file. I would appreaciate if someone can shed some light here and help me understand the ideas.

  In the jca file that I

  	< property name = "DirectorySeparator" value = "," / >
  	< property name = "PhysicalDirectory" value = "C:\result,C:\source" / >-->

  October 9, 2013 12:13:27 AMerror in the operation 1 channel 'write' on the service call target 'WriteApprovalResults'

  
  

  ... SetDirectorySeparator property is not set to oracle.tip.adapter.file.outbound.FileInteractionSpec please check the spelling of the property.

  What Miss me?

  Thank you

  Hello

  Multiple directories is supported only for entrants (when you read a file)...

  http://docs.Oracle.com/CD/E28280_01/integration.1111/e10231/adptr_file.htm#BABBABIC

  You can call the same card to write twice or several times, simply change the jca.file.Directory property...

  See you soon,.

  Vlad

• Generation of sample data edifacts.

  Hello
  
  My requirement is like that I need to read the folder EDIFACT document and convert it to XML and put it in the other folder using the Protocol Generic file 1.0.
  I used the B2b technical editor to generate the .ecs and xsd files using the model EDIAFCT D98A good command.
  I also generated the corresponding .dat file usiing the respective .ecs and .xsd files. Now when I open this .dat file it shows only the gross structure of EDIFACT, but how can insert sender, the identification of the receiver, the data (payload) in the .dat file using spec writer.
  While when I place the .dat file in the folder reference in the channel listens to read the file and convert it to xml as I marked the option translate into agreement.
  How should I enter my data in EDIFACT format to test my usecase.
  
  Kind regards
  Nishant

  You may see in ecs who where in the dat file is referring to what data and therefore you can enter data. Another way, first configure B2B for outgoing and pass XML. It will generate a native EDI file that you can modify and use for entrants.

  Kind regards
  Anuj

• FTP archives

  Hi all
  
  B2B is pick up the files in the FTP folder and successfully to IP_IN_QUEUE treatment. is it possible to check the FTP source files?
  
  EX: B2B is currently picking infile, it must check the files in /archive. Is it possible in B2B, if so... Please help me solve this problem?
  
  When you configure the server of Transaport of distance trading partner, we have a parameter called Archive direcetory, I gave a path of the directory to archive, its still does not.
  
  Concerning
  REDA

  Hi reda,.

  B2B is collection of FTP folder (i.e. it is incoming B2B, he put the files in IP_IN_QUEUE), then I need to configure it in remote partner (transport server) or hosting partner (Transport server).

  For entrants, you must configure the host TP delivery channel.

  Currently we are collecting the edi FTP transactions. B2B reports it showing the status of waitFA, can B2B generate 997 to FTP?

  Yes, it can. Be sure to choose DC right when adding 997 in the agreement.

  Kind regards
  Anuj

• can't publish in FMS 3.5

  Hello world
  I use FMS a long time ago and I did a lot of work with it. My problem now, when I started in my new project I could not able to hear the stream, the stream is not registered on the server at all the... I just got an flv file with the name of the stream and its size than a few bytes
  ActionScript 3.0:
  ------------------------------
  var stream: NetStream = new NetStream (connection);
  stream.attachAudio (Microphone.getMicrophone ());
  Stream.Publish ("flash_stream", "record");
  -----------------------------------------
  of course, I have an open connection to the server :)
  
  FMS application code:
  ---------------------------------
  application.onConnect = function (client) {}
  application.acceptConnection (client);
  }
  -----------------------------
  so simple :)
  
  Reception of ActionScript 3.0 flash (the movie who get the stream):
  -----------------------------------------------------------------
  var stream: NetStream = new NetStream (connection);
  Stream.client = new CustomClient();
  videoObject.attachNetStream (stream);
  Stream.Play ("flash_stream");
  ---------------------------------------------
  
  Please everyone... it is very important... I don't know why it does not work now :(
  
  I have an old application and unfortunately it works fine on the same server.
  
  
  My FMS version is 3.5 Interactive Developer edition
  
  
  This code won't work in Flex or Flash :(
  
  
  The server installed on Wondows 2003 Server

  You must use unique NetStream objects for entrants (publication) and outflows (reading). Check out this example in the docs:

  6e-7ff0.html#WSF833CFB5-21FC-412b-B2BB-8946DE3FC189 http://help.Adobe.com/en_US/FlashMediaServer/3.5_Deving/WS5b3ccc516d4fbf351e63e3d11a0773d5

  Jody

• Error send mail with gmail for IMAP

  I can't send a message. I use the IMAP protocol with gmail.
  I still see the error message when I send the message to someone.
  Gmail
  Shtorm
  14.0.13.104 Professional Avira Security 07.09.2015
  Core 8.03.34.88 02.12.2015
  (VDF) 8.12.35.14 08.12.2015
  Luke Filewalker 14.00.13.104 20.10.2015
  Time protection real 14.00.13.103 20.10.2015
  Filtr 15.00.13.163 20.10.2015
  Protection 14.00.13.103 e-mail 20.10.2015
  Protection 14.00.13.103 website 20.10.2015
  Firewall 14.00.13.103 20.10.2015
  Rootkits, Protection 15.00.12.380 01.09.2015
  The local decision-maker 14.00.13.103 20.10.2015
  Windows 7
  Thunderbird 38.4.0

  account3:
  ENTRANTS: account3, (imap) imap.gmail.com:993, SSL, OAuth2
  OUTBOUND: smtp.gmail.com:587, plain, passwordCleartext, true

  Entrants seems good.
  For the server outgoing SMTP/change the port, the security of the connection and authentication method, so that the result will look like this:
  OUTBOUND: smtp.gmail.com:465, SSL/TLS, OAuth2,