iPhone activation problem 5 after the factory reset

Similar Questions

• Why my iphone 6 more stuck with the apple logo and the black screen after the factory reset?

  I'm selling my iphone 6 Plus I did a factory reset, but it has stuck on a black screen with the white apple journal for more than an hour, why what is happening?

  Force the restart: press the lock and home buttons until the Apple logo appears again.

• ReadyNAS Pro 2 - Can't access after the factory reset/install

  Hey all,.

  Have a Pro 2, which responds more recently. I can factory reset it and start the installation process in RAIDar. But when he sets up the discs that it disappears in RAIDar and I can't access the web interface (responds to the pings, however).

  Problem of firmware or RAM?

  You came across a problem that we see in some cases, when do a factory reset. It should now be fixed.

• 55XD8505 it recharges continuously--cannot reach the factory reset

  Hello

  My 55XD8505 2016 is having issues. When you enter the home menu is extremely slow and leave then it is only a matter of minutes before the device reboots. If I just start the TV and stay away from the home menu, I can watch TV.

  Now, my intention is to restore the factory settings to try to get the system going again. Normally a reset of the Android system can be done either

  (1) via the settings menu

  or

  (2) by switch on the unit with the volume on/off button + start button / stop key and use recovery menu.

  I can't do 1) since any speed, I navigate the menu of settings, the TV restarts before I can fill a selection of factory settings.

  I can't do 2) either - at least all the possible combinations of Sony, I found does not apply for my TV

  I'm all of ideas - is it possible to factory reset via the USB port (perhaps using ADB)?

  A nailed!

  I discovered that you can use 'top' under adb shell. I did the following:

  (1) connect adb

  (2) adb shell

  (3) top m 5 (this lists the first 5 cpu by using the applications)

  After running high and enter the main menu, I saw the CPU use climbing, and the app in the foreground was always/system/bin/mtkbt, which I figured well be related to Bluetooth. So, after a few attempts of menu navigation speed, I managed to enter the bluetooth menu and disable bluetooth before it restarts.

  Success! Now I can navigate the menu of home once again, I have the tried clear the data cache / anything related to bluetooth from the menu applications and then reactivate bluetooth, but alas the problem returns. So now I'm running the TV without bluetooth. I could try to factory reset the TV tomorrow to see if it helps - at least now I can actually reach the factory reset menu.

  UPDATE:

  Now after you turn off the bluetooth, I could navigate the menu to factory reset. After doing a reset complete, it seems that everything is back to normal - even with bluetooth enabled. Problem solved... Thanks adb.

• Help! Aspire 5735 laptop with broken screen does not recognize external monitor after the factory restore

  I have an ACER Aspire 5735, running horrible Vista that never worked from the beginning, always locked up, media player never worked, on, on, and after about a year my dog took in the power cord and threw out of the table and the broken screen. I used it with an external monitor for a while, but it was even worse after that and after that he take to get fixed yet has proceeded to run super slow, always locked up, refused to stop or start upward normally, and so he sat in a closet for about 3 years.

  I took it out a week ago to see if I could at least use it for my kids to friends to play on, but that she still had so many questions, I decided to do a factory restore. And of course the recovery disks that I did when I got it do not work and are not yet recognized by the computer. So I went online and has used a method that I found there by rebooting and hitting the keys ALT F10 until I was at the factory reset option. It worked GREAT! Except once the computer has restarted and opened up to windows deleted monitor and I can't do anything with the computer because apparently it does not recognize that it is hooked to an external monitor on the restore to factory settings! Help!

  She does not recognize the monitor as it has been restarted and was even the windows start the display of the icon, but as soon as it loads the screen becomes black with just the graphics "monitor is on but not connected to what either" floating around.

  Is it possible to access something in the BACK or other so he could recognize the external monitor?  What is finally toast?

  Connect the external monitor to the laptop.

  Hold down the FN key and press the F4 key. Check if you get a display on the external monitor.

• Asus Vivo tab RT hardware keyboard stopped working after the default reset and updates.

  Separated from this thread.

  My Asus Vivo tab RT after the default reset and updates my physical keyboard has stopped working.

  but I can use the mouse by using the touchpad the touchpad works a few keys on the keyboard as...

  music, fn, FN + brightness work. but the letter keys are not. When I am pressing on the keys, they make sounds, but does not...!

  Hi Srikanth,

  I understand that you can not use the alphabetic keys on your tablet.

  To better understand the issue, please send us the following information:

  1. You are able to use the external keyboard with the laptop?

  2. Is this problem specific to certain keys or all alphabetic keys have similar problem?

  This problem could occur if the filter key is enabled, please disable filter keys and see if the problem is fix.

  Follow these steps to disable the filter key

  1. Press the Windows key + R.
  2. Type of control
  3. Click ease of access.
  4. Click on change your keyboard works.
  5. Uncheck the box that says Activate FilterKeys.
  6. Click Ok.

  You can also see the following article for some common troubleshooting steps that can be performed on Windows 8.

  http://www.Microsoft.com/hardware/en-IE/help/Windows-8/troubleshooting/keyboard/using-keys

  Hope this helps, get back to us if you need further assistance for Windows.

• Is it possible to recover data after the factory restore?

  Hi, I have laptop G62-340US and I use windows 7 64-bit. I am having trouble with streaming online videos, and whenever I start my computer, it shows a kind of errors, so I thought to restore my computer to factory setting. But I have some data inportant on my computer. I've been me request so if it is possible to recover data after the factory restore or I do something that restor factory will not delete my data?

  Hello

  You will need to back up all your personal files, etc. before executing a factory reset - an option to do this is to use the facilities available in Windows 7, as described in the guide on the link below.

  http://www.howtogeek.com/HOWTO/1838/using-backup-and-restore-in-Windows-7/

  Kind regards

  DP - K

• Using XP Professional... problems caused after the download of Service Pack 3

  Using XP Professional... problems caused after the download of Service Pack 3

  Using XP Professional... problems caused after the download of Service Pack 3

  Only these security updates are not downloaded successfully:

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2742596)
  Security Update for Microsoft .NET Framework 3.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2756918)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2789643)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2804577)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2833940)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2844285)

  Microsoft Fix - It ran... computer & rebooted... closed repeatedly...

  Problem persists... Help!

  Lane

  It is a common problem with updates of .NET. Here are the steps I follow

  First try this...

  Download and run the Microsoft .NET Framework repair tool , then visit Windows Update and let it try to reinstall updates. Once it's done, scan again with Windows Update to ensure that they properly installed.

  If the above does not make it...

  Open Add or remove programs, click on .NET 3.5 and choose repair. I got around to test if this fix actually .NET 2.0 and 3.0 of the .NET also, but it's worth it. I do not know if it can also cancel updates already installed .NET. If so, they will reinstall when you perform a Windows update that is the next step after the repair.

  If the repair does not fix it, will add and remove programs and uninstall the .NET Framework 3.5, 2.0, then 3.0.
  Visit Windows Update, select Custom scan and under software, optional install this...

  

  It must be installed by itself. Windows Update will not let you do otherwise.

  When he did install (I forgot if she asks for a restart or what not), scan again and all updates for .NET 2.0, 3.0 and 3.5 of the .NET .NET must appear. Choose to install.
  A new analysis to ensure that they properly installed.

  If all goes well, that will solve the problems you face.

  Make sure you come back and let us know which method worked for you or if you still have problems, I have to run a cleaning tool.

  Good luck!

• Error code: 80070490, when you try to do the factory reset.

  Hi, my laptop is Dell Inspiron 15R SE and my window always freeze once I started my pc for a few minutes... the Task Manager and the window are freezing and he wouldn't recover more, I have to shut down the pc by now the power button as restart or shut down takes forever to fill.

  I did test of ePSA, and my pc is all green (extended test since)

  I don't know what to do so I decided just to do a factory reset for pc.

  But what happens is the window give me the error code: 80070490. And it does not allow me to do the factory reset.

  Annex: this image is the result of using my Dell system health check.  (Mcafee is always automatically disabled)

  

  And another is BlueScreen Troubleshooter

  

  
  

• What is the problem with my iphone? He says still no service but my sim card works with other phones, after a reboot it says searching until I have to remove and reinsert the sim ive done all what is the factory reset to open the phone to verify any damag

  IPhone 6 64 gb

  iOS 9.2.1

  The phone says no service but the SIM card works, everything in the phone works except the flash still lights up and flickers sometimes before becoming stable but who don't mind not 'that' much, ive tried factory reset and everything, ive also open the unit and looked for signs of damage, the phone knows there is a SIM card in the phone , but he never says the name of the carrier, also after the restart he said looking and does not stop until I have remove and reinsert the SIM card.

  You can restore the factory state after an iTunes backup

  If this does not resolve the problem then you may want to align on Apple or an approved repair shop

• icloud in the iPhone activation problem 6 more

  IM someone buy iphone 6plus they don't sign Apple ID and icloud, I reset my phone and now I'm still icloud activation problem.how can I do?

  You can not. The only way is if the previous owner release form their iCloud account. If they will not do for you, it means nothing to you.

• iPhone: what can I save the deadly reset?

  Then, like many before me, I don't remember password encryption from my iPhone, or I remember ever put a. So I decided to start using iCloud backup instead. I like iCloud backup and everything, but I really want to be able to backup my iPhone on my computer and have this backup set at my disposal when I need it. I know that the only way to remove the encryption "tick" is to reset my phone.

  So I would like to know what kind of things can I have on my phone after a reset. For example, applications that I downloaded on my phone, I have to buy them again, or they are saved somewhere? And what about the data of games and apps, will they be saved in the centre of game or something? Also, is there a way to retrieve texts on my phone by a 3rd party app (of suggestions for this one)?

  I'm not worried about the notes, memos or photos cause all that I already put it on my computer, but what are other things that I can save the fatal reset?

  Thank you!

  Before you try this workaround - a little work but likely to solve your problem with nothing lost.

  To circumvent the problem of encrypted backups always being encryption:

  Backup to iCloud. Then erase the phone. Then backup to iTunes as a non encrypted backup. Then restore the backup to iCloud. Then backup iTunes again.

  From: https://discussions.apple.com/message/30209896?tstart=0#30209896

• I have an iphone 6 times and after the installation of new iOS 9.3 when I receive or make a call the person on the other end cannot hear me but I can hear them.  If I change speaker and then they are able to hear me.  Any help?

  I have an iPhone 6 plus and have upgraded to the new iOS 9.3 but now when you receive or calls the other person on the other end can't hear me. The only way to make this work is to allow the speaker.

  I power off, the hard reset, and this problem still exists.

  Can anyone help?

  Test your low microphone by going on record and taking a test recording.

  (When you put it on the loudspeaker, he uses the microphone before located next to the cylinder head box.)

• iPhone 5 slow work after the last update

  My iPhone 5 works much more slowly after the last update (iOS 9.2.1).

  Increased delay time after pressing an application, multitasking is too slow.

  Applications like Facebook pull a little longer to open now.

  The 'Phone' application is slow processing, including a shift before recent update.

  Autonomy is greatly reduced and wears out quickly on 3G or wifi.

  I would ask if it is the same with each i5 user, making it a common problem or is it just with my camera?

  Also if there is a solution to this problem...?

  You must wait for the next update for iOS

• 2540 HP all-in-one printer print by wifi only works after the router reset every time

  Hi, I recently bought a HP2540 all-in-one printer.

  I was unable to get the printer to work via wifi after trying lots of different things, but after rebooting the router and try again, it worked perfectly.

  However, it seems that whenever I'm away from the computer (or turn printer work) it will not print. However, as soon as I restart the router again it works perfectly. I guess it's something to do with the IP reset maybe, but would be unsure how to proceed?

  Thank you

  Bret

  Hey @BrentBWood,

  Thank you for contacting HP Support of Forums!

  I understand you're having intermittent problems of wireless communication with your HP all-in-one Deskjet 2540. I want to help you resolve this issue today!
  
  Because the problem seems to be fixed after you powercycle router it certainly seems to be a problem of ports with the router itself. This does not indicate that something is not actually with the router. It simply means that the router is doing its job too well and block the printer intermittently as a threat attempts to access your network.

  For your reference, I'll provide you with the support document HP on wireless connection problems. You already have the reset of the router so don't worry too much about those, but the other steps can help solve this problem for you:

  Printer keeps no connection Wi - Fi

  If these steps don't are still not solved the problem I recommend you talk to your router manufacturer to get them to open the appropriate printer ports.

  -Incoming (UDP) Ports: