IPhone and cisco vpn question
All, I have an IPhone and I'm VPN'ing in a SAA with IOS 8.2.2. I do not have vpn'ing of issues, but I have a question that is causing quite a stir here. When I try to use names rather than IP addresses (trying to access a server or an internal Web site), the client does not receive DNS answers. I can get to the servers via IP, but not by the name of the server. I can use the same PCF file for my laptop, and it works fine. Someone at - it a resolution to this scenario? Any help appreciated.
Add the domain name in the attributes of Group Policy: -.
value by default-domain MYDOMAIN.COM
Manish
Tags: Cisco Security
Similar Questions
-
Kernel panic reproducible when using VMWare Fusion and Cisco VPN
I can reliable reproduce a kernel panic when I use VMWare Fusion and Cisco VPN set.
Using either done alone causes no problem.
I'm on a mac book pro using the latest updates from Apple for Leopard.
My question is: How can I report this to VMWare without having to pay for support?
When I go to the VMWare fusion support page he wants me to pay for an incident.
I really do not want to pay them to help solve a kernel panic. (They pay me .)
Announcing the details here (don't forget to join the panic.log as in HOWTO: ask (and answer) Questions) will work.
-
RT for Windows and Cisco VPN (AnyConnect) Solutions?
Microsoft and Cisco are working together to ensure Cisco VPN is soon available for Windows RT? I read a thread RT of Windows from Microsoft and Cisco VPN without seeing all the comments of Microsoft or Cisco. Please notify.
Hi Gabriel,
The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:
-
SafeNet and Cisco VPN Client Compatible?
I have been using the Cisco VPN for quite awhile with no problems. Recently, we have added a Watchguard Firebox somewhere else and have installed the Client of Watchguard MUVPN, otherwise known as a customer of Safenet.
Since the installation, I could not yet properly use the Cisco Client. If I disable the two Services of Safenet, I invited to my user id and password and connect to the Cisco Concentrator and get an ip, etc. However, I can't ping anything on the network.
My solution is to completely uninstall both clients and reinstall the Cisco by itself. This is not very practical.
If anyone know a fix for this I'd appreciate comments.
Thank you
Patrick Dunnigan
Hi Patrick,
I only got lucky with the SafeNet customer brand Watchguard with the 4.0.x releases of the Cisco client. I think Cisco 4.6 clients use a newer driver from the DNE or else that plays well with SafeNet.
In any case, here's how to set up PC that requires both clients:
First, install the Cisco VPN client. Restart the application, and then stop and disable the Windows service.
Install the client for Watchguard, reboot as requested.
Then, stop and set to manual both SafeNet services, then start and set to automatic the Cisco service.
Delete the shortcut in your Start menu Startup group safecfg.exe (or the key of HKLM\MS\Windows\CurrentVer\Run, where he gets set.)
Delete the shortcut to start for the Cisco VPN client as well.
Whenever you want to use the Cisco customer, you can just launch the Dialer to IPSec. If you want to run the SafeNet client, stop the Cisco service, start the services of SafeNet, then run safecfg.exe. A few batch files facilitate this process for users.
Hope that helps,
Chris
-
MS RADIUS and Cisco VPN client
We currently have with a Server Windows RAS and IAS authentication with PPTP to users.
I want to move a hub (we have two not used) and the use of the Cisco VPN client with IPSEC 3005, also using the RADIUS (IAS) in Windows to authenticate against Active Directory.
I have a config to work for the client and it performs authentication, but I'm afraid that you can't configure IAS to work with IPSEC, unless you configure the policy for
"Unencrypted authentication (PAP, SPAP).
on the Authentication tab
and
"No encryption".
on the encryption tab.
Are encrypted with IPSEC credentials to establish the tunnel of the Cisco VPN client?
For RADIUS PAP authentication, the user name is clear and the password is encrypted with the RADIUS shared secret.
To maximize security, you would use GANYMEDE + or IPSec transport mode and isolated VLAN. But for most of us, strong passwords and physical security prevents the RADIUS PAP to a significant weakness.
-
buy the new iphone and IOS version questions
Hello
am about to buy a new iphone and you're wondering how to find which exact version of IOS a. sellers say its IOS is 9, well no, I want to know the version of it as if its 9.0.2 or 9.1 something like that. is it far from finding in his series on the box? I don't want to buy the iphone and do not know how to check. Help, please.
Hello
don't worry abt the IOS version, after having bought the phone, you can update to the latest IOS 9.3 by yourself... See you soon.
-
I'm having a problem on a new ASA. I am able to connect to the client? s network using the Cisco VPN client, but I'm not able to PING or access anything on the client network. What needs to be done to solve this problem?
There is a road on the client? s router pointing back to the firewall for the IP range you get when you VPN into?
Thank you
Chris
try to add to the ASA... This is disabled by default
ISAKMP nat-traversal
-
PIX-Sonicwall Site-to-Site and Cisco VPN Client
I have a firewall 506th PIX with a VPN site-to site for a firewall Sonicwall 330 Pro which works perfectly. I would like to add the functionality of remote users connecting to the network using the client VPN from Cisco PIX. I'm under the question of having only a single card encryption applied to the external interface. I need the feature to have the tunnel between the site to site VPN can be undertaken on other, so I can't use a dynamic encryption card. Does anyone have suggestions or knowledge on how to achieve this?
Thank you.
You don't need to add another card encryption to the external interface. You simply add customer information to your existing card for example:
Crypto ipsec transform-set esp-3des esp-sha-hmac YOURSET
YOURMAP 10 ipsec-isakmp crypto map
card crypto YOURMAP 10 corresponds to 100 address
card crypto YOURMAP 10 set counterpart x.x.x.x
crypto YOURMAP 10 the transform-set YOURSET value card
set of 10 CUSTOMERS crypto dynamic-map transform-set YOURSET
card crypto YOURMAP 90-isakmp dynamic ipsec CLIENTS
-
NAT via LAN-to-LAN configuration between router IOS and Cisco VPN 3000
Hello
I have the following document on the creation of a virtual LAN2LAN including NAT private network.
It? s easily do this with the hub. Now, I have to set it up on the IOS router, and for this purpose, I can? t find any information. NAT, I have my private network to a single IP address that must be by tunnel as my local network official.
Anyone have documentation on this szenario? I can? t is not on the OCC.
Thanks for the support
Hello.
Concentrators are very friendly units (IMHO) to VPN with NAT and VPN.
You build an acl defined traffic over the vpn (110) based on the nat wouldn't
You create an acl to set what is NAT had (111) and create a NAT statement accordingly
Here is an example configuration.
!
crypto ISAKMP policy 10
BA 3des
md5 hash
preshared authentication
Group 2
vpnsrock crypto isakmp key! address x.x.x.x
!
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
!
10 VPN ipsec-isakmp crypto map
defined peer x.x.x.x
game of transformation-ESP-3DES-SHA
match address 110
!
interface Fa0
NAT outside IP
VPN crypto card
!
!
interface fa1
IP nat inside
!
IP nat inside source list 111 interface fa0 overload
IP route 0.0.0.0 0.0.0.0 y.y.y.y
access-list 110 permit ip fa0 - ip network-remote control-generic generic-mask
access-list 111 allow local-network ip network-remote control-generic generic-mask
!
-
L2l using routers Cisco VPN question
I can successfully configure an L2L IPSec VPN between two ASAs but using a similar configuration on Cisco routers, I can't establish a tunnel ping to the local LAN interface on the other, but two, NY and Burlington, routers can ping each and other WAN interface. Here is the configuration of routers and a version of the show; I have attached the config files complete and the screenshot of the topology.
I appreciate all help.
The fF0/0 - ISP - F0/0 Burlington NY
See the version
Cisco IOS Software, software 3600 (C3640-IK9S-M), Version 12.4 (25), RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Updated Thursday, August 18, 10 06:59 by prod_rel_teamROM: ROMMON emulation Microcode
ROM: 3600 Software (C3640-IK9S-M), Version 12.4 (25), RELEASE SOFTWARE (fc1)The availability of NY is 0 minutes
System returned to ROM by unknown charge cause - suspect boot_data [BOOT_COUNT] 0 x 0, BOOT_COUNT 0, BOOTDATA 19
System image file is "tftp://255.255.255.255/unknown".Cisco 3640 (R4700) Prozesseur (revision 0xFF) 124928K / 6144K bytes of memory.
Card processor ID FF1045C5
R4700 CPU at 100 MHz, 33, Rev 1.2 implementation
2 FastEthernet interfaces
Configuration of DRAM is wide with parity 64-bit capable.
125K bytes of NVRAM memory.
8192 K bytes of processor onboard flash system (read/write)Configuration register is 0 x 2102
NY router
crypto ISAKMP policy 1
BA aes 256
preshared authentication
Group 2
address of ThisIsAWeekKey key crypto isakmp 172.16.2.2
!
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac L2L
!
Burlington 1-isakmp ipsec crypto map
defined peer 172.16.2.2
game of transformation-L2L
match address Burlington-NW
!
!
interface FastEthernet0/0
address 172.16.1.2 IP 255.255.255.252
automatic duplex
automatic speed
card crypto Burlington
!
interface FastEthernet1/0
IP 10.0.1.1 255.255.255.0
automatic duplex
automatic speed
!
no ip address of the http server
no ip http secure server
!
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 172.16.1.1
!
!
Burlington-NW extended IP access list
ip licensing 10.0.1.0 0.0.0.255 10.0.2.0 0.0.0.255Burlington router
crypto ISAKMP policy 1
BA aes 256
preshared authentication
Group 2
address of ThisIsAWeekKey key crypto isakmp 172.16.1.2
!
!
Crypto ipsec transform-set esp - aes 256 esp-sha-hmac L2L
!
NY 1 ipsec-isakmp crypto map
defined peer 172.16.1.2
game of transformation-L2L
match address NY - NW
!
!
interface FastEthernet0/0
IP 172.16.2.2 255.255.255.252
automatic duplex
automatic speed
card crypto NY
!
interface FastEthernet1/0
IP 10.0.2.1 255.255.255.0
automatic duplex
automatic speed
!
no ip address of the http server
no ip http secure server
!
IP forward-Protocol ND
IP route 0.0.0.0 0.0.0.0 172.16.2.1
!
!
NY - NW extended IP access list
IP 10.0.2.0 allow 0.0.0.255 10.0.1.0 0.0.0.255No problem, we learn every day
Please kindly marks the message as answered while others can also learn from your post. Thank you.
-
Multicast and cisco VPN client
I have an XP PC which is on a remote site, I need to connect to my corporate network through the VPN client. This PC has 2 cards NIC - one for a private LAN, which receives the data via multicast, and a public LAN, which will be used for the VPN.
When I connect the VPN, multicast reception stops. Is it possible to activate on the second NIC card (private)?
Can you go into the network card properties, disable / uncheck deterministic Network Enhancer and see if that makes a difference?
-
Hi Mokhalil82,
It's pretty weird that the ASA will show phases 1 and 2 upward and the Watchguard show that phase 1 is not.
It is possible that the tunnel will appear next to the ASA but gets terminated in the same instant that thus we see the phase 1 and 2 momentarily upward.
Would you be able to share the outputs debug?Kind regards
Dinesh MoudgilPS Please rate helpful messages
Thanks for the update, Mokhalil82
For the last time, to simultaneously debug both sides and share issues, I think we can dig with that information.
In addition, if we can capture packet as well, that will be useful.Make sure that the date and time is correct on both sides.
Kind regards
Dinesh MoudgilPS Please rate helpful messages.
-
Cisco VPN and TOSHIBA 3G cards
Hello
Since the introduction of WIN7 there was a big problem with the Cisco VPN client and 3G cards.
See the next on the Cisco support forum thread: https://supportforums.cisco.com/thread/2017102The interesting part is this post:
https://supportforums.Cisco.com/message/3166246#3166246
It seems that Cisco uses what is called Citrix DNE.So I Googled it and came up with this link:
http://www.Citrix.com/lang/English/LP/lp_1680845.aspOn this page it says:
DNE now supports the WWAN devices in Win7. Before you download the latest version of DNEUpdate from the links below, make sure you have the latest drivers for your network card by downloading from the websites of sellers.It might be a long shot, but someone can it there with a card 3 G TOSHIBA, win7, and cisco VPN access, try this new version of Citrix DNE?
You have Toshiba laptop with 3G card?
Can you test for us and post the result?I n t have Win7 on my machine.
-
After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?
This was the solution! The works of vpn as $ 1 million now. I followed the instructions above to enter the uninstall program and selecting the repair option. I rebooted the machine, then used the troubleshooting on vpn software compatibility option. Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.
Thanks, Nick!
Rick
-
Clients vpn AnyConnect and cisco using the same certificate
Can use the same certificate on the ASA client Anyconnect and cisco vpn ikev1-2?
John.
The certificate is to identify a user/machine rather than the Protocol, then Yes, generally 'yes' you can use the same certificate for SSL/IKEv1/IKEv2 connections.
What you need to take care of, it's that said certificate is fulliling Elements of the Protocol, for example implmentations IKEv2 is 'necessary' particular KU are defined and client-server-auth/auth EKU are defined on the certificates.
M.
Maybe you are looking for
-
Problems of 64-bit Vista Home Premium, Ultimate upgrade
I recently bought a laptop HP Pavilion dv4-1144us with 64-bit Windows Vista Home Premium (with SP1) pre-installed electronics Fry as well as a copy of the upgrade to Windows Vista Ultimate Edition (with SP1) because I need to the ability to connect t
-
Stop the system with 06000008e - ati3duag.dll
I reformatted my C drive, install drivers and most of my programs. After a few days to rebuild the computer system started stopping itself. This continues to happen after 5 minutes. You will understand that I had thought that the reconstruction wo
-
I'm operating Vista Ultimate with 64-bit system. This happens in all the applications I use. I will allow me to scroll through 15 to 20 pages until I can stop and then need to find the orginial page, sure I was. I don't know what o call it. Tried
-
I have Windows 7 Home Premium. I just bought a unit of the electronic cigarette, manufacturer is "Innokin Cool Fire IV", the usb charger plugged on Acer laptop and comes to the screen "USB device not recognized". I loaded different brand before wit
-
Remove the zeros of alphanumeric text
Hello Anyone know how to remove the zeros of alphanumeric text? For example 0012345678 result:-12345678 0000000001 result:-1.