L2l using routers Cisco VPN question

Similar Questions

• Unable to connect using the Cisco VPN client

  Hi all. I recently configured a 5510 ASA to allow remote access using the Cisco VPN client. The problem is that everything works fine when I connect using a modem classic or on a computer with a public address that I use for testing purposes, but whenever I try to connect with on an ADSL line, I can't access to the resources. I have connection and after that nothing, I can not achieve anything.

  I enclose the relevant configuration information in the attachment. Any help is welcome.

  Depending on the version, add...

  ISAKMP nat-traversal

  or

  ISAKMP nat-traversal crypto

  Should be all you need.

• Using a Cisco VPN on iPad and incorporating RSA tokens

  Hello community of Cisco,

  I have what seems like a simple question.  I have almost no experience network so hopefully someone here can answer that.  I have this project iPad for my internship in which they want to create a remote access to their network using a VPN and a soft/hard security token.  It seems that they already use hard tokens RSA for their current home VPN connections.  They use portable computers to their home but want to start using iPads as well.  So my question is, an iPad can support a Cisco VPN using hard tokens RSA authentication? I just need a concrete answer to the management of work and literally just give them somewhere to start.  Thank you for taking the time to read my question and reply.

  Phil

  Phil,

  AnyConnect on iphone/ipad/ipod should be able to handle hardtoken auth, but with softoken itegration could be problematic (the last time I heard that it was not supported at all).

  M.

• How to connect to the CISCO VPN server without using the CISCO VPN client (from dialog Windows VPN)

  Hello world

  I have a cisco router 2800 installed in our company
  and I have it configured as a VPN server for professional help (cisco configuration)
  with the ease of the VPN Server Wizard
  Can I connect to this server using windows XP or 7 dialog VPN?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers community. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope this helps!

• IPhone and cisco vpn question

  All, I have an IPhone and I'm VPN'ing in a SAA with IOS 8.2.2.  I do not have vpn'ing of issues, but I have a question that is causing quite a stir here.  When I try to use names rather than IP addresses (trying to access a server or an internal Web site), the client does not receive DNS answers.  I can get to the servers via IP, but not by the name of the server.  I can use the same PCF file for my laptop, and it works fine.  Someone at - it a resolution to this scenario?  Any help appreciated.

  Add the domain name in the attributes of Group Policy: -.

  value by default-domain MYDOMAIN.COM

  Manish

• Routers Cisco VPN client

  Hello, I have the staging that follows

  CLIENT VPN--> INTERNET--> SITE (router A)--> L2L--> SITE B

  (ROUTER B)--> HOST

  SITE of the router has

  192.168.3.254

  B router SITE

  192.168.0.254

  HOST

  IP 192.168.0.4

  Client VPN pool

  192.168.21.0/24

  We can ping router B 192.168.0.254 trought vpn client connected to the public ip address on a SITE, but the hosts on 192.168.0.0/24 192.168.0.4 for example are inaccessible.

  It is similar to this post: http://itknowledgeexchange.techtarget.com/itanswers/routing-between-vpn-networks

  ¿Need I have a few extra conf for access the 192.168.0.4... split tunnel, allow unencrypted traffic or something, forcing some courses like that?

  Thank you

  We have this Conference:

  ROUTER

  version 12.4

  no service button

  horodateurs service debug uptime

  Log service timestamps uptime

  encryption password service

  !

  host name 857-

  !

  boot-start-marker

  boot-end-marker

  !

  enable secret 5 xxxxxxxx

  !

  AAA new-model

  !

  !

  local XXXXX of AAA authentication login.

  AAA authorization network default local

  !

  AAA - the id of the joint session

  !

  resources policy

  !

  !

  !

  IP cef

  name of the IP-server 193.152.63.197

  name of the IP-server 194.224.52.36

  name of the IP-server 195.235.113.3

  !

  !

  !

  user name admin secret of privilege 15 5 XXXXXXXXXXXXXXXXXXXXXXXX

  username secret outside privilege 15 5 XXXXXXXXXXXXXXXXXXX

  !

  !

  !

  crypto ISAKMP policy 1

  md5 hash

  preshared authentication

  !

  crypto ISAKMP policy 3

  BA 3des

  preshared authentication

  Group 2

  address key crypto isakmp 79.148.114.239 XXXXXXXXXXXXXXXXX

  ISAKMP crypto key XXXXXXXXXXXXXXXXXX address 80.59.215.201 No.-xauth

  !

  ISAKMP crypto client configuration group grupesaguadalajara

  key to XXXXXXXXXXXXXX

  pool XXXXXapool

  ACL 145

  !

  !

  Crypto ipsec transform-set esp - esp-md5-hmac InsLanSet

  Crypto ipsec transform-set esp-3des esp-sha-hmac VPNclient

  !

  Crypto-map dynamic dynmap 10

  game of transformation-VPNclient

  market arriere-route

  !

  !

  card crypto InsLanMap address Dialer1

  card crypto client InsLanMap of authentication list userauthen

  card crypto isakmp authorization list groupauthor InsLanMap

  client configuration address card crypto InsLanMap answer

  map InsLanMap 1 ipsec-isakmp crypto

  set of peer 80.59.ZZZ. Default ZZZ

  game of transformation-InsLanSet

  match address 125

  map InsLanMap 10-isakmp ipsec crypto dynamic dynmap

  !

  !

  !

  ATM0 interface

  no ip address

  no ip-cache cef route

  no ip route cache

  no ip mroute-cache

  No atm ilmi-keepalive

  PVC 8/32

  aal5snap encapsulation

  Protocol ip inarp

  PPPoE-client dial-pool-number 1

  !

  DSL-automatic operation mode

  !

  interface FastEthernet0

  !

  interface FastEthernet1

  !

  interface FastEthernet2

  !

  interface FastEthernet3

  !

  interface Vlan1

  192.168.3.254 IP address 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  no ip mroute-cache

  !

  interface Dialer1

  bandwidth 10000

  the negotiated IP address

  IP mtu 1452

  NAT outside IP

  IP virtual-reassembly

  encapsulation ppp

  IP tcp adjust-mss 1452

  Dialer pool 1

  Dialer-Group 1

  PPP authentication chap callin pap

  PPP chap hostname [email protected] / * /

  PPP chap password 7 00051715084B1B16

  PPP pap sent-username [email protected] / * / 01120217571B161F password 7

  card crypto InsLanMap

  !

  IP pool local XXXXapool 192.168.21.100 192.168.21.120

  IP route 0.0.0.0 0.0.0.0 Dialer1

  !

  no ip address of the http server

  no ip http secure server

  IP nat inside source overload map route sheep interface Dialer1

  !

  access-list 1 permit 192.168.3.0 0.0.0.255

  access-list 2 permit 192.168.21.0 0.0.0.255

  access-list 6 allow 212.0.103.162

  access-list 6 allow 212.0.103.166

  access-list 6 allow 212.0.103.169

  access-list 6 allow 192.168.3.0 0.0.0.255

  access-list 120 deny ip 192.168.3.0 0.0.0.255 192.168.21.0 0.0.0.255

  access-list 120 deny ip 192.168.3.0 0.0.0.255 192.168.0.0 0.0.0.255

  access-list 120 deny ip 192.168.21.0 0.0.0.255 192.168.0.0 0.0.0.255

  access-list 120 deny ip 192.168.0.0 0.0.0.255 192.168.21.0 0.0.0.255

  access-list 120 allow ip 192.168.3.0 0.0.0.255 any

  access-list 125 allow ip 192.168.3.0 0.0.0.255 192.168.0.0 0.0.0.255

  access-list 125 allow ip 192.168.21.0 0.0.0.255 192.168.0.0 0.0.0.255

  access list 145 host ip 192.168.3.1 permit 192.168.21.0 0.0.0.255

  access list 145 host ip 192.168.0.4 permit 192.168.21.0 0.0.0.255

  access-list 145 allow ip 192.168.0.0 0.0.0.255 192.168.21.0 0.0.0.255

  Dialer-list 1 ip protocol allow

  sheep allowed 10 route map

  corresponds to the IP 120

  !

  !

  control plan

  !

  Line con 0

  exec-timeout 120 0

  no activation of the modem

  StopBits 1

  line to 0

  line vty 0 4

  access-class 6

  exec-timeout 0 0

  !

  max-task-time 5000 Planner

  end

  ROUTER B

  Current configuration: 6051 bytes

  !

  version 12.3

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  encryption password service

  !

  host name of the Center-1721

  !

  boot-start-marker

  boot-end-marker

  !

  enable secret 5 vien.

  enable password 7 abdelkrim

  !

  MMI-60 polling interval

  No mmi self-configuring

  No pvc mmi

  MMI snmp-timeout 180

  AAA new-model

  !

  !

  AAA authentication login userauthen local

  AAA authorization groupauthor LAN

  AAA - the id of the joint session

  IP subnet zero

  !

  !

  name of the IP-server 193.152.63.197

  name of the IP-server 194.224.52.36

  name of the IP-server 195.235.113.3

  !

  IP cef

  Max-events of po verification IP 100

  !

  !

  user name admin secret of privilege 15 5 XXXXXXXXXXXXXXXXXXXX

  !

  !

  !

  crypto ISAKMP policy 10

  preshared authentication

  Group 2

  !

  crypto ISAKMP policy 20

  md5 hash

  preshared authentication

  !

  crypto ISAKMP policy 25

  BA 3des

  md5 hash

  preshared authentication

  ISAKMP crypto key XXXXXXXXXXXXXXXXXX address 80.37.zzz.zzz No.-xauth

  ISAKMP crypto key XXXXXXXXXXXXXXXXXX address 217.126.zzz.zzz No.-xauth

  ISAKMP crypto key XXXXXXXXXXXXXXXXXX address 80.35.zzz.zzz No.-xauth

  ISAKMP crypto key XXXXXXXXXXXXXXXXXX address 79.148.zz.zzz No.-xauth

  ISAKMP crypto key XXXXXXXXXXXXXXXXXX address 83.61.zzz.zzz No.-xauth

  ISAKMP crypto key XXXXXXXXXXXXXXXXXX address 79.148.zzz.zzz No.-xauth

  ISAKMP crypto key XXXXXXXXXXXXXXXXXX address 213.96.zzz.zzz No.-xauth

  !

  Configuration group customer isakmp crypto ClienteSVPN

  key of XXXXXXXXXXXXXXXX

  pool PoolClientesVPN

  ACL 199

  !

  !

  Crypto ipsec transform-set esp - esp-md5-hmac InsLanSet

  Crypto ipsec transform-set esp-3des esp-md5-hmac infoport

  !

  crypto dynamic-map ClientesVPN 10

  game of transformation-InsLanSet

  !

  !

  card crypto client InsLanMap of authentication list userauthen

  card crypto isakmp authorization list groupauthor InsLanMap

  client configuration address card crypto InsLanMap answer

  map InsLanMap 1 ipsec-isakmp crypto

  the value of 80.37.zzz.zzz peer

  game of transformation-InsLanSet

  match address 127

  map InsLanMap 2 ipsec-isakmp crypto

  the value of 217.126.zzz.zzz peer

  the value of 80.25.zzz.zzz peer

  game of transformation-InsLanSet

  match address 129

  card InsLanMap 3 ipsec-isakmp crypto

  the value of 80.35.zzz.zzz peer

  game of transformation-InsLanSet

  match address 126

  card InsLanMap 4 ipsec-isakmp crypto

  ! Incomplete

  the value of 79.148.zzz.zzz peer

  the value of 213.96.zzz.zzz peer

  game of transformation-InsLanSet

  match address 125

  map InsLanMap 6 ipsec-isakmp crypto

  the value of 83.61.zzz.zzz peer

  game of transformation-InsLanSet

  match address 130

  card crypto InsLanMap 99-isakmp dynamic ipsec ClientesVPN

  !

  !

  !

  interface Loopback12

  IP 192.168.53.10 255.255.255.0

  !

  ATM0 interface

  no ip address

  no ip mroute-cache

  no automatic atm configuration

  No atm ilmi-keepalive

  No atm-registration address

  No atm ilmi activation

  Bundle-enable

  DSL-automatic operation mode

  waiting-208 in

  !

  point-to-point interface ATM0.1

  IP address 80.59.zzz.zzz 255.255.255.192

  NAT outside IP

  card crypto InsLanMap

  PVC 8/32

  aal5snap encapsulation

  !

  !

  interface FastEthernet0

  IP 192.168.0.254 255.255.255.0

  IP nat inside

  no ip mroute-cache

  automatic speed

  !

  IP pool local PoolClientesVPN 192.168.254.1 192.168.254.254

  IP nat Infoport 192.168.53.1 pool 192.168.53.1 netmask 255.255.255.0

  IP nat inside source list 100 interface ATM0.1 overload

  overload of IP nat inside source list 150 pool Infoport

  IP classless

  IP route 0.0.0.0 0.0.0.0 ATM0.1

  no ip address of the http server

  no ip http secure server

  !

  !

  access-list 5 permit 212.0.103.162

  access-list 5 permit 212.0.103.166

  access-list 5 permit 212.0.103.169

  access-list 5 permit 192.168.0.0 0.0.0.255

  access-list 100 deny ip 192.168.0.0 0.0.0.255 172.16.11.0 0.0.0.255

  access-list 100 deny ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 100 deny ip 192.168.0.0 0.0.0.255 192.168.3.0 0.0.0.255

  access-list 100 deny ip 192.168.0.0 0.0.0.255 192.168.4.0 0.0.0.255

  access-list 100 deny ip 192.168.0.0 0.0.0.255 192.168.5.0 0.0.0.255

  access-list 100 deny ip 192.168.0.0 0.0.0.255 192.168.8.0 0.0.0.255

  access-list 100 deny ip 192.168.0.0 0.0.0.255 192.168.9.0 0.0.0.255

  access-list 100 deny ip 192.168.0.0 0.0.0.255 192.168.254.0 0.0.0.255

  access-list 100 deny ip 192.168.0.0 0.0.0.255 192.168.21.0 0.0.0.255

  access-list 100 permit ip 192.168.0.0 0.0.0.255 any

  access-list 126 allow ip 192.168.0.0 0.0.0.255 192.168.5.0 0.0.0.255

  access-list 127 allow ip 192.168.0.0 0.0.0.255 192.168.9.0 0.0.0.255

  access-list 128 allow ip 192.168.0.0 0.0.0.255 192.168.8.0 0.0.0.255

  access-list 129 allow ip 192.168.0.0 0.0.0.255 192.168.4.0 0.0.0.255

  access-list 130 allow ip 192.168.0.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 150 permit ip 192.168.0.0 0.0.0.255 172.16.11.0 0.0.0.255

  access-list 150 deny ip 192.168.0.0 0.0.0.255 any

  access-list 199 permit ip 192.168.0.0 0.0.0.255 192.168.254.0 0.0.0.255

  !

  Line con 0

  line to 0

  line vty 0 4

  access-class 5

  !

  end

  Are you sure that router B has the right configuration?

  I don't see any ACL crypto to router that has subnets 192.168.3.0/24 and 192.168.21.0/24

• ASA Cisco VPN question

  Hi Mokhalil82,

  It's pretty weird that the ASA will show phases 1 and 2 upward and the Watchguard show that phase 1 is not.

  It is possible that the tunnel will appear next to the ASA but gets terminated in the same instant that thus we see the phase 1 and 2 momentarily upward.
  Would you be able to share the outputs debug?

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages

  Thanks for the update, Mokhalil82

  For the last time, to simultaneously debug both sides and share issues, I think we can dig with that information.
  In addition, if we can capture packet as well, that will be useful.

  Make sure that the date and time is correct on both sides.

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• VPN between 2 routers Cisco 1841 (LAN to LAN)

  Hello

  I need to connect two offices (two different LAN) using routers cisco 1841 at both ends.

  Currently the two cisco router are in working condition and refer the internet LAN clients. (making the NAT).

  Can someone please tell us what is the easiest way to set up a VPN between two sites, so that LAN users to an office to access mail servers electronic/request to the office LAN.

  I understand that I need IPSec Site to Site VPN (I think).

  Anyonce can you please advise.

  Kind regards.

  s.nasheet wrote:
  Hi ,
  I need to connect two offices ( two different LAN's) together using cisco 1841 routers at both end.
  Currently both cisco router are in working order and  acting as a internet gateway to the LAN clients. ( doing NAT).
  Can anybody please advise what is the easiest method to configure VPN between two sites so that  LAN users at one office be able to access  the  email/application servers at the other LAN office.
  I understand I need IPSec Site to Site VPN  ( i think).
  Can anyonce please advise.
  Regards.
  

  Yes, you need a VPN site-to site. Start with this link which gives a number of examples to set up a VPN S2S between 2 routers Cisco.

  http://www.Cisco.com/en/us/Tech/tk583/TK372/tech_configuration_examples_list.html#anchor16

  Jon

• Different classes using Cisco VPN Client VPN

  Hello

  on a cisco ASA 5510, I defined a vpn group used for remote teleworkers who have access to the entire LAN using Cisco VPN Client 4.8.

  I would give to others of this client, but I need to limit their access to LAN resources, which means that I have to have two types of users:

  Remote LAN access

  access to only certain IP addresses

  Both must use the Cisco VPN client.

  How can I do?

  Thank you

  This link should help.

  http://www.Cisco.com/en/us/products/HW/vpndevc/ps2030/products_configuration_example09186a0080641a52.shtml

• How to use Windows 7 64-bit cisco vpn client?

  Hello

  I want to use the cisco vpn client to connect to my Institute.

  I use Windows 7 64-bit edition Home premium.

  I tried several options, but nothing has worked.

  Please suggest me the correct procedure to run on my Windows 7 64 bit Home Premium Cisco vpn client.

  Thanks in advance,

  Federico

  VPNclient is not yet supported on 64-bit windows.

  However, there is a beta version of the next 5.0.7 version that does.

  Have you tried this version? If so, what are the exact symptoms?

  Edit: you can download the 5.0.7 beta here

• Setup for use with Cisco Anyconnect VPN IPsec

  So, I had trouble setting up VPN on our ASA 5510. I would use IPsec VPN so that we don't have to worry about licensing issues, but what I have read you can do with and always use Cisco Anyconnect. My knowledge on how to set up VPN especially in iOS version 8.4 is limited, so I've been using a combination of command line and ASDM.

  I am finally able to connect from a remote location, but once I log in, nothing else works. What I've read, you can use IPsec for client-to-lan connections. I use a pre-shared for this. Documentation is limited on what should happen after have connected you? Shouldn't be able to local access on the vpn connection computers? I'm trying to implement work. If I have VPN from home, should not be able to access all of the resources at work? According to me, because I used the command-line as ASDM I confused some of the configuration. In addition, I think that some of the default policies are confused me too. So I probably need a lot of help. Here is my current setup with the changed IP address and other things that are not related to deleted VPN.

  NOTE: We are still testing this ASA and is not in production.

  Any help you can give me is greatly appreciated.

  ASA Version 8.4 (2)

  !

  ASA host name

  domain.com domain name

  !

  interface Ethernet0/0

  nameif inside

  security-level 100

  the IP 192.168.0.1 255.255.255.0

  !

  interface Ethernet0/1

  nameif outside

  security-level 0

  IP 50.1.1.225 255.255.255.0

  !

  interface Ethernet0/2

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Ethernet0/3

  Shutdown

  No nameif

  no level of security

  no ip address

  !

  interface Management0/0

  No nameif

  security-level 100

  IP 192.168.1.1 255.255.255.0

  !

  boot system Disk0: / asa842 - k8.bin

  passive FTP mode

  DNS domain-lookup outside

  DNS server-group DefaultDNS

  !

  permit same-security-traffic intra-interface

  !

  network of the NETWORK_OBJ_192.168.0.224_27 object

  subnet 192.168.0.224 255.255.255.224

  !

  object-group service VPN

  ESP service object

  the purpose of the tcp destination eq ssh service

  the purpose of the tcp destination eq https service

  the purpose of the service udp destination eq 443

  the destination eq isakmp udp service object

  !

  allowed IP extended ip access list a whole

  !

  mask 192.168.0.225 - 192.168.0.250 255.255.255.0 IP local pool VPNPool

  no failover

  failover time-out period - 1

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 645.bin

  don't allow no asdm history

  ARP timeout 14400

  NAT (inside, outside) static source any any static destination NETWORK_OBJ_192.168.0.224_27 NETWORK_OBJ_192.168.0.224_27 non-proxy-arp-search to itinerary

  !

  the object of the LAN network

  NAT dynamic interface (indoor, outdoor)

  Access-group outside_in in external interface

  Route outside 0.0.0.0 0.0.0.0 50.1.1.250 1

  Sysopt noproxyarp inside

  Sysopt noproxyarp outdoors

  Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec ikev2 ipsec-proposal OF

  encryption protocol esp

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 proposal ipsec 3DES

  Esp 3des encryption protocol

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 ipsec-proposal AES

  Esp aes encryption protocol

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 ipsec-proposal AES192

  Protocol esp encryption aes-192

  Esp integrity sha - 1, md5 Protocol

  Crypto ipsec ikev2 AES256 ipsec-proposal

  Protocol esp encryption aes-256

  Esp integrity sha - 1, md5 Protocol

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint ASDM_TrustPoint0

  registration auto

  name of the object CN = ASA

  Configure CRL

  crypto ca server

  Shutdown

  string encryption ca ASDM_TrustPoint0 certificates

  certificate d2c18c4e

  864886f7 0d06092a c18c4e30 308201f3 3082015c a0030201 d 020204 2 0d 010105

  0500303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609

  02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109

  3131 31303036 31393133 31365a 17 323131 30303331 39313331 0d 170d 6f6d301e

  365a303e 3110300e 06035504 03130741 53413535 3130312a 2 a 864886 30280609

  02161b 41 53413535 31302e64 69676974 616c 6578 7472656d 65732e63 f70d0109

  6f6d3081 9f300d06 092 has 8648 86f70d01 01010500 03818d b 30818902-00-818100-2

  8acbe1f4 5aa19dc5 d3379bf0 f0e1177d 79b2b7cf cc6b4623 d1d97d4c 53c9643b

  37f32caf b13b5205 d24457f2 b5d674cb 399f86d0 e6c3335f 031d54f4 d6ca246c

  234b32b2 b3ad2bf6 e3f824c0 95bada06 f5173ad2 329c28f8 20daaccf 04c 51782

  3ca319d0 d5d415ca 36a9eaff f9a7cf9c f7d5e6cc 5f7a3412 98e71de8 37150f02

  03010001 300 d 0609 2a 864886 f70d0101 05050003 8181009d d2d4228d 381112a 1

  cfd05ec1 0f51a828 0748172e 3ff7b480 26c197f5 fd07dd49 01cd9db6 9152c4dc

  18d0f452 50f5d0f5 4a8279c4 4c1505f9 f5e691cc 59173dd1 7b86de4f 4e804ac6

  beb342d1 f2db1d1f 878bb086 981536cf f4094dbf 36c5371f e1a0db0a 75685bef

  af72e31f a1c4a892 d0acc618 888b53d1 9b 888669 70e398

  quit smoking

  IKEv2 crypto policy 1

  aes-256 encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 10

  aes-192 encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 20

  aes encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 30

  3des encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  IKEv2 crypto policy 40

  the Encryption

  integrity sha

  Group 2 of 5

  FRP sha

  second life 86400

  Crypto ikev2 activate out of service the customer port 443

  Crypto ikev2 access remote trustpoint ASDM_TrustPoint0

  Crypto ikev1 allow outside

  IKEv1 crypto policy 10

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  IKEv1 crypto policy 65535

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 10

  Console timeout 0

  management-access inside

  SSL-trust outside ASDM_TrustPoint0 point

  WebVPN

  allow outside

  AnyConnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1

  AnyConnect image disk0:/anyconnect-linux-2.5.2014-k9.pkg 2

  AnyConnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 3

  profiles of AnyConnect VPN disk0: / devpn.xml

  AnyConnect enable

  tunnel-group-list activate

  internal VPN group policy

  attributes of VPN group policy

  value of server WINS 50.1.1.17 50.1.1.18

  value of 50.1.1.17 DNS server 50.1.1.18

  Ikev1 VPN-tunnel-Protocol, l2tp ipsec ikev2 ssl-client

  digitalextremes.com value by default-field

  WebVPN

  value of AnyConnect VPN type user profiles

  always-on-vpn-profile setting

  privilege of xxxxxxxxx encrypted password username administrator 15

  VPN1 xxxxxxxxx encrypted password username

  VPN Tunnel-group type remote access

  General-attributes of VPN Tunnel-group

  address (inside) VPNPool pool

  address pool VPNPool

  LOCAL authority-server-group

  Group Policy - by default-VPN

  VPN Tunnel-group webvpn-attributes

  enable VPN group-alias

  Group-tunnel VPN ipsec-attributes

  IKEv1 pre-shared-key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  class-map ips

  corresponds to the IP access list

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  Review the ip options

  inspect the netbios

  inspect the rsh

  inspect the rtsp

  inspect the skinny

  inspect esmtp

  inspect sqlnet

  inspect sunrpc

  inspect the tftp

  inspect the sip

  inspect xdmcp

  inspect the http

  class ips

  IPS inline help

  class class by default

  Statistical accounting of user

  I would recommend buy AnyConnect Essentials. The cost of the license is nominal - list of US $150 for the 5510. (piece number L-ASA-AC-E-5510 =)

  Meawwhile you can use the Cisco VPN client inherited with IKEv1 IPSec remote access VPN using profiles *.pcf.

  I believe you can also use the client Anyconnect client SSL or DTLS transport access remotely (non-IPsec) without having to buy the license Anyconnect Essentials for your ASA focus.

  As an aside, note that if you want to use AnyConnect Mobile (e.g. for iPhone, iPad, Android, Blackberry etc.clients) you will also get the additional license for it (L-ASA-AC-M-5510 =, also price US $150)

• Problems to connect via the Cisco VPN client IPSec of for RV180W small business router

  Hello

  I tried to configure my router Cisco of RV180W as a customer VPN IPSec, but have encountered a problem that I hope someone can help me with. "" I managed to do the work of configuration so that the Cisco's VPN IPSec client authenticates successfully with the XAUTH user, I put on the router, but during the negotiation, the client ends with the following, which appears several times on the router error message: ' Mar 20 Oct 19:41:53 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [34360] has no config mode.

  I've read around the internet and a number of people seem to say that the Cisco VPN Client is not compatible with the router, but the same thing happens to my iPhone VPN client.

  Is it possible that this can be implemented? Below, I have attached the full configuration files and the log files. Thank you much in advance.

  Router log file (I changed the IP addresses > respectively as well as references to MAC addresses)

  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: floating ports NAT - T with counterpart > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] WARNING: notification to ignore INITIAL-CONTACT > [44074] because it is admitted only after the phase 1.
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [4500]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT - D payload does not match for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received unknown Vendor ID
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: received Vendor ID: CISCO-UNITY
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: NAT detected: is located behind a device. NAT and alsoPeer is behind a NAT device
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: request sending Xauth for > [44074]
  Mar 20 Oct 20:03:10 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association established for > [4500] -> [44074] with spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REPLY' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: login successful for the user "myusername".
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser connected from the IP >
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: sending of information Exchange: Notify payload [10381]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: receives the type of the attribute 'ISAKMP_CFG_REQUEST' of > [44074]
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: ignored attribute 5
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28683
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] WARNING: attribute ignored 28684
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no config mode
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: local configuration for > [44074] has no mode config
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] ERROR: remove the invalid payload with doi:0.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: purged-Association of ISAKMP security with proto_id = ISAKMP and spi =>.
  Mar 20 Oct 20:03:15 2015 (GMT + 0000): [r1] [IKE] INFO: myusername XAuthUser Logged Out of the IP >
  Mar 20 Oct 20:03:16 2015 (GMT + 0000): [r1] [IKE] INFO: ISAKMP Security Association deleted for > [4500] -> [44074] with spi =>

  The router configuration

  screen_shot_10-20 - 15_at_09.00_pm.png

  

  IKE policy

  screen_shot_10-20 - 15_at_09.00_pm_001.png

  

  screen_shot_10-20 - 15_at_09.01_pm.png

  

  VPN strategy

  screen_shot_10-20 - 15_at_09.02_pm.png

  

  screen_shot_10-20 - 15_at_09.02_pm_001.png

  

  Client configuration

  Hôte : < router="" ip=""> >

  Authentication group name: remote.com

  Password authentication of the Group: mysecretpassword

  Transport: Enable Transparent Tunneling; IPSec over UDP (NAT/PAT)

  Username: myusername

  Password: mypassword

  Please contact Cisco.

  Correct, the RV180 is not compatible with the Cisco VPN Client.  The Iphone uses the Cisco VPN Client.

  You can use the PPTP on the RV180 server to connect a PPTP Client.

  In addition, it RV180 will allow an IPsec connection to third-party customers 3.  Greenbow and Shrew Soft are 2 commonly used clients.

• SafeNet and Cisco VPN Client Compatible?

  I have been using the Cisco VPN for quite awhile with no problems. Recently, we have added a Watchguard Firebox somewhere else and have installed the Client of Watchguard MUVPN, otherwise known as a customer of Safenet.

  Since the installation, I could not yet properly use the Cisco Client. If I disable the two Services of Safenet, I invited to my user id and password and connect to the Cisco Concentrator and get an ip, etc. However, I can't ping anything on the network.

  My solution is to completely uninstall both clients and reinstall the Cisco by itself. This is not very practical.

  If anyone know a fix for this I'd appreciate comments.

  Thank you

  Patrick Dunnigan

  Hi Patrick,

  I only got lucky with the SafeNet customer brand Watchguard with the 4.0.x releases of the Cisco client. I think Cisco 4.6 clients use a newer driver from the DNE or else that plays well with SafeNet.

  In any case, here's how to set up PC that requires both clients:

  First, install the Cisco VPN client. Restart the application, and then stop and disable the Windows service.

  Install the client for Watchguard, reboot as requested.

  Then, stop and set to manual both SafeNet services, then start and set to automatic the Cisco service.

  Delete the shortcut in your Start menu Startup group safecfg.exe (or the key of HKLM\MS\Windows\CurrentVer\Run, where he gets set.)

  Delete the shortcut to start for the Cisco VPN client as well.

  Whenever you want to use the Cisco customer, you can just launch the Dialer to IPSec. If you want to run the SafeNet client, stop the Cisco service, start the services of SafeNet, then run safecfg.exe. A few batch files facilitate this process for users.

  Hope that helps,

  Chris

• Cisco VPN only supports only 32-bit

  Hi all, I have 64-bit ram (2 GB) and windows 7 installed on... but my Cisco VPN supports only 32-bit only... my query is can I buy an another 32-bit (2 GB) and insert it in another location... .will it compatible?  enjoyed your answers... Thanks maou

  No, that succeed not compatible, you could dual boot with Windows 7 32 bit and you'd be able to use the CISCO VPN, you must purchase an additional license for the edition of Windows 7, you are running.

  Please see the following article with useful information about dual-boot:

  http://Windows.Microsoft.com/en-us/Windows7/can-I-have-more-than-one-operating-system-on-my-computer-multiboot

  Buy an additional license:

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  or

  You can upgrade to Windows 7 Professional or ultimate edition if you run or another edition and download free Windows XP Mode and use it there:

  Run in Windows XP Mode requires:

  (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

  Windows XP Mode and Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

  Windows XP Mode now accessible to more than PC

  http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

  Get started with Windows Virtual PC

  http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

  Windows 7 - upgrade Express features:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

• Problem with the Cisco VPN and Vista client

  Hello

  I have an easy VPN server configured on a c2811 and users use the Cisco VPN client. Lately, I have users running Windows Vista 64 bit and I need to know what is the correct version of the vpn client, I have to use and the compatibility problems with the server, I configured.

  Thank you and best regards.

  Cisco VPN Client doesn't have any version that is compatible with Vista 64 bit OS. The only customer that Cisco has released that supports the 64 bit OS's AnyConnect, but it is only supported on the CISCO ASA Appliance