iPhone off to 30% of battery and would not turn on until I plugged it?

I have an iPhone with 16 GB of storage 6.  I never had this problem or a question similar to this one before.  I'm currently updating on iOS 9.2.1.

I was walking home from school today and everything trying to remember my mother-in-law, my phone (which is around 35% at this point) cut himself off from any incentive and displays the image bit appears when the phone is too low and he wants that you plug in.  I went back home and as soon as the charger is plugged into the phone (like, literally, the split second he was completely) the phone showed the startup screen white and then fully charged, he had about 30% battery remaining.  This caused a huge problem because my family thought something had happened, and I was wondering if anyone had suggestions on how to avoid this problem and solving persistent problems that this could cause.

Also, I didn't know where to post this, so I apologize if it was not in the right section.  Thank you!

The first step to solve this problem is to calibrate your battery. Let your battery drain until your phone stops at 1%. If he dies before, then plug back in it for no more than a minute, unplug it, and then continue to use until you reach 1%. You may need to plug several times.

If this does not work, or if the problem persists, see this article.

Tags: iPhone

Similar Questions

  • Large capacity of Portege R100 defective battery - LED would not turn

    Hello

    I recently bought a large battery capacity Toshiba for a replacement Dock Slim for my R100, Toshiba #PA3155.

    It was sold like new on eB *, but after installing to mmy R100, the LED for battery 2' wont turn on I tried to find a faulty contact but they look all "new" battery was supplied with stock Connectror coverage, so nothing seems to be broken.

    Maybe it's the high-capacity battery is broken? It takes some time until what he charged to somestate and then it will be recognized by my R100?

    I would be happy to answer, because if the thing is broken, I need to return and do another fight on eBay... :(

    That's right, the second battery attached will not charge until one is not fully charged.

    Would be nice if you check this (just leave your machine a long day to charge two batteries) and give a short answer if kjo was right. :)

    See you soon

  • I need to reinstall Windows XP SP2, but my windows XP installation CD is cracked and would not read.

    Cracked Windows XP SP2 CD

    I need to reinstall Windows XP SP2, but my windows XP installation CD is cracked and would not read. I have the product key and proof of license. Is there a way to download files from microsoft directly support installation using this information.

    Please see:

    http://support.microsoft.com/kb/326246 .

  • printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

    HP printer all-in-one B210a win 7 64 bit.

    no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

    First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

  • Age of Empires III: the Asian Dynasties cannot install the "Art5.bar" of the case and would not proceed beyond this file. I have

    Original title:

    Age of Empires III: the Asian Dynasties

    After a few years with Age of Empires III: the Asian Dynasties uninstalled I recently tried to install it. When the Setup could not install the file "Art5.bar" and would not proceed beyond this file. I tried several facilities with the same result. If it is a zero or a problem with the disc, is there no way, far from buying a new copy, which would allow the installation of The Asian Dynasties or would repair the disk? Is it not possible to force the installation to jump before the installation of the file "Art5.bar" and try to find the file online a patch or another source?

    I found similar questions online and was trying a possible solution, which was to copy files from my drive in another file and try to install from there. Then I discovered that windows can not copy a certain file on the disk, called ' YPack_ ~ 1 ' correctly. The copy process stop, just as the installer of The Asian Dynasties had previously and would not then spent the ' YPack_ ~ 1 ' file. I was also unable to copy the file '00002.tmp', but I was able to jump in front of the copy of the file. I don't know if this file is corrupted and critical for installation, were not able to determine if yes, when you attempt to run Setup from the folder Setup cannot start the installation of The Asian Dynasties without the ' YPack_ ~ 1 ' file. I have not found similar questions online and do not know if this is the issue of the installation of The Asian Dynasties or indicates files corrupted on my drive.

    Hi, I could not also copy the 00002.tmp, but I think it might be due to a cyclic redundancy check indicating a damaged drive.

    Maybe try to download this file from the internet and (after checking that it is the right file) replacing the version on your CD.

  • Google Chrome crashed and would not reopen. That is to say there is a conflict, but will not fix itself.

    problems of incompatibility google chrome.

    I use google chrome. one day, he crashed and would not reopen. I have since then uninstalled/reinstalled several times and it still will not open correctly.  That is to say there is a conflict, but will not fix itself.  What can I do to get chrome back b/c I don't like firefox browser

    No thing is a problem of Windows 7 - self.

    Contact Google support for the browser.  Because it does not 'really' - install I would bet if you tried with another user account 'install' - it might work for this user (on the same machine).

  • Worst ever customer service! Took a month to solve my request for an account that was signed for fraud with my bank details, and would not deliver even a refund of $1 for fraudulent use of the account. If they treat their employees the way cu

    Worst ever customer service! Took a month to solve my request for an account that was signed for fraud with my bank details, and would not deliver even a refund of $1 for fraudulent use of the account. If they treat their employees the way of customer service treats its customers, not surprising that the service is the worst I've ever met.  Bad form Adobe.  What a month subscription pay you? Adobe Community

    If your card has been used fraudulently to subscribe, you should be able to get the charges reversed with your credit card company. Not to defend the whole Adobe Customer Service, but in this case Adobe has no way to tell if it is a fraudulent use.

  • I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer.

    I have an ipod touch that needs to be picked up by itunes. When I plug into a wall outlet, it lights up and told you to connect to itunes, but it not turn on when I plug it into my computer. Or my computer will recognize any device connected to the usb port. I tried another ipod to check the usb ports work and they are. Ive run out of ideas. help please

    Hello

    Check with iPod Support and Forums for more information if necessary.

    -IPod support
    http://www.Apple.com/support/iPod/

    iTunes and iPod Support
    http://www.Apple.com/support/

    Each iPod - iPod help & Technical Support (part 3)
    http://www.EveryiPod.com/iPod-help/index.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • iPhone is blocked and is not turned off of either

    Hello. I was updating my iphone to the latest iOS version 9.3. Everything is going well, and then he started to check the update. A few seconds later, a message box appears saying that iOS 9.3 could not be updated because connectivity issues and the sign of updates to audit showed constantly on the screen. Because of that sign, I was unable to do anyhting on the phone, I asked Siri to turn off wifi because I thought that would help to make the sign to go away, but after having turned off the wifi, there was nothing I could do. Even the iphone is not turning off. Now the phone is locked and I am unable to do anything. Please help me with this and let me know what I would do as soon as possible. Thank you!

    Press the sleep/wake and home buttons and keep them for at least 10 seconds.

    If you are unable to activate your iPhone, iPad or iPod touch after installing iOS 9.3 - Apple Support

  • Satellite C660-2EL off - would not turn back on this time

    I hope this is the right place to put this. I have a Toshiba Satellite C660-2EL and last night it shut down without warning, nothing. He would not go back at all, he just kind of this noise as if it were die a death slow and had the green light etc., but then off back again once, I noticed that my battery had come to lose (which sometimes happens) so I put back and tried again, nothing.

    I also tried with my charger and everything in place, again this time that there is an orange light flashing, no green light and a-type noise that squeaks really horrible. Come on now, this morning, I decided to try it all again and it works? * Anyone know what this could be? *

    I have insurance and I think just take it to them because of this and see what they think, as it's the second time it happened, although the first time, he never turned back, and Toshiba, it had some water damage and was so my fault and I had to send it to the normal setting so it can be fixed.

    Thank you all!

    On this virtual path, it is not easy to discuss these issues. Generally better you can do is to contact the nearest Toshiba service provider, ask for help and try to clarify this with the technicians.

    If you have a valid insurance try to ask for help and get free fixed.

    Sorry, but what else to say about it.

  • L450 blocked to 0.77 GHz processor when it is on battery and can not downgrade the BIOS

    Hello

    It seems that the CPU of my L450 is blocked to 0.77 GHz speed when it is running on battery power and no matter how heavy the load, the CPU speed does not fit on the rise, unless I plug in the AC power cord.

    This makes the laptop a bit useless on the battery when you do something time CPU.

    This seems to be the unusual question, based on the quick searchand possibly related to the BIOS. I would try to downgrade from 1.16-> 1.15 or 1.12, but I always get the error "Failed to secure authentication of Flash", after you run the flash program and rebooted (when flashing the BIOS should start).

    I turned off in the BIOS the option 'Prevention of RollBack Secure' settings, so I guess that's not the question for not having to downshift.

    Does anyone else have this problem (with the speed of the CPU limitation or decommissioning of the BIOS)?

    I tried to change options in plan powers the window, like 'The Maximum processor state', 'Intel CCMP energy efficiency Settings. "

    I am running Windows 10, if any relevant information.

    OK, think about it.

    The fix was to disconnect the battery and the power cord for one minute. After that, the CPU is scaling its speed again normally.

    Good thing that this laptop model has a removable battery, I guess...

    I'd like to, I would have thought this before going through the demotion to 8.1 Windows, since the I suspected it could be a bug with Windows 10 or some of its pilots.

    I think that this problem was caused by my recent update BIOS of 1.12 to 1.16, but it's really just a guess.

  • Pavilion g6 turned off and will not turn back on

    My g6 kept turning off unexpectedly, and now it will not even turn around.  Help, please.

    The fire being orange means that the computer is "charge" of the battery.  If it is always orange and never goes back to white then there is something wrong with the battery because it is not that it is fully charged and the continuous computer to keep it loads or not related that she stopped.  This could be a battery problem or a problem with the computer loading mechanism.  It's probably more with the battery what either.  If you can get the computer to boot with the battery and you can get the HP utility Center to open, you can have it run a test on the battery and give you information about your battery.

  • Satellite A - USB issues and would not start

    It started with my computer (laptop) from freezing. Then my USB mouse leave, make me use this tablet (I hate that seriously), then the computer would not simply start so I removed the battery, the computer starts, and then it froze again, put the battery back in, computer started again. Things continue to go.

    Today, I got the Toshiba (my baby) at Staples (free checking up), they found nothing wrong. Got home, starts very well - the 1st time, I tried to reinstall my USB mouse and quess what - would not start. Out the battery, and here we are.
    Oh and by the way - I would like my rear USB mouse - I said "I hate this tablet.
    Battery has been for about 2 hours now without any problems

    Can anyone HELP?
    Thank you

    What computer Satellite phone do you have?

    Have you tested without USB mouse? Maybe this is causing the problem.

    And have you tried a BIOS update? You can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  • laptops with battery problems and does not turn on

    I get Strait to the point and say that I have 2 laptops that are causing a bit of touble.the the first is hp dv6 4023tx it worked fine one moment connected to food I have remove the power cable and its fine I turn it off leave it for about an hour and it will not power on I had a look at the error codes different and found that the code I get is an error of System Board and I'm not sure what to do about it. the other laptop is a dv3 2002tu and battery decided to die on me and I'm not sure what to do with it either. I download the wizard of battery and it gives me an OK (4) im not sure what that 4 means but it might be useful the dv3 .ps is the computer laptop im using to send these messages and get only on when plugged into an external power source.

    Hello @DBG-spas .

    Welcome to the HP Forums!

    I understand your laptops have feeding problems and the battery.

    If there are system errors Council you will need service on the motherboard. You can contact HP telephone support for options of repair and maintenance at 1-800-474-6836 in North America. For all other regions click here.

    The question of DV3 is a little different. If the battery is not the laptop, but it works very well with the power connected, it could be the battery or on the motherboard connections that are the problem. The only way to be really sure if its in the computer or the battery is to try another battery. The bad news here is that, to try another battery, you have good enough to buy one, that may not solve the problem.

    You can find the battery searching these reference numbers (according to what battery you have):

    Part number of battery 9 cells, 83-Wh-530803-001
    Part number 6-cell, 55-Wh-530802-001 battery
    Part number 6-cell, 47-Wh-530801-001 battery

    It is finally to if you want to make the bet or not, but you can also contact you the HP support by phone for repair on this one as well.

    Sorry for the bad news, but we hope this helps.

  • Custom flash drives still work in XP slows down the computer and does not turn off. No drive letter & tried all solutions online.occassionally ok

    When computer for a while and plug in flash drive usb does not recognize the drive, the computer slows down, does not turn off. Even with all the flash drives I have, ok when computer on just. I tried all the solutions online, nothing helps.

    Looks like you might have some performance issues with the computer rather that readers flash... but first of all, I would like to try to take the flash drives to a friends and ensure that they are working very well... If they are I would look at the performance of the computer and health controls. Heres a guide to improving the performance and general peacekeeping home

Maybe you are looking for