Is a VPN PPTP-Hotpoint?

Similar Questions

• If I update my iOS to 10, it will be hase vpn pptp type?

  If I update my iOS to 10, it will be hase vpn pptp type?

  PPTP is no longer used. Replace your VPN L2TP configuration.

• A connection VPN (PPTP), who worked previously no longer works.

  original title: VPN works not

  PROBLEM:
  
  I'm running Vista 64 Ultimate SP2, with all Microsoft Updates applied.  My original CD is pre - SP1.
  A connection VPN (PPTP), who worked previously no longer works.
  I think that the problem is related to an installation of Virtual PC or iTunes, but I can't confirm either way.
  Unfortuantely, I do not have a restore point dated to before the problem.

  DETAILS OF THE PROBLEM:
  
  When I'm viewing the network drivers in Device Manager, the following drivers displayed an error:

  Miniport Wan (IP)
  Miniport Wan WAN (IPv6)
  Miniport Wan (Network Monitor)
  Miniport WAN (PPPOE)
  Miniport Wan WAN (PPTP)

  The error for each text is: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  The following drivers do NOT display an error:

  Miniport Wan WAN (L2TP)
  Miniport WAN (SSTP)

  SOLUTIONS ALREADY ATTEMPTED:
  
  Uninstalling Virtual PC has not solved the problem.
  Uninstall device drivers and re - install it as described in the following web pages did not help the problem:

  http://www.chicagotech.NET/NetForums/viewtopic.php?p=988&SID=39aeb8e5e43c459
  http://www.howtonetworking.com/Vista/rebuildminiport.htm
  http://www.experts-exchange.com/software/System_Utilities/Remote_Access/VPN/Q_24291900.html

  In general, I am able to uninstall device drivers, but re-plant fails (sometimes reported as successful, sometimes not).

  I have presented a problem report on the failure of resettlement of Microsoft (including the following in the log files), but have received no solution:

  DMIC8E.tmp.log.XML
  LOGC9F.tmp
  netrasa.inf
  Setupapi.app.log
  Setupapi.dev.log

  I noticed that the device (loser) of WAN Miniport (PPTP) lists two files: 'ndistapi.sys' and "raspptp.sys", of which the first is NOT digitally signed, but the second is.  However, the peripheral Miniport WAN (L2TP) (work) lists only one file: "rasl2tp.sys" which is signed digitally.  This brings me to the question if my netrasa.inf installation file is currupted. (?)

  Any help would be greatly appreciated.  I am technically competent and can deal with editing the registry, etc, but need a plan of attack.

  Thank you!

  -Tad Richard

  Hi Tadrichard,

  Thanks for choosing Microsoft answers Forum.

  Is there an error when they try to establish the connection, if so, what is the error?

  Are there errors in the event logs?

  Forward for you help.
  Kind regards
  Support of yama - Microsoft.

• Using of VPN (PPTP) with Microsoft Surface RT

  I use VPN (PPTP) on my iPad for months and can't seem to make it work on Microsoft Surface RT. Someone has managed to make this work? If so, could you share how?

  Hi Oodukoma,

  Since you are facing problems to use VPN (PPTP) with the RT of Microsoft Surface, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Windows network 8

• Not ios10 blocking VPN PPTP connections through personal hotspot?

  I use an iPhone 6 + and was upgraded to ios10, two days ago.

  While I don't have a configuration of the VPN connection on the phone, I connect my computer laptop personal hotspot of the iPhone to use internet and sometimes connect to a VPN.

  Before my upgrade to ios10, my laptop could still connect to the VPN while connected to the hotspot from my iPhone.

  After that I updated to ios10, my laptop does not connect to the VPN I connect to.

  I see reports that Apple has abandoned the use of the connection for PPTP VPN connections on ios10.

  But most of the people having problems seem to be people who connect to their phones directly to the VPN in the iPhone settings.

  In my case, my phone is just acting under the guidance of the internet on my laptop but it seems that it does not obstruct my laptop to connect to a pptp even connection if that should have no impact on the phone itself.

  I went down to ios9 and my laptop can connect again to the VPN.

  But now my Apple Watch does not work with my phone because I improved the watch to os3.

  Any ideas if there is a work around for the connection for pptp connections using the hotspon on ios10?

  Apple mentions alternative - Prepare for the removal of PPTP VPN before you upgraded to iOS 10 and macOS Sierra - Apple Support

• Port of VPN PPTP WRT120N

  I'm trying to connect to the network through Microsoft PPTP VPN on port 1723, however when I add "Of Applications and games" on the router (chosen in the menu drop-down), it shows as port 1720 and is not connecting. If I port manually before 1723 below, it still will not connect. If I add my IP as a DMZ, it connects successfully. I started with the 1.0.04)is firmware and updated 1.0.06 and it still fails with the firmware versions and the built in PPTP definition shows like port 1720. What should I do?

  It seems to be a problem with router is. I had a problem. At home, I have a XP PC and a WRT120N. About the remote location a Draytek 2200E with active VPN server. Sometimes no VPN connection possible. WRT/off voltage switching, then possible once to configure the PPTP protocol. Second time fails. Replacing the WRT120N by an another 2200E Draytek (home side) and now everything is OK. Seems to be a bug in the software of passthough PPTP.

• E3000 resets occasionally wired port when connecting to the VPN PPTP using Windows 7.

  I've had an E3000 for a few months now and a couple of times per week that the router loses wired Ethernet connectivity while PPTP VPN connects via Windows 7. The router does not actually resets itself... but darkens light of wired connection, the computer establishing VPN, and connectivity to the router is lost. Within 30 to 45 seconds, the port becomes active, once more, and to establish the VPN connection. I've not seen this on a wireless connection, but I do not often, which may be why. Similarly, I have not seen this on my Vista or XP wired computers using the Windows VPN client... but then again I can't use them often enough to meet the problem.

  I see this mostly on my Windows 7 (x 64) SP1, it also appeared pre - SP1, development equipped PC IP6 disabled on the PPTP VPN. And I don't see that on the establishment of a connection... once the connection has been made I can be operational for hours (5/6 or more a day) with no issue.

  While this issue causes me all real headaches like this doesn't happen on the connection... I thought someone should know.

  abandoned,

  Gave to your suggestion to try, but did nothing to eliminate the problem. The router was already on the version the most recent but re-flashed in any case. I ran 3 days on an old Windows XP machine connected to a different port on the router, I had 3 days to do work, and I've never had the drop on the VPN port. But this morning back on my Windows 7 machine... the port fell during my first attempt... I then had no problem, the rest of the day. Despite her disconnect and reconnect a PPTP VPN a few times more. Go figure.

  Let's consider this resolved... as I don't want to lose too much everyones time hassling with something that seems to be minor. Thanks for the help!

• How to allow VPN PPTP by ASA access

  Hi guys,.

  I allow VPN clients to internal PPTP server located behind a firewall of ASA and running on a Windows 2 K 8 Server machine.

  I found that the Setup is different on the version of the ASA. I'm under ASA Version 8.2 (5).

  There are many rules in place and keep the. I found a lot of guides is bad because they push the drive to remove the existing rules rather than add new.

  Can you please let me know how? (If possible via ADSM) and if I have to wait the questions when I decide to upgrade my ASA?

  Thank you

  Dario

  You must configure static NAT translation because I believe that the PPTP traffic is incoming from the Internet.

  You must allow PPTP traffic on the external interface: TCP/1723

  You must enable PPTP inspection: inspect pptp

• Roadwarrior VPN PPTP] - domestic distribution

  Hello, I have configured a Cisco 1841 a small hub VPN using PPTP and authenticate users in Active Directory using RADIUS.

  Everything was simple and works very well except one thing, distributing routes for internal networks.

  When the VPN rises in the clients, it is set by default wrong all the traffic in the tunnel, only traffic to the internal network, but also general traffic for the Internet. Is not what is desired so I configured the vpn connection (in windows clients) to ignore the gateway by default inside the tunnel, but when I do that it just does not define any itinerary for a internal networks, making them inaccessible.

  I know that I can then add routes manually... but this isn't something I want all users to do whenever they connect.

  My question is: in Windows Active Directory I set up for my user on the Dial In tab option, to define static routes for that user and added a few routes for my internal networks. Why they are not distributed to clients? They should be distributed? I a bit confused with this because in the Cisco I only configure the server radius for authentication, I find it strange that the same server will be used to distribute more information on customers... as the routing information.

  Anyone have a similar to this vpn cenario Nomad? How do solve you?

  PS: Linux, that I solved it because the VPN client allows me to choose which roads I want to add in this connection automatically, not perfect, but it is a solution. However, under windows, I have no option, and if possible I prefer not to install third-party applications to solve this problem.

  Thank you

  Here is the article from Microsoft for your reference:

  http://TechNet.Microsoft.com/en-us/library/bb878117.aspx

  You can also configure a batch file to configure static routes on your PC (before last question):

  http://www.Cisco.com/en/us/Partner/Tech/tk827/tk369/technologies_q_and_a_item09186a00800946ef.shtml

• PIX501 VPN PPTP: I have to browse the internet side remote via my VPN server

  Hello

  IM using PPTP for remote access to my server VPN, its power remotely connect to LAN, but I did not have Internet access on the remote side is that I need...

  IM using windows PPTP client and he has to select the "use default gateway on remote network": but still does not.

  Could you help me, thanks in advance

  Rolando

  6.3 (5) PIX version
  interface ethernet0 car
  interface ethernet1 100full
  ethernet0 nameif outside security0
  nameif ethernet1 inside the security100
  fixup protocol dns-length maximum 512
  fixup protocol ftp 21
  fixup protocol h323 h225 1720
  fixup protocol h323 ras 1718-1719
  fixup protocol http 80
  fixup protocol rsh 514
  fixup protocol rtsp 554
  fixup protocol sip 5060
  fixup protocol sip udp 5060
  fixup protocol 2000 skinny
  fixup protocol smtp 25
  fixup protocol sqlnet 1521
  fixup protocol tftp 69
  !
  inside_access_in ip access list allow a whole
  Note outside_access_in list of outdoor access
  access-list outside_access_in allow icmp a whole
  inside_outbound_nat0_acl ip access list allow any 192.168.1.200 255.255.255.248
  pager lines 24
  the history of logging alerts
  ICMP allow all outside
  Outside 1500 MTU
  Within 1500 MTU
  IP address outside of *. *. *. * 255.255.255.248
  IP address inside 192.168.1.1 255.255.255.0
  alarm action IP verification of information
  alarm action attack IP audit
  IP pool local remote_users 192.168.1.200 - 192.168.1.205
  !
  PDM logging 100 information
  history of PDM activate
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_outbound_nat0_acl
  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
  Access-group outside_access_in in interface outside
  inside_access_in access to the interface inside group
  Route outside 0.0.0.0 0.0.0.0 *. *. *. *
  Timeout xlate 0:05:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
  Sip timeout - disconnect 0:02:00 prompt Protocol sip-0: 03:00
  Timeout, uauth 0:05:00 absolute
  GANYMEDE + Protocol Ganymede + AAA-server
  AAA-server GANYMEDE + 3 max-failed-attempts
  AAA-server GANYMEDE + deadtime 10
  RADIUS Protocol RADIUS AAA server
  AAA-server RADIUS 3 max-failed-attempts
  AAA-RADIUS deadtime 10 Server
  AAA-server local LOCAL Protocol
  Enable http server
  enable floodguard
  Sysopt connection permit-pptp
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  VPDN PPTP-VPDN-group accept dialin pptp
  VPDN group PPTP-VPDN-GROUP ppp mschap authentication
  VPDN group PPTP-VPDN-GROUP ppp encryption mppe auto
  VPDN group configuration client PPTP-VPDN-GROUP address local remote_users
  VPDN group VPDN GROUP-PPTP client configuration dns 200.57.2.108 200.57.7.61
  VPDN group VPDN GROUP-PPTP pptp echo 60
  VPDN group VPDN GROUP-PPTP client for local authentication
  VPDN username * password *.
  VPDN allow outside
  VPDN allow inside
  dhcpd address 192.168.1.100 - 192.168.1.199 inside
  dhcpd dns 200.57.2.108 200.57.7.61
  dhcpd lease 3600
  dhcpd ping_timeout 750
  dhcpd outside auto_config
  dhcpd allow inside

  The PIX cannot re - route traffic to the Internet because it's a feature supported on version 7.x and higher. You cannot execute code on PIX501 7.x.

  You can send all traffic through the tunnel (for the PIX) and have the PIX route this traffic to a router internal (on the head), then rewritten the PIX to the Internet.

  Federico.

• VPN PPTP settings

  I installed a PPTP VPN connection to my Cisco router, and it works, but not completely. Is it possible that when someone connects they can interrogate our internal DNS server for address resolution? Also when they connect, they can no longer browse the Internet, since the a route statement directs all in the VPN. Is it possible to set up split tunneling?

  Thank you.

  For DNS resolution, use the following commands in the virtual-template int (or whatever int you use):

  PPP ipcp dns x.x.x.x y.y.y.y

  PPP ipcp wins a.a.a.a b.b.b.b

  As you can see, this is going to happen on the DNS and WINS servers to the client, obviously x.x.x.x will be your internal DNS server. You can add y.y.y.y if you have a DNS backup, otherwise do not.

  Regarding the split of tunnelling, there is no concept of split tunneling in the PPP protocol, it's basically all or nothing. You can add a static route to the internal network, pointing to the negotiated IP address, but there is no way of knowing the IP address until the tunnel is built, it is not too easy to use.

  See http://www.cisco.com/warp/customer/707/pptp.shtml#add5 for more details.

• VPN PPTP and PPPOE CLIENT ON PIX 501

  Hello

  Can I create a PPTP VPN and a client connection on a PIX 501 with a client to my ISP PPPOE connection. The PPPOE ip is dynamic and the VPN will be a static IP address. They gave me a username and password for VPN and PPPOE. Him also gave me an ip address for the VPN server.

  Should that happen, it's that the PPPOE should connect to the VPN to work.

  I can only get the PPPOE, but I don't know how to do this with a PPTP VPN set.

  Here is my config:
  
  PIX Version 6.3(3)
  
      interface ethernet0 auto
  
      interface ethernet1 100full
  
      nameif ethernet0 outside security0
  
      nameif ethernet1 inside security100
  
      enable password xxxxxxxx encrypted
  
      passwd xxxxxxx encrypted
  
      hostname neveroff
  
      domain-name neveroff.com
  
      fixup protocol dns maximum-length 512
  
      fixup protocol ftp 21
  
      fixup protocol h323 h225 1720
  
      fixup protocol h323 ras 1718-1719
  
      fixup protocol http 80
  
      fixup protocol rsh 514
  
      fixup protocol rtsp 554
  
      fixup protocol sip 5060
  
      fixup protocol sip udp 5060
  
      fixup protocol skinny 2000
  
      fixup protocol smtp 25
  
      fixup protocol sqlnet 1521
  
      fixup protocol tftp 69
  
      names
  
      access-list incoming permit icmp any any echo-reply
  
      access-list incoming permit icmp any any source-quench
  
      access-list incoming permit icmp any any unreachable
  
      access-list incoming permit icmp any any time-exceeded
  
      pager lines 24
  
      icmp permit any echo outside
  
      icmp permit any unreachable outside
  
      icmp permit any time-exceeded outside
  
      icmp permit any source-quench outside
  
      icmp permit any echo-reply outside
  
      icmp permit any information-reply outside
  
      icmp permit any mask-reply outside
  
      icmp permit any timestamp-reply outside
  
      mtu outside 1500
  
      mtu inside 1500
  
      ip address outside pppoe setroute
  
      ip address inside 192.168.1.1 255.255.255.0
  
      ip audit info action alarm
  
      ip audit attack action alarm
  
      pdm logging informational 100
  
      pdm history enable
  
      arp timeout 14400
  
      global (outside) 1 interface
  
      nat (inside) 1 192.168.1.0 255.255.255.0 0 0
  
      static (inside,outside) tcp interface smtp 192.168.1.201 smtp netmask 255.255.255.255 0 0
  
      access-group incoming in interface outside
  
      timeout xlate 0:05:00
  
      timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
  
      timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
  
      timeout uauth 0:05:00 absolute
  
      aaa-server TACACS+ protocol tacacs+
  
      aaa-server RADIUS protocol radius
  
      aaa-server LOCAL protocol local
  
      http server enable
  
      no snmp-server location
  
      no snmp-server contact
  
      snmp-server community public
  
      no snmp-server enable traps
  
      floodguard enable
  
      telnet timeout 5
  
      ssh 0.0.0.0 0.0.0.0 outside
  
      ssh 0.0.0.0 0.0.0.0 inside
  
      ssh timeout 5
  
      console timeout 0
  
      vpdn group pppoex request dialout pppoe
  
      vpdn group pppoex localname xxxxxxxxx
  
      vpdn group pppoex ppp authentication chap
  
      vpdn username xxxxxxxx password xxxxxxxx
  
      dhcpd address 192.168.1.10-192.168.1.41 inside
  
      dhcpd dns 192.168.1.1 168.210.2.2
  
      dhcpd lease 3600
  
      dhcpd ping_timeout 750
  
      dhcpd auto_config outside
  
      dhcpd enable inside
  
      username neveroff password TEnlGTQMwqamBzMn encrypted privilege 2
  
      terminal width 80
  
      Cryptochecksum:c5bfafa70f21ed55cc1b3df377e110bf
  
      : end
  
      

  Thank you

  Etienne

  Happy to help and please kindly mark the message as answered if you have not more than other questions. Thank you.

• VPN (PPTP) and mobile broadband - help me!

  Hello

  I got an SL500 and I use a card SIM of Fullrate, that works well (although when you press 'activate' in the wwan he said my access provider is not supported? but I can't log in, no problem).

  But then I have to connect to a VPN to my University to be able to use certain software licenses, it works well... for 10 minutes, then the wwan connection is lost and I can't reconnect. Vista repair functions, ipconfig/release/renew nothing works except a restart used.

  Help me! I am really frustrated...

  I've updated yesterday - there was an update of hdspa and I changed the global settings for the without thread is not allowed to turn, when idle, and it seems that helped. have used the high-speed and vpn all day and not a single interruption.

  Nice!

• Remote vpn PPTP access broken when updating to 15.1 (4) M [15.1 (3) T]

  Hello

  I have a Cisco 1812 router that is running 15.1 (3) T and is configured to accept PPTP remote access.

  The config works fine, but I wanted to upgrade to the latest version of M (in fact trying to solve another completely different bug).

  But when I went to 15.1 (4 M), then suddenly the dialin PPTP has stopped working.

  Very well, I can connect and I get an IP address and everything seems fine. Except there is no package flowing. I cannot ping across the PPP link at all. Decommissioning, it still works very well.

  Any ideas?

  See you soon,.

  Sylvain

  If you use Radius MPPE, you might be hitting:

  CSCtq59239    MPPE data packets do not flow if RADIUS new authentic

  who has not yet been resolved. For a workaround, you could disable MPPE if privacy is not a concern, or try to find a combination of work of auth Protocol (MSCHAP, MSCHAPv2 versus) and MPPE key length.

  E.g. MSCHAP MPPE-40 may operate while other combinations are not.

  Or, if possible, use local auth instead of RADIUS.

  What is the question irrelevant with what you were hoping to solve with the upgrade? You have a bug number for her? 15.1 (3) T1 would be a possible solution (I'm not 100% sure but it seems that the MPPE bug was introduced later)?

  HTH

  Herbert

  BTW, if you see the same problem on the 1921 new and have a proof of purchase of a service contract.

  I guarantee this will work, but you can try to open a TAC case by calling TAC and provide a reference (PO/SO) of the purchase.

• R7000 PPTP VPN works not

  I have a windows VPN (PPTP) Server behimd my Nighthawk R7000 router but the router does not allow for VPN passthrough? Any ideas?

  I have port 47 GRE TCP/UDP and TCP 1723/UDP sent to my IP address of the VPN server. Am I missing something? It be a checkbox to enable VPN passthrough but I don't see on the R7000 nighthawk? Its not me to VPN in my network. Help, please. Once again it is for Windows VPN not the customer to Open VPN (that I don't want to use)

  Yes, I have forwarded manually and yes I have chosen pptp vpn in the drop down menu. I managed to solve the problem though! I just removed the pptp vpn service from the drop down and added service pptp again and now everything works fine.