Is this battery status worth upgrade?

Similar Questions

• Battery status values

  Hello:

  I got my Atrix a month ago, I had with 1.26 and I realized that when the phone was not plugged in, the battery status would say 'not charging', but now, after I upgraded to 1.83, I realized it now says "unload" when the phone is disconnected. I tried the API and everything and I discovered that the possible values for this field are:

  Unknown
  Does not charge

  To carry out

  Load

  Full

  But what I didn't want to say these fields, is there a negative sense in the performance, or is it the same as not charging? I worry especially because I get a reboot once a week (I checked the forums and it's somewhat normal, but anyway)

  Please if anyone knows, I would be very grateful if you shared.

  Thank you

  jorgejams

  When your phone is turned on and sitting in standby mode, it will be 'discharge' or using the battery. If it is plugged in it will be "load". If it has connected and fully charged, it will be 'full' and if it is hooked up and loads but not complete, it will 'recharge '. Unknown occurs when the phone cannot determine what it does. I'm not sure "do not load" but I guess you might get this message if the phone cannot be charged.

  Mark

  Support Forums Manager

• Apple still has a spare battery for Macbook late 2008 13 "aluminum unibody? My battery status shows the service battery. I have reset the alert status about 6 months ago, but he will not be reset again. Thinking I need a new battery Apple

  My battery status shows the service battery. I have reset the alert status about 6 months ago, but he will not be reset again. Thinking I need a new battery Apple!

  Batteries are no longer available on the Apple online store but can be at your nearest Apple Retail Store, you must check with your store. A better option is probably buy one yourself and replace it. Buy a quality like this http://eshop.macsales.com/shop/apple_laptop/batteries/MacBook_13_Unibody battery

  Avoid imitations cheap as those who are sold on auction sites.

• IdeaPad Y500 battery status always led ON

  Hi, I have Ideapad Y500. There for 2 months I use it. I keep the charger connected always using 100% charged. The present battery status light on the left side of the base of the laptop is turned on for a few days, even if I unplug the charger from the socket. Why is this happening? Is this due to the excessive load? Help, please...

  Hi KrishnaFT9,

  Welcome to the Community Forums of Lenovo!

  Always on battery indicator indicates that the battery has a sufficient charge to power the computer and when the indicator turns red means that the battery needs to be recharged, it is the new type of indication and it is normal and there is no need to worry.

  Publish us back for other queries.

  Best regards

• Battery status icon

  I lost the battery status icon in my taskbar (right). One that shows the percentage charge etc. How can this be restored on my ThinkPad R500

  If it's something that just happened in your current Windows session, then restarting may well bring back.

  If this isn't the case, then click on start-> all programs-> ThinkVantage-> Power Manager. When Power Manager opens go to the tab options and tick ' display gauge of Power Manager in the task bar.

• I can't the battery status in the job prompt.

  I use Workstation 9.0.2 on a Ubuntu 12.04.2 host a Windows 7 and Ubuntu 12.04.2 comments. It is all running on a ThinkPad X 230. The guests were created when I had version 9.0.0 installed Workstation.

  I check title 'Report battery of guest information' for both hosts and started their. The guest OS do not seem to detect the battery.

  As a note, I have noticed battery reporting does not when Ubuntu eventually removed the path/proc/acpi/battery/BAT0 obsolete in favor of the/sys/class/power_supply/BAT0 way. I just guess that is related and perhaps Workstation leans on the proc file system and not the sys file system.

  Thank you.

  Hi AlanaA,

  Thanks for the detailed post.  It is exactly as you describe: my computer battery status relay functionality needs to be updated to use sysfs on modern Linux hosts.  We have an internal bug filed report to follow up this issue.

  See you soon,.

  --

  Darius

• Does anyone know how to return the icons in the sidebar color safari?  My mac has lost this ability on the upgrade to El Capitan.  Thank you.

  Does anyone know how to get Safari sidebar icons to color?  My mac has lost this ability when I upgraded to El Capitan.  Thank you.

  rmcdga wrote:

  Does anyone know how to get Safari sidebar icons to color?  My mac has lost this ability when I upgraded to El Capitan.  Thank you.

  rmcdga ~.

  Safari sidebar slips into view, move the mouse to the left or by clicking on the icon in the toolbar.

  There are 3 menus through the albums has only 2 3 show any color.  This is part of the new flat design, minimal color (a bit like side bar of the Finder)

  Favorites - No.

  reading list - Yes (if photos)

  subscriptions: Yes

• My Mac has said that I don't have the necessary permissions, (although I repaired permissions and checked that I am an administrator of this computer) for the upgrade - what can you tell me what the problem is? Mac 10.5.8

  My Mac has said that I don't have the necessary permissions, (although I repaired permissions and checked that I am an administrator of this computer) for the upgrade - what can you tell me what the problem is? Mac 10.5.8

  This has happened

  Each time Firefox opened

  I tried to upgrade to version 2.0

  User Agent

  Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_5_8; en - us) AppleWebKit/533.16 (KHTML, like Gecko) Safari/533.16 Version/5.0

  See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
  .....
  If you have Mac OS X 10.5 or newer then follow these steps:

  Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
  Trash the current demand for Firefox to do a clean reinstall.
  Install the new version you downloaded.
  Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

• Try installing CS2, guard asking for upgrade checking. This is not an upgrade, this is a record of the full version?

  Try installing CS2, guard asking for upgrade checking. This is not an upgrade, this is a record of the full version? I had Photoshop 7 on my system but uninstalled because it worked. Bought a copy of CS 2, but it will not be installed. Still looking for an earlier version of Photoshop to upgrade. This is a full version disc?

  Your original drive will not work, read below

  CS2 (or earlier version) software activation server replacement

  NOTE that CS2 will not install on a Mac "modern."

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  When you install the special version of the PPro2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• Questions o/e battery and RAM upgrade for dv6700

  Hello everyone. I have 2 questions regarding my HP laptop (model number: dv6000 on the right corner of the eyelid, dv6920ea at the back of the laptop and HP System Info por displays as dv6700 notebook PC):

  1 recently, I saw the battery life drops SIGNIFICANTLY and check battery HP says its normal and I should replace.

  • Purchase of a laptop battery that supports HP Pavilion dv6700 Entertainment Notebook PC series will be sufficient or should it be specially for my computer model laptop #dv6920ea?
  • What is the difference between a 12 cell and the battery 6 cells? My laptop does support both? What is the best?
  • What is the difference between This battery sold by Amazon and it sold by HP?

  2. I want to increase the RAM of my laptop. Currently its 3 GB (2048 + 1024). I searched memory upward and they say only 1 GB of RAM is available. HP sells RAM directly? Or is there anywhere else where I can buy real from RAM?

  I know that these are very novice questions, so please bear with me.

  Thanks in advance for the help. I look forward to a response.

  Best regards

  Ashraf

  6-cell is a standard battery 12 cell's long battery life running, he executed more time when you're on battery and is slightly larger in size and may protrude from the laptop.

  The difference between HP batteries and other brand, you can be sure to use the highest quality lithium batteries HP others you are not sure of the quality. Amazon announced says it's a real HP battery, so its all too good.

  The battery fits any series HP DV6000 laptop computers.

  Unless you use a 64-bit operating system, it's a waste of money to go to 4 GB.

  http://www.asisupport.com/ts_4GB_memory_info.htm

  Any brand of ram will work, just be sure that the seller guarantees the compatibility of your system model.

• How to hide the bar top iPhone information indicating the battery status, time and coverage?  When running my application this sige appearing

  

  Well, I found a solution. You need these TWO entries in your info.plist file:

  Status bar is initially hidden YES

  Discovers the appearance with controllers status bar ONLY

  That's all!

• MacBook Pro has started to randomly stop when it is on battery since the upgrade to El Capitan

  I have a MacBook Pro (15 inch, early 2011) which works very well on the Mountain Lion for a long time. I finally got round to upgrading to El Capitan last week: directly to 10.11.6. A few days later he just powered down without warning while I was working. He was so very well for a few days, but then made several times in the last 48 hours.

  I am moderately sure it happens only when it is on battery (it did not in the past hours 8 while that plugged). Whenever it happens, that there is no warning and the Mac then fine restarts (manually) - Although the clock resets always in 1970 until he can contact an NTP server. One of the curious side effects is that my PostScript fonts were blank on the screen in Excel for a few reboots yesterday but then OK once again!

  No hardware has changed. Major software change is only El Capitan and possibly an iStat Menus update.

  I have reset PRAM and SMC. I ran the short AHT. I disassembled the machine and clean the fans. they were OK, but the problem seems to occur when the Mac is hot.

  Spotlight and Time Machine sometimes seemed to be struggling for the upgrade, and I also saw rpcsvchost with 100% of a core for a while. The machine feels sometimes slow - but for the last 8 hours, it was very good. The only model that I put in place, is that it seems to occur only on battery; It's even happened then that the Dock (etc.) were loading after logging in after an unexpected shutdown.

  The other thing common is in the newspapers every time:

  Cause of previous stop:-128

  I scanned a number of related posts to aspects of it, but do not look at who blames El Capitan rather than material. Yet, many people reported this kind of problem after the upgrade... Coincidence?

  Any ideas?

  Thank you.

  Cause of previous stop:-128

  A negative stop code generally indicates a hardware failure. Have the Apple to assess your Mac. The fix may be as simple as a spare battery.

  Start here: contact support

• Battery drain after upgrading a 5s to iOS9.2.1

  I have a 5 s, bought in August 2014.  I've had no problems until earlier this week, a few days after the upgrade to iOS 9.2.1.  Now battery drains very quickly from 100% to 60% in normal use half an hour, that is news, email, FaceBook.  Twice the battery dropped instantly from about 60% to 1%.  I have no idea what to do about this.

  My 5s iPhone turns off completely to anything around 30-40% battery, no warning, just a black screen, then a CAP in the icon

• Battery life after upgrade of the El Capitan is very bad

  Since the upgrade to El Capitan, it seems that my battery drains quite quickly.  Here is my EtreCheck report.  Please advise on what I need to do to get back to normal.  Thank you

  EtreCheck version: 2.6.6 (226)

  Report generated on 05/01/16 15:03

  Time 03:14

  Download EtreCheck from http://etrecheck.com

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  MacBook (13 inch, late 2009)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook - model: MacBook6, 1

  1 2.26 GHz Intel Core 2 Duo CPU: 2 strands

  8 GB of RAM expandable

  [Click here for upgrade instructions]

  BANK 0/DIMM0

  OK 4 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 4 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 1286 - SN = W000881YP9X7A

  Video information: (Does that mean?)

  NVIDIA GeForce 9400M - VRAM: 256 MB

  Color LCD 1280 x 800

  Software: (Does that mean?)

  OS X El Capitan 10.11.2 15 c (50) - time since started: about one day

  Disc information: (Does that mean?)

  TOSHIBA MK2555GSXF disk0: (250,06 GB) (rotation)

  EFI (disk0s1) : 210 MB

  Swope MacBook (disk0s2) /: go-go 249,20 (97.27) free

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ-898)

  USB information: (Does that mean?)

  Built-in ISight from Apple Inc..

  Apple Inc. Apple keyboard / Trackpad

  Microsoft microsoft¬ae Nano Transceiver v1.0

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Configuration files: (Does that mean?)

  / etc/sudoers, 1242 but file size expected 2299

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Kernel extensions: (Does that mean?)

  / Library/Application Support/MacKeeper/AntiVirus.app

  net.kromtech.kext.AVKauth [no charge] (2.3.9 - 10.10 SDK) [click for support]

  net.kromtech.kext.Firewall [no charge] (2.3.9 - 10.10 SDK) [click for support]

  / Library/Application Support/Roxio

  [no charge] com.roxio.TDIXController (1.2) [click for support]

  / System/Library/Extensions

  [no charge] com.leapfrog.driver.LfConnectDriver (1.0.1) [click for support]

  [no charge] com.ragingmenace.driver.SideTrack (1.6) [click for support]

  Launch officers: (Does that mean?)

  [loading] com.google.keystone.agent.plist [click to support]

  Launch demons: (Does that mean?)

  [loading] com.adobe.fpsaud.plist [click to support]

  [operation] com.fitbit.galileod.plist [click to support]

  [loading] com.google.keystone.daemon.plist [click to support]

  [loading] com.leapfrog.connect.shell.plist [click to support]

  [operation] com.mackeeper.AntiVirus.plist [click to support]

  [operation] com.mackeeper.MacKeeper.plugin.AntiTheft.daemon.plist [click to support]

  [loading] com.macpaw.CleanMyMac3.Agent.plist [click to support]

  [operation] com.ragingmenace.SideTrack.Daemon.plist [click to support]

  User launch officers: (Does that mean?)

  [operation] com.mackeeper.MacKeeper.Helper.plist [click to support]

  [loading] com.macpaw.CleanMyMac3.Scheduler.plist [click to support]

  Items in user login: (Does that mean?)

  CleanMyMac 3 Menu Application (/ Applications/CleanMyMac 4.app/Contents/MacOS/CleanMyMac 3 Menu.app)

  Fitbit connect Menubar Helper Application (/ Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Helper.app of the menu bar)

  Other applications: (Does that mean?)

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000006.MemoryKeeper

  [ongoing] com.Apple.XPC.launchd.oneshot.0x1000000e.EtreCheck

  [ongoing] com.fitbit.GalileoMenubar.189152

  com.mackeeper.MacKeeper.service.clean [loading]

  [ongoing] com.macpaw.CleanMyMac3.Menu.11232

  net.kromtech.MemoryKeeper.60832 [loading]

  net.kromtech.MemoryKeeper.Launcher [loading]

  Plug-ins Internet: (Does that mean?)

  o1dbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [click for support]

  Unity Web Player: Version: UnityPlayer version 3.4.2f3 - SDK 10.5 [click for support]

  Default browser: Version: 601 - SDK 10.11

  Silverlight: Version: 4.0.50917.0 [click for support]

  FlashPlayer - 10.6: Version: 20.0.0.267 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 20.0.0.267 - 10.6 SDK [click for support]

  googletalkbrowserplugin: Version: 5.41.3.0 - SDK 10.8 [click for support]

  iPhotoPhotocast: Version: 7.0

  Center photo Plugin: Version: Photo Center Plugin 1.1.2.2 [click for support]

  GarminGpsControl: Version: 4.2.0.0 - SDK 10.8 [click for support]

  JavaAppletPlugin: Version: 15.0.1 - 10.11 check the version of the SDK

  User Plug-ins internet: (Does that mean?)

  CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [click to support]

  Safari extensions: (Does that mean?)

  Adblock more

  3rd party preference panes: (Does that mean?)

  Application Enhancer

  Flash Player [click for support]

  SideTrack [click for support]

  Time Machine: (Does that mean?)

  Mobile backups: OFF

  Automatic backup: NON - automatic backup disabled

  Volumes to back up:

  Swope MacBook: Disc size: 249,20 GB disc used: 151,93 GB

  Destinations:

  Backup [Local]

  Total size: 499,76 GB

  Total number of backups: 27

  An older backup: 01/15/13, 23:03

  Last backup: 12/19/15, 03:12

  Size of backup drive: adequate

  Backup size GB 499,76 > (disc 151,93 GB X 3)

  Top of page process CPU: (Does that mean?)

  6% WindowServer

  kernel_task 2%

  0% fontd

  0% CleanMyMac 3 Menu

  0% MemoryKeeper

  Top of page process of memory: (Does that mean?)

  670 MB kernel_task

  442 MB softwareupdated

  Safari of 328 MB

  311 MB AntiVirus

  213 MB com.apple.WebKit.WebContent

  Virtual memory information: (Does that mean?)

  439 MB of free RAM

  7.82 GB used RAM (3.70 GB being cached)

  Used Swap 0 B

  Diagnostic information: (Does that mean?)

  4 January 2016, 18:49:41 self-test - spent

  If you read the report you notice there is nothing on the battery. Do not post these reports unless you have been asked to do or have a problem identified in the report for which you need assistance.

  Your battery information is reported in the power section of the information system located in your Utilities folder. Monitor user activity to see if you can identify any process consuming a lot of time processor.

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Reinstall OS X or do run these items:

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  HD recovery start: restart the computer and after the buzzer, press on and press and hold the

  COMMAND and R keys until it appears the Utilities menu screen.

  3 fix the hard disk and permissions: select startup drive in the Utilities menu utility. Fix the hard drive and the permissions as follows.

      When the recovery menu appears, select disk utility and press the continue button. After loading disk utility select it

      back from Macintosh HD entry of the list on the left.  Click first aid button in the toolbar. Wait for the operation

      ends, then quit disk utility and back to the main menu.

  4 reinstall OS X: restart from HD recovery Select reinstall OS X from the Utilities menu, then click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than wireless.

  
  

• How to get information on battery (status)?

  Hi all

  I want to extract the battery information (status IE how much battery is left).

  How can I get the information of the battery?

  Take a look at this example. Battery information is displayed in the example.

  http://www.jonathanhfisher.co.UK/B2/?p=19code

  Concerning

  Bika