Issue networks intra VPN
First of all, it seems to me that if your DSL modem is a router, also. You run two routers to a string. This isn't really a good idea. He usually makes things more complicated.
I would say one of these two options in this case:
1. turn the mode DSL modem. In this mode, it functions as a normal modem, i.e. This disables the router to the DSL modem. Then configure the WRT to connect to your ISP (probably via PPPoE for which you need the user name and password).
2. let the ADSL modem in router mode. Use the WRT as an access point. Basically, turn on the WRT DHCP server and connect it to a LAN port instead of the internet port. Assign the WRT an IP address in your router DSL, LAN, for example 192.168.0.2, but make sure that the DSL modem is not using this IP address
I would recommend 1.
In addition, the network LAN IP on both sides must be different. If your desktop is running 192.168.1.0/255.255.255.0 you cannot run your LAN on the same network. Routing would be impossible because the computer cannot determine if an address 192.168.1.100 belongs to your network or connected network.
Tags: Linksys Routers
Similar Questions
-
Network Concentrator VPN access.
We have a 3000 Concentrator and is configured with a remote vpn on it. All inside network is allowed once a connceted to the vpn user. It is quite behind firewalls. I can access an external IP.
But I can't log in to the vpn from the inside network. I can ping the public interface; but when I try to log in from the client, the server report displays no records to my IP.
Why can't I connect from the inside?
Thank you
= Internal network = Concentrator VPN = FW = off-grid
Why try you to VPN from the inside? The purpose of the VPN is to encrypt the traffic between your PC over the internet to the VPN concentrator, once traffic arrives to your VPN concentrator, it is decrypted, and he'll be in the clear to your internal network.
So, what's the purpose of attempting to connect from the network Cabinet?
The reason why it does not work is because of the delivery. You are on the internal network, while traffic will exit to the firewall and return by the same firewall to connect to the public interface of the VPN concentrator, which is why it does not work and if the goal is access to the internal network, you are already inside the network which complicates things as your ip pool must then be routed to the inside.
Hope that makes sense.
-
Access to a remote network through VPN remote access
Hello
I'm having a problem with users who access VPN from home. We currently have 3 offices facility, as shown below. When I VPN in the Philadelphia office, I am unable to access the resources of Connecticut offices or North Carolina.
The VPN subnet is 192.168.10.0. Inside the office of the PA, I have no problem with NC or CT. I have to add a static route from the Pennsylvania Treasury and NC? If so, could you give me a hand with the correct syntax?
Office <-----------IPSecVPN---------->Office <------------IPSecVPN------------->Office of Connecticut from Pennsylvania, North Carolina
192.168.5.0 192.168.1.0 192.168.2.0
Hello
Yes, basically the ASA accommodation the customer VPN service in this case well enough is the same configuration related to two sites with the exception of course which is obvious
- Networks/subnets
- Different ACL for each VPN L2L
Although naturally the problem for me is the WRVS4400N configuration.
Basically, you do the same things on this unit than the other remote site.
You add the VPN pool as another remote network for VPN L2L configurations. You also confirm that there is operation NAT0 for this network also. I don't know I can help you there as I do not know the device.
Can you please mark it as answered and evaluate other useful answers
Naturally ask for more and I'll try to help you if I can
-Jouni
-
Routing issue of Cisco VPN Client ASA
Hi, I use a Barracuda NG for firewalls and I would use a Cisco ASA 5505 for VPN Client connections. But I have the problem that I can't get a connection to the VPN PC connected to the internal network. But I can reach the VPN connected PC from the inside. Here is a diagram of my network:
Here the IP Configuration and the routing of the Barracuda firewall table:
I have a route on the Barracuda NG to the 10.10.10.0/24 network VPN Client on eth0.
The 192.168.1.0/24 LAN I ping the Client comes with Client VPN 10.10.10.11 as it should. But I can't ping or access network resources in the local network for AnyConnected customer's PC that connected through the VPN.
Here is the config Cisco ASA:
: Saved : : Hardware: ASA5505, 512 MB RAM, CPU Geode 500 MHz : ASA Version 9.2(2) ! hostname leela names ip local pool VPN-Pool 10.10.10.10-10.10.10.200 mask 255.255.255.0 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 switchport access vlan 5 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.250 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp ! interface Vlan5 nameif dmz security-level 50 ip address 172.16.0.250 255.255.255.0 ! ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server 192.168.1.10 same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network obj_any subnet 0.0.0.0 0.0.0.0 object network VPN-Pool subnet 10.10.10.0 255.255.255.0 description VPN-Pool object network NETWORK_OBJ_10.10.10.0_24 subnet 10.10.10.0 255.255.255.0 access-list inside_access_in extended permit ip any any access-list inside_access_in extended permit ip object VPN-Pool any access-list dmz_access_in extended permit ip any any access-list global_access extended permit ip any any access-list outside_access_in extended permit ip any any pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 no failover icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 no arp permit-nonconnected nat (inside,dmz) source static any any destination static NETWORK_OBJ_10.10.10.0_24 NETWORK_OBJ_10.10.10.0_24 no-proxy-arp route-lookup inactive access-group inside_access_in in interface inside access-group outside_access_in in interface outside access-group dmz_access_in in interface dmz access-group global_access global route dmz 0.0.0.0 0.0.0.0 172.16.0.254 1 route inside 0.0.0.0 0.0.0.0 192.168.1.254 tunneled timeout xlate 3:00:00 timeout pat-xlate 0:00:30 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy server-type microsoft user-identity default-domain LOCAL aaa authentication enable console LDAP_SRV_GRP LOCAL aaa authentication http console LDAP_SRV_GRP LOCAL aaa authentication ssh console LDAP_SRV_GRP LOCAL aaa authentication serial console LOCAL http server enable 444 http 192.168.1.0 255.255.255.0 inside snmp-server location Vienna crypto ipsec ikev2 ipsec-proposal DES protocol esp encryption des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal 3DES protocol esp encryption 3des protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES protocol esp encryption aes protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES192 protocol esp encryption aes-192 protocol esp integrity sha-1 md5 crypto ipsec ikev2 ipsec-proposal AES256 protocol esp encryption aes-256 protocol esp integrity sha-1 md5 crypto ipsec security-association pmtu-aging infinite crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev2 ipsec-proposal AES256 AES192 AES 3DES DES crypto map inside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map inside_map interface inside crypto map dmz_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map dmz_map interface dmz crypto ca trustpoint ASDM_TrustPoint0 enrollment self subject-name CN=leela proxy-ldc-issuer crl configure crypto ca trustpoint ASDM_TrustPoint1 enrollment terminal crl configure crypto ca trustpool policy crypto ca certificate chain ASDM_TrustPoint0 quit crypto ikev2 policy 1 encryption aes-256 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 10 encryption aes-192 integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 20 encryption aes integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 30 encryption 3des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 policy 40 encryption des integrity sha group 5 2 prf sha lifetime seconds 86400 crypto ikev2 enable dmz client-services port 443 crypto ikev2 remote-access trustpoint ASDM_TrustPoint0 telnet timeout 5 no ssh stricthostkeycheck ssh 192.168.1.0 255.255.255.0 inside ssh timeout 30 ssh key-exchange group dh-group1-sha1 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.254-192.168.1.254 inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept dynamic-filter updater-client enable dynamic-filter use-database ntp server 192.168.1.10 source inside ssl trust-point ASDM_TrustPoint0 dmz ssl trust-point ASDM_TrustPoint0 inside webvpn enable dmz no anyconnect-essentials anyconnect image disk0:/anyconnect-macosx-i386-3.1.05170-k9.pkg 1 anyconnect image disk0:/anyconnect-win-3.1.05170-k9.pkg 2 anyconnect image disk0:/anyconnect-linux-3.1.05170-k9.pkg 3 anyconnect image disk0:/anyconnect-linux-64-3.1.05170-k9.pkg 4 anyconnect profiles AnyConnect_client_profile disk0:/AnyConnect_client_profile.xml anyconnect enable tunnel-group-list enable group-policy DfltGrpPolicy attributes default-domain value group-policy GroupPolicy_AnyConnect internal group-policy GroupPolicy_AnyConnect attributes wins-server none dns-server value 192.168.1.10 vpn-tunnel-protocol ikev2 ssl-client webvpn anyconnect profiles value AnyConnect_client_profile type user group-policy portal internal group-policy portal attributes vpn-tunnel-protocol ssl-clientless webvpn url-list none username tunnel-group AnyConnect type remote-access tunnel-group AnyConnect general-attributes address-pool VPN-Pool authentication-server-group LDAP_SRV_GRP default-group-policy GroupPolicy_AnyConnect tunnel-group AnyConnect webvpn-attributes group-alias AnyConnect enable tunnel-group Portal type remote-access tunnel-group Portal general-attributes authentication-server-group LDAP_SRV_GRP default-group-policy portal tunnel-group Portal webvpn-attributes group-alias portal enable! ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 ! prompt hostname context no call-home reporting anonymous hpm topN enable : end no asdm history enable
Can someone please help me solve this problem?
When I tried to solve this I didn't choose which interface the Packet Tracer?
The interface inside or DMZ interface? Inside, he says it will not work with the dmz but the error did not help me
Anyone here knows why it does not work?
Hello
Inside LAN is directly connected to the right firewall VPN... then I don't think you have to have the itinerary tunnele... can you try to remove the road tunnel mode and check.
entrance to the road that is static to achieve 10.10.10.11 as its display is correct...
Route by tunnel watch also with 255 administrative distance. I've never used that in my scenarios... lets see...
Concerning
Knockaert
-
Cannot print to a network via vpn printer
Installed an EnGenius ESR750H router and configure the L2TP VPN server and Win 7 SP1 VPN client. The client connects and implements the VPN.
I can access the drives mapped to WHS v1 (Windows Home Server) and NAS (Network attached storage() and I can access the NAS login screen.
I can't access screen for the old DLink DIR-655 Router now used as a WAP only [wireless access point] connection.
I can't print the two printers on network at the office. LaserJets HP4000 & HP4050 with SNMP disabled in the configuration of printer Win7 - if on, they show offline.
And I can't RDC (Remote Desktop connection) the ESM.
A computer on the LAN Office can do anything, so everything works.
Some time back, I have all work by the VPN ESR750H - all this - and I was so happy to finally access. At that time there I had not yet removed on the WHS VPN configuration.
Then the next day, a fool to UNRWA [the boss] decided to move things on a network segment and everything, including internet access, went to-well, you know where. During the frenetic fray next I took the VPN of the WHS, but left the remote control to connect to. More I have him help locate the bad wiring and bad switch causing the problem.
I could not even get it all back to what I had it one evening. There must be something stupid.
The DRC to the WHS says the server error is not on, not available on the network, or is not remote connect lit, but the boss can rdc to the MSS on the local network.
Printers and the DIR-655 all come with the same message of troubleshooting when I go to IP addresses through the browser with the connected VPN.
(device) is detected and online but does not - does not not to connections on port 80, possibly firewall or do security policy issues - no problems with the firewall on my computer.
I tried port forwarding 80 printing - no joy.
Thanks in advance.
Bob
Hello Rafisher,
Thanks for posting the question on the Microsoft Community.
The question you posted would be better suited in TechNet community support. I suggest you to check with TechNet support to solve the problem.
http://social.technet.Microsoft.com/forums/en-us/newThread
I hope that helps you find the solution for your problem. If you have other problems with Windows in the future, please post in the Windows community. We would be happy to help you.
-
Cannot access remote network by VPN Site to Site ASA
Hello everyone
First of all I must say that I have configured the VPN site-to site a million times before. Stuck with it. First of all I can't ping outside the interface of my ASA remote. Secondly, VPN is in place, but no connectivity between local networks
ASA local:
hostname gyd - asa
domain bct.az
activate the encrypted password of XeY1QWHKPK75Y48j
XeY1QWHKPK75Y48j encrypted passwd
names of
DNS-guard
!
interface GigabitEthernet0/0
Shutdown
nameif vpnswc
security-level 0
IP 10.254.17.41 255.255.255.248
!
interface GigabitEthernet0/1
Vpn-turan-Baku description
nameif outside Baku
security-level 0
IP 10.254.17.9 255.255.255.248
!
interface GigabitEthernet0/2
Vpn-ganja description
nameif outside-Ganja
security-level 0
IP 10.254.17.17 255.255.255.248
!
interface GigabitEthernet0/2.30
Description remote access
VLAN 30
nameif remote access
security-level 0
IP 85.*. *. * 255.255.255.0
!
interface GigabitEthernet0/3
Description BCT_Inside
nameif inside-Bct
security-level 100
IP 10.40.50.65 255.255.255.252
!
interface Management0/0
nameif management
security-level 100
IP 192.168.251.1 255.255.255.0
management only
!
boot system Disk0: / asa823 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
name-server 192.168.1.3
domain bct.az
permit same-security-traffic intra-interface
object-group network obj - 192.168.121.0
object-group network obj - 10.40.60.0
object-group network obj - 10.40.50.0
object-group network obj - 192.168.0.0
object-group network obj - 172.26.0.0
object-group network obj - 10.254.17.0
object-group network obj - 192.168.122.0
object-group service obj-tcp-eq-22
object-group network obj - 10.254.17.18
object-group network obj - 10.254.17.10
object-group network obj - 10.254.17.26
access-list 110 scope ip allow a whole
NAT list extended access permit tcp any host 10.254.17.10 eq ssh
NAT list extended access permit tcp any host 10.254.17.26 eq ssh
access-list extended ip allowed any one sheep
icmp_inside list extended access permit icmp any one
icmp_inside of access allowed any ip an extended list
access list nat-ganja extended permit tcp any host 10.254.17.18 eq ssh
RDP list extended access permit tcp any host 192.168.45.3 eq 3389
rdp extended permitted any one ip access list
sheep-vpn access-list extended permits all ip 192.168.121.0 255.255.255.0
NAT-vpn-internet access-list extended ip 192.168.121.0 allow 255.255.255.0 any
NAT-vpn-internet access-list extended ip 172.26.0.0 allow 255.255.255.0 any
NAT-vpn-internet access-list extended ip 192.168.122.0 allow 255.255.255.0 any
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.60.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.40.50.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 192.168.0.0 255.255.0.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 172.26.0.0 255.255.255.0
access-list sheep-vpn-city scope ip 192.168.121.0 allow 255.255.255.0 10.254.17.0 255.255.255.0
GHC-ganja-internet access-list extended ip 192.168.45.0 allow 255.255.255.0 any
Standard access list Split_Tunnel_List allow 192.168.16.0 255.255.255.0
azans 192.168.69.0 ip extended access-list allow 255.255.255.0 any
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.121.0 255.255.255.0
permit inside_nat0_outbound to access extended list ip 192.168.0.0 255.255.0.0 192.168.80.0 255.255.255.0
pager lines 24
Enable logging
emblem of logging
recording of debug console
recording of debug trap
asdm of logging of information
Interior-Bct 192.168.1.27 host connection
flow-export destination inside-Bct 192.168.1.27 9996
vpnswc MTU 1500
outside Baku MTU 1500
outside-Ganja MTU 1500
MTU 1500 remote access
Interior-Bct MTU 1500
management of MTU 1500
IP local pool raccess 192.168.121.60 - 192.168.121.120 mask 255.255.255.0
IP local pool ssl 192.168.121.130 - 192.168.121.200 mask 255.255.255.0
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow any outside Baku
ICMP allow access remotely
ICMP allow any interior-Bct
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
global (outside-Baku) 1 interface
global (outside-Ganja) interface 2
3 overall (RAS) interface
azans access-list NAT 3 (outside-Ganja)
NAT (remote access) 0 access-list sheep-vpn-city
NAT 3 list nat-vpn-internet access (remote access)
NAT (inside-Bct) 0-list of access inside_nat0_outbound
NAT (inside-Bct) 2-nat-ganja access list
NAT (inside-Bct) 1 access list nat
Access-group rdp on interface outside-Ganja
!
Router eigrp 2008
No Auto-resume
neighbor 10.254.17.10 interface outside Baku
neighbor 10.40.50.66 Interior-Bct interface
Network 10.40.50.64 255.255.255.252
Network 10.250.25.0 255.255.255.0
Network 10.254.17.8 255.255.255.248
Network 10.254.17.16 255.255.255.248
redistribute static
!
Access remote 0.0.0.0 0.0.0.0 85.*. *. * 1
Outside-Baku route 10.0.11.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.33.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.150.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 10.0.170.0 255.255.255.0 10.254.17.10 1
Route outside Baku 10.254.17.24 255.255.255.248 10.254.17.10 1
Route outside Baku 10.254.17.32 255.255.255.248 10.254.17.10 1
Route outside Baku 192.1.1.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.27.0 255.255.255.0 10.254.17.10 1
Outside-Baku route 192.168.39.0 255.255.255.0 10.254.17.10 1
Route outside-Ganja 192.168.45.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.66.0 255.255.255.0 10.254.17.18 1
Route outside-Ganja 192.168.69.0 255.255.255.0 10.254.17.18 1
Outside-Baku route 192.168.80.0 255.255.255.0 10.254.17.11 1
Access remote 192.168.121.0 255.255.255.0 85.132.43.1 1
Route outside-Ganja 192.168.184.0 255.255.255.0 10.254.17.18 1
Route outside Baku 192.168.208.16 255.255.255.240 10.254.17.10 1
Route outside-Ganja 192.168.208.112 255.255.255.240 10.254.17.18 1
Route inside-Bct 192.168.254.0 255.255.255.0 10.40.50.66 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
AAA-server protocol Ganymede GANYMEDE +.
AAA-server GANYMEDE (Interior-Bct) 192.168.1.8
key *.
AAA-server GANYMEDE (Interior-Bct) 192.168.22.46
key *.
RADIUS protocol AAA-server TACACS1
AAA-server TACACS1 (Interior-Bct) host 192.168.1.8
key *.
AAA-server TACACS1 (Interior-Bct) host 192.168.22.46
key *.
authentication AAA ssh console LOCAL GANYMEDE
Console to enable AAA authentication RADIUS LOCAL
Console Telnet AAA authentication RADIUS LOCAL
AAA accounting ssh console GANYMEDE
Console Telnet accounting AAA GANYMEDE
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.1.0 255.255.255.0 Interior-Bct
http 192.168.139.0 255.255.255.0 Interior-Bct
http 192.168.0.0 255.255.255.0 Interior-Bct
Survey community SNMP-server host inside-Bct 192.168.1.27
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
Crypto ipsec transform-set esp-3des esp-md5-hmac raccess
Crypto ipsec transform-set esp-3des esp-sha-hmac vpnclienttrans
Crypto ipsec transform-set vpnclienttrans transport mode
life crypto ipsec security association seconds 2147483646
Crypto ipsec kilobytes of life security-association 2147483646
raccess 1 set transform-set vpnclienttrans crypto dyn1 dynamic-map
correspondence address card crypto mymap 10 110
card crypto mymap 10 peers set 10.254.17.10
card crypto mymap 10 transform-set RIGHT
correspondence address card crypto mymap 20 110
card crypto mymap 20 peers set 10.254.17.11
mymap 20 transform-set myset2 crypto card
card crypto mymap interface outside Baku
correspondence address card crypto ganja 10 110
10 ganja crypto map peer set 10.254.17.18
card crypto ganja 10 transform-set RIGHT
card crypto interface outside-Ganja ganja
correspondence address card crypto vpntest 20 110
peer set card crypto vpntest 20 10.250.25.1
newset vpntest 20 transform-set card crypto
card crypto vpntest interface vpnswc
vpnclientmap 30 card crypto ipsec-isakmp dynamic dyn1
card crypto interface for remote access vpnclientmap
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = gyd - asa .az .bct
sslvpnkeypair key pair
Configure CRL
map of crypto DefaultCertificateMap 10 ca certificatecrypto isakmp identity address
ISAKMP crypto enable vpnswc
ISAKMP crypto enable outside-Baku
ISAKMP crypto enable outside-Ganja
crypto ISAKMP enable remote access
ISAKMP crypto enable Interior-Bct
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 30
No vpn-addr-assign aaa
Telnet timeout 5
SSH 192.168.0.0 255.255.255.0 Interior-Bct
SSH timeout 35
Console timeout 0
priority queue outside Baku
queue-limit 2046
TX-ring-limit 254
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Server NTP 192.168.1.3
SSL encryption, 3des-sha1 rc4 - md5 aes128-sha1 sha1-aes256
SSL-trust point ASDM_TrustPoint0 to vpnlb-ip remote access
SSL-trust ASDM_TrustPoint0 remote access point
WebVPN
turn on remote access
SVC disk0:/anyconnect-win-2.4.1012-k9.pkg 1 image
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
internal group ssl policy
attributes of group ssl policy
banner welcome to SW value
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
group-lock value SSL
WebVPN
value of the SPS URL-list
internal vpn group policy
attributes of vpn group policy
value of DNS-server 192.168.1.3
Protocol-tunnel-VPN IPSec l2tp ipsec
disable the PFS
BCT.AZ value by default-field
ssl VPN-group-strategy
WebVPN
value of the SPS URL-list
IPSec-attributes tunnel-group DefaultL2LGroup
ISAKMP retry threshold 20 keepalive 5
attributes global-tunnel-group DefaultRAGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
IPSec-attributes tunnel-group DefaultWEBVPNGroup
ISAKMP retry threshold 20 keepalive 5
tunnel-group 10.254.17.10 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.10
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
type SSL tunnel-group remote access
attributes global-group-tunnel SSL
ssl address pool
Authentication (remote access) LOCAL servers group
Group Policy - by default-ssl
certificate-use-set-name username
Group-tunnel SSL webvpn-attributes
enable SSL group-alias
Group-url https://85. *. *. * / activate
tunnel-group 10.254.17.18 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.18
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
tunnel-group 10.254.17.11 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.11
pre-shared key *.
ISAKMP retry threshold 20 keepalive 5
type tunnel-group DefaultSWITGroup remote access
attributes global-tunnel-group DefaultSWITGroup
raccess address pool
Group-RADIUS authentication server
Group Policy - by default-vpn
IPSec-attributes tunnel-group DefaultSWITGroup
pre-shared key *.
!
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect sunrpc
inspect xdmcp
inspect the netbios
Review the ip options
class flow_export_cl
flow-export-type of event all the destination 192.168.1.27
class class by default
flow-export-type of event all the destination 192.168.1.27
Policy-map Voicepolicy
class voice
priority
The class data
police release 80000000
!
global service-policy global_policy
service-policy interface outside Baku Voicepolicy
context of prompt hostnameCryptochecksum:4f35f975ba7a0c11f7f46dfd541d266f
: end
GYD - asa #.ASA remote:
ASA Version 8.2 (3)
!
ciscoasa hostname
activate the encrypted password of XeY1QWHKPK75Y48j
2KFQnbNIdI.2KYOU encrypted passwd
names of
DNS-guard
!
interface Ethernet0/0
nameif inside
security-level 100
IP 192.168.80.14 255.255.255.0
!
interface Ethernet0/1
nameif outside
security-level 0
IP 10.254.17.11 255.255.255.248
!
interface Ethernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
nameif management
security-level 100
no ip address
management only
!
boot system Disk0: / asa823 - k8.bin
passive FTP mode
access-list 110 scope ip allow a whole
192.168.80.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.0.0 255.255.0.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
management of MTU 1500
Within 1500 MTU
no failover
ICMP unreachable rate-limit 1 burst-size 1
ICMP allow all outside
ICMP allow any inside
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
NAT (inside) 0 access-list sheep
Route outside 0.0.0.0 0.0.0.0 10.254.17.9 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.1.0 255.255.255.0 management
http 192.168.80.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
Crypto ipsec transform-set newset aes - esp esp-md5-hmac
Crypto ipsec transform-set esp-3des esp-sha-hmac myset2
life crypto ipsec security association seconds 2147483646
Crypto ipsec kilobytes of life security-association 2147483646
correspondence address card crypto mymap 10 110
card crypto mymap 10 peers set 10.254.17.9
mymap 10 transform-set myset2 crypto card
mymap outside crypto map interface
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 20
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
preshared authentication
aes encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPNtunnel-group 10.254.17.9 type ipsec-l2l
IPSec-attributes tunnel-group 10.254.17.9
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns migrated_dns_map_1
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostnameCryptochecksum:1c1ac60e2fb84f65269d15d53f27c21b
: end
ciscoasa # $Still, I can't ping ASA remote outside from outside of the Local interface. And there is no connectivity between the 192.168.80.0 distance and local don't say 192.168.1.0. I have run out of ideas
Would appreciate any help. Thank you in advance...
If the tunnel is up (phase 1), but no traffic passing the best test is the following:
Add order management-access to the Interior , and then try to PING the intellectual property inside ASA counterpart.
inside x.x.x.x ping --> x.x.x.x is the IP of the ASA peer inside
The test above shows if the traffic passes through the tunnel (check encrypted/decrypted packets of sh cry ips its).
Test on both directions.
Please post the results.
Federico.
-
ESXi hosts SBS 2011, clients lose network via VPN
Greetings,
We have an ESXi Server (in a lab environment) who perform a SBS 2011 and a Windows 2003 (Terminal Server).
We have two locations, connected via a VPN IPSec (2 boxes of ClearOS).
The ESXi host is located in building r. customers in the construction of an experience no problem at all.
Customers in the building B often lose connectivity to network share. We also failed when copying data. Do not forget that the servers are located in the building and issues affecting only users in the B building.
We noticed the event ID 2012 on the VM SBS 2011 event viewer.
The two buildings are connected to a cable broadband 10 mb / 1 mb ISP.
NOD32 Antivirus is installed on the two virtual machines
Any help would be appreciated!
Thank you
Fred9777
Hello
There are a few things to look out for more such links. The following steps were made on W2K and W2K3, so that they are still applicable for you.
(1) is the VPN capable to manage the packet being sent by site B MTU size, sometimes the MTU on VPN size must be less than the default value of 1500 set LAN. You can check this scathing your server with a command like
ping f-l 1500
If you get a message like "packet needs to be fragmented but DF parameter.
You will need to reduce the size of the MTU TCP/IP in the client registry. Try to ping the server with a size of 500 bytes and see how it goes.
(2) setting the server TCP/IP stack
In the registry HKLM \SYSTEM\CurrentControlSet\Services\Tcpip\Parameters, create or modify value DWORD of TcpMaxDataRetransmissions. By default, it is set to 5, but I recommend double this value to 10. The TcpMaxDataRetransmissions value is the number of retransmissions of TCP of a data segment without acknowledgement of receipt on an existing connection. TCP retransmits data segments until they are acknowledged or until the expiry of this value. Basically, when a client does not meet a package from the server, the server will attempt to retransmit the packet until TcpMaxDataRetransmissions many times. By increasing this value, you give the customer more time to answer on the server, which will help improve the flaky connections or connections with latency or higher than normal packet loss.
HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveInterval and HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\KeepAliveTime.
Both entered DWORD.KeepAliveInterval determines the interval between retransmissions keep until a response is received. If a response is received, the delay until the next keep alive transmission is again controlled by the value of KeepAliveTime.The connection will be broken once the number of retransmissions specified by TcpMaxDataRetransmissions is remained. KeepAliveInterval is set by default at 1000, which is one second.KeepAliveTime controls how many times TCP attempts to verify that an idle connection is still intact by sending a living package of the Dungeon. If the remote system is still reachable and running, he will acknowledge receipt of the living transmission to keep. KeepAliveTime is set by default to 7 200 000, or 2 hours.I hope this helps.
-
Cant' network with VPN card readers
Hello!
Here at my company in recent weeks, that some problems came with somes user not being able to access the network through the VPN connection drives.
If I delete all network drives and try to map them in the normal way (Tools > map network drive) I get a "extended error has occurred", but if I force using the "connect using a different user name" and putting the user domain\username and password of the person using the computer, it maps the network drive without problem... until the next reboot.
So, I repeat it, everywhere.
There is no password stored in the password manager Windows.
I remove from the registry, the keys to MapPointings2.Can someone help me?
They are all WinXp.
Thank you!
Hello
The question you have posted is related to Technet and would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads -
C6280, win7 cannot print via active network with VPN
Hi, I have 2 PCs, one Vista, one on Win7. With Vista, I can print over the network.
Also, via USB on the win7 PC I can print.
But I can't print via active on the Win7 with VPN network. Without VPN, it works.
I had several problems with the installation of the SW. Finally it worked (I think I had to turn my VPN connection)
It recognizes the printer, the State says: ready, but when I print, I get an error after a while.
When I stop the VPN, I can print.
I tried to load the patch for Win 7 (recommended on HP circuit (printer disappears), but what it says that I don't have the SW right?)
any idea?
Hi ReneH,
I am pleased to hear that the problem has been resolved. Have a wonderful day.
-
Add the existing network of VPN l2l
I have properly configured VPN l2l between our main site and 2 offices. Now, I would like to allow additional networks on the main site to access the branch sites. Here the doc of Cisco (http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00807fad90.shtml) presents a method to do this by adding an additional interface. Is it possible to do without the addition of an interface?
Here are the relevant config on the main site ASA (8,0) and one of the remote PIX (7.0):
=========================
ASA (main site)
access extensive list ip 172.16.0.0 outside_1_cryptomap allow 255.255.255.0 172.16.29.0 255.255.255.0
access extensive list ip 172.16.1.0 outside_1_cryptomap allow 255.255.255.0 172.16.29.0 255.255.255.0
card crypto outside_map 1 match address outside_1_cryptomap
card crypto outside_map 1 set 24.97.x.x counterpart
map outside_map 1 set of transformation-ESP-3DES-MD5 crypto
=========================
PIX (remote site)
access extensive list ip 172.16.29.0 outside_cryptomap_20_2 allow 255.255.255.0 172.16.0.0 255.255.255.0
access extensive list ip 172.16.29.0 outside_cryptomap_20_2 allow 255.255.255.0 172.16.1.0 255.255.255.0
card crypto outside_map 20 match address outside_cryptomap_20_2
card crypto outside_map 20 peers set 204.14.x.x
outside_map card crypto 20 the transform-set ESP-3DES-MD5 value
Just add valuable traffic to your access lists. New = 172.16.2.0/24 network
ASA (main site)
outside_1_cryptomap to access extended list ip 172.16.2.0 allow 255.255.255.0 172.16.29.0 255.255.255.0
PIX (remote site)
access extensive list ip 172.16.29.0 outside_cryptomap_20_2 allow 255.255.255.0 172.16.2.0 255.255.255.0
Don't forget your nat exemption acl as well. For example...
ASA (main site)
extended access-list allow ip 172.16.2.0 255.255.255.0 172.16.29.0 255.255.255.0
PIX (remote site)
permit extended access list ip 172.16.29.0 255.255.255.0 172.16.2.0 255.255.255.0
-
[Issue] The connected VPN SX20, that I need more?
Hello. I'm number one special facfing which I have never seen elsewhere.
Please, see this photo belowed.
We use the H323 Protocol with mode of ISDN G/W 3241 interal Gatekeeper to call leave SX20 to other SX20.
You may feel weired because we do not use VCS, but instead of him, we use the internal ISDN G/W Gatekeeper.
ISDN to IP and IP to ISDN call works well. but on the connected VPN SX20(Building D) has some problem.
He has no problem on H323 mode "live". but, once it changed to H323 mode "keeper."
It seems to see on ISDN G/w registed.
but when we begin to call, building D SX20 is keeping just "Composition" State and never step of 'connection '.
The only one I hear is unlimited ringtone SX20 building D, and the opposite of SX20 stopovers to
Building D SX20 call also gives the same result. "the composition of demonstration" but no signal has not reached side opponent.
This problem appeared on the VPN connection, so I need to check what I most when the value on the VPN connection for telepresence.
Dose anyone know about this issue?
If you want to use the feature GK, you use the gk mode.
The VPN has very probably some treatment of layer 3 for h323 or some ports are not open.
Behind the VPN endpoint and the rest of your ip based video systems must have
direct ip connectivity without NAT and required ports must be open.
And for h323, it's a whole lot of ports.
Especially if the public ip and uri dial connectivity is on the future roadmap I would inquire
using a vcs or cucm setup.
-
PIX501 customer VPN - cannot access inside the network with VPN Session
What follows is based on the config on the attached link:
PIX Ver 6.2 (3) - VPN Client 3.3.6(A) - Windows XP Client PC
We can establish the VPN to the PIX501 session, but we cannot access the network private behind the pix.
Here is the config - I can't determine why it does not work, we are desperate to get there as soon as POSSIBLE!
We have the same problem with the customer 4.0.3(c)
Thanks in advance for any help!
=======================================
AKCPIX00 # sh run
: Saved
:
6.2 (3) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
hostname AKCPIX00
domain.com domain name
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
fixup protocol sip udp 5060
names of
access-list 101 permit ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
Outside 1500 MTU
Within 1500 MTU
external IP address #. #. #. # 255.255.240.0
IP address inside 192.168.1.5 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool akcpool 10.0.0.1 - 10.0.0.10
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
(Inside) NAT 0-list of access 101
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Route outside 0.0.0.0 0.0.0.0 #. #. #. # 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
the ssh LOCAL console AAA authentication
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set esp - esp-md5-hmac RIGHT
Crypto-map dynamic dynmap 10 transform-set RIGHT
map mymap 10-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
ISAKMP allows outside
part of pre authentication ISAKMP policy 10
encryption of ISAKMP policy 10
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup address akcpool pool akcgroup
vpngroup dns 192.168.1.10 Server akcgroup
vpngroup akcgroup by default-domain domain.com
vpngroup split tunnel 101 akcgroup
vpngroup idle 1800 akcgroup-time
vpngroup password akcgroup *.
vpngroup idle 1800 akc-time
Telnet timeout 5
SSH #. #. #. # 255.255.255.255 outside
SSH timeout 15
dhcpd address 192.168.1.100 - 192.168.1.130 inside
dhcpd dns 192.168.1.10
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd allow inside
Terminal width 80
Cryptochecksum:XXXXX
: end
AKCPIX00 #.
Config looks good - just as domestic mine to my local network. The only thing I can think is that you may have entered commands in the wrong order - which means, you could have isakmp or encryption before the config map was complete. Write memory, then reloading the pix is a way to reset everything. If you do not want downtime:
mymap outside crypto map interface
ISAKMP allows outside
Enter these two commands should be enough to reset the ipsec and isakmp.
-
Some inside inaccessible network by VPN
Hi all
I have clients that connect through the cisco vpn client. Everything is good and they receive IP etc... and can access remote on the wide AREA network subnets and also some local subnets. However, not all subnets are available to them. I find it strange that clients can access remote sites, which must first pass through the WiFi, then turns off.
The VPN Clients receive an address on the 10.44.11.0/24 range.
My ASA Interfaces are below.
interface Ethernet0/0
nameif inside
security-level 100
IP 172.27.4.15 255.255.252.0
!
interface Ethernet0/2
nameif outside
security-level 0
IP address "IP PUBLIC" 255.255.255.0
!
interface Ethernet0/3
nameif voice
security-level 90
IP 172.27.15.15 255.255.255.0
!
interface Management0/0
management only
nameif management
security-level 100
IP 172.27.10.15 255.255.255.0
I also transatlantic lines in place.
Route outside 0.0.0.0 0.0.0.0 IP public 1
Route inside 10.44.0.0 255.255.240.0 172.27.4.1 1
Route inside 10.44.128.0 255.255.240.0 172.27.4.35 1
Route inside 10.44.144.0 255.255.240.0 172.27.4.35 1
Route inside 10.44.240.0 255.255.240.0 172.27.4.1 1
Route inside 10.129.0.0 255.255.0.0 172.27.4.1 1
Route inside 172.16.0.0 255.240.0.0 172.27.4.1 1
Route inside 192.111.111.0 255.255.255.0 172.27.4.1 1
172.27.4.1 is the IVR on my main switch.
Now those green I can get to my VPN client, but the Red I can't. The above statement has not emphasized means I can route among the networks in this summary, but not all. For example I can deliver to any address in the network of 172.27.4.x, also a 172.27.33.x network address, but for example I can't route to 172.27.10.x 24.
Am I missing something? ASA direct but I can ping and route to all the addresses that I can't do it through the VPN client.
Hello
I mean that as you ASA is the original series of ASA5500 (not the new X-series) you can simply remove the 'only management' under the interface if you need traffic flows through this network to the VPN Client also.
interface Management0/0
management not only
In regards to network 10.44.0.0/24 I do not know. I don't know if configuration is enclosed lists NAT configurations. It seems for example a NAT command out there that does not display the name of 'object' above him. Must have been edited?
It seems that you have not much NAT0 configurations on the SAA. Of course if they are necessary depends on the fact if the destination LAN network has any dynamic PAT (this is why I was wondering what the "nat" command was for which it lacks the 'object' in the configuration of the attachment).
Of course, you can add this just in case configuration
network of the LAN object - 10.44.0.0 - 24
10.44.0.0 subnet 255.255.255.0
network of the VPN-POOL object
10.44.11.0 subnet 255.255.255.0
NAT static LAN destination - 10.44.0.0 - LAN 24 - 10.44.0.0 - 24 (indoor, outdoor) static source VPN-VPN-POOL
I would also go through your LAN routers and check what network masks is used for subnets of 10.44.x.x in the LAN. It may be that there is a big enough network mask that breaks the flow back to the pool of VPN.
One thing to avoid it or exclude it would naturally change the VPN pool to something completely different from the one you use on your LAN.
-Jouni
-
What data is visible to others on my network Hamachi VPN?
Original title: VPNs?
My computer has, LogMeIn Hamachi, installed on it and is connected to a network server in a remote location. The dialog box that appears when you select and open the program indicates that there is a direct tunnel to one of it is used at the remote location. Is it possible that this person could access or watch the files on my computer without my knowledge?TO: TOMMY STANLEYInterruption of the time resulted in the loss of earningsGlance, the program Hamachi or any other program that affect the operation of Microsoft products is a valid query. It is a serious matter, if you have some knowledge about the original question (VPNs) that you would like to register here for future reference it would be great. If it's not..., "shrug of the shoulders." Do not answer.I translated your Latin phase (that you included on yourself)and only admitted you that you seem to like at the time of popular size. Not a good idea.Sincerely,ooVANCEooIncorrect answer as to the interpretation of the translation. This explains the price, not whether or not the I have people wasting time (that I did not.)
You asked your question here - a place where Himachi is not supported. Rather than allow you to waste your time more far - I pointed out indirectly your madness. If you need more franchise:If you have a question about Himachi VPN - it would be wiser to ask here:
http://community.LogMeIn.com/T5/hamachi/BD-p/hamachiAlways ask those that actually support the product you have a question about - the operating system is just a vehicle to operate the product. You have a question about the built-in VPN WIndows battery?
-
Announcement of network user VPN via eigrp route
I can't have the VPN client user network advertising via eigrp, here is what I have so far. 10.55.1.0 is not announced.
Router eigrp xx
No Auto-resume
no default - information in
no default-information
by default 10000 100 255 1 1500 metric
Network 10.55.0.0 255.255.255.0
Network 10.55.1.0 255.255.255.0
passive-interface default
no interface passive inside
redistribute static
I already have about 30 static routes and they have redistributed successfully, the only way I can think to announce that the VPN, it is inside the neighbor is using a card of route-attached to the static method redistribute. The ACL roadmap would then 30 networks of the static routes in and the VPN. I really don't want to do that. Because every time someone adds a new static route, they would also have to be added to the ACL for the road map. Any ideas appriciated.
Hi Matthew,
Please, add the following command under your dynamic crypto map:
test of dynamic-map of crypto-map 10
the value reverse-road
HTH.
Portu.
Maybe you are looking for
-
Question about upgrading memory Satellite M55-S1001
can you please recommend what to do? I want to make my satellite m55-s1001 run faster please let me know, what do you recommend: 512 MB or 1 GB of memory? I'm not familiar with updates so please help!
-
How to activate the Ricoh SD/xD/MMC in Satellite A300 @ Ubuntu Intrepid Linux?
Hello I have a laptop Toshiba Satellite A300 PSAGCE 1 1 Mand I installed Ubuntu Intrepid with kernel 2.6.27.11 (I did notbecause Linux is better and faster than Vista and free... I did itbecause I'm working with simulation of calculation, and I need
-
Is there a way to get the grid is better displayed in the calendar and other programs?
-
Account live my son was slaughtered in that State for a few years. We used Live parental control for a period of time (years) but I never could 'fix' his account. Whenever he tries to use hotmail or outlook.com, it gets the error "Your account is not
-
I have display problems with a game that I just downloaded. The game is Annihlation Total; the game does not appear correctly. He works for a few seconds, all the graphics turn Rainbow and I can't seem to stop. Tried to run in compatibility mode; did