Issue of standby, power code: 0x7E - Satellite U300 - 14 p

Similar Questions

• Error 0 x 0 standby power on my Satellite Pro A300-1dz

  Hi all

  I managed to install Windows XP Home edition on my pro A300. and I put a lot of pilots needed back on the system ect, but I have a problem with powersaver one can't seem to make it work properly, I just get an error a bit like the one on this page, if it works: http://www.geekstogo.com/forum/Toshiba-Power-Saver-Problems-t87338.html

  The small window with error 0x0.
  I read somewhere that I need the common modules installed before installing all the drivers of tosh, (I don't have a tosh boot CD)

  I installed my wxp cd, that I bought off ebay, that windows has been altered by the virus and downloaded all the drivers from this site, so my computer is running fine, better even, but the night before does not work.
  How can I change this?
  Can I download the offline installation cd, not questionable torrent site, or is it on this site somewhere under my nose.

  Thank you, I'm moving.

  Jeff

  Hello

  First you must install the common Modules before installing other Toshiba tools or drivers. The common Modules are required to make the other Toshiba programs work correctly.

  In addition, it would be interesting to know what error message you get exactly Toshiba Power Saver. You can add this information please?

  In your case, I would like to uninstall Toshiba Power Saver. Then install the common Modules First, then other tools of Toshiba.
  After you install Windows XP on my laptop, I used the following installation for Toshiba tools order but noted that all pilots as screen, sound, etc. should be installed first:
  Windows XP SP3
  All the drivers
  TOSHIBA common modules
  TOSHIBA Hotkey Utility
  TOSHIBA Touchpad POWER
  TOSHIBA utilities
  TOSHIBA Power Saver
  TOSHIBA Assist

  The Toshiba recovery disc can t be downloaded. As far as I know this laptop is normally delivered with Windows Vista and this is why you must create a recovery disc yourself that you can read in the user's manual.
  But now it s too late and you have new disc order from Toshiba direct.

• Need power supply for Satellite U300-11V?

  HI -.

  I have lost my power.
  Please indicate what model it was, so I can replace it!

  Thank you

  AC adapter / CC PA3468E-1AC3 19V DC, 3. 95 a, black 75W of 3 poles,

• Issue suplly of power of the Satellite 1410-303 - need motherboard

  Hello!.

  Sorry for my English to pay so I will try to be as accurate as possible.
  I have the laptop above and it burned its built in 'diet '.
  As a computer scientist friend told me. And now I have to change the entire motherboard.
  Does anyone know where to find a new or used motherboard?

  Thank you!

  What to say to check some offers on the site of grand, public and famous auction ;)

  Or will contact the ASP in your country for a new compatible but it is a very expensive solution because the MB is one of the cost elements for laptop.

  Then maybe a second hand laptop might be a better solution

• Satellite L300 - 22L: Power saver issue code: 0x7E runnig Win XP

  Guys, I will aprecciate if someone can help me here.

  When I start the computer, this message appears "unable to locate component tpsmain.exe. This application has failed to start because cpuperf.dll is not found. Reinstaling the application may fix this problem. »

  Then I tried to uninstall Toshiba power saver, but it won't uninstall. Error coming out "a fatal error has occurred. This program may be terminated code: 0x7E.

  I'll need help to uninstall and then reinstall energy saver.
  The operating system is Windows XP Professional 2002.

  Thank you very much in advance

  Hi mate

  Just a question;
  Common Modules installed?
  You should do this!

  But before install you common Modules and energy savings you must first uninstall the energy saver!
  If this is not possible in the control panel-> software, then install a CCLeaner and this tool would be to clean the registry and operating system.

  Welcome them

• Satellite A11-998: fatal error Power Saver - code: 0x7e

  I recently bought a Toshiba Satellite A11-998. I upgraded the operating system of Windows XP MCE to Windows XP Professional. As some of the drivers were not picked up, I was download the latest drivers from the Toshiba site, but when I install the Toshiba Power Saver, utility, I get the following error;

  "A fatal error has occurred. The program will end. "Code: 0x7e.

  The only option I is 'OK '. When I start the machine and Windows journal, I was invited with the same message, even, when I try and uninstall the energy saver utility. Is it possible to completely remove the utility, or can anyone suggest how to solve the problem. Any suggestions much appreciated.

  See you soon

  It seems that there is no general solution for this problem.
  I found some comments on the similar problem, and it seems that the Toshiba recovery CD installation will eliminate the error message.

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=11238&MessageID=40588
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=9573&MessageID=33773

  But how did you install the entire operating system? Did you follow the installation instructions on the page of the Toshiba driver?
  The order is very important and necessary if you want to install the Toshiba applications on your operating system.
  I also discovered that the laptop uses Power saver power saver utility and driver.
  I think you need to first install the driver and utility.

  But everything should be described in the installation instructions

• Satellite P30-128: installation power management error Code: 0x7E

  Hello, I formatted my laptop yesterday, and I could not install power management software correctly. When the installation is complete, I get "fatal error. Program will be closed. "Code: 0x7E.

  Can someone help me please?

  Hi Simone

  In this forum, you will find many topics on this energy-saving error. Try using the advanced search.
  This product usually mistake it the user does not use the Toshiba Recovery CD but only the original Microsoft OS.
  But according to other topics, there is no explicit solution.
  It is very important that you need to install the drivers of Toshiba in the right order.
  See the installation instructions on the page of the Toshiba driver.

• Satellite A60: Not possible to install hotkeys & power saver - code: 0x7E

  I have a Satellite a60 laptop
  I installed windows xp home sp2.
  I downloaded the drivers from the toshiba site and I met problems with three of the programs.
  one is the 'Hotkey utility"which does not work and the only (when run in the CMD window)"program too big to fit in memory"message and does nothing.

  the second is with the hotkeys "display" utility which after installed said that "driver is not found.

  the third it 'energy savings' which, when installed alone gives an error: "a fatal error has occurred. "This program will be terminated code: 0x7E.

  What should I do to solve these problems? Help, please
  Thank you
  Ohad

  Hello

  Why do you not use the Toshiba Recovery CD?
  On this CD, all of the programs, tools, and drivers of Toshiba are preinstalled and should work without any problems. The installation is very easy.

• Satellite U300-151 plant of the standby or sleep mode extended when WIFI is turned on

  I have a new satellite U300-151. BIOS V3.80 and Intel version 11.5.0.32 wireless (which seems to be the latest driver). Vista SP1

  When return to work of the standby or hibernation mode laptop still crashes if the wireless switch is enabled.

  I am aware that it is an issue being discussed in a number of forums, but apart from references hopeful to SP1 and drivers, that I have not fallen on a solution. SP1 does not appear to have helped to solve my problem.

  All responses - thanks.

  My knowledge of the SP1 could makes some problems because not all drivers are compatible with the new Vista service package.

  The laptop goes down without installing SP1?

• Satellite U300-144 does not come from the standby/hibernation mode

  Hi, can anyone help?

  I have a new Satellite U300-144 accompanying the Vista home 32-bit preinstallation. I have a problem, he wants to come to the sleep/hibernation mode, and my clear blue power is always on standby/hibernation mode. I hold the power button to restart the computer and then I get a message of illegal closure because I don t shutdown right.

  I tried to upgrade the BIOS later for my model and the n t the problem, then I tried to upgrade to Vista Ultimate t doesn't help either. I installed all the drivers and everything works real well.

  A colleague using me U300 Office. I asked him to check the extended sleep/standby option and he reported that everything works correctly. He always uses the factory settings and only one update is added value package. He kidnapped the former and installed latest version of the Toshiba download page.

  Have you installed latest PPVS too?

• Satellite L30-106: Power Saver 0x7E error

  Hi all
  I own a Toshiba Satellite L30-106. I got it from Windows Vista to Windows XP pro, I installed all the Xp drivers provided by the Toshiba site.

  Everything is going well except for the Toshiba Power Saver utility, I can't install it, it still gives this error: error Power Saver 0x7E. Same thing happens when I want to uninstall it. How can I solve this problem?
  Thanks in advance

  Hello

  I hope that you have installed the power saver right!
  The laptop is one of the series PSL33E. Therefore, you should choose the drivers and tools for this series!

  In addition it is very important to install the driver Toshiba and utilities in the right order!
  Then open the installation instructions and follow the lines of this guide!

  Please make sure that you have already installed "TOSHIBA common Modules or / and TOSHIBA Hotkey Utility" ahead!

• Satellite M40-107: cannot re - install Powersaver - Code 0x7E

  Recently, I had to re - install Windows Xp on my Satellite M40-107 (PSM40E). Everything went well. Finally, I wanted to install the powersaver and I downloaded the latest version for my machine from the Toshiba web site. Installation fine until I press the complete installation (kerncentrale).

  A pop-up window appears with the message: fatal error, this programme will be completed. Code 0x7E.

  After restarting the same message appears until the powersaver is removed from the Board to run.

  Who can help?

  concerning
  @b

  Hello

  It seems that there is no general solution for this problem.
  I found and read a few comments on the similar problem, and it seems that the Toshiba recovery CD installation will eliminate this error message popup.

• Satellite U300 - 111 - device with problem of code 10

  My cousin has a Satellite U300-111 and she is having the problem of code 10 "this device cannot start.
  It formatted his cell phone, and then the noise disappeared. She tried the soundcard that she found on toshiba.com but nothing seems to work. !

  Could someone find us please a solution coz, she is really give up now?
  Thanks in advance

  Hello

  Your message is not clear
  You said that the laptop has been formatted Ok have you installed all the drivers from Toshiba?

  You must use the European driver of Toshiba page to download driver.
  The laptop seems to belong to the PSU30E. You should choose exactly this model in the form of download number.

  But these drivers are only required if you have installed a clean Windows operating system.
  If you use the Toshiba Recovery CD/DVDs you n t need the drivers because the image already contains the Toshiba drivers.

  Concerning

• Satellite U300-11v: cannot update Bios - error code 5 - without administrator rights

  I have recently bought a laptop Satellite U300-11v and use Tempo of Toshiba alerts.

  He advised me to update Bios driver - I have downloaded on my desktop.
  When I try to run the program I get the following message - "cannot load the driver, C:\Users\Sue\Desktop\bios-2007 1023123728\PHLASHNT. SYS -"Please verify your account. If you have no privilege administrator please log in again.

  I checked and there is only one user on the laptop - Sue and I am also administrator.

  Please tell us what to do. Thank you very much

  Click with the right button of the mouse and choose Run as Administrator option. Can you please point out if this helps or not?

• TOSHIBA Power Saver 0x7E error

  Hello.

  It's the short history of XP on my Satellite A200 - 14 d:

  I can't stand Vista, therefore 2 or 3 days after the purchase of my laptop and try Vista, I decided to install my WinXP Pro. At first, it was REALLY hard for me to find drivers. I even installed some Tohiba not who, by the way worked just fine. Then Toshiba began to publish its own non-experimental pilots and I was happy. Everything worked well. After almost a year I was "forced" to reinstall my OS (once again: WinXP Pro). Everything went according to plan, and after 30 minutes, I was greated by the Windows XP Welcome screen. The first task was to install the appropriate drivers.

  Well, very well. I downloaded the latest drivers before reinstalling and kept them on another partition, I was ready to go. I opened the file TXT "new facility" and began to install everything on this list (which of course I downloaded from the Toshiba site). I installed all the drivers in the line, they must be installed (although I don't really know what that some of them may be of no use to me, like a fingerprint, since I have no such thing, but fine - I can't live without a few megabytes :)) until the famouse "Power Saver Utility" has come.) I read in many forums here on this problem, but I never found a solution :(:(:(

  When I tried to install the utility, it spits out an error message with code 0x7E (?). Whenever I boot my OS, this triumph of message on my desk ruin my mood :( I tried to uninstall it (although it is not completely installed - the only thing that shows something on this subject is an icon of the control panel which, pressing on, says that I don't have sufficient rights to access the file (even IF I'm in administrative Mode) and registry keys, which does nothing (I removed it and always appear the messages that I mentioned above)).

  I tried to remove it, but once again with error 0x7E message at the beginning of uninstallation. I even REINSTALLED my OS again and again by installing Power Saver mistakes occur :(:(:( This surprises me a lot, because I've never had such a problem before even the fact that I have not followed the installation instructions. I really need a solution to this. I want to install Vista and the recovery disc. I would if I knew there was no average athor, but I'm sure there is because of the fact that I had no problems before.

  Yes, everyone throws - help. Because without energy saver, my laptop is like your desktop PC, that is--needs to stay connected with alternating current :( And it is not appropriate for a laptop.

  PS: I forgot to mention - no change in the BIOS has been done, although I don't think that this has nothing to do with my problem.

  Hello

  Have you tried two versions of power saver on the Toshiba download page?