Issue of the audio specification

Similar Questions

• Windows 7 - audio system sometimes works and sometimes doesn't. Soundcard Question. Issue of the audio recording. Poor sound quality from the speakers.

  I connect on - the work of sound system very well.  Media player works fine.  The next time I log on - no sound system.  Everything is plugged, convenience store finds no problems, Media player goes through all the steps and looks that don't worry, still no sound.  I have download a fix for the VIA recommended by Dell Driver.  I did, and it still has the same problem.  I can close, reconnect, and then the sound will work.  Sometimes I have to close and log on twice in a row so he can launch.

  Can someone point me in the right direction to solve this problem?  I am working on a Dell Inspiron 546 AMD Athlon II x 2 215 2.70 GHz and 64-bit with 400 GB of RAM.  I installed Windows 7 but when I dug deeper into the service code for this machine which found at some point in time he had installed Vista.  This could be the same Vista to Windows 7 problem audio, everyone seems to have?  I bought this Staples announced new with Windows 7 as operating system.

  I did research on all forums and responses and am unable to check if I have a "sound card".  I'm not used with the terminology so even if I follow the Microsoft instructions to find the right place to check and see, I do not understand what I see when I'm there.  It is said: ATI high definition Audio Device and VIA High Definition Audio.  Is this to say that I have a sound card or I should get it a?  If I buy a sound card will it fix my audio problem?

  Even though I had my audio problem fixed, I was disappointed by the sound quality of the speakers on this new system up to date.  My speakers on my old computer (which lasted from Windows 98) were by far superior in sound quality.  I don't understand why they sound so crappy and barely louder, and when you show the to they have a rattle for them.  I tried plugging my old speakers on my new computer, but nothing happens.  My new speakers have a Plug and a USB port.  I don't know what is... why goal can not use my 'old'?

  Finally, I want to record my vinyl on discs and need a great sound system.  Any advice?

  I removed all the ATI Audio as suggested.  The result in the short term is that the audio quality is improved.  I no longer hear the "crackling" when the sound is turned on.  I'll answer more if the issue of audio (works) continues to be a problem because the fix.  If you don't hear from me, then please consider the problem solved and my thanks to you.

• Try to resolve the issue of the audio spectrum (analog waves) endpoint.

  Hello, I created a spectrum audio wave (a wave analog face) in After Effects, you see in the image (the right end of the wave), the ends of the wave are detaches the nodal point (middle) of the spectrum and my goal is to keep each end attached to the note.

  

  You double your audio layer modify a copy to get the frequencies you want to drive Audio spectrum and use the other for audio.

  This is your solution.

• Mulitcam: Waveforms disappear when the audio "Fill left" applied

  I often waveforms disappear when you are working on Multicam sequences. Often frustrated and unwilling to understand, I'll just copy and paste the audio right in the sequence of work. Often this myself when I need to just adjust the audio set.

  I just reduced the issue of the audio application "Fill Left with Right". I'm not sure of the correct terminology here so bear with me.

  When I first create the Multicam sequence and place it in the timeline, the waveforms are projection. However the audio is displayed is not the audio OK (neck tie). In the stratified sequence where I can adjust each file in the multicam sequence, I muted the incorrect audio layers leaving the direct reverse and use the proper effect of "Fill Left with Right" or "fill the right with the left."

  Switch back over the sequence mulicam and waveforms are gone. 'Cancel' and they are back!

  It is true that I could make this change on the Multicam sequence but I learned that it is not best practice.

  Advice or wisdom?

  I'm blocking projects often and this problem does not occur every time. I tried to restart first with no luck. I use the latest version.

  Do you really need to see the waveform in the nested sequence multicam?

  If so, made Audio.

• Still is the audio transcoding even if it's in the specifications

  Yet CS6

  I have two separate projects, one to create a DVD and the other to create a Blu - ray player.  Each project has 1 video for Chapter 1 on the timeline.  The source files have been previously coded before being imported into encore.  The DVD project file is MPEG-2 audio AC3 and the show as "not transcode.  The comic book project file is H.264 with audio AC3 and shows like "do not transcode.

  When I build each project, the first thing that still done is audio transcoding.  Then it uses the video as-is.

  The audio track in both projects is actually the same, it's here:

  Format                                   : AC-3
  Format/Info                              : Audio Coding 3
  Mode extension                           : CM (complete main)
  Format settings, Endianness              : Big
  Duration                                 : 41mn 52s
  Bit rate mode                            : Constant
  Bit rate                                 : 256 Kbps
  Channel(s)                               : 2 channels
  Channel positions                        : Front: L R
  Sampling rate                            : 48.0 KHz
  Bit depth                                : 16 bits
  Compression mode                         : Lossy
  Stream size                              : 76.7 MiB (4%)
  

  It is a 100% within the audio for DVD-video and Blu - ray spec.

  However, again is this transcoding:

  Format                                   : AC-3
  Format/Info                              : Audio Coding 3
  Mode extension                           : CM (complete main)
  Format settings, Endianness              : Big
  Duration                                 : 1h 29mn
  Bit rate mode                            : Constant
  Bit rate                                 : 192 Kbps
  Channel(s)                               : 2 channels
  Channel positions                        : Front: L R
  Sampling rate                            : 48.0 KHz
  Bit depth                                : 16 bits
  Compression mode                         : Lossy
  Stream size                              : 122 MiB (100%)
  
  

  The only difference is the bitrate.

  
  

  Why still requires the bitrate of 192 Kbps?  The bitrate of 256 Kbps source file is 100% in the specifications for DVD-video and Blu - ray disc.

  
  Is there a way to stop this transcoding?

  Note that there is no audio in the menu structure.

  Put the a3c 2 on a timeline invites problems. Export to a single audio file.

• Audio for the issue of the Premier Pro workflow

  Hi, I know how to use Protools but would need to buy a new version so now I'm wondering if this is the best bet.

  What are video editors who manage the audio as well to help?  I don't want to be inefficient, because I only know how to use Protools

  Thank you

  Hearing.  It is included with the subscription of the CC.

• Satellite A200 PSAE6E: Impossible to install the audio drivers after installing Win XP realtek

  Hello...

  Recently, I repartitioned my laptop HD to install XP and kubuntu (it came with vista)... However, I was not able to install audio drivers for its audio devices...

  The laptop is a toshiba Satellite A200-PSAE6E and everest indicates the following audio controllers:

  ATI hd 2xxx hdmi @ ati radeon hd 2600 - controller high definition audio
  Realtek alc268 @ intel 82801hbm ich8m - audio controller high definition

  First I tried to download the audio drivers high definition realtek web site (32-bit version of windows xp). I tried to run the installation, manually navigating to WDM file during the installation of the pilot and navigation manually the folders where the drivers have been copied during the installation under c:\windows\system32\... all to nothing done...

  Then I tried to download drivers toshiba official of the support web site of europe from toshiba for the realtek chip... I've lived the same behavior (both when you run the Setup program and install manually force pilots)

  Then I tried to download the drivers for ATI HDMI audio device from realtek website... with the same results...

  Windows tells me that it was impossible to find a driver in the any of the archives...

  The only thing that could be the culprit because as far as I can tell, is that I installed service pack 3 RC2...

  Any help would be greatly appreciated,
  Tasos

  P.S. I've tried the two automatic installation through specification of a folder and choose the options "I will manually choose a driver from the list" in the hardware installation wizard... the result is always the same... Note that the audio works perfectly under ubuntu...

  P.S.2 IMPORTANT! I recently discovered that toshiba offers bios versions for the A200 PSAE6E depending on if it is equipped with windows xp or vista...

  This refers to which the operating system has been installed when the system was purchased, or the operating system that is currently used? Can I upgrade the Bios of my laptop with the XP version or this break from things?

  Hello

  Regarding the sound issue.
  A lot of people already asked for it here on the forum and my knowledge the driver sound doesn't work because that some Member States the fixes and patches are missing.

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?MessageID=113124

  You will need to install KB888111 and KB835221 hotfix

  With regard to the BIOS;
  Yes, some series of laptops needs a version of XP BIOS if you want to install and use the XP on the laptop. AFAIK the A200 is one of these series of laptops.

  Good bye

• Sign of the audio jack keeps flashing the message-"you just unplugged a device into the audio jack.

  Original title: sign of the audio jack continues to Flash on the bottom of the window

  sign you just pulled a device in the audio jack that he flashes at the bottom of the details screen and won't let me turn off

  Hello

   
  1. What is the brand and model of the computer?
  2. only the message all the time or it is displayed when you perform a specific task?
  3. do you have a speaker connected as audio device?
  4. have you done any software or hardware changes to your computer recently?
   
  Method 1:
   
  You can unplug and then restart the computer and connect back speakers. Check to see if the problem resolves.
  Check if the device gets detected if plugged into the same outlet.
   
  Method 2:
   
  Run the fixit from following link.
   
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Check if it helps.
   
  View more information on the issue so that we can guide you better.
   

• Why my "speaker" icon shows that the audio is not working?

  Why my "speaker" icon shows that the audio is not working?

  Hello

  Thanks for posting this question in the Microsoft Community. It seems that the audio does not work.

  Answering these questions that would help us provide a better solution:

  1. What is the full error message you get?

  2 have you tried to install the drivers for the sound card?

  3. What is the brand and model of the computer?

  Method 1:

  Try the methods mentioned in this link and check:

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones. This tutorial does not cover sound problems related to specific programs. Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

   

  Also check out this link as a reference are discussed common issues with sound:

   

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   

  Method 2:

   

  Check if the Audio services and dependency are started. To do;

   

  a. Windows Audio

   

  b. Windows Audio Endpoint Builder

   

  And its dependencies are

   

  c. multimedia class Scheduler

   

  d. remote procedure call

   

  e. generator Windows Audio endpoint

   

  a. click Start, type services.msc in the search box.

  b. search for the services mentioned above and check if the services are started and the Startup type is set to Automatic.

  c. If not, right-click on the service and click Start.

   

   

  Hope this information helps. If you have any additional questions with Windows do not hesitate to answer and we will be happy to help.

• What happened to the Audio? After several minutes/hours, the noise disappeared.

  That's what I don't understand. It has happened before, but it was not the worst. But it seems that the worst has happened now. I don't know why audio continues put muted even when she is not really silent.

  Then again, I find, then typed Audioand selected find and troubleshoot Audio playback problems , then it brings me to the Troubleshooting Wizard. The problems of the East, troubleshooting wizards can not find the problem. And even if I look at the details of the speaker, it says it's working properly. Not only the sound is affected, but also the Microphone. Finally, I thought that it is a serious problem.

  Then at that time, as I click on the Volume icon and selected soundsand I went to the reading tab, and that I right click on the speakers and the Test, it actually says: the camera is used by another application. Please close all units are audio playback on this device, and then try again. I'm happy that I finally found why my speakers will not work, but the problem does not stop there. In addition, I do not understand, I only use Google Chrome and I believe that this will not affect the speaker, or maybe it could be something else. I use some applications, but they do not seem to affect the audio.

  Please I need help. I need to know the solution to this problem. The only solution that I can do is to simply restart the computer. Yes, it is quite effective, but I don't have to restart my dozens of PC time to get my speaker is working again. I need a solution to this problem will be corrected and never come back. Without audio, I can't listen to music or watch movies. Need urgent help please!

  Hi BhoyKim,

  This problem is usually due to driver related issues or because of any third party/app program. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. are you this issue while using any specific program/app?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Try to update the Audio drivers from the Web site of the manufacturer of the computer or from Windows Update and check if it helps.

  Follow the steps to update the audio drivers:

  a. press Windows + X keys, and then click Device Manager.

  b. expand sound, video and game controllers.

  c. right-click on the sound card , and click Update driver software.

  d. restart the computer and check.

  Method 2:

  Put the computer in a clean boot state, and check if the problem persists. This will help you determine which third party/PPP program is causing this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• First Elements 13: Mounting a WMV distilled from a PowerPoint... Can't see the Audio track

  I am someone help with what we thought would be a minor change task. We have a WMV file created from a PowerPoint presentation (and no, we don't have access to this old PowerPoint). We need to move some of the video autour, but leave the audio the same. When we added the media, we can see the video and hear the sound, but the audio is not on a track in the timeline panel.

  For some time I used the first. The answer lies in the conversion of PowerPoint to .wmv? Is this why we cannot see a separate audio track? Any help would be greatly appreciated.

  Richards_Daddy

  I hope this will be new to the program rather than a question of serious program concern.

  I am basing my optimism on your statement of "when we added the media, we can see the video and hear the sound, but the sound is not on a track in the timeline.

  What version of Premiere Elements are do you use and which operating system is involved?

  For now, I'm going to presume first items 11, 12/12.1, 13/13.1 on Windows 7, 8 or 8.1 64bits.

  In what specific workspace to the project are you? You are in the area of Expert work or fast.

  Fast working space is not a dedicated numbered audio track.

  If you are in space and quick work of his film, then go to the workspace Expert with his script numbered video tracks, audio tracks numbered, track of Narration and soundtrack.

  If this isn't the problem, then we can move on to other factors related to the issue.

  Thank you.

  RTA

• Firefox V 25.0.1 on an iMac OSX 10.9 will not play streaming audio from a web site. Audio on Safari V7 OK. Any ideas on how to get the audio Firefox to play?

  The audio on the site is in MP3 format. The site is coded in PHP.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Impossible to play the audio clips on the site. Click - page breaks.

  I'm playing the audio clips, sounds, dolphins (several sites) online site. Example: http://www.dolphinencounters.com/family-dolphinsounds.php#

  There is a small icon of ear for each clip. When I FIRST tried to read a clip, I got a "Quick Time plugin crashed" at the top of the page. Tried several times, same result.

  I went to TOOLS > OPTIONS > Applications tab. Given that I did not know what type of file format / clips have been, I found ALL the entries related to QuickTime and select the default setting or a different type of player. Restarted.

  When I tried this time, I still have collision warning. I double checked to make sure that QT all apps have gone and DISABLED by the plug-in page QT Extensions. Restarted.

  This time when I clicked on the icon of the ear, no sound is played, but the page pops up.

  Checked the settings/sound engineer. All OK. Updated QT for the last 7 and updated version to update system. No sound, no warning, page a few jumps.

  Other applications in the system plays its OK. Able to play videos in line with the sound. Just the noise / icon does not work.

  I would like to hear AND capture/download the sounds of dolphins. What is the problem with my system/FF 12.0? How can I fix it? How can I download?

  I tried to read the link to the icon to see the type of audio file, so I could access the issue more closely, but all links of clip are still with no recognized sound file format. Example: http://www.dolphinencounters.com/family-dolphinsounds.php#

  There are several elements on the page, but the links are all exactly as above.

  It has been long and there are probably several versions of FF as well as earlier versions of Windows, I remember listening and capture of the audio clips. Just do not remember how I did at the time.

  Win7 64 bit, 12.0 FF, QT 7 plug.

  It may be the prolongation of the QT interval, because the problem persists with all Applications QT, deleted or not, everything seems fine. No trainer, etc. No warning.

  I tried using IE and played clips, but WITHOUT my click the icon; they played just in overview. See still no way to capture or download and know that there is one somewhere.

  Hey ccorazza, you did so well with my last, have a curtain call repeat for this one? Thank you all.

  Hey, GreyWolf, sorry for the late reply. Didn't see your message until today.

  I was unable to get sound to play on this page too, but I got confused because it's an old version and I don't want to upgrade to the new version of QuickTime. But I'll test it on another PC with a Quicktime update.

  But after checking the file type, sounds, I see that they are .wav files. These files are usually played by Windows Media Player. So check to see if you can set the type of .wav file in the Tools > Options > Applications tab for Windows Media Player. Restart Firefox to see if the new change works.

  Also, I could find the urls for the files Dolphin audio so you can download them:

  • http://www.dolphinencounters.com/sounds/whistle.wav
  • http://www.dolphinencounters.com/sounds/motorbike.wav
  • http://www.dolphinencounters.com/sounds/yelling.wav
  • http://www.dolphinencounters.com/sounds/foghorn.wav
  • http://www.dolphinencounters.com/sounds/scream.wav
  • http://www.dolphinencounters.com/sounds/Raspberry.wav

  You should be able to make links a right-click and choose Save the link under.

  How I found the links was I clicked on some empty page and chose to view the Page Source. A new window opens, I searched the word whistle then I copied the sounds/whistler.wav of the url part and added to http://www.dolphinencounters.com/.

  What other sites you have the problem with? I try to take a look at those and see if I can find a better answer for why this is happening.

• the audio control panel does not appear on various websites which I am sure they are there. I see them in IE and chrome, but not in FF

  The audio control panel does not show simply. On this site, I should see the control panel. http://www.testplek.annemariebeeke.nl/huiswerkopdracht_week3_bonus.html.
  It does not show in the other browsers, other people can see it, but I can't.
  Even with these sites:
  http://www.jokevan.nl/HTML5/oef3-3.html
  http://kokenvoorpapegaaien.nl/Kellerhuis/oef3-3.html

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• When I stop a video on any site, the audio continues to play for a few seconds.

  I press the button pause on sites such as youtube and vimeo videos. The video stops but the audio keeps going. There is also a similar delay when kind that enter or exit full-screen.

  Not that I know of.

  You have lots of tabs open, or other tabs that have active content?

  It happens that one tab opened with a video player?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode