Issues with my Equium A60-192

I've had my Toshiba for over 2 years,

Here is a list of my problems and there are so so many might save some time would be great!

1 overheating - I sent to PC Mastercare 3 times and all they do is clean the fan and the heat sink. As many people have said about the thermal paste I think it is a problem that requires urgent attention.
Although the problem is, when I recover the computer is fine for about 6 months and then it starts again!

2. the recovery disc. Being an Amature-semi-professional Windows understanding, there are a few directories that do NOT, for example delete microsoft frontpage (Attention to the record all lowercase) I think that there is some kind of hidden virus that is at fault. Although it is a recovery disk, you wonder if this is something you should look at. However, this isn't a nice feeling to know that you can not delete a single file (which does nothing)

3. as many people have said about Windows just suddening not allowing start because some files are not present! This is yesterday for me, and with a little persistence, I managed to back up all my files and retrieved using the doubtful recovery disk.

And the final point!

4. the computer does not seem to lose a huge amount of processing power, even if it is a 2.5 Ghz! I wonder if I need to add more RAM or there is an underlying problem. I just picked up the computer and it works fine!

If you could point me in the right direction, I would be grateful.

PS my laptop was a series of laptop that were shipped with the wrong BIOS. I've updated, but I wonder if it exceeds the BIOS that is defective!

Bravo guys! (and girls)

HI Chris,

Sorry to hear about your problems, but here are some tips to get on with: -.

1. overheating. It is a very common on laptops problem and if your search these forums you'll see discussed many times. The general rule is to ensure that dust and debris is reduced to a minimum in the radiator of CPU. Given that the cooling air is always being drawn in through the gills of contribution of background, it is obvious that dust accumulates. I clean my SA30 using hose of a vacuum cleaner to fear that once a month and that let it run fine without any problem of overheating. You'd be amazed how much dust crosses a few months.

2 recovery discs. It is very unlikely that you have a virus "hidden". The recovery disks typically contain an image "Ghost" of a default operating system will contain some surprising elements. The 'frontpage' file is one of these elements. It is part of the base build XP but is not filled if will show just like an empty folder (usually contains a "version" file, which is also empty. It is normal.

3 Windows starts do not. In general, if Windows has this kind of problem there are two culprits, either a rogue application (or virus) has damaged or written too part of the OS or the hard drive has experienced some kind of problem (impact or vibration for example). I've had just that kind of behavior with my own laptop and it generally preceded by a hard disk failure. I suggest that you run CHKDSK on the drive to check for bad sectors.

4. the current treatment. When the unit is newly installed from media of recovery it will work generally quite well, but you use the portable computer the contents of the disc will become more fragmented especially if you add other applications, or do a lot of browsing on the internet. I would recommend that you regularly run utilities cleaning/Desk (at least once a week) Disk Defragmenter to keep things smooth. I recommend also to download and install the malicious utilities (such as Lavasoft Adaware, Spybot and Windows Defender from Microsoft). Run those weeklies as well to make sure that the bad guys are not allowed to infect your system. Extra RAM will also help, but the benefits will be seen most noticeably if you are running heavy applications (such as games or video editors) or if you open several applications at the same time.

Hope the above is helpful.

Tags: Toshiba

Similar Questions

  • Related issue wireless on Equium A60

    I have a laptop Equium A60 and upward of unitll recently, that I would never use wireless, but now I do, and I seem to have run into a problem.

    The computer is (apparently) configured to use wifi, but when I went to turn on the switch on the side of the computer's wireless, it wasn't a slide, but rather as a "on pop, pop off" piece of plastic with no way to 'turn on' the wifi connection.

    Is anyway to turn on internal capacity?
    Thank you
    Laura

    Hello Laura

    As much as I know WLAN card is not available on laptops Equium A60.
    Each laptop with WLAN card model has a WLAN sticker placed in the lower corner. Please check if such sticker is placed on your laptop s down.

  • Drive recovery for Equium A60-157 PSA67E

    Has anyone got a copy of the disc recovery issued with an equium A60-157 PSA67E as I am trying to get this laptop for work and unable to get its hotkeys control and be able to work.

    I think I've worn out my wellcome with Equium forum and technical appeal but it's somewhere I myself lack of understanding on this subject.

    I loaded all recent downloads listed on their site, but always impossible to get these functions to work.

    So can you help me please...

    David

    Hello

    Why you n t install a new Windows OS on this laptop?
    Missing drivers can be downloaded from the page of European driver of Toshiba.
    All drivers are available!

    The recovery disc can be ordered for this model of laptop because it s too old.
    Clean install OS Win + drivers is therefore the only option

  • Equium A60: graphics issues and more

    Ive had so many probs with tis equium a60. It was overheating, stand by was not working and now the graffics were spoil! I rang this place recommended pcworld n they said try to format (large). anyway I restored it to factory settings while he was exactly as it was when I got it. stand is now working properly :) but it still is overheating (I mean really, it becomes it hot) and the graffics are always spoil.
    What happens is the screen freezes for a few seconds, then he goes the worst possible of display settings, so everything is massive and the colors are all wrong. and a pop up in windows as a encountered an error please reboot.
    This happens only at random times, I do not understand why ive formatted. I don't know if the card graffics itself is exhausted. any help or ideas appreciated. see you soon

    Hi Dave,.

    I think he should assume that your problems stem from overheating. It is very common for the dust and debris to form and block the passage of air through the CPU cooler. I suggest trying to remove such an accumulation or blowing into the heatsink (towards the cooling fans), or by sucking debris with a household vacuum. If all else fails, then you can remove the heat sink and the dust before replaceing it. Beware that this may invalidate your warranty.

    Normally a thermal trigger remove power if it detects the CPU heat too, but this does not mean that other problems cannot occur.

    If you still have problems with you appear after you have addressed the issue of overheating then please post again.

    HTH

  • Equium A60 does not work properly with the Logitech Quickcam Fusion

    If someone managed to use a webcam Logitech Quickcam Fusion with an Equium A60?

    I installed the latest available drivers and software and most of the time it screws right up to the operation of the computer. He ends by crashes so bad that I can't recover even using Manager Windows task! If I leave the USB cable connected to the PC, 9 times out of ten, it won't boot into Windows, until I have remove lead :(

    I installed the same software and drivers on my desktop PC and the device works very well every time and the boots OK with the camera connected to a USB port.

    Two computers use Win XP with SP2 and all updates.

    Hello Bill

    Do you have problems with the USB ports if you are using other devices? I really don? t know what can be the problem. Check the Logitech SUPPORT PAGE

    Maybe you'll find some tips there.

  • Equium A60-157: lines on the start screen

    Hi, I have a problem with my Equium A60-157.
    When the machine starts and get you the LOGO LOGO & P4 TOSHIBA lines running down the screen there is a fault or a common thing with Toshiba?

    Thank you

    Hello

    I don t think that these lines are a common thing on Toshiba laptops.
    This problem occurs after full load of Windows?
    Have you seen these lines on other applications?

  • Equium A60 webcam problems

    I have a Creative Live Ultra for Notebooks which I just can't work with my Equium A60-156. When I install the software it tells me no drivers have been installed and that the device not recognized. I have the latest version of the BIOS & tried to change the powersave & various other Creative solutions suggested all to nothing does not!
    Has anyone else had this problem and overcome?
    Creative discussion forums are filled with people with notbooks toshiba with this problem.
    Help! I'm getting desperate.

    Hello

    Maybe there are new drivers on the producer of webcam sites.
    I suggest check the drivers and reinstall the drivers again

    Good bye

  • Equium A60: Is it possible to get a copy of the Windows XP Home CD?

    Can someone tell me if it is possible to get a copy of the Windows XP Home CD that the recovery DVDs were made with that came with my Equium A60?

    Hi Matt

    The Toshiba Recovery CD, you can buy from the Toshiba service partner in your country.
    I don't know that it is not very expensive.
    The database with the right ASP, you will find on the page of Toshiba.

    Another possibility is to install the OS from the original Microsoft Windows, then install all the drivers needed and utilities Toshiba.
    These applications you can find on the page of the Toshiba driver.

  • Equium A60 sees a burner

    Unfortunately, more help is needed with my Equium A60 after earlier missing CD\DVD drive fault. Thanks for the help earlier, I had my return cd drive in 'My computer' and it does not read CD...

    Today, I tried to put some mp3s on a known working CDRW and my DVD burner is not seen. I get an error message saying that you do not have a cd burner... I have the CD Creator 6, which I was using before ok, too much is not a recorder on my laptop.

    I can no longer format a blank CD - r or drag and drop on a CD - RW formatted previously.

    Any ideas anyone. ?? Thanx. !!

    Hello

    in 'My computer' with the right button on the DVD drive, and then select Properties. Check whether, under the tab recording, CD recording is activated.

    Good bye

  • Equium A60: ATI mobility issues

    I have an Equium A60 (PSA67E) with Celeron 2.80 ghz, 192 RAM, windows XP, and a 7000IGP ATI MOBILITY RADEON I bought jan 2005.
    I use the laptop and after 10 minutes a message appears and tells the driver has stopped working and I need a new. Which driver should I download for this stop happening? Ive looked to other people having problems with the infanite loop and its recommended location to download a bios updared will this help?

    I sent ATI and they said I need to contact toshiba

    It is also is so slow when I try and work on it, I've defragmented it but it works still slow. Would this becaure to have 192 RAM?

    Thank you for your help

    Hello

    First of all, I would recommend trying the page of the Toshiba driver graphics card driver:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    You choose unit and OS and download and install the driver.

    In my opinion, your device must use min 256 MB memory.
    But it is not only the problem of memory. Some software programs and background processes may decrease the performance of the laptop.

  • Problems with the graphics to Equium A60 driver

    Hello everyone,

    First sorry for my bad English.

    I have some problems with my graphics card driver. After a new installation, I wanted to just install the driver for the ATI Radeon 7000 (I have an Equium A60), after that, I noticed that my pc was down. The problem was because the driver, I'm sure, because after a fresh install, without the drive VGA, my laptop works, somehow... I mean, I don't know it might work if the graphics would have a clean driver better.

    I searched on the web and saw that it was not a new problem; many people have the same problem with it. Somehow, the driver of the computer is not compatible.
    Could someone help me find a solution to my problem?
    Thank you very much

    Eurytheus

    Sorry my friend, but your ad looks really amazing. Driver Toshiba of origin is not compatible with the hardware. It cannot be. It cannot be the truth!

    Your model of laptop is almost 4 years and I assume that Toshiba had enough time to react if the display driver is somewhat problematic. I recommend you to backup all your data and try to install your laptop using original recovery image. If there is no hardware problem notebook should work again well.

    Sorry, but I don't see another solution because the pilot is certainly tested and it should work.

  • Equium A60-199 randomly shutting down - could it be overheating issue

    Hi, I am writing on behalf of a friend who knows his laptop A60 closing unexpectedlly... (she says that he stopped after a few minutes, or when she tried to open Firefox)

    Details of system
    Toshiba Equium A60-199 Model No.: PSA67E-00J00C8J
    18 GB free & 19 GB used
    512 MB OF RAM
    CPU Celeron 2.93GH

    Running Windows XP Home
    NIS 2006

    I took a look at distance and was about 30 minutes without any problem using FF logmeinitreach... There was nothing showing in the event log manager, for the time of day, that it would close down all before... so I was wondering if it is a faulty power supply?

    Everythng is going on well just clicked on the analysis of complete system of Norton Internet security which has not been run in a long time and the PC, stop NOW, it will not restart everything. ??

    Apparently she can hear some buzzing but nothing happens... (which I think might well be the blow fan)

    Advised her to let a little and about 2 hours later, she was able to turn it back on... I wonder if it could be overheating. ??

    Apparently he is 3/4 months than what was going on then ceased to happen and started again...

    Please can you give me some advice on how to clean it - other than to take it to a hardware shop

    I downloaded the A60 user manual and have themselves asked to confirm what show the lights - in an attempt to check overheating
    is the question...

    I've also read online "you can spray compressed air into the gills of admission but not airflow vents to help get rid of the dust and debris." I have looked at the manual and can see 2 lots of mouths... It is on the side and the other on the bottom, is e eintake the one on the side? I literally direct the air on side air intakes and the spray?

    When you ask him if she knows that when the fan is always, sometimes on, never an etc. she was thinking ot is ALWAYS on... who'd show up again overheating...

    Please notify
    tamba1

    Hello Cathy

    I also believe that the sudden stops are the result of overheating. If the dust is blocking cooling air flow grill is blocked and material can reach the critical temperature of material very fast. Sometimes you can start any application pre-installed, the CPU usage goes to the next level and laptop will suddenly stop.

    The laptop should be cleaned as soon as possible. If you have no experience with the disassembly procedure I recommend you contact the closest service and the laptop must be cleaned on professional way. It costs a little bit, but you can be sure that you use Notepad for a longer period of time.

    If you need the addresses and phone numbers to contact the ASP (authorized service provider) please visit http://eu.computers.toshiba-europe.com > support & downloads.

    Bye and good luck!

  • What DVD players are compatible with Equium A60 PSA67E?

    my question; What dvd players are compatible for an equium a60 (psa67e-001001en)?

    background; I did a very stupid thing! while I was at the Japan and about 18 months after buying my a60 in the United Kingdom, the packaged dvd player. I replaced it with a teac dvd player and it worked like a dream! I threw the old disk (I think it was a matsu * has, but can't remember the exact model). in any case, I came home and had a little time on my hands, so I decided to set my machine and corrupted the windows xp registry.

    Now, windows xp runs in the loop, I can't access and I need to wipe the hard drive and start again essentially. I put the recovery disk in, but the computer doesn't read him and desperately wants his wacky way to windows. I believe that it is not recognizing the teac drive that I used to replace the old. I think that if I put an original return type, the firmware can recognize the drive and I'll be back in business... or so I hope!

    of course, all the other tips would be welcome too! Thank you.

    work around? PS a work around, I thought so... copy the contents of the diskette of recovery on a hard drive (using my old computer) can change the current hard drive in my a60 with it... theory; When the computer detects the content during the start-up, it will install xp on another part of this drive and I have a working machine once again. could - this something like this work? any thoughts?

    Post edited by: markchev66

    Hello

    Did you look in the manual of the user who is usually preinstalled on your laptop?
    There you should find information.

    I found these:
    Toshiba SD-C2612
    Toshiba SD-R6332
    Matsu * a UJ-811BTJA-A
    Matsu * a UJDA760
    Pioneer DVR-K13TBA
    Toshiba SD-R2512
    TEAC DW-224TH

    It is only a part of the list mentioned in the manual. Check it!

  • White with vertical lines colored on Equium A60

    Hello

    I'm new on this but really need your help. My laptop is around the age of 18 months and has always worked well. Last week, I plugged modem broadband via Ethernet cable and configure the broadband services. A few minutes after doing this, when I looked back to the screen, he went all white with vertical lines colored it. I rebooted the machine etc and that's all I ever get now. As soon as I turn on, it will just right to white with these colored vertical lines.

    I tried to connect an external monitor to it and that works very well. The laptop is a Toshiba Equium A60. I'm worried that the screen is burned, it is possible for a power surge or something like that to go down the Ethernet cable and the screen shot?

    Thank you

    Adrian

    Display features has nothing to do with the Ethernet cable. Test with external monitor is very good, and on this way, you can see if the graphics card is perhaps responsible for that.

    From your description, I think that the view is the problem. Of course, just intensive display test can give more answers.

  • Equium A60 with defective built in memory

    Hello

    I tried to recover my Equium A60 with the recovery DVD and it does not boot to windows. I tried to install a number of different versions of windows and the error messages lead me to the conclusion that the module memory is faulty. The system came with 256 MB of memory and it is hard because it is part of the motherboard. My question is if I buy a memory module and install it in the expansion slot will be it be prevented from working by the faulty memory?

    Post edited by: binkey1st

    Hey Kevin,

    There is unfortunately no way to isolate the faulty RAM on your motherboard. Even if you install a second module of RAM the system always tries to use the built in so defective module.

    You will need to take you laptop to an ASP for the defective replace module.

    Kind regards

Maybe you are looking for

  • AirDrop could not identify first time iphone6s

    I got my new iphone6s recently tried to send photos to my friend iphone6... It is impossible to find its device and still the same thing for other Apple devices. . Tired of trying with my friends and relatives... my camera couldn't b found by other d

  • IMAQ classify concept VI necessary

    Hello How Labview classify objects using IMAQ rank VI? What are the different parameters that it checks to determine if an object belongs to the class or not? Any example to illustrate this will be very useful. Concerning Aveo

  • Programmer using flashing a segger 5 in labview

    I want to use labview to send and receive orders for a programmer to Flash 5 made by Segger.  It comes with the sets of ASCII commands, and I was unsuccessful in getting her return information using serial number basic read and write example labview,

  • The non-linear curve fit lev mar problem

    Hi, I have a set of 10000 readings recorded every second. My goal to draw these vs time readings (1-10000 s) in logarithmic scale and adjust the exponential curve that results with my model equation: a1 * exp (t * b1) + a2 * exp (t * b2) + a3 * exp (

  • G6 Pavilion: System on laptop Pavilion G6 recovery

    Son of the bought a laptop HP Pavilion G6 W7 on which a couple of years later he bought and installed W8. He has now bought a new laptop and spent the Pavilion to a friend. However, before he does, he wants to return the machine as long as the factor