It will make any sense to create a view, materialized on the top one cube MOLAP?

Similar Questions

• How to create a Viewer without buying the image? I want to be able to save the images I'm looking a subject without purchase or download.

  How to create a Viewer without buying the image? I want to be able to save the images I'm looking a subject without purchase or download.

  After talking to the Customer Service, I now get it. Thank you.

  That is to say: down arrow recorded a watermark image in the gallery without you buy. You can download an overview lores on your desktop for motorhomes with this same arrow, but it is unfortunately a watermark (unlike the DPC). You can also copy and send a link to the Gallery clients to review before you buy.

• Create clouds 2015 will not start.  I get a grey icon in the top bar, then disappears.  No way to start it.

  Hello

  I'm completely up to date with CC 2015 and all my applications.  CC does not start.  When I run CC, I get a grey-out icon in the top bar for a moment and then disappears.  Double-click on the application of CC causes it to appear greyed out for only a moment. Too much.  I deleted the data OOBE folder.  No help.  I have repaired permissions.  No help.  I secured started. No help. I have reset the PRAM. No help.

  I continue to receive notifications to open the Adobe updater but that does not do anything.  If I try to re - install CC, it initializes the installer but dies right there.  The activity monitor shows that creative cloud does NOT run.

  I am 10.10.4 running on my Mac.  Any ideas?

  Bill

  Well, it seems that there are some problems with permissions on your account.

  Go back to your regular account and please try the following steps:

  1. uninstall the application Adobe CC of the machine (https://helpx.adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html)

  2 set the "Read and write" permissions on the files of Adobe for all users in the following locations:

  a. / Library/Application Support /.

  (b) /Users/ [user name] / Library/Application Support /.

  3. restart the computer.

  4. install the application Adobe CC (Creative Cloud help |) Creative cloud for office)

• Is it possible to make an image from a channel? I like the way one of my luminosity masks look and I want to make a picture. (PSCC)

  How can I make a mask that is sitting in the range of channels and make a picture of it?

  There are several ways to do this and here are just two of them.

  1. If you want to make a new image, you can right click on the channel, click on dual channel and less Destination > Document, select new

  
  

  2. If you want to add a new layer in your document, click the channel in the Panel layers, go to Select > all the, and then Edit > copy, click RGB in the Panel layers then Edit > paste

• creating a view and use the view in a model

  Hi all
  
  I'm new to OBIEE, and I have a requirement that I have two fields to be added to a domain. Because we cannot add queries directly to a model, I have to create a view and then put the request in it, and then use the view in this model.
  I did not understand this well, if someone could help me, explaining in detail the view and adding a query in it?
  
  Thank you
  Gohan

  Hello

  (a) If you want to use your existing DB view please tick box import meta option data - RPD--> file menu
  (b) If you want to create the new view in RPD itself just right click anyof a physical table--> properties--> click the genral--> change the type of array as "Select" then you create/update your sql query, and then click ok that's all
  Once created, you can deploy advice on the database (right mouse button) or you can leave the view cancelled (worst performance).

  Ref steps more to create views
  http://gerardnico.com/wiki/dat/OBIEE/opaque_view
  http://allaboutobiee.blogspot.com/2012/05/OBIEE-11g-deployundeploy-view-in.html

  Thank you
  Deva

• Does make any sense to use Adobe RGB to process a photo taken in sRGB?

  On the one hand, it seems that color for any photo post-processing would be limited to information of color captured by the sensor.  You cannot work with information that isn't here.  For example, if the camera were to sRGB, sRGB information don't that would capture all the sensor.  Post processing in a larger color space like Adobe RGB, would be foolish.  On the other hand, I suppose it is possible that PS, during any process of development of color, could present me with ARGB options (i.e., options a wider color space) and map of smaller space (sRGB) to the largest (ARGB).

  As far as I know, most DSLRs offer sRGB or ARGB option.  However, I know there are those who value their color space ProPhoto in PS; so, there may be a post processing value in a color space that is larger than the space used by the camera to capture color information.   In case it is not obvious, I'm confused.  Any help would be appreciated.  Thank you.

  If you capture images JPEG in sRGB then files are limited to smaller color space and cannot be extended to a larger range such as Adobe 1998 or ProPhoto color space.  If your RAW capture files then it's not what your profile settings of cameras are because the Raw files are just text information of your sensor which has not been made to the pixels even serious.  It's an essential difference.  If you open a RAW file in ACR you can render pixels in any color space.

• make box will not appear will make any

  Yo,

  When I try to render outside the caisse does not appear to say his record and rather just play all my images (as space bar). So basically I can't restore to all the

  Are you sure it is "red" and needs rendering. The default setting for the first, it is to play the sequence after rendering, if she doesn't not need making maybe is go play.

• Create application Viewer customized for the iPad and iPhone

  This question has been posted in response to the following article: http://help.Adobe.com/en_US/digitalpubsuite/using/WS67cb9e293e2f1f60c5dd08612e5ea7d27f-7FF e.html

  Have you created a multi-folio Viewer? If so, what Adobe ID specified you in the title ID field. A multi-folio application doesn't include any folio which is cooked in. Instead, it fills with all published folios library using the account ID of title. In some cases, people publish folios by using an account that is not the title ID, and they ask why their folios are not displayed.

  If you create a single-folio application (with regard to simple editing / CC), you must specify the folio that gets cooked in your application.

• application to get to talk to a technician, will not accept my product ID number, and it is the right one

  I was wondering that with the restoration of the system of things are ok for the moment, however, I arrived to find that I need the ati catalyst display driver, I think it is and I had deleted that not realizing what's really was.it has been recently although i became alert. As I said I did system restore and things work well for the moment. But how the ati catlyst, more I tried to apply to get to speak with a technician but you must put the product identification number and I have the right one but it does not accept so I can't get to talk to a tech cause there are other drivers too that need updates and I do not know the name of their , and I assume that they would be able to find them. So, how can I get with a tech where this crazy to do application does not accept my product ID number

  There dell and got the product number id is dell optiplex 745 and I have the serial number and express service code, product id number is what the application to get him talking about technology, it's what's not in ecxepted I get the error message indicating that it is the wrong code when I know very well that it is the right code

  "System Restore" - do you mean the one built into Windows or a Dell may have placed on the system to restore the computer to its factory settings?

  Just go to the Dell Support web page, drivers and downloads section and choose the OptiPlex 745 in general and the correct operating system and architecture (32-bit or 64-bit) to display the list of drivers for your operating system Dell approved.

• not seeing functions to download images or any other function that used to be at the top of the page.  Elements 9

  help, trying to download pictures from my phone to my computer.  Photoshop elements Organization page opens with my photos in there, but none of the functions are at the top to let me download or do anything.  I try to connect and it says that the services are currently unavailable. Please try again later.  It's been two weeks.  also says error 400

  400 error is because you are trying to connect to photoshop.com, which was dead and buried for well over a year.

  For the missing menu Organizer:

  http://www.johnrellis.com/psedbtool/Photoshop-elements-FAQ.htm#_Setting_the_Windows

• I can't tp perform actions on email or some Web sites because the pointer does not change from a helping hand on all orders at the top of a page - any more down works fine

  In Hotmail, for example, I can open any message in the Inbox except the top one, but then I am unable to answer or to take further action because the symbol of the pointer does not change from a helping hand and clicking on has no effect.

  If I try to open the top message from the page by clicking on the command "Open" is gray.

  If I open the type of web page that has a number of menu items at the top of the page, I can't open anything either for the same reason - something more to the bottom of a page is fine. The type of Web site with menus on the sides can be used for all items except the top menu!

  Help!

  Concerning

  Brian

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported because of this problem. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• If I use VMWare Migration Assistant to move my PC to my Mac, it will make the useless PC (disable the software, delete files, etc.) or it just creates new usable by my Mac molten files?

  I have a PC with Windows 7, my brother uses, but I would like to use Windows 7 on my Mac. I'm afraid that this program can make the PC unusable by disabling the software or deleting important files. This will happen or it just creates new files that can read my Mac? In addition, the new files will require me to register the software (Windows 7, Microsoft Office, etc.), or he'll accept it?

  Thank you

  Dan

  You can P2V Ubuntu as much as you want and it leaves intact with the exception of any software source P2V you install, which is why with most of the Linux distributions I choose to use Clonezilla Live by creating first and empty VM with a VHD in the same size that the disk source hard and then start the physical Machine and the VM with Clonezilla Live and the disk image source hard to target hard drive via the local network.  Once image of the Virtual Machine will generally start without any problem and you now have a clone of work.  If you can not networked together, you can create an image on a USB key and restore the target of the Virtual Machine from the USB, for example.

  To the extent where Windows 7, you will have problems of WPA that can reach the source as well as to run WPA on either and once WGA is running on both.  Nothing gets deleted however I read messages when some users have ended up losing access to the Source and the machine virtual without having to purchase additional licenses.  So which overturned a legal issues however doing a P2V with Windows 7 could be problematic.

  Bottom line is that you must observe the EULA for the product!

• Hi everyone, I have a downloaded version of Lightroom 5 (not the online version) and my tool bar to the right will not work. I can do everything but tools toolbar won't make any changes in the photos.

  Hi everyone, I have a downloaded version of Lightroom 5 (not the web-based version) and my tool bar to the right will not work. I can do everything but tools toolbar won't make any changes in the photos.

  Help is appreciated.

  Have a great day,

  Omar

  Hi Omar,.

  Could if it you please let me know are you not capable of working in the develop Module?

  Or is the Panel on the right in gray?

  Also could you please attach a screenshot.

  Kind regards

  Tanuj

• I need a program that will make my logo and place it on a drawing that I have the patent logo is an overlap of 2 letters and I need woukd any utterance logo at the back of the product I designed

  I'm looking for a program that will help me with my logo and place it on the product I designed that I have a patent for. The logo has 2 letters this overlap and then I need the complete words of the logo at the back of the product. Anyone have any suggestions for this?

  Hi Chicky,

  Looking at your statement, Illustrator should be the best program to work with, if you need to be a vector art, otherwise you can use Photoshop as well. Please see the links below for some basics of Illustrator:

  Tutorials Illustrator CC | Learn how to use Illustrator CC

  Illustrator tutorials | Lynda.com

  How to design a crest logo | Adobe Illustrator CC tutorials

  Kind regards

  OM

• I created a DVD of a video cassette (without using the PC). I would now like to make a copy of this DVD (DVD - RW) on the PC. How can I make a copy of the DVD?

  How to make a copy of a DVD (-RW) by using Windows Media or any program using PC?

  First... just a suggestion... using a slow burn speed
  produces a more reliable copy.

  If you have software installed Nero should have
  an option for copying DVDs.

  Also, the following method can be your answer...

  The following freeware can create an ISO Image
  that allows to burn copies. Once you have the
  image created... you can use it to burn as many copies
  as you need.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (The download is: SetupImgBurn_2.5.5.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61