J pilot disappeared. Does not recognize my USB

Similar Questions

• DreamColor LP2480zx does not recognize the USB for calibration

  Hello

  I have a DreamColor LP2480zx, which does not recognize the USB connection to the computer during calibration.  I have my eye HP connected through this monitor, so I know the connection and the cable is good and mouse, keyboard.  My setup is like this:

  Reference Dell 690 running 64 bit + Windows XP

  DreamColor LP2480zx

  Apple Cinema Display 23 "

  I bought the DreamColor used, and in all other respects, it seems to work very well.  The original owner didn't have it calibrated within a certain time, but said that having had no problem with the previous calibration.  I installed the last APS (version 2.0) and updated to the latest firmware.  These updates produces no change in recognition USB problem.

  The interesting thing is, I was able to calibrate the Apple Cinema Display, using the same configuration of connection (mouse, keyboard, and HP eye connected to the computer via the LP2480zx) APS was able to see the USB connection and this very well calibrated monitor.

  I had trouble with this problem for a few days.  I've looked around quite a bit online and found a few others who have this same problem, but I did not yet find someone who can point out a solution.  If anyone has had this same problem, or has heard of results that correct it, please let me know, because it's very frustrating.

  Thanks for any help

  Clay

  An update to my previous post, I realized a work around for this problem.

  Apparently, this problem has to do with the Dreamcolor screen and/or software APS do not like working with 64 bit systems.  I'm not saying that it is always the case, but I saw the other posts on this problem on 64-bit systems, and I spoke with two other people personally who told me that they also had the same problem, try to calibrate its Dreamcolor monitor when it was attached to a 64-bit system.  HP does not seem to be concerned about this problem, because they do not even recognize its existence, but since I'm far from being the first to report this problem, he's obviously not a one-time problem.

  My solution was this: I had connect the monitor to a regular running XP 32 bit system.  After I did, I could re - calibrate the monitor without the problem of USB connection.  This isn't a very good solution because not everyone has access to several machines, running different operating systems.  But it's a work around, and it worked for me.

  Hope this helps other people who have this same problem with their Dreamcolor monitors hooked to their 64-bit systems.

  Clay

  PS- I posted this as resolved, only because I was able to calibrate my monitor.  It's not really solved the problem, but it gets the monitor working again.  Maybe HP will address this problem in the future, but I'm not holding my breath.

• Satellite A200-1AE does not recognize the USB 2.0 flash drive

  I have a problem because my satellite A200-1AE with Microsoft Vista does not recognize the USB 2.0 flash drive. He asks me a program/software!
  The same USB works without problem on other computers with vista!

  Someone knows what to do?

  Hello

  First of all, you must disconnect all USB devices and must remove the USB ports and controllers in the Device Manager.
  After this procedure, you must restart the laptop. After a new restart the Vista operating system should recognize the USB ports and should reinstall USB drivers again.

  Then you must update the Vista to the State! All fixes and patches must be installed. Please note that you will have to visit the MS Update site for all patches

  Notes; MS has released a beta of Vista SP1. I installed it on my laptop and it has solved several problems.

  Best regards

• Lite-On ENAU108 CD Burner IT does not recognize the USB key

  Windows Media Player does not recognize the USB drive letter

  Although the Windows Device Manager recognizes it.

  I want to add drive from the device to WMP

  Hello

  1. have you made any hardware changes or software on the computer before this problem?

  2 - is the USB key in Windows Explorer?

  3. you try to transfer music files from the USB key?

  4. what version of Windows Media Player do you use?

  If you use Windows Media Player 11 & try to add media files in Windows Media Player, you can follow these steps.

  a. open the Windows Media Player, click on organize > manage libraries > music.

  b. click Add and navigate to the location where the file is stored in the Windows Explorer.

  
  Reference: Add items to the Windows Media Player library

  Hope the helps of information.
  Please post back and we do know.

• XP does not recognize buslink usb 2.0 cardbus I can do

  addition to the XP Home does not recognize buslink usb 2.0 cardbus for laptop... What can I do to use it or can I use it at all?

  Hello

  · What is the number and the model of the laptop?

  · He recognized before?

  · Do you remember any recent changes on the computer?

  · What is the service pack installed?

  Check if the device is recognized in Device Manager, follow these steps:

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  c. in the Device Manager window, locate the drive and expand the drive, double-click the sub element to check if an error message or error code is listed.

• For some reason any, that my printer has enough work and when I plug in my camera to download images, the computer says it does not recognize the USB port, which could be the pronblem?

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  My printer does not work (it is said that the computer does not recognize the USB port (this also happens when I plug my camera to download the photos) I checked everything I know to check, which isn't too.)

  When did this problem start? What did you change shortly before it all began?

  Please quote the exact text of the message you get, verbatim.

• Windows does not recognize the USB key for backup

  Windows does not recognize my USB drive for backup. Windows seems to give this option, but requires that I have to use a disc in drive D. How can I change this?

  Original title: Windows 7 backup

  With USB installed & in the office, go in run, type: diskmgmt.msc

  MSC, locate & L.click on hardware, go to actions, all, select: activate

  closing of msc

• Win 7 Backup and Restore does not recognize the USB flash drives.

  Win 7 Backup and Restore does not recognize the USB flash drives for a backup image or a recovery disc.  Given that Windows 7 Starter Edition is used in many, if not most of the netbooks and netbooks have no optical drive, support for flash (thumb) drives would be very handy, especially for repair and recovery.

  Back up and restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  You can't save backups to a flash drive, you need an external USB hard drive.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• my pc does not recognize my usb camera, what can I do

  my pc does not recognize my usb camera, what can I do

  my pc does not recognize my usb camera, what can I do

  Try different usb ports, see if that helps... While doing this, turn your pc into a good place so that you hear when it detects your camera...

  If all above fails try connecting your camera again to all the usb ports again, but this time... try to switch to the Panel control, and then, in the hardware section add new material see if that helps?

  Visit your website maker of uptodate version of your camera driver camera and more help!

• Laptop does not recognize the usb mouse or the internal speakers.

  The laptop does not recognize the USB mouse. I have re installed the drivers from the site of the constructor (HP), but it still does not work.

  In addition, the internal Laptop speakers no longer work. There is no sound coming out of the laptop and it does not recognize the external headphones plugged into the headphone jack.

  I ran several troubleshooting utilities (audio playback, FixIt) and they are no help.

  Hello

  Thank you for keeping us posted.

  Sorry for the late reply.

  I imagine the inconvenience that you are experiencing. However, I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  How to use the tool File Checker system to repair missing or corrupted system files,

  Please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how to run the system (SFC.exe) to File Checker tool analyzes your system files and to repair the system missing or corrupt files in Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  If the problem persists, follow method 2

  Method 2:

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft, security scanner please follow the steps in the link provided below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.   

       

  If the problem persists, follow method 3

  Method 3:

  I suggest you try the steps from the following link and check if it works.

  No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For the problem with the USB mouse, there could be a possibility that there is a conflict of material with the mouse.

  I suggest you to try some other USB mouse with the laptop and check if it works.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

• the Magic Mouse that came with my iMac to work but it does not recognize HP USB Wireless Mouse

  the Magic Mouse that came with my iMac to work. I tried to use the HP USB mouse that I use with my MacBook Pro at home, but it does not recognize. I went into the settings but it only sees the mouse Magic Mouse.  I tried configuring it as a PC mouse.  How to recognize the USB of the computer mouse.  I need a HP bluetooth mouse?  I can't work with this mouse, it has a funny scroll for it. It is too fast or too slow.  Help!

  < published by host >

  There is no reason why the iMac should not be able to use a USB mouse. With the mouse connected to the computer off the computer tower and turn it back on. Now it doesn't recognize the mouse? If this is not the case, try a SMC reset.

  Reset the management system (SCM) controller on your Mac - Apple Support

• Windows 7 64 bit does not recognize the USB external drive HARD Stor E art 3.5 "

  I buy the art external disk HARD Stor E 3.5 "and spend a few days in windows does not recognize the HARD drive. Try to connect the drive to other USB 2 ports and nothing happens. Use a USB to see if has been a problem with the USB ports, but all 3 are OK. Try it on the laptop Asus and windows 7 recognizes the HARD disk. I formatted the drive in NTFS FS. In managing records do not show the external HARD disk. What can I do to fix this?

  My laptop is a Qosmio F60

  This is a really silly situation. It can be recognized by other laptops but not your Qosmio.
  According to the description of your HARD drive when connected simply doesn t exist for your Qosmio laptop.

  Some other HDD is recognized correctly?
  What you can try is to reinstall the chipset driver, restart the laptop and test it again.

  Since when you have this problem? Some installed updates of the last days?

• Aspire One d255 does not recognize the usb connected external ssd drive

  I want to replace the original HDD 160 GB with a 120 GB Samsung ssd 750 evo but bios and win 10 does not recognize the ssd drive as an external drive connected via a usb connection, so I couldn't create an image of my internal hard drive.  Is there a way to clone my hard drive SSD, so I can exchange the disc later?  I need to update the bios, install a missing driver, etc. ?

  I used two different connections: one is a 2.5 "SATA case disc that I used with a disk 2.5" HARD and works very well with the HARD drive and the other is SATA/IDE connector combination with cables for SATA and power and none of these works.  I read in another forum during my research that the Aspire One d255 doesn't recognize any external SSD connected through a USB either.  Since my netbook has no data, and I had just a pure 10 Windows installed on his drive HARD internal, I removed the 160 GB HARD drive and replaced by a 120 GB SSD and installed another Windows own 10.  It worked and my system boots now in less than 20 seconds.   We can close this thread now since I now have a faster machine fully function.  Thank you!

• Aspire V does not recognize the USB/phone device. Why not?

  Why does my laptop recognize my phone more?       He knows some device USB is plugged in, but it does not recognize.

  Download and install the USB Samsung drivers:

  http://www.MoDaCo.com/forums/topic/361286-26122015-latestsamsung-USB-drivers-for-mobile-phones-15550...

• Computer Windows Vista does not recognize the USB mouse

  Original title: does not recognize usb devices... Im trying to use the mouse... got a new mouse... still does not recognize it

  worked but stopped, got a new mouse and still does not recognize it. I really need it... help please

  Hello

  
  1. do you get an error message?
  2. would either not detected other USB devices in the same port?
  
  Method 1: perform the steps in the article mentioned below and check if the problem persists.
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
  
  Method 2: run the Fixit and see if the problem is resolved.
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Method 3: update the chipset drivers and see if the problem occurs.
  Note: you must contact the manufacturer of the computer to update the chipset driver.
  
  Hope this information helps.

• Router LinkSys WRT160N V2 does not recognize my USB SMC EZ Connect 11 Mbps Wireless

  I have a Linksys WRT160N V2 router. So far I have correctly connected, using two 'wired' connections, my laptop and the printer. I was able to add two DS, Wii, wireless, another laptop and a PC. The laptop that connected wireless uses the D-Link wireless device and the PC uses an other SMC wireless device. All these things correctly connect through wireless connections. The last PC I tied to conenct uses USB SMC EZ Connect 11 Mbps Wireless. This computer can actually 'see' the Linksys router and this is the SSID. When I try to connect to him, he thinks about it for about 5-10 seconds and then fate and says "Detected wireless networks". Ironically, a neighbor also has a Linksys router. Its protected by WEP, but for some reason, my PC is ready to connect to the Linksys router (has a different SSID), but since I do not know the WEP key (I don't want to actually connect to sound at least) it shows the strength of connection 11 Mbit/s and of course, does not have an IP address. Why my router does not recognize my Wireless Linksys router? I even used the LELA 'Search' application for new devices, and he can't find it, all the while my PC 'sees' the router and fails to connect. Someone knows why? FYI, the PC in question just had XP loaded on it (total reconstruction) and has never been only once on the interent.

  If you have disable wireless security is disabled, and if still you are not connect to your wireless network, then I think you should try upgrading the drivers for your SMC card, once you update the drivers for you adapter after this you can try to connect to your wireless network.