J4680 and 10.6.6

Similar Questions

• Printer J4680 and G4050: conflict between g4050 and J4680

  I just bought a new computer and before I have to charge the HP G4050 Scanner slide, I wonder if anyone has had this problem. I already have installed jet J4680 printer.  When I tried to install the G4050 besides the J4680 would not. They seemed like they confilict.  Any help would be good. Thank you

  I just wanted you to know that I installed the slide G4050 scanner and loaded OK. I think I have the Windows 7 resolved the problem of conflict between the two. Thank you.

• I have a printer hp officejet j4680 and windows 7. I can't use the cd to install for analysis.

  I have Windows 7 and I have a HP Officejet j4680, I couldn't use the instillation Cd to install the printer, but my computer has found the driver. The problem is that I have to analyze something and scan Windows fax program cannot find the scanner. How can I make the computer recognizes the part scan of the printer?

  Thank you Sandy

  Hi Sandy. I suggest if you could go to this site http://www.hp.com/customercare and find your product here. Once do you it please download the Setup online to re register the printer on your computer system.

  Because if you don't base drivers will not install correctly.

  Thank you!

• Between j4680 and ios7.0.6 wireless connection

  Even as the topic: If the driver or the operating system are not what can be done

  Hello

  The HP Officejet J4680 is not supported on mobile devices like iOS devices, only the models listed below are supported on mobile devices:

  http://support.HP.com/us-en/document/c02814760

  Kind regards

  Shlomi

• I bought a HP J4680 and W7 says that it is not compatible.

  When I bought my new HP computer I also bought a printer J4680 all-in-one wireless but the said installation disc is not compatible with W7. Are there downloads that will fix the problem or I would return the unit? If this is the case how unit works?

  Thank you

  Kim

  You can download the drivers from HP here.

• OfficeJet J4680 fax failure - need some tips from a pro!

  I have an OfficeJet J4680 and has a few problems. I send a daily fax for a number, and sometimes it sounds as if she's going through, but then the note of fax has failed is displayed. The Party on the other line said fax machine NOT ring although I distintly hear 5 rings, and then a noise indicating it connected.

  Also, sometimes there is a fast busy signal and of course, this does not work as well. I am told that I am the only person having problems sending their number. And some days, it works perfectly.

  I ran a Test Fax Rport and everything. Any suggestions?

  Hi Mylan,

  This looks like a problem on their side. Use the Service of fax HP Test to test your Fax to send & receive faxes.

  HP has a number of Test Fax Service to test fax HP products. It is available in the United States only. The telephone number for this service is 1-888-HPFaxme (1-888-473-2963). The fax service receives faxes and returns faxes within 5-7 minutes to the number in the fax header. Note: You must ensure that you have your fax header completely filled in with name and fax number or you will not get a fax back service.

• Scanning with J4680 wireless

  I just bought the J4680 and'm running on Vista.  I had a devil of a time of implementation, but finally got the printer works wirelessly.  I do not see so he can work wireless to scan, I have to plug the USB to make and the quality is poor.  Did I miss something in the documentation or can't scan for wireless?

  I guess that the 5th time a charm.  Nothing worked so I JUST uninstalled once more and started from scratch and ultimately successful to do work.

  Thank you for your efforts!

• cartridges cleaning in windows 8

  I have a printer J4680 and I just upgraded to Windows 8. I can't understand how to clean the cartridges to print under this platform. The button services seem to have disappeared.

  I would appreciate help with this.

  Thank you

  Charlie

  [Personal information]

  The cartridges can be cleaned of the façade of the J4680.  See here for more information.

• Printer is disabled when he thinks that an ink cartridge is empty.

  Appartently in one of the software updates HP thought it was a good idea to your printer stops working when he was thinking about an ink cartridge is empty.  In reality, there are always the ink left in the cartridge when the printer thinks it is empty and it is easy to see when an ink cartridge runs out.  I was in the position of having to print and important black single document, but which the printer turned off because he thought that the color cartridge is empty.

  does anyone know of a way to work around this problem really stupid?

  Bob235,

  Follow the steps listed in belpw. to print in black ink only:

  1. go to your Start Menu

  2. devices and printers

  3. right click on your J4680 and select Printing Preferences

  4. click on Advanced options

  5. in respect of the use of parameters characteristics of the printer , printing in grayscale dropdown and select black ink only

  I hope this helps!

• Installed on the new laptop, but will not work as wireless? It does not support this device?

  I have the new series g of HP Pavilion... running windows 7. installed HP office jet J4680 and works through usb cord but will not work as wireless... will not be in place.

  You are running windows 7 starter edition?

  -to know

  -Right click on computer

  -Select Properties

  -Look for the system type

  Also, what processor do you have?

• can't put my HP printer in mine network windows 7

  I can't get my HP printer in network of mine

  How to ask a question...

  http://support.Microsoft.com/kb/555375

  Beyond that...

  The wireless printer is already connected to your wireless home network?

  If yes have you installed the software from the manufacturer of the printer wireless on your Windows 7 computer.

  For example...

  When I installed my camera HP J4680 AiO (print/fax/scan), I did these steps...

  1. Creates an ad hoc connection between the J4680 and my laptop Win 7.
  2. Configured the J4680 manually with my network SSID and the encryption type and encryption key. I did steps 1 and 2 because my random 63 character ASCII encryption key contains characters that are not available in the network control panel on the J4680 wireless. If you use a key encryption without special characters, you should be able to simply configure network settings from the printers Panel wireless.
  3. The provided HP software, including drivers on my laptop Win 7 installed. The HP software went out and found the J4680 on my network.

  HP support forums for further assistance...

  http://h30434.www3.HP.com/T5/printers-and-all-in-ones/CT-p/inkjet

• How to connect a printer wireless to my laptop

  I have a printer HP Officejet wireless 6500 E709n Series and I'd like to connect wirelessly to my Acer Aspire 5734Z lap top. Please notify.

  The wireless printer is already connected to your wireless home network?

  If so do you have installed the software from the manufacturer of the printer wireless on your computer Win 8.

  For example...

  When I installed my camera HP J4680 AiO (print/fax/scan) on my Windows 7 computer, I did these steps...

  1. Creates an ad hoc connection between the J4680 and my laptop Win 7.
  2. Configured the J4680 manually with my network SSID and the encryption type and encryption key. I did steps 1 and 2 because my random 63 character ASCII encryption key contains characters that are not available in the network control panel on the J4680 wireless. If you use a key encryption without special characters, you should be able to configure just the network settings from the printers Panel Wireless.
  3. The provided HP software, including drivers on my laptop Win 7 installed. The HP software went out and found the J4680 on my network.

  The steps should be similar for your device HP OfficeJet 6500 E709n, IE. Get it on the first wireless network and then install the HP software on your machine, Windows 8.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&destPage=product&DLC=en&JumpID=reg_r1002_usen_c-001_title_r0001&LC=en&product=3795406&

  More help from HP...

  http://h10025.www1.HP.com/ewfrf/wc/product?cc=us&destPage=product&DLC=en&JumpID=reg_r1002_usen_c-001_title_r0001&LC=en&product=3795406&

• Print job is stuck in the print queue and cannot be removed in HP OfficeJet J4680

  Original title: HP OfficeJet J4680

  Print job is stuck in the queue and cannot be deleted.  Convenience store said it is fixed, but it isn't.

  Hello

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following questions:

  1. what operating system is installed on your computer?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  3. you receive an error code or message?

  4. what store did you try?

  What version of the operating system Windows am I running? :

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

   

  Please follow the steps in the link below and check the issue.

  Unable to print? Print jobs are stuck in the print queue:

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02205477&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=3692888

  For reference:

   

  Solve printer problems:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

   

  I hope that the information above helps you.

• OfficeJet J4680: Officejet J4680 ghosts and print at an angle

  Hello

  I have an Officejet J4680 all-in-one and he has recently started printing eratically.  No matter if it is print or copy again, gives the same results.  The picture suggests that the document is either slipping or getting stuck fingers in the stages of printing.  If printing is slower that it works better, but I can't get a full page of printing without a failure.

  Some lines are ghosts about one inch further down the page, some are printed in a light and appear to stretch, others are printed twice.

  Help, please!

  Hey @Chippy_T,

  Welcome to the Forum from HP Support.

  I see that you are having print quality problems when printing and copy with your printer HP Officejet J4680 all-in-One. I want to help you with this. I have some suggestions that might help.

  I recommend a detailed to deal with ghosting and biased text troubleshooting process. Try the following steps:

  We will attack first - feeding of the printer mechanism

  Clean the rollers

  Residue of paper or dust on the rollers inside the product, or on the rear access door can cause paper feeding problems. Follow these steps to clean the rollers.

• HP J4680 AiO: HP J4680 AiO and Windows 10

  Installed 10 Windows from Windows 7, installation went well, with only two points.

  HP is my printer/scanner HP J4680 AiO will print but not scan more solutions center program comes with a white screen.   I followed the instructions given to Brian in the previous post.

  -authorized temporary folder

  -installed v14.8.0 hp full feature software and drivers

  The printer works well (do not fax set up system have) but the scan does not work.   When I try to use the solution Center, I get a white screen.  Right-click on the screen and the compatibility test running can do nothing.

  System has worked in Win 7, but not win 10.

  Just to try a work-around, I tried running Win fax and scan and received the message... cannot communicate with the documents folder.

  Suggestions?

  Thanx

  Hi, after contacting Richard Bradley, HP VP, he put me incontact with a live support person.     Bottom line after trying to install the HP J4680 AIO we have determined that the drivers are not available in Windows 10, also that the application of scanning and Capture will not work effectively either.   Part of the J4680 printer will work but not the scanner.    After reviewing several other brands, I see that the same thing is happening with their current printers / alumni.   The HP representative said that new pilots could come out in October until January.

  So I decided to go back to windows 7 which was easy, there is an application in the control panel.  Once there I still had the same problems with the printer, so I deleted all the programs of HP printer, turned off the firewall and antivirus program (do this first, incidentally).  I had try to install and remove several times but after several hours was able to get the printer works as it should.

  I'll wait 10 windows drivers may be available.

  After writing to Mr. Bradley, a response was quick and the accompaniment of the victim has been most helpful and knowledgeable.  I had criticized HP and their market after service, but frankly, I was impressed by this gesture.