J611 all-in-one Deskjet 3050 has: HP DeskJet 3051 a AiO will not connect wireless

Similar Questions

• J611 all-in-one Deskjet 3050 has are not excepted by my new sleekbook 15. Both HP

  My HP laptop does not except for installation of printer HP deskjet 3050 all-in-one series J611 a. Because I bought a new laptop with windows 8. I find that a little odd because I think that HP would do all their own compatible equipment. Is there something simple I can do because I'm not the biggest guy of savvy computor?

  Thanks a lot to 7000 Rainbow! Aid has worked very well and was very appreciated. I'm not a very good computor geek so chances are I need help again. I will try to go through the right channels to get help. I little confusing to me sometimes but the challenge is good for me. Thanks again!

  Penner

• HP Photosmart c7280 all-in-One vs. Windows 7 32 bit Home Premium - will NOT PRINT!

  I recorded more than 6 hours trying to get this thing to print.  It does not print.  Tried the wireless, USB, Ethernet, NOTHING!  My laptop Lenovo detect it when I plug in the USB cable, downloads, everything he needs, it's good to go, without errors, convenience store can not find something.  When I try to print something, the printer icon appears in the taskbar, but when I scroll over it, it says '0 documents pending' then it disappears eventually.  The only thing that I could print are the test page & page of the HP Toolbox diagnostics software help page.  When I try to print from any other program, it will not be printed.

  I downloaded and installed all the patches, updates and even reinstalled the software that is supposed to be compatible with WIndows 7.  I'm tired, I'm in a bad mood, I'm about to give up AND do what they hope, I'll do and just buy a new printer.

  I browsed all the forums here and done everything someone suggested.

  Have you installed the driver http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=3204785&lc=en&cc=us&dlc=en&lang=en&cc=us star

• I have the series of J611 all-in-one Deskjet 3050 has and that a part of my document is being analyzed.

  The paper is correctly centered, and it is scanning and opening perfectly, only part (the upper right corner) of the document appears. I tried to copy a document to see if she read the document correctly, and it copies fine so I know it's the reading of the entire document. Why he won't open on my cell as a part? I tried to move around or zoom out, but when I do, it shows only a part of it.

  Mucking around with some of the parameters...

  I got the scanner to scan the entire page!

  I open the HP utility and deselected "Activate Scan to Computer" (which allows to start the scanner itself analyses). -> Then I went and scanned the document via "Applications"-> "Hewlett Packard"-> HP 3 '' scanning application-> and pressed 'scan '.

  Weird. Don't ask me why it works, but it's a work around that works.

• All-in-one Officejet Pro L7780: driver HP Officejet Pro L7780 will not install with Windows 10

  Recently, my HP Officejet Pro L7780 stopped printing. I uninstalled the driver and then reinstalled the driver from the HP website. Every time, when installing, I get a message that "bing bar does not work on this version of Windows. Once the installation is complete, the test page is fine but I can't print from one of the applications (e.g., WORD, Adobe Acrobat, etc.), getting an "Error printing" message, rather than each time.

  I use Windows 10. The printer was working fine since I've upgraded to Windows 10 until recently.

  I've uninstalled and reinstalled the driver several times as suggested on the HP website. Any suggestions on how to solve this problem.

  Thank you.

  Hello @AMNYC2015and welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you are having errors in the print driver. I would like to help!

  I recommend to remove the cartridges ink and starting by a power reset.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  I also recommend running the HP Print and Scan doctor.

  Good luck and please let me know the results of your troubleshooting operations. If this solves the problem, click on accept the Solution below, as well as others to find the answer.

  Thanks for posting on the HP Forums!

• 3520, printer all-in-one will not connect wireless

  I am running Lion on my Mac. The printer works correctly when it is connected by the USB cable. The test of the printer indicates the wireless connection is OK. But when the cable is disconnected, my computer does not find the printer so I can't print wirelessly. The computer says it is plugged into the same ID wireless. I tried to reinstall the HP software to no success. Very frustrating that the printer was working wireless for a year with no problems. It just stopped during the night. Thanks for any help you can provide... Ted

  Hi TED1234,

  There is a chance that the HP software that came with the printer may not work with your version of Lion. I recommend to download the installation here:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-103382-2&cc=us&DLC=en&LC=en&OS=4114&product=5162506&sw_lang=

  After you download the driver, I recommend trying to follow the steps listed in the method three second-stage for OS x 10.7 Lion. In step 2 of the second method, there are 2 options. According to what is invited on your Mac, you will want to follow the instructions for the appropriate option.

  Please specify the details of your installation if this does not resolve your problems of wireless configuration. If you encounter error messages, please note them here and attach a screenshot of your laptop. You can take screenshots by pressing "Control + shift + 4" and the screenshot will automatically record your desktop.

  Thank you.

• Windows 8 will not connect wireless for HP deskjet F2480

  I have a new HP laptop with windows 8 and tried setting to the top of my HP Deskjet F2480 printer by connecting the usb cable.

  The printer appears under "Devices", but it shows offline. Whenever I try to print something I just get a failed"" message.

  I know the printer works wireless as my previous laptop was working well. I checked the 'sharing' is on.

  I tried to download the drivers for Windows, but not luck.

  Can anyone help please?

  I'm glad you are printing.  Let me know if I can do anything else for you help.  Nice day?

• Destjet HP 3050 has j611 all-in-one series does not not on windows 8

  I got Hp Deskjet 3050 a j611 all-in-one series on my windows 7, I've upgraded to Windows 8 and my printer did not work properly so I uninstalled so I could reinstall it, but it will not install because it says that it is not compatible. is it possible that I can make this printer work using Windows 8?

  Hey kelyka1,

  I guess you are trying to reinstall with the CD supplied with the printer.  Click on the link below to access the download page for the driver for Windows 8 for the Deskjet 3050 a J611.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109013-2&cc=us&DLC=en&LC=en&OS=4132&product=5061082&sw_lang=

  I hope this helps.

• All-in-one Deskjet 4535: Deskjet 4535 AIO - Scanner function not supported in Linux Mint 17.3?

  I just bought the all-in-one Deskjet 4535. As I could not set up in Linux Mint 17.3 using hplip 3.15.2 and hplip-gui (it wouldn't appear in the peripheral installation dialog box), I used the utility printers (system-config-printer) and configured through CUTS. Even then, I was forced to use the driver 4510, as a driver of 4530 series does not seem to exist.
  After having done that, I can print it, but I can't use the "Simple Scan" scanner or any other utility to scan.
  I also tried to detect the network with xsane Analyzer, but it would not detect it.

  The only way to use the scanner is via the web interface, the all-in-one offers fortunately.

  Is there something else to try? The 4535 is supported under Linux or am I out of luck?

  Well, I went to hplip.sourceforge.net and I should have started with it in the first place. I solved the "problem" in downloading and installing the latest version of hplip that supports the 4535 entirely. The repo of Linux Mint has an outdated version of hplip and 4535 needs at least version 3.5.11 to work properly. Use the latest version fixed it immediately.

• All-in-one DeskJet 4625 and printing with Mac OS 10.9 Maverick

  I just installed Maverick - Mac OS 10.9 - and print is no longer a device all-in-one DeskJet 4625.  The computer and the device are communicate since I can see the ink levels, scanner and other functions, but it will not be printed.  I know that there is no problem with the printer, since I can print to it from another computer that has installed Mac OS 10.8.  Apparently, there is a need for an update of the printer driver.  Apple support is not an updated driver.  So, my question is hp will provide an updated driver?  And when?

  Hello

  Apple provide a updated driver.

  First restart your Mac, then click on the Apple icon and select software update, do not forget to install any available HP or Apple updates.

  If you can't print, try installing the package from the link below and check if this is useful, although it does not list the Mavericks, it should work on the operating system as well:

  http://support.Apple.com/kb/dl907

  Shlomi

• HP All In One Deskjet 3520 Microsoft Report Errorr

  HP All In One Deskjet 3520 error - I have Windows XP and every time I try to print (if, since an application, Internet or serigraphy, I get: XXX program has encountered a problem and needs to close - sorry for the inconvenience.) Send the report. I uninstalled and re-installed the printer twice - what happens?

  Hello

  Please perform the below mentioned steps that should solve the problem.

  1. click on the Start button on the computer.
  2. then click on Control Panel.
  3. then printers and faxes
  4. in the top left, click on add a printer
  5. click Add a local printer
  6. and while "Use an existing port" is selected, select "Virtual USB port... "and then click Next.
  "7. in the manufacturer list, select HP, then under the Deskjet 990 c printer list", then click Next and complete the wizard

  Now try printing. It should work.

  Kind regards
  Jabzi

  Give Kudos to say 'Thank you' by clicking on the White Star under my name.

  Click on 'accept as Solution' if it has solved your problem, while others may find it.
  I work for HP

• HP Deskjet all-in - One 1051 registers as an all-in-one Deskjet 1050

  Recently bought a HP all-in-one Deskjet 1051.  After you have installed on the computer, he enrolled as a series of J410 Deskjet 1050 all-in-One.  I was wondering why.

  The numeric designation may vary according to the regional location or the retailer where the product was purchased. It can also link in how the product as the default value of different media formats, for example in North America with paper letter against Europe with A4 size. What it boils down to is that your printer is a Deskjet 1050 printer specific specialized series for a retailer or the country.

• All-in-one Deskjet 3632: Deskjet 3632 black ink not working not

  Hello

  I bought a HP all-in-one Deskjet 3632 and have set up on my laptop and phone. I scan a document was nice and feel it was ok, but the documents will not print using black ink. The first impression is rather a gray, and it seems that the color ink is the only one used. When you print word documents, none of the black ink is printing and only a small amount printed on the first page of test, where none of the letters are readable at all. The cartridges are new and in the same area as the printer. I did the fixes suggested without result, bar to buy a new cartridge which I hesitate to do what the budget is tight. Is there a fix that can be made, or will I have to resort to buying a new cartridge?

  Greetings @JamesMontgomery,

  Thank you access the Forums from HP Support for extra support! I see that you have problems printing in black. I will do my best to help you with this problem.

  I wasn't sure of what you have already tried. I would say the contacts of the cartridge cleaning manually, if you have not already: ink cartridge errors. Do not take into account the title.

  If you still have questions, please contact HP support: phone help worldwide.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

• HP All in One deskjet printer: X HP

  I have my HP all in one Deskjet Printer 3522 programmed to Eprinting from my cell phone wireless. I want to add a second computer to wireless network for Eprinting.  What are the steps to add the second computer.

  I had taken these measures as soon as possible.  As stated earlier I just needed to create the homegroup and get matching password on both computers. Once everything very easy, I determined the steps to follow. Printer works on both computers.

• All-in-one Deskjet F3335 allows to print "black only" on the profile of a user, no other

  Hello

  I have an annoying problem with my all-in-one Deskjet F3335.  I print a lot of documents on my printer.  Rarely do I need to print anything in color.

  Since the acquisition of a computer running Windows 7 (x 64), I was not able to print in "grayscale: black cartridge only" on my profile; the only option is 'high quality '. (see image below)  I thought it was a systemic problem until printining something user profile on my husband.  His profile will allow for me to select "black cartridge only."
  

  I tried to uninstall and reinstall the software and updates. This did not help.

  Hoping someone out there might have a suggestion for me on how to solve this problem (and stop wasting my color ink)! Thank you

  As I understand it, you can change the printer to print in only black and white on a profile, but not on the other on the same computer. Is this correct?

  This type of question usually depends on the permissions available on each profile. I would hazard a guess that your husband is a Director or that there privleges more than your own profile. I check to make sure that your account is set up as an administrator first.

  Secondly, I would also check the 'Advanced' tab, that sometimes you can change the settings for printing color black and white or grayscale.

  Let me know!