JDE 4.7 debugger stops is no longer at the breakpoints

Similar Questions

• USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?

  Hi ahmedman_10,

  ·         You follow the steps in the article of my previous answer?

  Follow these steps in my previous answer and at the same time this article, follow these methods.

  Method 1: Follow the steps in the article.

  USB port may stop working after you remove or insert a USB device

  Method 2: Update the latest drivers for chipset.

  How to manage devices in Windows XP

  For reference:

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

• I downloaded an e-mail 11 long pages - printer stopped on Page 5 of the 11 - However, printer keeps printing starting with Page 11 all over again.

  I downloaded an e-mail 11 pages long.  Transmission stopped on Page 5 of the 11 but the printer keeps printing starting with Page 11 all over again.  How can I reprogram the printer to stop printing?

  Hi EileenBrenner,

  See the below Microsoft article and try the steps to cancel or delete the print job, check to see if it helps.

  How to cancel printing or to delete a print job that is stuck in the print queue in Windows XP

  http://support.Microsoft.com/kb/946737

• The debugger stops on a line randomly

  The debugger seems to be stopping at a random line that doesn't have a breakpoint on this subject. I tried to create a breakpoint on this line then disconnected, and it always stops here. It does not have to report a bug or a crash, it stops just like if there is a breakpoint. There is another reason, the debugger can stop at a line of code? Is it possible to fix it other than to wait to resolve random? Thank you.

  He solved. It turns out that sometimes breakpoints appear not in code view, and the only way to see and disable is to activate the display of the breakpoint.

• When the computer is turned off to stop is no longer the Vista 64 external USB Drive (SeaGate/Maxtor)

  Vista 64 - bit SP2. TB external Maxtor OneTouch 4 drive, worked well, now he wants to run continuously. The USB disk drive does not stop when I go through the steps to Remove material for it, then shut down the computer normally. Or the last step of the computer stops the disk external closing. Now the external hard drive keeps spinning, I don't know about the heads of read/write being parked or not and the white light comes on. This disk is used for the storage of photos; 30 backups; and several databases. I can't wait to have the drive platters turning 24 x 7, and I can't confirm that the read/write heads were parked safely. The error message associated with this question is below in bold. The player is now like the rabbit, continuous running.

  Diagnosis of Maxtor for this drive have been executed successfully.

  Maxtor check driver indicates that the driver is the most recent.

  Device driver Vista says the car is fine. I checked that the drive can read and write. Different backups have been recorded on this disc. I have not tried a restore because of this problem.

  Maxtor says that there is not any change in firmware pending for this drive.

  Seem like a command to close jammed somehow being sent on disk.

  Apparently the Maxtor One Touch USB Device, property, to optimize for quick removal of the external drive, you just completely shut down the computer and the external hard drive finished last (no need to use the hardware logic safely remove). The other option here is "optimized for performance (you must use the material logic safely remove) to turn off the player."

  These flags are defined in the Device Manager-online records-online Mass storage Drive L:

  Anyway, you try to stop the external hard drive, it will fail with the following error message:

  "Windows can't stop your 'Generic Volume' device because he's busy." Try again later. " Or a statement to this effect."

  The only software running when the error is Vista 64 bit and the logic of trying to stop the player.

  Thanks for any help you might be able to offer. Bill Sullens

  Hi Bill,

  Thanks for the detailed explanation

  I you suggest to activate the clean boot and then test to see if this works very well as expected

  Step 1: Put the computer in a clean boot

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Let us know if this helps

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Debugger will not stop at the breakpoint in any project

  In my Flash Cs6 (I still use it because it supports TFL) debugging function suddenly stopped working. Debug mode will not appear on the breakpoints. Throw an error it shows but breakpoints do nothing. I compared this CC and it always worked by the breakpoints.

  How could I find a solution for this?

  I saw another thread here with this issue marked as answer but the answers did not work for me.

  One thing I did before this has stopped working has attempted to open a recent files fla that I moved to a different folder. Do not know is that this has nothing to do with it.

  Today suddely he started working again and I have no idea why.

• CopyFileEx calling with the COPY_FILE_NOBUFFERING flag is no longer works; the computer CRASHES

  Earlier this month, MS published KB3121255. One of the two issues he said to resolve: when you call the CopyFileEx function with the COPY_FILE_NO_BUFFERING option to copy files to a read-only Windows Server 2012 volume, Volume Shadow Copy Service (VSS) backup of the IP data server fails with an "ERROR_INVALID_PARAMETER" error message

  I started running in CopyFileEx + COPY_FILE_NO_BUFFERING problems in the last days. It is part of a supercharged version of the Replace.exe I've been using and improve for years. Because I wanted to see where each file has been COPIED with success, I always turn off the COPY_FILE_NO_BUFFERING. I tried to use my code to replace it today, and as soon as he informed me that he copied, it blocks HARD. So I loaded into the debugger and instrumented to it like crazy, particularly emphasizing the CopyFileEx calls. These calls are pass on only one computer, although I also use replace software update on other Win 7 (32 & 64-bit) machines on my home network.

  Of course, CopyFileEx is where it hangs. Allow me to set hanging for you (Replace is a console application):

  1. Call CopyFileEx with the COPY_FILE_NO_BUFFERING option (btw, my code tests the version of the OS to make sure that the option is supported before you use it).
  2. The deaths of the sytem STOPS; If I try to open an another command prompt, which weighs too much.
  3. Use Ctrl-Alt-pause to break into the debugger (running under VS 2012). She broke out and note that the system is in an impasse. Therefore an impasse that you are unable to force even a shutdown. VS works very well, and I see the stack of calls, variable in the sources of files, etc.. While I can close several applications, including VS, the app to replace launched by VS's not going anywhere. You must press the PC power button to do a forced stop, then walk back again.

  I installed KB3121255 hoping it would cure the problem, but he did not. In an attempt to learn more about when and where it crashes, I then coded a CopyProgressRoutine() reminder for I can see a little more on what Windows was done before she suffocated and hooked hard. For those who are familiar with CopyProgressRoutines, I was able to see a single entry, advising me of the first stream. Not ready to copy data, all notifier recall a stream was found. As soon as I return from CopyProgressRoutine() to the BONE, it's on. An impasse & hung.

  When I no longer use the COPY_FILE_NO_BUFFERING option, all this goes away. I'm tired and I have no more time for testing (almost 05:00 and I've been chasing this for the last hours 7 - when you have to restart several times it really drags things).

  HEY MICROSOFT: I hope that someone is going to look on this. KB3121255 has NOT this problem in Windows 7!

  Thank you...

  -dennis

  I'm running Windows 7 x 64 SP1. I have install all security updates as they come out and other optional as well (such as KB3121255). Here are a series of SYSTEMINFO, in case it's useful:

  Host name: DENNIS
  Name of the operating system: Microsoft Windows 7 Professional
  OS version: 6.1.7601 Service Pack 1 Build 7601
  OS manufacturer: Microsoft Corporation
  OS configuration: Standalone Workstation
  OS Build type: multiprocessor Free
  Registered owner: dennis
  Registered organization:
  Product ID: 00371-177-6350957-85666
  Original installation date: 27/04/2011, 20:52:36
  Starting system: 12/04/2016, 03:51:11
  Manufacturer: Lenovo
  System model: IdeaCentre K330
  Type of system: PC x 64
  Processor (s): 1 processor installed.
  [01]: Intel64 family 6 model 42 Stepping 7 GenuineIntel ~ 2584 Mhz
  BIOS version: LENOVO DKKT18AUS, 15/02/2011
  Windows directory: C:\windows
  System directory: C:\windows\system32
  Starting device: \Device\HarddiskVolume1
  Local system: en - us; English (United States)
  Input locale: en - us; English (United States)
  Time zone: (UTC-08:00) Pacific (U.S. & Canada)
  Total physical memory: 12 271 MB
  Available physical memory: 8 899 MB
  Virtual memory: Max size: 24 539 MB
  Virtual memory: available: 20 715 MB
  Virtual memory: in use: 3 824 MB
  Office (s) swap file: C:\pagefile.sys
  Area: HOME
  Logon server: \\DENNIS
  Corrections: 413 fixes installed.
  [01]: KB2849697
  [02]: KB2849696
  [03]: KB2841134
  [04]: KB2670838
  [05]: KB2830477
  [06]: KB2592687
  [07]: KB971033
  [08]: KB958559
  [09]: KB2305420
  [10]: KB2393802
  [11]: KB2479943
  [12]: KB2491683
  [13]: KB2492386
  [14]: KB2506014
  [15]: KB2506212
  [16]: KB2506928
  [17]: KB2509553
  [18]: KB2511455
  [19]: KB2515325
  [20]: KB2533552
  [21]: KB2534366
  [22]: KB2536275
  [23]: KB2536276
  [24]: KB2541014
  [25]: KB2544893
  [26]: KB2545698
  [27]: KB2547666
  [28]: KB2552343
  [29]: KB2556532
  [30]: KB2560656
  [31]: KB2563227
  [32]: KB2564958
  [33]: KB2570947
  [34]: KB2574819
  [35]: KB2579686
  [36]: KB2584146
  [37]: KB2585542
  [38]: KB2603229
  [39]: KB2604115
  [40]: KB2619339
  [41]: KB2620704
  [42]: KB2621440
  [43]: KB2631813
  [44]: KB2639308
  [45]: KB2640148
  [46]: KB2644615
  [47]: KB2645640
  [48]: KB2647753
  [49]: KB2653956
  [50]: KB2654428
  [51]: KB2660075
  [52]: KB2661254
  [53]: KB2664825
  [54]: KB2667402
  [55]: KB2676562
  [56]: KB2679255
  [57]: KB2685811
  [58]: KB2685813
  [59]: KB2685939
  [60]: KB2690533
  [61]: KB2698365
  [62]: KB2699779
  [63]: KB2705219
  [64]: KB2709630
  [65]: KB2709715
  [66]: KB2709981
  [67]: KB2712808
  [68]: KB2718704
  [69]: KB2719857
  [70]: KB2724197
  [71]: KB2726535
  [72]: KB2727528
  [73]: KB2729094
  [74]: KB2729452
  [75]: KB2732059
  [76]: KB2732487
  [77]: KB2732500
  [78]: KB2735855
  [79]: KB2736422
  [80]: KB2742599
  [81]: KB2743555
  [82]: KB2750841
  [83]: KB2756921
  [84]: KB2757638
  [85]: KB2761217
  [86]: KB2763523
  [87]: KB2770660
  [88]: KB2773072
  [89]: KB2785220
  [90]: KB2786081
  [91]: KB2789645
  [92]: KB2790655
  [93]: KB2791765
  [94]: KB2798162
  [95]: KB2799494
  [96]: KB2799926
  [97]: KB2800095
  [98]: KB2803821
  [99]: KB2807986
  [100]: KB2808679
  [101]: KB2813170
  [102]: KB2813347
  [103]: KB2813430
  [104]: KB2813956
  [105]: KB2820197
  [106]: KB2820331
  [107]: KB2832414
  [108]: KB2833946
  [109]: KB2834140
  [110]: KB2834886
  [111]: KB2835361
  [112]: KB2835364
  [113]: KB2836502
  [114]: KB2836943
  [115]: KB2839894
  [116]: KB2840149
  [117]: KB2840631
  [118]: KB2844286
  [119]: KB2845187
  [120]: KB2845690
  [121]: KB2847311
  [122]: KB2847927
  [123]: KB2849470
  [124]: KB2852386
  [125]: KB2857650
  [126]: KB2861191
  [127]: KB2861698
  [128]: KB2861855
  [129]: KB2862152
  [130]: KB2862330
  [131]: KB2862335
  [132]: KB2862966
  [133]: KB2862973
  [134]: KB2863058
  [135]: KB2863240
  [136]: KB2864058
  [137]: KB2864202
  [138]: KB2868038
  [139]: KB2868116
  [140]: KB2868623
  [141]: KB2868626
  [142]: KB2868725
  [143]: KB2871997
  [144]: KB2872339
  [145]: KB2875783
  [146]: KB2876284
  [147]: KB2876331
  [148]: KB2882822
  [149]: KB2883150
  [150]: KB2884256
  [151]: KB2887069
  [152]: KB2888049
  [153]: KB2891804
  [154]: KB2892074
  [155]: KB2893294
  [156]: KB2893519
  [157]: KB2893984
  [158]: KB2894844
  [159]: KB2898857
  [160]: KB2900986
  [161]: KB2901112
  [162]: KB2904266
  [163]: KB2911501
  [164]: KB2912390
  [165]: KB2913152
  [166]: KB2913431
  [167]: KB2913602
  [168]: KB2913751
  [169]: KB2916036
  [170]: KB2918614
  [171]: KB2919469
  [172]: KB2922229
  [173]: KB2923545
  [174]: KB2926765
  [175]: KB2928562
  [176]: KB2929437
  [177]: KB2929733
  [178]: KB2929755
  [179]: KB2929961
  [180]: KB2930275
  [181]: KB2931356
  [182]: KB2937610
  [183]: KB2939576
  [184]: KB2943357
  [185]: KB2949927
  [186]: KB2957189
  [187]: KB2957503
  [188]: KB2957509
  [189]: KB2957689
  [190]: KB2961072
  [191]: KB2962872
  [192]: KB2965788
  [193]: KB2968294
  [194]: KB2970228
  [195]: KB2971850
  [196]: KB2972100
  [197]: KB2972211
  [198]: KB2972280
  [199]: KB2973112
  [200]: KB2973201
  [201]: KB2973337
  [202]: KB2973351
  [203]: KB2976627
  [204]: KB2976897
  [205]: KB2977292
  [206]: KB2977629
  [207]: KB2977728
  [208]: KB2978092
  [209]: KB2978120
  [210]: KB2978668
  [211]: KB2978742
  [212]: KB2979570
  [213]: KB2980245
  [214]: KB2981580
  [215]: KB2982378
  [216]: KB2984972
  [217]: KB2984976
  [218]: KB2984981
  [219]: KB2987107
  [220]: KB2990214
  [221]: KB2991963
  [222]: KB2992611
  [223]: KB2993651
  [224]: KB2993958
  [225]: KB2994023
  [226]: KB2998527
  [227]: KB2999226
  [228]: KB3000061
  [229]: KB3000869
  [230]: KB3000988
  [231]: KB3001554
  [232]: KB3002885
  [233]: KB3003057
  [234]: KB3003743
  [235]: KB3004361
  [236]: KB3004375
  [237]: KB3005607
  [238]: KB3006121
  [239]: KB3006137
  [240]: KB3006226
  [241]: KB3008627
  [242]: KB3008923
  [243]: KB3009736
  [244]: KB3010788
  [245]: KB3011780
  [246]:
  Network adapters: 1 card installed.
  [01]: Intel 82579V Gigabit Network Connection
  Connection name: local connection
  DHCP enabled: Yes
  DHCP server: 192.168.1.1
  IP addresses
  [01]: 192.168.1.221
  [02]: fe80::a962:4d4c:1f37:afef
  [03]: 2601:602:8f01:1900:5105:b4fb:7ace:c8cd
  [04]: 2601:602:8f01:1900:a962:4d4c:1f37:afef

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• How long is the grace period if I ran out of storage iCloud before my pictures/videos are deleted?

  How long is the grace period if I ran out of storage iCloud before my pictures/videos are deleted?

  Is there an article in support?

  iCloud does not delete your files even if you lack storage. She stops just to download new files to update your existing backups. You can delete files by yourself if necessary. Also here is the article where you can find more information how to manage your iCloud-storage space: manage your iCloud - Apple Support storage space

• A Web site that I use States: this agency will support is no longer using the Protocol of internet security TLS 1.0 or 1.1 - how to change this with Firefox?

  I use a site that now has the following statement:

  Safety notice: as part of our ongoing efforts to improve security, this agency will be no longer support the use of the internet security TLS 1.0 protocol effective August 1. In addition, we will also stop the support for the Security Protocol Internet TLS 1.1 on 1 September. This means you must update your browser to use this site. For any questions about the update, please consult your browser provider.

  How do I change this?

  Unless your Firefox settings have been changed, Firefox is ready for sites that use TLS 1.2, the latest version of the SSL protocol.

  For example, if you click on the Green padlock on this site, so more information, the bottom of the Panel security in the Page Info dialog box should show that the page was encrypted using TLS 1.2. I have attached a screenshot showing where to find this information.

  Can you confirm that this works?

• How to stop multiple self-switching to the address bar every time I open a new tab and try typing something anywhere outside the address bar?

  How to stop multiple self-switching to the address bar every time I open a new tab and try typing something anywhere outside the address bar? As something just wants me to use this integrated search when you type something non-Web-address in the address bar and press to enter. And the most ridiculous thing is that happens repeatedly on as every second, as I just got off the address bar and start typing again, but still he passes me in the address bar, then 3, 4 times like that. And the result is that I don't see the address of this page.

  I think that its has something to do with my AVG Antivirus, because it started the same time a Nation AVG started to appear in each new tab I opened (and which is irritating as me, I've read here on support.mozilla.org and it seems that the only solution is to completely reinstall Firefox, but I don't want to lose all my settings) but when I type something in the address bar and press enter It opens the search results in Google.

  Please try to help me, I love Firefox but I have to switch to Chrome until I fix this.

  Thanks in advance

  First of all, please update Firefox 32. 22 is no longer support is not safe. So, let us know if you still have this problem. Update Firefox to the latest version

• Firefox is no longer in the first 5 seconds after the launch plan

  I am running Win7 with all the latest updates and Firefox 13.0.1. After I run Firefox, a few seconds later (it varies), the Firefox window is no longer in the foreground. It's as if I clicked on another window or wall-paper, and the Firefox window is no longer selected. It becomes embarrassing when I launch Firefox, click a bookmark to blog and try to scroll down with my mouse wheel. All of a sudden, it stops scrolling because the window is no longer in the first plan/selected, and I have to click on the Firefox window back to the foreground. Note that if I open other windows, the Firefox window always remains above these windows. But the window of Firefox itself is not the selected object.

  I finally found the plugin that asks that question for me. The plug-in, I confirmed my system is 'Shockwave Flash 11.3.300.268', which is the most recent available now. Deactivating a plugin solves the problem for me. I hope an update of Adobe will respond to that.

• Satellite Pro M10 suddenly stopped starting or to reach the POSITION

  Hi all, hope someone can help or advise me on what to do.
  My Pro M10 suddenly stopped starting or to reach the POSITION.
  When the switch is pressed, green light turns on and stays on and that of about it, no display and not even the rotation of the fan to the top. :(

  Funniest, it is the battery always fresh and is fine.
  As you know, this model is out of warranty now and I'm technically minded and disassembled laptops before so I don't mind open my machine.

  Just thought I would ask here first before doing so.
  Hope someone can point me in the right direction of what's wrong, have heard a rumor that the M10 with a video fault, but surely would not stop the machine POST'ing would still.

  Thank you very much
  JayZ

  Hi Jay,.

  Difficult to pin-point your problem remotely as you will understand, however, I expect the laptop either emit a series of beeps (in a type long, short of the boss) or else Flash HQ led to give some clues as to the reason for the failure of the POST.

  First I'll try to remove/replace the modules of RAM, hard disk and also the optical drive to see if it improves the situation. Otherwise, I would tend to suspect the motherboard failure.

  Kind regards

• STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

  I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

  I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.
  What about Otto
  Windows vista Home basic

  Hello

  Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/

  =========

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  
  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
  repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
  discs of the machine system good cheap that you already own windows (you will need to reinstall
  If necessary). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• How can I leave the program runs longer than the duration of sleep?

  I have a desktop Pavilion Elite HPE - 110 t (win7) .  Turn off display & sleep have the default value (10 & 20 minutes).  According to the instructions that I read (somewhere in the paper documentation) when I got to the computer a few months ago, I do not turn off it during the night.  I think included grounds for diagnostics to run (by default grid) & I "think" I've seen (the next day) scans messages, updates, etc. have been executed.  I however turn off my modem to prevent the activity internet auto (anyway) during the night.

  This configuration has been satisfactory until this morning, when I tried to leave an app running I knew would require more than one hour to complete.  I had other non-computer tasks to do & did not sit the computer baby to keep him awake.  In fact, I thought that 'activity' (including the activities of memory without keyboard activity) he would keep awake.

  To my surprise when I got home 3 hours later, treatment stopped about 45 minutes after the start.  This was determined by the timestamps of the output files.  Normal processing resumed after that I have he awakened from his sleep.

  Is there a way (outside change go-to-sleep time setting each time) to allow work of long-term programs/application to keep running & to go to sleep after the treatment is finished? Am I wrong to think that 'auto diagnostic' are running when the computer & I sleep at night?

  Thank you

  The process will continue even after the monitor goes to sleep.

  I first noticed this problem when you make copies of images hard drive hard drive.

• Try to install 9 Captivate. Mac has been extremely slow, so I had to stop and restart early in the installation process. When I try to open the installation program again, it reads "Setup Failed To Initialize. Please download Adobe Support Advisor to dete

  Try to install 9 Captivate. Mac has been extremely slow, so I had to stop and restart early in the installation process. When I try to open the installation program again, it reads "Setup Failed To Initialize. Please download Adobe Support Advisor to detect the problem. "But there is no longer the support Counsellor. How to solve this?

  Go to Adobe Captivate