JLab GO earpiece/headset Bluetooth connected but not available for audio playback

Similar Questions

• Headset Bluetooth connects but microphone does not work

  I recently bought a blue Parrott Xpressway II Bluetooth headset to use with my Windows 7 computer and a Bluetooth of Rocketfish RF-MRBTAD adapter. First installation went well, and it worked for several hours. Then it disconnected and struggled to reconnect you to the top. Once he did reconnect, the helmet would work for reading, but not for the record.

  At the present time, I have:
  • Updated Bluetooth driver to the latest version.
  • Choose the Microphone headset as default device for recording in the sound section of the control panel.
  • Choose the Microphone headset as default device for playback in the sound section of the control panel.
  • Unplugged the headphones and then reconnected it.
  • Unplug the Bluetooth adapter and reconnected.
  • Restart the computer after each of these steps.

  So far, nothing seems to work. The headset is listed as peripheral by default for recording in the sound section of the control panel. (There the green check mark next to it). However, the helmet is clearly not pick up sound. No matter how hard I speak into the microphone, not a single green bar appears next to the list for headset.

  However, the network of microphones (which is simply registered as loan, with no green tick) straightens his. I see green bars appear next to his entry, when I make the noise. That microphone works, despite not selected.
  Can anyone offer advice on what I could do to get this working microphone? In the end, I want to use with Dragon Naturally Speaking. But for now, I'd settle for just the microphone to transmit all information.

  Hi Brian,.

  What is the brand and model of the computer?

  Method 1:
  I suggest to run the troubleshooter and check if that helps.

  (a) OpentheAudio recording utility by clicking the Start button, and then click Panel.

  (b) in the Search box, type Troubleshootingand then click on troubleshooting.

  (c) under hardware and sound, click Troubleshooting audio recording.

  Method 2:
  If him persists, try plugging the headphones on another computer as suggested by Sébastien M on September 12, 2013. Check to see if the problem occurs on the other computer.

  Check out the link for more information.

  Record audio with Sound Recorder
  http://Windows.Microsoft.com/en-in/Windows7/record-audio-with-sound-recorder

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Headset Bluetooth paired but not audio heard

  I have a model of Creative SL3100 bluetooth headset which I paired with my PC under Windows 7 64-bit. I use a small and cheap made in China USB bluetooth dongle that can be bought for a few dollars.

  After successfully coupled with Windows 7, the helmet appears as a detected bluetooth device. When I checked my--> Device Manager Control Panel, I could see:
  PC - user-->--> Generic Bluetooth Radio Bluetooth Radios
  --> Microsoft Bluetooth enumerator
  Then, I opened the Panel--> equipment and sound--> Sound--> manage audio devices, I could see "Bluetooth Audio Renderer" appears as one of the options under the playback tab. So I clicked on it and set it as the default device.  When I play an mp3 track, I could see that the sound level next to the "Bluetooth Audio Renderer" bar up and down, which indicates that it indeed works. But somehow, I don't hear any audio through my headphones.
  I'm sure that the helmet works well because it transmits audio perfectly when I pair with devices such as my mobile phone. So, what was wrong along the way?  Is there a driver I need to download and install to solve this problem? Thank you.

  Hello

  ·         You are able to hear the sound from external speakers?

  ·         Have you tried to uninstall the drivers and put it back, once again?

  In the bluetooth settings, you can see your headset in the list of bluetooth devices. If you long - click on the name of your helmet, a list of options will come ("Disconnect", "Options... (', etc.). If you press 'Options '. ", then you will need to 'Media' is checked.

  Method 1:

  I suggest you try to use the Audio playback problems troubleshooting to solve the problem. Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2:

  I suggest you to update the latest audio drivers on the manufacturer's Web site. Click on the link below:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:

  I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  See also the link below:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  I hope this helps.

• Shown music also purchased on the store page, but not available for purchase (cash receipt)

  I bought an album and three songs separate (Ed Sheeran 5 and Avicii Broken Arrows, For a Better Day and Waiting For Love) as I was charged and received an acknowledgement by electronic mail. They record as purchased on their individual pages in iTunes Store.

  At the time wherever I bought that I subscribed music Apple, and when this subscription has failed I want to delete songs and redownload them - I had messed with the news of multi - Ed Sheeran album, and it is no longer registered in iTunes as a 5-disc set. I deleted the Avicii songs with the rest of her album stories BEFORE Apple music subscription completed expects that they are always available for purchase but none of them are available here

  Did you check to see if you have them hidden in the Cloud: mask and unmask purchases iTunes or iBooks on your Mac or PC - Apple support ?

• earpiece/headset bluetooth Nokia BH - 503 connection problem in windows 8

  After you have installed windows 8 in my laptop, I've just matched with my nokia BH-503. But after cutting the first time, I don't then reconnect with my laptop. My windows is already updated, but still, I am facing this problem. Even now when I try to add my audio device my laptop can not find this. But I can easily connect this audio device with my laptop and windows 7. So eventually, I'm sure that WINDOWS 8 I have this problem. I already searched a lot information of websites & questions, answers, but still this problem have no solution.  Its very sad news for users of windows 8. :(

  Headphones Audio/stereo/headset BLUETOOTH Connection with WINDOWS 8

  
  
  
  
  Hi! It's Pranzell. Guys, it's like a very simple. Here, follow my steps :
  
  
  1. Switch Off your bluetooth device. Any device, just turn it off.
  2. now the charms blow bar and open settings ->  change the settings of PC-> devices.
  3. keep it button / STOP for 8 seconds or more until a BLUE led flashes and Flash.
  4. your device came into PAIRING MODE, quickly, click "Search devices" in your computer.
   
  5. remember the blue led of your device blinks just 3 minutes (Nokia/hTC/Blackberry/Jabra/Phillips) search and pair your device in this time only.
  6 install/update the drivers manually if necessary. W8 is usually installed in everthing.
  7. the pairs! You will receive a notification, "added stereo Audio Gateway".
  8 open the Panel of control-> hardware and sound-> sound-> the Read tab.
  9. right click on the new added device and assign as the default value. 
  10 say thank you!  :)

• HP ENVY 17-j113tx TouchSmart: Bluetooth paired but NOT connected to the device

  Bluetooth paired but NOT connected to the device - question - Upload of files from device to PC fails.

  Description of the problem
  
  

  • Download a file from PC (Win10 x 64) for Android phone has worked well.
  • Download the same file from the phone on PC (Win 10 x 64) - FAILURE.

  Someone knows how to deal with this issue, provide a work around...?

  I have way too much time on my hands right now...!

  Treatment

• BlackBerry Smartphones the Motorola HS820 earpiece/Headset Bluetooth Audio works with the Blackberry Bold 9700?

  The Motorola HS820 earpiece/Headset Bluetooth Audio works with the Blackberry Bold 9700?

  It's not clear to me, if only the bluetooth Blackberry devices work with the Bold 9700, or any bluetooth device.  With the Bold 9700 recognize to ask the code four numbers when first by aligning it with the HS820?

  I matched two Plantronics, a Motorola and an earpiece/headset Cardo bluetooth with the 9700 and they work very well for phone calls, but I can't get the audio from Media Player to play on one of them.

• The Bluetooth connection is not visible on the Satellite A100

  Hey,.

  I have a Satellite A100-797.
  The laptop had Vista Home Premium pre-installed.
  But I have upgraded to Vista Business (32 bit).
  Now my problem is that in Flash cards, the Bluetooth connection is not visible.
  If I press the F8 key on my keyboard, the menu appears when I normally can I enable / disable WIFI and Bluetooth.
  But only WLAN is now visible. I installed all the packages in the driver s page. And I am sure that those who are the most recent.

  Can someone help me please?

  Thank you
  Mathijs

  Hi Mathijs

  Thanks for your second assignment and useful comments.

• Qosmio F20: Bluetooth connectivity does not work with my phone

  Good day it

  I've had one laptop to another in the past and I didn't have this problem with this computer, but then 3 weeks ago I bought myself this Qosmio F20 and try to send the info to my Sony-Ericsson K600i.
  He worked with my other laptop. On my laptop I don't see devices in the Control Panel, but it doesn't seem to be any information for any active or visible Bluetooth to my phone.

  Could you help me please or tell me where to get the program?

  Concerning
  Jürgens

  Hello

  It would be very useful to know the name of your unit. Qosmio F20 - xxx.
  I ask because the Bluetooth module is not available on several units of Qosmio F20.
  In my opinion you should first check if the laptop supports Bluetooth.

• E4200 Mac connects but not PC after crash

  We had a power failure.  Connection Wi - Fi disturbed and has not corrected itself as in the past.

  A MAC and android os phone will connect but not PC with different operating systems.

  Wired computers will connect and go on the internet but not when try wireless on windows PC.

  I have a comcast modem and a router wireless e4200.

  Tried the re-engining of the modem and the router.

  Tried to unplug Cisco on computers and then reconnect to wireless connection.

  Sometimes laptops will discover the excellent show and Cisco of the signal power but does not connect.

  Wireless is enabled on laptop computers.

  Do not know what has changed this causes for the victory of the PC only.  (IP? etc?)

  Any help is appreciated.

  Thank you.

  Thank you for the answers.

  I did a factory reset within the connection on the router.

  After resetting my settings it works fine.

  No idea what scattered settings.

• Ipad Cisco ipsec VPN connects but not access to the local network

  Hi guys,.

  I am trying to connect our ipads to vpn to access network resources. IPSec cisco ipad connects but not lan access and cannot ping anything not even not the interfaces of the router.

  If I configure the vpn from cisco on a laptop, it works perfectly, I can ping all and can access resources on the local network if my guess is that the traffic is not going in the tunnel vpn between ipad and desktop.

  Cisco 877.

  My config is attached.

  Any ideas?

  Thank you

  Build-in iPad-client is not useful to your configuration.

  You have three options:

  (1) remove the ACL of your vpn group. Without split tunneling client will work.

  2) migrate legacy config crypto-map style. Here, you can use split tunneling

  3) migrate AnyConnect.

  The root of the problem is that the iPad Gets the split tunneling-information. But instead of control with routing traffic should pass through the window / the tunnel and which traffic is allowed without the VPN of the iPad tries to build a set of SAs for each line in your split-tunnel-ACL. But with the model-virtual, SA only is allowed.

• connected but not connected

  Hello
  on 11g on HP UNIX.
  
  Can not understand: connected but not connected:

  sqlplus sys@+ASM as sysdba
  
  Enter password:
  ERROR:
  ORA-12154: TNS : 
  Enter user-name: sys as sysdba
  Enter password:
  Connected.
  SQL> select * from v$instance;
  select * from v$instance
  *
  ERROR at line 1:
  ORA-01012: not logged on

  Any idea?
  Thank you.

  sqlplus sys@+ASM as sysdba
  ORA-12154: TNS:
  Enter the user name: sys as sysdba

  SQL > select * from v$ instance;
  Select * from v$ instance
  *
  ERROR on line 1:
  ORA-01012: not connected

  You connect to the instance by TNS connect descriptot ASM?
  Which alert log file shows?

  tnsping + ASM

• delete a block - my computer won't let me use google chrome as a browser. It indicates that the internet connection is not available.

  When you use the internet, my virus detector asked if I would allow google chrome to download a newer version. I clicked on the decline, and then my internet has stopped working. I finally got back on, but now my computer won't let me use google chrome as a browser. It indicates that the internet connection is not available. I was able to use other browsers, but not Google. I tried disabling my firewall to see if it would work then, but it still doesn't work. Any suggestions? I'm afraid, that I blocked it somehow. Thank you!!

  Hello

  I suggest you post your question in the Google Chrome forums here: http://www.google.com/support/forum

  This looks like a problem with this specific program and not with Windows. I hope this helps!

• When I try to connect to wifi, it shows this connection is not available.

  OT: problem with wifi.

  I use a fujitsu laptop computer lh532 and my OS is Windows 8 pro. I can't connect to wifi but it displays connection available. When I try to connect to wifi, it shows this connection is not available. I also try to re install the driver wifi. but the problem is still on. What can I do now?

  Hi Francois,.

  Thanks for the reply.

  Thank you to try the following steps to solve the problem of troubleshooting.

  I need more information this problem so that I can help you better.

  1. Have you followed the steps I provided in the previous answer?

  I suggest you follow the methods mentioned below and check.

  Method 1. If you use a laptop, then I suggest you to check the key wireless keyboard that is on or not.

  Method 2 Try to reset the command netsh winsock via the command prompt.

  1. press Windows + X key and right click on command prompt (which must be run as administrator).
  2. Type "netsh winsock reset" and press enter (without the quotes).
  3. now restart the system.

  Try to follow these methods and response with the State of the question so that we can better help you.

  Thank you.

• I have Firefox 5.0.1 and a theme I want download says it works with Firefox 4.0b9pre - 7.0a1, but at the top, he says that he is not available for my platform. What should I do?

  I just downloaded Firefox 5.0.1 and one of the themes I want to download and try says it works with Firefox 4.0b9pre - 7.0a1. Upstairs, however, it is said that the theme is not available for my platform. He arrived with a few other themes as well, but I didn't check what versions they work with. I don't know what this means or what to do about it. The theme is at this link: https://addons.mozilla.org/z/en-US/firefox/addon/bloomind-ft-deepdark-2/

  It is said:

  'Bloomind FT DeepDark 2' is a theme that was created to transform the look of Firefox 4 for Windows users. It was specially designed for the seven, but the rendering is quite specific on XP and Linux (I can t test on MAC, but for those who would like to try on this platform, you can force the download and install it).

  So try to save this file using the context menu.

  • http://KB.mozillazine.org/themes