JO HP 5740: Connection of the hard HP OJ 5740

Similar Questions

• Mac Pro 2013 does not connect to the hard G technology drive

  Hello

  I recently bought a Mac Pro and I am trying to transfer files from my hard drive mini 1 TB of G technology itself. The files came from a backup who was recently transferred to my 2011 macbook pro. I tried using cord USB 3.0 for the Mac Pro doesn't have a firewire plugs, but it does not recognize my hard drive. The hard drive is not showing any signs of work because I don't hear the fans turn on the player. The hard drive connects perfectly to my macbook pro via firewire, so should I buy a bolt of lightning for this firewire adapter? I really hope that I don't need to buy a new external, but I'd love to hear a few options for this issue, it would be greatly appreciated.

  Best regards

  May be that the USB port does not provide enough power. Sabrina drve is provided with a plug that allows to connect a plug to an AC wall power supply.

  The manual

  http://www.g-technology.com/sites/default/files/fields/field_files_pdf/product/g-drive_mini_3.0_usermanual_r3_1015.PDF

  Neither the Web site

  ve http://www.g-Technology.com/Products/g-Drive-Mini-1-TB-External-Desktop-Hard-DRI

  give the voltage of power

  It works via the USB port on your MacBook? The USB part is maybe defective.

• Tecra 8000 - connection of the hard disk

  Hello

  My old Tecra 8000 dropped last night after 4 years loyal service. She simply refuses to start to start most of the time. I think that this is a motherboard problem because sometimes it is starts on a diskette and remains stable for about 10 minutes. I know that the hard drive is fine as I can copy files on disk when booting from the floppy in DOS mode. Is there a way I can connect the HDD on a desktop PC so that I can recover the files which are there?

  Thanks for your help,

  Tom

  Hello

  James means the case of HARD drive 2.5 external with a USB port or / and the firewire interface. These cases, you can buy everywhere. Also check ebay.

• Re: Satellite Pro L500 - eSATA connect to the HARD 3 "5 Seagate SATA internal drive

  Hi all
  I have extracted a desk ST3500830AS SATA hard drive.
  This HARD drive has both a SATA and a single POWER connectors.
  SATA connector has 7 POWER connector has 15 pins.
  What cable to connect the HARD drive on my Satellite Pro L500 eSATA port.

  [URL] http://www.eprice.it/cavi-vari-assemblaggio-MANHATTAN/d-4122748?metb=ATG_pcat [URL]

  Thank you
  Giovanni

  Use google and search for 3.5 "SATA to ESATA External Hard drive Caddy

  You will get many hits

• When I connect windows, the hard disk works for several minutes

  Hello

  A few months ago and after installing some windows update (XP Sp2), I see when I login to windows, drive hard work continuously for several minutes and speed goes down.

  What windows software using the hard disk with log in?

  Thanks in advance

  motasemsadelghi

  What you see could be linked to a task that you have schedules (such as anti-virus, defragmentation of the hard drive, etc)

  Check the tab startup in MSConfig for items which currently running as part of the startup of your PC. See

  http://support.Microsoft.com/kb/310560

  The foregoing is for XP, but also applies to Vista.

• Windows 8 cannot connect to the external hard drive after you have added the drive case.

  Original title: I have my hard drive from my previous PC attached to my new PC with windows 8. My old PC had XP. How to access the external hard drive?

  I had problems with my XP operating system and could not transfer all the files to my new PC. I spoke with Dell who I believe created the problem with software support. I was told to get out the hard drive, buy a hard drive enclosure and get my files from there. I can't find the hard drive.

  Hello

  Thank you for the update.

  Given that the problem occurs when the hard drive is connected to a different USB port or another computer, it is probably related to the connection of the hard disk.

  Method 1: check if the problem occurs in another computer after removing the hard disk enclosure.

  Method 2:

   

  Step 1: Check if the hard drive is detected in Windows Explorer.

  To do this, follow these steps:

  a. connect the hard disk of the computer.

  b. press the Windows key + E to open Windows Explorer.

  c. check if the hard drive is present here.

  Step 2: Check if the hard drive is detected in disk management.

  To do this, follow these steps:

  a. on the desktop, press the Windows key + X , and then select disk management.

  b. check if the hard drive is listed there.

  Contact the manufacturer of the hard drive and hard drive enclosure for assistance.

  http://www.Seagate.com/support/

  Please get back to us if you have any other questions about Windows operating systems. We are happy to help you.

• How to copy a catalog of external hard drive to the hard drive of the computer to use smart insights not connected to the external hard drive?

  I am very new to LR5. I put LR5 in place so that my catalog and photos are on an external hard drive. I discovered that when not connected to the hard drive, LR5 can't find my catalog, therefore, I can't do any editing in intelligent insights, unless it is connected to an external hard drive. How can I fix this so that I can edit photos without being connected to an external hard drive. Is it possible to copy the catalog out of the hard disk on the computer's hard drive or I have to re-establish a new catalog using LR5? Must the catalog always be loaded onto the hard drive? Thank you in advance.

  Yes that's correct. The LR catalog must be on the computer's internal drive. Then when you have smart previews activated you can change the image without going through the reader that they are connected. When you connect this drive images will be updated.

  Simply COPY these 4 folders on your internal drive in a folder called Lightroom catalog that you create. Then open LR and go on the file menu point and select open catalog. Navigate to the folder you created called catalog in Lightroom and select the Lightroom Catalog.lrcat 5 file and click Open. Once restart Lightroom open change preferences, > preferences, and under the general tab, in the catalog default section make sure that "when starting to use this catalogue:" listings in the area where you copied the files. Something like Macintosh HD/Wherever, have created it this folder/that folder name/Lightroom catalog.lrcat 5.

• Connecting apple tv to the output of the HARD drive?

  Can someone help me with the apple tv connection to my TV? My TV has only hdmi output which I already use for a satellite dish. The only other available exit is the HARD drive, but I only have a hdmi cable to hdmi. Is there such a thing as hard drive hdmi cable to? any help would be appreciated.

  I guess it's a usb port on your tv labled as a hard drive. If that's true, you can get a cable hdmi to usb - if there is such an animal.

  Good day.

• Drive external hard (connected to the Mac mini USB) disconnect during use

  I have a 3 TB (WD green) hard drive in an external hard drive enclosure "miniStack MAX Media", connected to my Late 2012 Mac mini via USB.

  I don't know when he started to do this, but I recently noticed that it was dismantling even when she was in use; the error was:

  Disc eject does not correctly
  EJECT 3 ' TB' before you unplug or turn off.

  I replaced the USB cable and saw the same mistakes.

  I moved the HARD drive to a different box. same mistakes.

  I swapped the HARD drive to a whole new WD 4TB blue; same mistakes.

  So now I have a new drive in a new case with a new cable, and I see the same messages "Disk not ejected correctly".

  (By the way the disk utility has shown that the two discs were fine when I ran first aid.)

  This brings me to assume that the problem is with my Mac mini, which runs at El Capitan and is fully aware of the updates of the operating system.

  Recommendations on next steps to investigate and resolve this problem?

  It seems that your external draws too much power. That shows the report of your system? You have an external power supply for external drive? Have you tried to use all the USB ports on your Mac?

• connect the hard disk drive to airport extreme

  I have Airport Extreme running.

  I have connected a HARD drive to the Airport Extreme, but do not see the device of the HARD drive in the Finder

  How to map iTunes to play music files devices HARD drive to play music?

  The drive must be formatted in FAT16, FAT32 or Mac OS extended (journaled) and may need its own supply. If these criteria are met, use the connection to the server command in the Finder Go menu to access.

  (141910)

• Mac Mini loses the connection to the internal hard drive

  Hello

  I got in trouble once per day or almost one year that my Mini mac interrupts the communication with the hard drive. You can work away and all of a sudden all gel applications. Say, you happen to have a terminal open, if you try to execute commands in / sbin as stop or something like that, it is to say that you don't have access to the files with an error like this:

  bash: / sbin/shutdown: device not configured

  Finally the Terminal Server session freezes as well.

  I used the Apple Diagnostics for all the materials and it test verifies all very well. I bought and installed a copy of TechTools Pro (v8.0.3 build 1967) and he reported no problem whatsoever with everything. To be on the safe side, I replaced the memory, still no luck.

  I've lived a lot of system updates and none of them seem to have solved the problem. I am currently on OS X El Capitan v10.11.5 Beta (15F18c). Yes I know it's beta, but this problem before any release of El Capitan.

  The most reliable way to reduce the appearance of it during my work day is a reboot planned each night. For one reason or another, which reduces the frequency.

  I am at a loss on how to fix this and would appreciate any advice.

  Material is a Mac mini (end of 2012), the processor is an Intel Core i5 2.5 GHz, is now 16 GB 1600 MHz DDR3 memory, graphic is Intel HD Graphics 4000 1536 MB, storage is a 500.11 SATA GB Apple drive ST500LM012 HARD drive

  Thanks in advance.

  Maybe a bad connection tight to the HD. It could be the end of the water which connects to the system board. I had similar symptoms on my Mini 2012 and it is in this regard.  Like you if I stop and then after awhile restarted, it would be OK for a while.

  It could also be a problem with the HD

• Tecra 8000 - how to connect the HARD drive to another laptop?

  Hello, what kind of camera do I need to connect an old hard drive Tecra 8000 to a laptop from another production?

  I want to just transfer some data, but the connector on the Tecra ac no longer works.

  Hello!

  You can use a drive enclosure external DRIVE with USB port for this.
  The external HARD disk enclosure should be for 2.5 s HDD with IDE interface. All that s.

  Contact your local computer dealer. I'm sure they will have these cases.

  Good bye

• Perform a hard reset when you are connected to the computer?

  Hello

  my iPod Touch G 6 seems to have momentarily buggy so I connected it to the computer, after he had died and needed a charge. He didn't start the loading of the iPod screen, so I did a hard reset while it was still connected to the computer. When he turned his back, I had to enter the password on the iPod to unlock the screen before you start synchronizing with the computer.

  Desire to do harm to the iPod? I accidentally unplugged before ejecting several times, so I'm just scared.

  Thank you

  Jesse

  You have no damage to the iPod. If you disconnect the iPod is communicating with the computer, then you can alter the iPod and a restoration will probably be necessary,

• How to connect two external HARD drive satellite and the same printer?

  Hello

  I have now two laptop Toshiba Equium.
  What is the best way to connect them so that they can access the same external hard drive and the same printer?

  Thank you

  Hello

  I guess the two laptops are in the same network; Home LAN or WLan. Right?
  I this case I recommend you connect HARD drive and printer to one of the portable satellite.

  Then you can share the HARD drive and the printer with other cell phones on the LAN.

  You could add the network permission to others, and in this case the other participants of the network would be able to share the printer and HARD drive.

• How can I get my xp computer that relates to the time capsule hard airport to connect to the internet

  My time capsule airport works to my iMac and my Sony laptop win7.

  I also have a windows xp computer that needs to connect to the internet while the airport time capsule hard cable . However, that xp computer seems not to recognize that the capsule exists and cannot connect to the internet. Can someone help me do this work? I'm not fluent in technical aspects of networks and connections. On the Sony, I just had to select the wireless network and put the password and everything was good. With the XP, nothing but problems.

  Help?

  Can your computer XP connect to Internet from other networks or simply not yours? From the description of your problem, looks like a configuration issue with your Windows XP computer and NOT the airport Time Capsule.

  Note: You do now that Microsoft does support Windows XP and that she would run as a potential security risk, especially when accessing Internet with it?

  However, if you still wish to pursue this, you can try the following to help you get started. You can post to a forum of Microsoft support for troubleshooting of networking with Windows XP problems.

  Step 1. Check your network configuration.

  To check the settings of network configuration for the correct IP address information, you can do the following:

  • In the command prompt window, type ipconfig/alland then press ENTER.
  • The results of this command will display a list of IPv4 default gateway addresses (this should be your Time Capsule) and DNS settings for all of your network interfaces (Ethernet, wireless, etc.) By default, your IPv4 address should be something like: 10.0.1.n.; the default gateway address should be: 10.0.1.1. The DNS addresses must match what your ISP provides you.
  • If you get an IPv4 address that begins with 169.n.n.n, then go to step 2 below.

  Step 2. Try to repair the connection.
  Network connection repair feature to renew the IPv4 network connection setting to try to correct the configuration on your Windows XP device issues. To access repair network connection, follow these steps:

  • Click Start, click Control Panel, and then double-click network connections.
  • Right click on the connection that you want to repair and then click Repair. Repair function will perform a number of steps automatically to try to fix the poorly configured settings for your network connection.