Job Manager in the logic of the Web at the domain level

Similar Questions

• Connect to the domain caching / how to enable account lockout

  We have portable computers that normally connects to the AD domain, but must also be able to allow users to log on to the computer when the domain is unavailable for authentication.

  My question is, I want to harden the laptops against the brute force of connection where the laptop was stolen.  Even if we have a policy at the domain level that locks an account after three invalid login attempts, I'm not finding a way to do it with the credentials cached when the computer is not on the field.

  Limiting the number of connections cached does not address this particular situation that I could find - the computer always allows an unlimited number of erroneous assumptions in the password, and after entering the password, the account is connected.

  It is Windows 7 Professional.

  Any suggestion would be appreciated.  Thank you.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Enterprise Manager on the logical standby database

  Hello

  I just put in place a system of logical standby database.

  Is it possible to install the Manager of the business on the logical database?
  Since it works in "read only mode", I'm not sure about this

  Concerning

  Christian

  Enterprise Manager can be used to monitor and manage backup of database, logical and physical targets.

  See you soon,.
  Brian

• Starting the server managed via the Script

  In our environment Windows, we start the servers managed through the Manager of nodes, but one of our requirements must be able to start managed servers when the administrator of the server (server1) breaks down. I found a way to start the servers managed through the startManagedWeblogic scripts, but they all use the default memory, the classpath and the arguments of the default file (assuming that it becomes startWebLogic.cmd and setDomain.env files). My desirable best practice would be to create a separate server for each of my servers managed script and he's ready to run rather than hack the same file and the differences in memory, the classpath and arguments for each server entry. All in the interest of faster availability.
  
  So here are my questions:
  
  (1) I guess I'll make different copies of the startManagedWebLogic.cmd and customize the file for each of them to the memory of managed servers, arguments, and classpath?
  (2) will be customizing all files in startManagedWebLogic.cmd that I copied for each server or the startWebLogic.cmd will changes too? (I assume that anything put in custom scripts startManagedWeblogic.cmd replaces the default values in the startWeblogic.cmd)?.
  
  I found some useful information in the link below, but he starts from the principle that all of your managed servers have the same memory, the arguments of server startup and railways class, which is rarely true world. I thought I had a job and possible response to this to a point, but can't seem to find it. If details or links that anyone can provide that tells me how to crush the default values and the correct file to update and (b) the details in this file on where and how to upgrade the memory, arguments and classpath (a) will be rewarded largely with large amounts of points :)
  
  http://download.Oracle.com/docs/CD/E12839_01/Web.1111/e13708/overview.htm#i1070244
  
  Thank you

  "So should I add all my servers and their USER_MEM_ARGS to the setDomainEnv and then just run the standard not published startManagedWebLogic.cmd one... »

  Bingo.

  "Then, there at - it a way to have him pick up the classpath of managed servers nodemanager uses or edits the file commEnv the only way to do it?

  When you use the scripts such as startManagedWebLogic, the commEnv file is the only way.
  When you need to change the server classpath (and all the server need managed the library), you can just drop the
  jar file in the ${DOMAIN_HOME} directory / lib. Jars placed in this directory is automatically added to the system
  classpath.

  «.. . and dance at your next wedding. »

  For this, I'm going to get a divorce and the invitation will be on your doorstep in a few weeks.

• Satellite A200 - 26 d - error code 19 Device Manager on the USB ports

  I decided to try Windows 7, but the usb ports do not work in Device Manager all the usb root hubs have a yellow triangle and the State of the device says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  I tried to uninstall via the Device Manager and restart the computer and download and reinstall the drivers for vista, because I can't seem to find the drivers for Windows 7, but none of this fixed anything. I was wondering if there was something else I could try or if I could get a link for the correct drivers.

  Hey JP317!

  If it didn t work removing the USB ports in Device Manager and restart the laptop, you should try to update the chipset drivers because they are usually a part of it.

  So check the site Web of Intel for an update and you should also find Windows 7 drivers.

  If you have any other questions, please let us know!

• style of Manager for the field Horizont

  Hello

  A simple but stubborn problem. I want to have a horizontal Manager with both Field.Use_All_Width and Field.Field_HCenter style bits.  I create the Manager in the medium folowing:

  HorizontalFieldManager hfm = new HorizontalFieldManager(Field.FIELD_HCENTER |Field.USE_ALL_WIDTH))
  

  but only styles is considered, depending on whether one is first. The clues why?

  If you set the USE_ALL_WIDTH style bit, the FIELD_HCENTER style is meaningless - how can center you a field that uses the entire width? Maybe you want to center the fields that are added to hfm. If so, this is not the way to do it.

  The style on a field bits are (usually) used by the container Manager to decide how to develop the land. That doesn't change when the field is to be a manager himself. To change the logic of the layout, you must set the style bits of the fields that are added to the Manager.

  Two other points. First of all, HorizontalFieldManager is sensitive to the vertical alignment styles but does not take account of horizontal alignment styles the fields he manages (the converse is true of VerticalFieldManagers). Second, it does not matter what order list you the styles.

  Field.FIELD_HCENTER | Field.USE_ALL_WIDTH == Field.USE_ALL_WIDTH | Field.FIELD_HCENTER

• How to remove vCenter Operations Manager to the extent of consumption?

  Hello

  I imported data from metering 3.3.2 to 3.4. Collection fails:

  'No info extension Operations Manager for xxx.xxx.xxx.xxx vCenter we didn't took a vCenter Server.

  There was a vCops a long time ago, but it has been uninstalled for a long time according to the removal instructions (VMware KB2036389) including the defection of the extension.

  Manage / products a buttons only rebuild and change to vCops, but how can I remove vCops to operate the data collection?

  Note: You mentioned that you had already registered vCOPs/vROPs with vCenter. If this is the case, then you can skip step 1.

  Here are the steps that I followed which allowed me to delete a previously docommissioned vCOPs/vROPs vCLUM server.

  1. make sure that the server vCOPs/vROPs is more entered with vCenter

  • You can check it out and remove manually by following the instructions in this KB article - VMware KB: remove or disable the plug-ins from vCenter Server and vCenter Server Appliance
  • The plugin you are looking for is: com.vmware.vcops

  2. in the portal web vCLUM, click Manage in the top right

  3. make sure that the products tab is selected

  4. click on the checkbox Show inactive

  5. click on the button delete next to the vCenter your old server vCOPs/vROPs was previously attached (you will get a prompt saying that it will not remove the vCenter if he he already asked for data)

  6. Finally, click Activate next to the vCenter.

  I hope this helps!

• Manager on the source db configuration

  Server source 11.2.0.2
  11.2.0.3 downstream server
  Linux 5.6 both servers
  
  I'm new to goldengate and have been training, but not always including a basic configuration problem.
  
  The training covered how to place extract and replicat so I understand we are going enough. However, it was assumed that the two processes run on the source server and target (respectively). In this case, I understand the role of the process manager.
  
  Here's where I'm stuck:
  1. what the Manager process does the source db server when I have a mining downstream server which has a Manager making the extract etc. ?
  2. What can I configure the Manager to do on the server of db source if all of the bulk of the work is done on the server of mining.
  
  I'm not finding anything on the web that explains how this piece of architecture is the installer...
  
  Should I still configure a handler on the server of db source when I implement a server downstream of mines. I'm starting to think not... because I see no explicit documentation on this subject...
  
  Thanks in advance...
  
  Published by: TonyG on 31 May 2013 05:17
  
  Published by: TonyG on 31 May 2013 08:54

  The appendages through the installation requirements.

• Open Enterprise Manager using the browser on Oracle Linux

  I installed Oracle 10 g Release 2 on Oracle Enterprise (version of Enterprise Linux AS 4 (October 7 update)).
  
  I started the listener and enterprise manager using emctl start dbconsole command successfully.
  
  As I am new to linux, I don't know how to open the url EM Linux.
  
  What browser should I use (exact version that is compatible with the version of Enterprise Linux AS 4 (October update 7).) How do I install the browser and open enterprise manager using the browser.
  I don't even know if any browser is installed during the installation of linux. How can I check if any browser installed or not?

  No one can guess what you have installed or how you have configured your system or the installation of Oracle. The default browser for Oracle Linux 4 is Konqueror, which is not compatible with the MS Oracle dbconsole.

  You might want to try the following:

  Open a Terminal command prompt (System Applications/tools) and enter the following command:

  
  
  su - root
  
  cd /etc/yum.repos.d
  
  wget http://public-yum.oracle.com/public-yum-el4.repo
  
  yum -y install firefox
  
  

  To open a Firefox browser window, open the Web icon in the Menu, next to the Actions or the Applications/Internet or type firefox in an X 11 terminal window.

  The default URL for the dbconsole EM is:

  http://hostname_or_ip:5500 / em

• difference between the management of the measure and segment management

  friends, what is the fundamental difference between the measurement and management of the segment, as we know this segment is a collection of extensions so why is this necesassry to handle both?... and what to do?

  Julien Chevallier wrote:
  friends, what is the fundamental difference between the measurement and management of the segment, as we know this segment is a collection of extensions so why is this necesassry to handle both?... and what to do?

  Oracle stores data in its own logical structure.

  Blocks--> measure--> Segment

  Oracle (also known under the name of page) block being the level of granularity where data is stored. To what extent is a collection of blocks.

  When you specify the management of the measure, you mean where the allowance/disable-distribution of scopes (Group of blocks) will be managed (whether in the dictionary or using bitmap images).

  When you specify the management of space segment, you mean that how will be managed within a block space. Extended management does not control the spatial distribution inside the block.

  Kind regards
  S.K.

• Management of the site - a Site within a Site?  CS4

  As a general rule, I can set up a site, but I can't using site management, if I'm trying to set up a site that is located on another site, if you see what I mean?

  I'm using XAMP on my PC.

  I have several sites that I work on and they have their own accommodation, so it's easy.  I have a problem with a new website that I'm developing, and I put it in place in a folder in a site myself for the online test.  DSo my tree looks a bit like this:

  OriginalSiteFolder >

  > OriginalsSiteSubFolder

  > OriginalsSiteSubFolder

  > developingSite

  > developingSiteSubFolder

  index.php

  > OriginalsSiteSubFolder

  > OriginalsSiteSubFolder

  > index.php

  I would like to configure DW so that I can have my site developing in its own space of management of the Site and still have it on my original site.

  This who should I look for?

  Thank you

  Martin

  Dreamweaver you yell at you to define a site within a site, but it doesn't prevent you to do so. The only problem is with the timing of the site, which does not work when the sites are nested.

  However, there is no need to nest sites on your local development computer if you go to separate completely the customer site. All you need to do is indicate the host of your remote server site definition directory in the subdirectory of your own Web site. Dreamweaver is not interested in whether it is the root of the real server; He just wants to know where the root of the site. However, to do this, you use links from the document, no links from the root of the site.

  A longer term solution could be to study the implementation of the subdomains on your site to test customer sites. However, I have never used subdomains myself, so can't help you with that. I'm not sure others have done, however.

• Firefox is constantly stopping, aging, and does not when on the home page yahoo uk, Manager of the tasks is that means to stop it, no event will block

  Latest version of Firefox, keep up to date. 8.1 Windows running on del optiplex 620, 2 GB of ram, 80 GB disk partitioned with Win10 on the other. Panda free av and malwarebytes free running. Never had any problem with Win 8.1 up to now, I have returned to it because of many problems with Win 10. Did you check Event Viewer, nothing, checked for crash report, nothing. No malware not reported. Whenever the only solution is to stop Fox with the Manager of the tasks and then restart when Fox goes back to where she was.

  https://UK.Yahoo.com/ I noticed no problem in the last two sessions, perhaps the problem is resolved, will not display rear reccurrence as appropriate.

• Can I have the Profile Manager uses the name of the device used when the placement of placeholders?

  Can I have the Profile Manager uses the name of the device used when the placement of placeholders? Currently, all get renamed 'iPad' when the device through DEP configuration.

  No, but

  I was putting new devices in groups of temporary devices and renaming in bulk, once they are configured for the user, by using user variables / unit...

  The other annoying problem would be the user modifies the device name when they connect it iTunes...

  • the %destinataire% email - address email (the EMailAddress attribute)
  • first_name % - first name (FirstName attribute)
  • full_name % - full name (attribute RealName)
  • % of guid guid (GeneratedID attribute)
  • last_name % - last name (the LastName attribute)
  • the title of the post (the JobTitle attribute) %

  -% mobile_phone % the number of mobile (laptop attribute)

  • short_name % name run (the RecordName, generally the name of the account attribute)

  The variables of the unit are:

  • % BuildVersion % - full OS version on the device
  • ICCID % - ICCID (from the SIM card)
  • IMEI % - IMEI (International Mobile Equipment Identity)
  • OSVersion % - common version number of the operating system of the device
  • ProductName % - name of the product
  • SerialNumber % - serial number
  • % WIFIMAC %-MAC address of the WiFi interface

• Profile Manager - failed to install the remote access profile in the domain environment & multi-Active Network Directory

  Hi all

  I am a COMPUTER administrator for a college and I am trying to fix what seems to be the last hurdle in getting the Profile Manager works correctly.

  I worked for a while now trying to get the Profile Manager capable of pushing the device and profiles for Mac in our group network environment. I was able to operate intermittently, but not often. Most of the time I'm unable to install the remote management profile.

  When you try to install the remote management profile, I give myself one of the two errors-

  The first error is:

  The Installation of the profile failed.

  The «TeleManagement (com.apple.config. » profile (Server.FQDN.mdm:GUID) "could not be installed because of an unexpected error < MDMResponseStatus:500 >

  (Obviously server.fqdn and GUID are placeholders for their actual values)

  

  The second mistake is:

  The Installation of the profile failed.

  Failed to contact the Protocol SCEP server to ""http://server.fqdn: 1640/CEP / "."

  

  The server Mac OS X 10.11.4 works

  OS X Server is version 5.1

  Client Mac is for most running 10.10.4

  Here's a quick run down on the environment and the steps I have already taken to solve the problem.

  • The network is an Active Directory with several networks multi-domain environment. I mainly work with two different networks, each associated with one of the two areas.
  • The Mac server hosting the Profile Manager is a Mac Pro. The two network cards is used, each on one of the two networks. The Mac server is joined to the domain in the primary forest.
  • I opened all the ports and IP ranges for Apple's Push Notification service for two on our firewall and tested networks between the two networks to ensure that the AFN is accessible.
  • I created a static DNS entry for the server in the DNS zone for the main domain. I also have a separate DNS zone for the DNS record for the interface on the secondary network. I also confirmed that Macs see the correct IP address of the Mac server for their network.
  • I tried to change the settings for network access for the Profile Manager. The first error seems to happen when the Profile Manager are restricted to the network the Mac client is not connected. This same error also occurs if I open Manager profile access to "all networks".
  • I have experiemented with the different certificate types. In general, I use the self-signed certificates that are generated automatically. In this scenario, I install the profile Trust first (which works seamlessly regardless of network or domain). I also tried to use a certificate for Code signing signed with our own CA to sign the profile of remote management. The same errors will occur no matter what certificates are used.
  • The second error occurs when the access profile manager is limited to the same network that is connected to the Mac client
  • I ran Wireshark captures on several client computers, as well as on the Mac server interfaces and haven't seen any traffic blocked or rejected that seemed related to the Profile Manager
  • I've deleted and rebuilt my OD master
  • I also scoured newspapers for clues Profile Manager and haven't found much
  • In addition, I have also studied the problem and error codes/etc widely and have not found a lot of useful information
  • I don't know there are any other troubleshooting steps I took as well, but I've been question bout this for awhile and I don't remember everyone.

  That's a strange thing - I had it working for Mac on the main network and the domain. However, I discovered that the Mac on the secondary network and the field was unable to download the profile of remote management. This is when I started to change the Profile Manager, access network, which eventually introduce the problem on Macs connected to the primary/field of experimentation network. Change access return settings in Profile Manager does not restore functionality for pimps who worked.

  Another thing odd in this test scenario all - Mac on the network high school/area would not install remote profile unless management I temporarily moved it to the main network (I do not untie / reassign to one the main domain on these Macs) I could get the profile of remote management to install and then pushing profiles has worked. Even more strange, it's the Mac that I had to move temporarily secondary network to the main network to allow remote management profile install only works always as long as the Profile Manager are restricted to the secondary network and 'the Mac'. However, Macs in the same room, on the same network in the same field, using the exact image even get the errors described above.

  The only thing I have not yet done is delete/reconstruction Profile Manager. I would really like to avoid this if possible. Solutions that involve something like Casper or other software integration AD for Macs are also a non-starter.

  I'm happy to elaborate if necessary. I appreciate the help.

  Okay, I think I can find the root cause.

  Before this discovery, I had completely rebuilt Profile Manager. Now, I managed by pushing the management profile remote for Mac in the two fields/networks. However, many of them still refuse to install remote management profile.

  Macs who encounter the problem are all were imaged using NetRestore using an image captured from an another similar iMac. IMac even that was used to build the image has now been reassigned in a test of Mac. I found that when you attempt to register one of the Mac who had received this image it shows already as "registered" when you go to "mydevices" on my Mac server. I also noticed that they all have the serial number of the test Mac when viewing their "register". Among the issues of Macs, I activated the lock of the device from the page "mydevices" for the so-called problematic Mac registered (showing the serial number of the iMac used to create the image) and it locked the iMac used to create the image - not the Mac issue.

  This tells me that the CID (or Mac equivalent) is set on the Mac CID used to create the image for all of the Mac said image was deployed to. If it's a Windows box I have a sysprep prior to deployment or could perform a rearm after the fact. I am unaware of how to perform similar functions in OS X.

  I tested also since on some Macs that do not have this image, and they are able to register and install the profile of Managing remotely with success.

  If anyone has any suggestions on how to reset the CID (the computer ID) under OS X, I'd appreciate it. Thank you.

• HP8100 print job stuck in the queue

  I have a print job stuck in the queue of my HP Officejet Pro 8100.  I tried to delete the file, but it's been blocked for a day and I can't print anything else, it seems as if the job locked up in the queue stops other jobs.

  I did the following:

  tried to delete the file-will not remove status said "deletion" for more than a day.

  power cycle

  connection direct USB printer

  power cycle - unplug the power cable, the power button for 1 minute - leaving only machine for 30 minutes.

  Nothing has worked so far.

  Help, please.

  Thank you

  DITT

  Hello

  Try the following.

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K