KB2937610 security update
I reported a problem installing Microsoft .NET Security Update KB2937610. I googled the Microsoft for this particular update of the site and ran a default Windows Locator site transported. It found and resolved three errors, but 0x800F081F(2014-08-15-T-11_31_-25A fault) that he has not solved. However, a screen popped up asking me to close and restart I did. On the closing down and re-departure, the program has been a configuration process, as it would after you install updates. When he finally opened I found that security update KB 2937610 has been installed but shown as pending. What is this average please and what should I do to get the Update Setup to change from pending to SUCCESS. Thank you very much.
Hello LyleGiles,
I'm sorry to know that you are facing problems to install Windows updates.
I would like to know what happens when you try to install the update and is the specific problem of KB2943357?
I suggest that you put the computer to boot, then try to download and install the update to Windows.
A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate the conflicts of software that occur when you install a program or an update or when you run a program in 8.1 of Windows, Windows 8, Windows 7, or Windows Vista. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.
How to perform a clean boot in Windows
http://support.Microsoft.com/kb/929135/en-us
Note: After troubleshooting, see the section «How to reset the computer to start normally after a boot minimum troubleshooting»
Download Service pack 1 refer to the section below.
A security update for Microsoft .NET Framework 3.5.1 on Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1
http://www.Microsoft.com/en-US/Download/details.aspx?ID=43954
Tags: Windows
Similar Questions
-
Can not get the latest Windows 7 security updates
you want to say thank you in advance to anyone who could help me with this problem. I was not able to install the new updates of security, and I don't want to leave my computer in a vulnerable state, so any help is super duper enjoyed.
I have a desktop running Windows 7 Professional 64-bit Service Pack 1. I bought the parts of the computer separately, so it did not come with a pre-installed Windows OS.
Since about two months ago (when I installed Windows), I was never able to find the updates by using Windows Update. It crashes just on the "check updates" screen I have yet to get error messages, it crashes just on this same screen, with the bar that goes from left to right.
After a week or two, I noticed that Windows has not been activated, and all I had to do was re-enter the product key. Now that Windows has been activated, I tried to look for updates again, same thing, it of just always looking for updates without results.
In the Windows Update window, it says:
Final check of updates: never
Updates have been installed: never
You receive updates: for Windows only
I have some important updates, the value "Install updates automatically (recommended)" every day at 03:00.
I have Windows Update Agent 7.6.7600.320, status: success, installation Date: 17.8.2016 (the same day I installed Windows)
2 updates installed: KB976902 (installed on November 21, 2010) and KB2534111 (installed on August 17, 2016)
I searched the internet for possible solutions to the problem, and that's what I've tried so far:
I tried troubleshooting Windows update with the tool in the Control Panel, it hanged on "Check for updates online", so not much luck with that.
Scanned with Avast Antivirus computer a couple of times, has never found a virus.
I downloaded the WindowsUpdateDiagnostic tool and tried, I got the following:
Problems found
Windows Update, error 0 x 80080005 (2016-10-16-T-12_49_06P) is not fixed
Registration for the service is missing or damaged fixed
Fixed problems to install the latest updates
Fixed problems to install the latest updatesAfter that, still can't anything when I try to search for updates in Windows Update.
I tried to download and install KB3172605 from Microsoft Download Center update, I had read that the update was to make the search for updates in Windows Update faster. Download was successful. Then, I stopped the Windows Update Service. When I tried to install, but I was left with an error message saying that the update was not applicable to my computer.
Subsequently discovered on Belarc Advisor, downloaded and ran the program. He tells me that I have a total of 148 updates security missing, here is the list:
Hotfix Id Severity Description (click to see the security bulletin) Q2479943 Not evaluated Notice of security Microsoft (KB2479943) Q2491683 Not evaluated Notice of security Microsoft (KB2491683) Q2506212 Not evaluated Notice of security Microsoft (KB2506212) Q2509553 Not evaluated Notice of security Microsoft (KB2509553) Q2511455 Not evaluated Notice of security Microsoft (KB2511455) Q2532531 Not evaluated Notice of security Microsoft (KB2532531) Q2538243 Important Microsoft (KB2538243) security update Q2560656 Not evaluated Notice of security Microsoft (KB2560656) Q2564958 Not evaluated Notice of security Microsoft (KB2564958) Q2565063 Important Microsoft (KB2565063) security update Q2570947 Not evaluated Notice of security Microsoft (KB2570947) Q2579686 Not evaluated Notice of security Microsoft (KB2579686) Q2585542 Not evaluated Notice of security Microsoft (KB2585542) Q2604115 Criticism Microsoft (KB2604115) security update Q2620704 Not evaluated Notice of security Microsoft (KB2620704) Q2621440 Not evaluated Notice of security Microsoft (KB2621440) Q2631813 Not evaluated Notice of security Microsoft (KB2631813) Q2653956 Not evaluated Notice of security Microsoft (KB2653956) Q2654428 Not evaluated Q2667402 Not evaluated Notice of security Microsoft (KB2667402) Q2676562 Not evaluated Notice of security Microsoft (KB2676562) Q2690533 Not evaluated Notice of security Microsoft (KB2690533) Q2698365 Not evaluated Q2705219 Not evaluated Notice of security Microsoft (KB2705219) Q2706045 Not evaluated Notice of security Microsoft (KB2706045) Q2727528 Not evaluated Notice of security Microsoft (KB2727528) Q2736422 Important Microsoft (KB2736422) security update Q2737083 Important Microsoft (KB2737083) security update Q2742599 Important Microsoft (KB2742599) security update Q2742613 Important Microsoft (KB2742613) security update Q2770660 Not evaluated Notice of security Microsoft (KB2770660) Q2807986 Not evaluated Notice of security Microsoft (KB2807986) Q2813430 Moderate Microsoft (KB2813430) security update Q2840631 Important Microsoft (KB2840631) security update Q2840642 Important Microsoft (KB2840642) security update Q2847927 Important Microsoft (KB2847927) security update Q2861208 Important Microsoft (KB2861208) security update Q2861698 Important Q2862152 Not evaluated Notice of security Microsoft (KB2862152) Q2862330 Important Microsoft (KB2862330) security update Q2862335 Important Microsoft (KB2862335) security update Q2864202 Important Microsoft (KB2864202) security update Q2868038 Important Microsoft (KB2868038) security update Q2871997 Not evaluated Notice of security Microsoft (KB2871997) Q2884256 Important Microsoft (KB2884256) security update Q2892074 Criticism Microsoft (KB2892074) security update Q2893294 Criticism Q2894844 Not evaluated Notice of security Microsoft (KB2894844) Q2894854 Not evaluated Notice of security Microsoft (KB2894854) Q2898864 Important Microsoft (KB2898864) security update Q2900986 Criticism Microsoft (KB2900986) security update Q2901118 Important Microsoft (KB2901118) security update Q2911501 Important Microsoft (KB2911501) security update Q2931356 Important Microsoft (KB2931356) security update Q2937610 Important Microsoft (KB2937610) security update Q2943357 Important Microsoft (KB2943357) security update Q2957189 Important Q2968294 Important Microsoft (KB2968294) security update Q2972100 Criticism Microsoft (KB2972100) security update Q2972211 Important Microsoft (KB2972211) security update Q2972216 Important Microsoft (KB2972216) security update Q2973112 Important Microsoft (KB2973112) security update Q2973201 Important Microsoft (KB2973201) security update Q2977292 Not evaluated Notice of security Microsoft (KB2977292) Q2978120 Important Microsoft (KB2978120) security update Q2978128 Important Microsoft (KB2978128) security update Q2978742 Criticism Microsoft (KB2978742) security update Q2984972 Not evaluated Notice of security Microsoft (KB2984972) Q2991963 Moderate Microsoft (KB2991963) security update Q3004361 Important Microsoft (KB3004361) security update Q3004375 Not evaluated Q3010788 Important Microsoft (KB3010788) security update Q3011780 Not evaluated Notice of security Microsoft (KB3011780) Q3021674 Important Microsoft (KB3021674) security update Q3022777 Important Microsoft (KB3022777) security update Q3023215 Important Q3023224 Important Microsoft (KB3023224) security update Q3030377 Important Microsoft (KB3030377) security update Q3033889 Criticism Microsoft (KB3033889) security update Q3035126 Important Microsoft (KB3035126) security update Q3037574 Important Microsoft (KB3037574) security update Q3037581 Important Microsoft (KB3037581) security update Q3042553 Criticism Microsoft (KB3042553) security update Q3045685 Important Microsoft (KB3045685) security update Q3046017 Important Microsoft (KB3046017) security update Q3046269 Important Microsoft (KB3046269) security update Q3055642 Important Microsoft (KB3055642) security update Q3059317 Important Microsoft (KB3059317) security update Q3060716 Important Microsoft (KB3060716) security update Q3067903 Important Microsoft (KB3067903) security update Q3071756 Important Microsoft (KB3071756) security update Q3072305 Criticism Microsoft (KB3072305) security update Q3072630 Important Microsoft (KB3072630) security update Q3074230 Important Microsoft (KB3074230) security update Q3074543 Important Q3074550 Important Microsoft (KB3074550) security update Q3075220 Important Microsoft (KB3075220) security update Q3076895 Important Microsoft (KB3076895) security update Q3080446 Criticism Microsoft (KB3080446) security update Q3084135 Important Microsoft (KB3084135) security update Q3086255 Not evaluated Notice of security Microsoft (KB3086255) Q3092601 Important Microsoft (KB3092601) security update Q3093513 Criticism Microsoft (KB3093513) security update Q3097989 Important Microsoft (KB3097989) security update Q3097996 Important Microsoft (KB3097996) security update Q3098781 Important Microsoft (KB3098781) security update Q3101722 Important Microsoft (KB3101722) security update Q3108371 Important Microsoft (KB3108371) security update Q3108381 Important Microsoft (KB3108381) security update Q3108664 Important Microsoft (KB3108664) security update Q3108670 Criticism Microsoft (KB3108670) security update Q3109094 Criticism Microsoft (KB3109094) security update Q3109103 Important Microsoft (KB3109103) security update Q3109560 Important Q3110329 Important Microsoft (KB3110329) security update Q3115858 Criticism Microsoft (KB3115858) security update Q3122648 Important Microsoft (KB3122648) security update Q3123479 Not evaluated Notice of security Microsoft (KB3123479) Q3124275 Criticism Q3126587 Important Microsoft (KB3126587) security update Q3127220 Important Microsoft (KB3127220) security update Q3135983 Important Microsoft (KB3135983) security update Q3138910 Criticism Microsoft (KB3138910) security update Q3139398 Important Microsoft (KB3139398) security update Q3139914 Important Microsoft (KB3139914) security update Q3139940 Important Microsoft (KB3139940) security update Q3142024 Important Microsoft (KB3142024) security update Q3146706 Important Microsoft (KB3146706) security update Q3146963 Criticism Microsoft (KB3146963) security update Q3149090 Important Microsoft (KB3149090) security update Q3150220 Important Microsoft (KB3150220) security update Q3155178 Criticism Microsoft (KB3155178) security update Q3156016 Criticism Q3156017 Important Microsoft (KB3156017) security update Q3156019 Criticism Microsoft (KB3156019) security update Q3159398 Important Microsoft (KB3159398) security update Q3161561 Important Microsoft (KB3161561) security update Q3161949 Important Microsoft (KB3161949) security update Q3161958 Important Microsoft (KB3161958) security update Q3163245 Important Microsoft (KB3163245) security update Q3164033 Important Microsoft (KB3164033) security update Q3164035 Important Microsoft (KB3164035) security update Q3170455 Criticism Q3177186 Important Microsoft (KB3177186) security update Q3184122 Criticism Microsoft (KB3184122) security update Q3185911 Important Microsoft (KB3185911) security update Q3188730 Important Microsoft (KB3188730) security update Q3192391 Criticism Microsoft (KB3192391) security update Can I download and install these updates manually using Microsoft Download Center? If possible, in what order should I install them? Are there any updates in the list that I have no need to get, or updates that should be included in the list? Y at - it updated I could get that would speed up the process of search for updates in Windows Update?
How long can it take to find 100 updates + I need help from Windows Update? A long time I've tried have Windows Update check for updates was like 10 hours, without results. Is it worth trying to leave to search for days even? Also can I disable my firewall and antivirus during this time, or is it too risky? I am reluctant to do it, because I SLEEP in the same room as my computer is in (and the cpu fan can get really loud).
One thing that I thought about just today is that I always shut down my computer at night. Since updates are planned to install at 03:00 in the night, interrupting this process by stopping the computer down every night? Should I try to simply put it to sleep instead, for a few nights?
We appreciate once again, if anyone can suggest what to do in this situation. Responses from anyone who has had the same problem and managed to resolve it might also be useful!
Thank you!
Windows 7 update problems? First read this.
:)
2016-001 security update restart blocks iMac
This is an iMac of 2013 end on OS X 10.11.6. Installation of security update 2016-001 10.11.6 requires a reboot. The iMac freezes on the restart with a black screen showing a cursor sensitive but do not restart. Is the only alternative to the power of the machine cycle. I downloaded and reinstalled OS X 10.11.6 on the App Store. After installation, restart in the Apple menu has worked very well and directly for 3 restarts successfully. I then tried again to install the security update. When he initialled the reboot, the machine hung up again as previously described. I have power drove the machine and after reboot, restart from the Apple menu has failed, resulting in the same shot on reboot as described above - black screen, sensitive cursor.
The machine runs an i7 processor at 3.5 GHz with 16 GB 1600 Mhz DDR3 RAM and a 256 GB SSD.
Any ideas on how to solve this problem would be greatly appreciated.
TIA,
John
If the problem is still there, try to start safe mode using your usual account. Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once. If it works, try to rerun the update from the drop-down list. If it is successful, use the link below for the security update.
September 1, El Capitan security update caused problems for everyone?
Ghost security update (Wednesday) since the restart I can not save pictures from the web... Help?
Yesterday (Wednesday 8 September), I checked my desktop App Store for updates. There were three updates ' Collage 3 3.6.0, GIPHY capture version 2.4 version and an update of security of El Capitan. I've updated. The day applications. The computer is restarted.
Since this restart
• I can't pull images from the Internet on the desktop.
• When I try to type in a browser's address bar, TextEdit, twitter Notes when you press the SPACEBAR, the cursor jumps to the application. to another folder in a window to open files by clicking on the new space bar opens a dialog box containing the details of the case. After that clicking on open and closed space bar folder (if there is no file open window, hit the space bar when typing does not she jumps off the typed text box.
• Security and privacy / general when I click the lock to make changes. It opens and the user name / password permissions I clique (blue) sounds a release button click, the security and the confidentiality of the dialog box flickers then without effect, the lock is not unlock.
Tonight, I checked App Store: updates in the last 30 days there is no security updates listed.
How can I solve my problems?
Anyone who has met by a ghost security patch in the App Store?
System: OS El Capitan
10.11.6 version
Macintosh: MacPro (early 2009)
Processor Xeon 3.33 GHz 6-CoreIntel
Keyboard: Keyboard with numeric keypad - English International wired Apple matching the magic trackpad.
* With the help of a Mac in isolation. Assistance mac, near Wexford, in Ireland. I am my COMPUTER service. Hoping someone can shed some light on my problems. I have found no mention of anyone else having similar problems when I google my problems. I use Mac since the end of the 1980s (obviously not the one above although I have a Macintosh SE working group.)
Thanks in advance for your help.
A few moments ago, I found this on the apple [dot] com/en - that is to say/HT207130 :
The content of security Security Update 2016-001 El Capitan and security update 2016-005 Yosemite
This document describes the security content Security Update 2016-001 El Capitan and security update 2016-005
Released September 1, 2016
Kernel
Available for: v10.10.5 OS X Yosemite and OS X El Capitan v10.11.6
Impact: An application may be able to reveal the kernel memory
Description: A validation problem was addressed through better disinfection of entry.
CVE-2016-4655: Citizen Lab and Lookout
Kernel
Available for: v10.10.5 OS X Yosemite and OS X El Capitan v10.11.6
Impact: An application may be able to execute arbitrary code with the privileges of the kernel
Description: A problem of corruption memory was sent by the improved memory handling.
CVE-2016-4656: Citizen Lab and Lookout
2016-001 El Capitan's Security Update and security update 2016-005 Yosemite include security of safari content .
PS: Safari did not work properly on the Mac since we last updates of Yosemite.
Thank you for using communities of Apple support, Deirdre-2D!
It seems that you encounter several different questions since Wednesday last on your Mac Pro. Let's see if we can get these cleared up for you. Test questions you mentioned having tried every troubleshooting step. Don't hesitate to jump steps you have already tried, but let me know?
1. your Mac hard drive backup - before you start troubleshooting procedures, I always recommend a fresh backup. It is preferable "to have" one the "need."
2 try safe mode if your Mac does not start -even if your Mac starts, which makes sure it starts successfully.
3. How to test one question in another user on your Mac account - this will help determine if the questions are found in all your user account or if they are systemic.
4. on the recovery of OS X - if you're still with these problems, reinstall the operating system on your Mac.
Have a great day!
security update 2016-001 crashes
Hello
This morning, I tried to install the security update 2016-001 el capitan. Installation hung. It is in 'one minute' now for nearly two hours.
The machine is an iMac 27 mid-2011 "
If I have to hard start, which will be screwed up? Can I go back to a working state?
Paul
I had the same problem. I rebooted and it was a normal start. I went to the menu with the option/alt key is pressed and ran system information. The update has not been installed. I downloaded from the link below and installed successfully.
File server for Windows does not work after security update
I just upgraded the security update that was released last week and all of a sudden the computers windows cannot access the server. I'm under 10.11.6 and everything was great until we started windows computers today. They can ping and access the internet, but they cannot access SMB on the server.
Macs have no connection problems in the SMB and AFP.
Any ideas, what has changed? Users of server are all still there and it seems like it should work. I can access the web page of servers too.
Make sure you are including the domain in the user name when signing in. for example USER: groupe_travail
Also, check that your windows machine has the correct set of LM compatibility level. For El Cap servers must be set to 3.
Follow the instructions below to change the Windows security settings to allow Windows SMB connections.
- Click on the Start button and in the bottom search bar, type regedit . Select search results regedit and the registry opens.
- Using the folders on the left side of the screen, navigate through the tree to the following location: \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
- In the right window, find the following DWORD value: LmCompatibilityLevel . If it exists, double-click it and set the value to 3 (in decimal). If it does not exist, right-click in an empty space in the right part of the window and create a new DWORD value called LmCompatibilityLevel and set its value to 3 (in decimal).
- Restart the computer.
- Re-try to connect to the server via the workstation.
NOTE: The versions Home of windows may not the ability to set the LM, and unfortunately I have not found a way around that.
I can't get the last security update for download. I have Adblock and screen saver have stopped, but in vain.
Try to download it from the link below.
This update (Security Update 2016-001 El Capitan and security update 2016-005 Yosemite) broke my iMac. I had to restore from Time Machine 2 times!
Please correct this update security update 2016-001 El Capitan and security update 2016-005 Yosemite.
My screen freezes during my login on my i - Mac!
I tried 2 times with the same result. Restored my i - Mac 2 times!
My iMac after this update of market with gray screen too, very bad update in safe mode.
Security update 2016-001 vs MacBook Pro mid-2012, using external SSD
Hello
The 2016-001 security update progress bar went to 25 days and then reduced back to "less than a minute" but seems stuck on 88.1 MB 414MB. I am currently using an external SSD (HARD following internal disk failure), but everything else seems to work well following a resumption of Time Machine on the SSD. Any ideas?
See you soon
Updated - now 173 MB 414 MB and 32 minutes!
don't restart after 2016-001 10.11.6 security update
I've updated a security update today 2016-001 10.11.6 as my computer does not, restart a few visits on this page
Shut down the computer using the power switch, and then restart. After the restart, hold down the option/alt key while clicking on the menu and select system information. Refer to the Installation section to see if the update has been installed. If this is not the case, use the link below to download the update. This happened to me when I tried to install it.
iMac does not start after the last security update
Hello
After the last update my iMac (late 2009, El Capitan) does not start.
The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.
Does anyone have any advice for me?
THX
INTELLECTUAL PROPERTY
a solution that helped me:
Security update causes damaged Apps
I installed the security update on my iMac at work and my MacBook Pro this morning (September 2, 2016). The MacBook Pro has no problems, but the iMac is in trouble. It restarts after installing the update and drops on the desktop, but it won't be open requests, saying they are damaged or incomplete. The viewfinder is VERY slow, taking a few seconds to open the windows. Is there a way I can reconstruct something to find my feature?
I'm scrolling my Applications folder and all icons are generic. I can't start anything.
Hello! After the installation of Security Update 2016-001 El Capitan this morning, a couple of my apps usual crash at the opening. This includes Fade In and QuickTime Player 7. The headers for errors are included below. I rebooted and reinstalled both apps. Not sure if the crash report information would be helpful, but I've included the two headers below. Thanks for your help!
Process: QuickTime Player 7 [1668]
Path: / Applications/Utilities/QuickTime Player 7.app/Contents/MacOS/QuickTime Player 7
ID: com.apple.quicktimeplayer
Version:?
Generation information: QuickTimePlayer-17090000 ~ 1
Code type: X 86 (native)
Parent process:? [1]
Responsible for: QuickTime Player 7 [1668]
User ID: 501
Date/time: 2016-09-02 09:09:24.804-0400
OS version: Mac OS X 10.11.6 (15-1004)
Report Version: 11
Anonymous UUID:
Time since started awake: 2800 seconds
Integrity of system protection: enabled
Crashed thread: 0
Exception type: EXC_BAD_ACCESS (SIGSEGV)
Exception codes: KERN_INVALID_ADDRESS at 0x00000000207818cd
Note the exception: EXC_CORPSE_NOTIFY
Process: Fade In [1689]
Path: / Applications / bland In.app/Contents/MacOS/Fade in
ID: com.generalcoffee.fadein
Version:?
Code type: X 86 (native)
Parent process:? [1]
Responsible: Fade In [1689]
User ID: 501
Date/time: 2016-09-02 09:11:11.821-0400
OS version: Mac OS X 10.11.6 (15-1004)
Report Version: 11
Anonymous UUID:
Time since started awake: 2900 seconds
Integrity of system protection: enabled
Crashed thread: 0
Exception type: EXC_BAD_ACCESS (SIGSEGV)
Exception codes: KERN_INVALID_ADDRESS at 0x000000002081c8cd
Note the exception: EXC_CORPSE_NOTIFY
Hello JMG114,.
You forgot the most important parts of these two incident reports.
Where the 10.11.6 2016-001 security update - download links?
Where is the 10.11.6 ('El Capitan') 2016-001 security update - download links?
On the App Store.
Open the App Store, and then select the updates at the top of the menu in the window of the App Store.
Firefox ESR 31.0 is still supported? Can we still have critical security updates for this version?
We would like to know if Firefox ESR 31.0 is still a supported version. If this isn't the case, then it is always possible to obtain critical security updates for this version? When this version is full not taken in charge or the end of life?
31 Firefox. 8.0esr was the last 31 update of esr and EOL with no more updates since the release of 31.8.0esr back on 2 July.
The current ESR is based on 38 Firefox and is at version 38.4.0esr, which was released when Fx 42.0 was released.
Maybe you are looking for
-
Is it necessary to touch 3D notifications in the notification Center to open it?
It's annoying notification 3D touch to open, 5 can be just typing?
-
Satellite Pro A100 - after installing XP I can't work
Hello I reformatted the satellite Pro A100 PSAA3E and Windows XP SP3. I'm not all the sounds to work on the laptop.I tried to uninstall and reinstall the drivers from the Toshiba site, but no luck. Any ideas how I can get this problem resolved? Thank
-
Compaq Presario CQ57: Compaq Presario CQ57-339WM disabled bios password system
Compaq Presario CQ57 System disabled, code 53911905. Any help appreciated greatefully.
-
The paperclip on my e-mail icon is very feint and does nothing when I click on it to try to fix something. Help!