Keep Vista is arrΩt auto Plug & Play and DCOM Server process Launcher service end erors.
I have made many controls of virus and can't find anything. What can I do else? I have this experience also in safe mode.
Hello
Follow the steps here
Tags: Windows
Similar Questions
-
1 error windows must now restart because the plug-and-play service terminated unexpectedly
error 2 - windows must now restart because the DCOM server process Launcher service terminated unexpectedly
-every half an hour or 45 minutes such error comes and restarting the laptop... How to solve this problem...Hi nevil.fidelis,
This seems to be a common problem, I recommend you to follow the discussions below and check if it helps.You can follow the procedure posted by Bindu RMicrosoft support, Moderator on Sunday, 24 January 2010, at 20:04.
http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/ea20a793-5fe8-4448-9fa2-c3ef45069b87For additional help please refer to the following thread also:
http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818You can also check the positions of the TCD in the thread below on
http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/0f1a049c-4852-4321-91d7-dc1255f4d7a4
Consider the response posted by Karena R, Moderator Thursday, December 31, 2009 at 01:28
http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
I'm out of ideas
Hi Esailing17,
Try the following methods.
Method 1
Perform a virus scan online on your computer.
http://www.Microsoft.com/Security_Essentials/
Method 2
Step 1
Check if the DCOM Server process Launcher service is running on the computer. You must be logged on as administrator to perform these steps.
1. open Administrative Tools by clicking the Start button, then Control Panel. In the search box, type Administrative Tools, and then click Administrative Tools.
2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3 right-click the DCOM Server process Launcher service and then click Properties.
4. under the tab general , next to Startup type, make sure that Automatic is selected.
5. If the service is not already running, under Service status, click Startand then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
If fails it step above, I suggest you check the event viewer to determine the cause and after return with accuracy of event viewer.Step 2
1. open event Viewer by clicking the Start button, click Control Panel, clicking system and Maintenance, clicking Administrative Tools, then double-click event Viewer . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. click on a journal of the events in the left pane.
3. double-click on an event to view the details of the event.What are the information in event logs? (Event Viewer)
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-event-viewer Try these steps and let us know the result.Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
DCOM Server process Launcher / Plug and Play question
I noticed that since the upgrade to Windows 7 Ultimate, there was a svchost process that AT all times takes 25% of my processor. The process host DcomLaunch PlugPlay and power. I have turned off the power using Selective startup, but one or two of the other is causing a problem. It also seems that my audio suddenly does not work because of the "RPC server is unavailable." No one knows why this is happening, or has a fix for this?
For any question on Windows 7:
http://social.answers.Microsoft.com/forums/en-us/category/Windows7
Link above is Windows 7 Forum for questions on Windows 7.
Windows 7 questions should be directed to / stationed there.
You are in the Vista Forums.
See you soon.
Mick Murphy - Microsoft partner
-
NT Authority/system DCOM Server process Launcher keeps restarting my computer
I get the following message and then my computer stops and restarts. Every few minutes it.
The system shuts down. Please save all work to process and log off (which it does allow me to do so). All unsaved changes will be lost. This shutdown was initiated by DCOM authority NT Server trial service launcer ended unexpectedly.
CAN ANYONE HELP?
I recently got this and it is now not even let me access the the Task Manager or basically anything on my computer. I am currently in safe mode and scan is useless, because they say that it is clean. I had a chance to open the Task Manager and my computer was running at 100 + treats most of them being rundll32.exe, drwtsn32.exe, and many others which ends in 32.exe. someone please help
Well unfortunately all this time later I discovered that I had picked up a root kit. Finally, it crashed my machine and makes it useless. This is what must have caused it. Virus scanners could not see -
I get the same exact error messages, they began yesterday and my laptop is close and restart on every 20 minutes with error message appearing before having disconnected. I've tried everything that microsoft offer and still the error message appears, one got a help or advise, help please its makes me the walls of the
Hi Williams,
Are a. When you facing this problem?
B. recent changes made on the computer?
Let us try the following methods.
Method 1
Do a virus scan online on your computer. You can do a scan of PC security by clicking on the link http://onecare.live.com/site/en-us/default.htm and clicking on the analysis of a complete Service and accept the contract of
Method 2
Perform a system restore. http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
Method 3
Try to check if the DCOM Server process Launcher service is running on the computer.
You must be logged on as administrator to perform these steps.
1. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3 right-click the DCOM Server process Launcher service and then click Properties.
4. on the general tab, next to startup type, make sure that automatic is selected.
5. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
If fails it step above, I suggest you check the event viewer to determine the cause and after return with accuracy of event viewer.1 open Event Viewer by clicking the Startbutton, click Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click eventViewer . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. click on the event log in the left pane.
3. double-click on an event to view the details of the event.What are the information in event logs? (Event Viewer)
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
Reference:
http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hi Warrtime63,
Let us try the following methods.
Method 1
Do a virus scan online on your computer. You can do a scan of PC security by clicking on the link http://onecare.live.com/site/en-us/default.htm and clicking on the analysis of a complete Service and accept the contract of
Method 2
Try to check if the DCOM Server process Launcher service is running on the computer.
You must be logged on as administrator to perform these steps.
1. open administrative tools by clicking the Start button, then Control Panel. In the search box, type Administrative Tools, and then click Administrative Tools.
2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
3 right-click the DCOM server process Launcher serviceand then click Properties.
4. on the general tab, next to Startup type, make sure that Automatic is selected.
5. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
If fails it step above, I suggest you check the event viewer to determine the cause and after return with accuracy of event viewer.1. open Event Viewer by clicking the Start button, click Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click Event Viewer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. click on the event log in the left pane.
3. double-click on an event to view the details of the event.What are the information in event logs? (Event Viewer)
http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
Reference:
http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818I hope this helps.
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
Inspiron 537 intel core 2 quad processor q9400 (2.66ghz1333mhzfsb) w/6 MB cache 800 mhz ddr2 2dimm 750 drive memory4gb hard nvidia ge force 9800 gt 512 MB gddr3 graphics card g card system windows vista Home premium
do you have your suggetions not always some good if you or someone to think about anything else thanks to all
-
See questions of title.
If you mean Microsoft Outlook...
Please repost to the Microsoft Office Outlook forum:
http://answers.Microsoft.com/en-us/Office/Forum/Outlook?page=1&tab=noIf you mean Windows Mail...
Please repost in Windows Vista, networking, email and online
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking?page=1&tab=noIf you mean Outlook Express...
Please repost on Windows XP, networking, mail, and Getting Online forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking?page=1&tab=no -
no desktop background and dcom shutdown and plug-and-play stop messages
For about a month now, I have had no splash screen. I'll have to use the Task Manager to actually use my pc that is not too much a problem just annoying really, but then for the past days, windows has been close specifying a stop plug-and-play message or dcom. I went in administrative tools and services and tried to fix it but didn't work. I'm completely computer illiterate, so if someone can help please be understanding with your answer and use plain English please!
Hi nikkianddave
Have you installed new software until you have encountered the problem of funds? Since then, did you install any new updates MS or applications? Is updated your Anti Virus?
Try these steps and check:
Step 1: Perform a clean boot and see if the problem persists.
Step 2: Try to start the DCOM Server process Launcher service & Plug-and-Play.
Please follow the instructions below and the service that precedes the value Automatic.
1) click the Start button and in the search box, type in: Services.msc
2) press "Enter" to open the Services window.
(3) find a list of related services above and verify the status and Startup Type.
4) double-click the service to change the status of started and set the startup type to automatic.
Step 3: For the desktop no problem you can try to set the default value for the parameter of the windows interface:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. How to back up and restore the registry in Windows
In the Windows registry (open 'regedit') and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\winlogon\Set variable "Shell" = "Explorer.exe" without the quotes.
Also refer to:
After back and let us know if it helped to solve your problem.
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Why is compatible windows 7 with Medal of honor alied assualt and assualt pacifc and airborne, but not with Medal of Honor 10eanniversaire Bundle. and have xp and windows 7 can I play and keep the games on xp with windows 7 is installed
Hello
Welcome to the Microsoft answers site.
By design, the game is not compatible with windows7.
You can also check with the manufacturer of game for any version upgrade of this game, which could be compatible with windows7.Yes, if you have the dual operating system on your computer, you can play and record games on xp, start the computer in Xp and you can play the game.
I also invite you to visit this link to learn more about running the old programs/games in xp or vista compatibility mode.
Here is the link:
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsLet us know if you have any questions.
Thank you and best regards,
Azam - Microsoft technical support. -
Plug-and-Play and DEP stop computer
Randomly, my computer tells me that there was a problem with the Plug-and-Play and Data Execution Prevention must shut down and restart windows. This happens everytime I turn on my computer in 10 minutes, even if I do not open a Web page. I ran scan from Microsoft, Windows Defender, and Norton Antivirus. No virus or detected problems. This just started 3 days ago. I have not recently downloaded any new program. Does anyone know how to fix this?
Hello
You could try a system restore before it starts HOWEVER I wouldn't back to. better to solve
the question because if you perform the restore you may lose the changes you have made and the problem is likely to
come back. The onlyreason I mention this so that you know the possibilities if someone else
He suggests here or via other communications you might try. System Restore is ok on some points, but
last resort for this one.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
EricLaw IEInternals - a peek at Internet Explorer from inside. -Understanding DEP/NX
http://blogs.msdn.com/ieinternals/archive/2009/10/10/understanding-data-execution-prevention-crashes-in-IE8.aspxThe problem might actually be an add-on or another program to the origin of the problem and you should check that
1st.What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER on it
machines, including those that you have uninstalled (they leave leftovers behind which can cause strange problems).You said Norton and it could well be part of the problem. You others have on this machine EVER?
(Windows Defender and MRT Scanner are fine).Start - all programs - Accessores - system tools - IE with no Addons - does this work better?
IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK
IE - Tools - Internet Options - Security - reset all Zones by default level - apply / OK
not better?
Close IE and try again IE or IE with no Addons
IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
"(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
are bad, but some can cause your question. (Toolbars are BHO)
http://securityxploded.com/bhoremover.phpStartup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAlso get Malwarebytes - free - use as scanner only. If you ever suspect malware, and it would be
unusual with Prevx market except for an occasional cookie of low level (not a big deal), update it, then
run as a scanner.I would add prevx so.
Prevx - Home - small, fast, exceptional CLOUD free protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp-------------------------------------------------------------------
Do yourself a big favor and work through 1 above.
How control DEP but I don't recommend turning it off and certainly not to let power off.
How to enable DEP on or off for a program under Vista
http://www.Vistax64.com/tutorials/65790-DEP-turn-off-programs.htmlHow to enable or disable DEP in Vista
http://www.Vistax64.com/tutorials/120778-DEP-enable-disable.html====================================
If nothing else works you can try this however I would use as a last resort.
IE - Tools - Internet Options - Advanced Options - Security Section - clear the check box enable memory Protection to mitigate
Online - APPLY - OK attacks close and restart IEI hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Vista Media Player 11 won't play slowed down.
Vista Media Player 11 won't play slowed down. The controls on the tab improvements to play speed settings do not meet. Any suggestions?
Hello
- Are you able to see the silder on Windows media player?
This function will work only when you play the music.
Some files are supported the display of an image at a time.
- Play the video file.
- Click the arrow below the now playing tab, point to enhancements, and then click play speed settings.
- In the enhancements pane, click the button of the next improvement until play speed settings is displayed.
- Do one of the following:
- To move the video image of an attacker, click the next picture button.
- To move the video image of a backward, click the previous frame button.
- To return to normal speed, click Normal.
- To hide the settings, click the close button in the enhancements pane.
This should solve your problem.
-
Plug & Play does not work - cell HP Pavilion dm4 - Windows 7
These three issues all occurred as soon as I uninstalled Norton (demo of limited duration which came with my PC) and installed AVG. I think they are all symptoms of the same underlying issue.
1. the popup saying "no amd graphics driver is installed or the amd driver does not work correctly.
2. device Manager is empty.
3. connect & Play will not find my scanner (who worked previously).
I searched using Google and found a number of indications, which neither help my PC: making sure plug & play service is running (it is); changing permissions with Regedit (even the user Admin is said that they do not have the authorization).
I asked AVG support for advice, and they blame Norton (well, they would say who they don't?)
Any ideas?
If you start in safe mode with networking, is still a Virgin in the Device Manager? This can be done in turn on/off the system by pressing F8 about once per second to get the safe mode option.
Is there a restore point before problems happen? If so, restore to that date. Once restored, run the Norton removal tool to Norton is removed (a system restore will most likely restore any software who was present at that date) then note whether the issues are present before installing AVG.
Let me know what happens.
-
Recently, MS windos XP sp3 fails to recognize the common plug & play devices. Says error message "software not signed" then demand load anyway?... I say yes, but the charger just an infinite loop, preventing the drivers to load.
MS refuses to load software for printer Plug & Play, [Kodak ESP7] and Viewsonic monitor. MS = unsigned. Was the load ok previously.
This is how I have to upgrade? I have five computers and two are 98 and 95 for some software. That line. TonyR
The signed data are perhaps crushed or damaged on the HARD drive.
Hello
See this Microsoft KB article and check if that helps.
How to troubleshoot unknown devices listed in Device Manager in Windows XP
http://support.Microsoft.com/kb/314464
When you install a device driver and Windows detects that it is not digitally signed, you receive a warning message and the option to cancel or continue the installation this message only appears if your computer is configured to display a warning message whenever an installation program attempts to install a device without a digital signature driver.
Note A device driver is signed digitally can still be listed as an unknown device in Device Manager.
For more information about driver signing for Windows, see the Microsoft Web site at the following address:
Maybe you are looking for
-
You can connect a Mac Mini to a 2 year old iMac?
You can connect a Mac mini to an older iMac?
-
Unable to send or receive files or photos on Skype.
A month ago I started having errors when I tried to upload the photo. It looked like some sort of link to Skype and something did not exist. My son sent me a file a few days ago and its just opened and never downloaded. Everything else works fine. I
-
HOW TO SORT THE PROBLEM OF COLOR GRAPHICS ON WINDOWS XP
I have a problem getting the color in the window Xp sp3 using microsoft office by adding any character color and recently I installed Trend Micro antivirus for my computer in which Trend Micro security agent page display no color at all.
-
MSoft says; Some updates could not be installed... Office 2003 (KB907417) & (KB2586918)
Hello... My laptop restarted in April in South Africa that almost corupted as my OS etc. and I suspected was installed on the top of my friends, without uninstalling mine... I have almost stopped by MSoft until I proved the validation... I could neve
-
Network with wireless bridge and Repeater cable
Hello I'm about to set up a network composed of 3 routers. The first router R1 is in the basement of my house, the second router R2 is on the first floor and the third router R3 is on the second floor. My goal is to have a single network in the House