Keithley 23xx cannot get driver to work

Similar Questions

• A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

  A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

  Means generally that you're trying to work on a layer locked.

• Satellite L45-S7419 - cannot get device WLAN working for XP

  Hello all and ty in advance for anyone who can help.

  I have a serious issue that I have not been able to understand and finally just abandoned.

  My father has a Satellite L45-S7419 which has wifi 802. 11 b/g, built in at Bestbuy which came with Vista there is quite some time and I finally had the time to put XP on it (which, in itself, was a challenge) and I am unable to get drivers that work with the built-in Wifi.

  In Device Manager, it shows the device with a yellow "?" and no driver installed. Unfortunately, Toshiba has no drivers for XP, but fortunately (I thought at the time) realtek had drivers for RTL8187B. Who called on the site - (RTL8187B driver auto Installer Windows (Win2K/WinXP/Vista support), Win2K/WinXP/Vista driver ver.1158 1158 20/11/2009)

  I installed the drivers, but the device is not simply either recongize or it some how is not the correct drivers, because the appliance does not work.

  Does anyone have an idea what I can do? I tried everything that I can with my knowledge. I tried another way to install and uninstall the device first Manager device, installed the drivers then that the "new Device Manager" jumped upward and the device of RT8187B popped up, but still get the "new hardware found" and the right afterwards "the unit works may not properly" or something similar. As if I had just install the driver itself.

  Any help would be appreciated wildly. Ty!

  Hello

  Have you checked if the WLAN function is? Therefore, you can use the switch of hardware on the laptop and the combination FN + F9.
  Check this box!

  Can you also tell us what version of BIOS is installed on the laptop? In your case, I'd install the latest version of the BIOS. Sometimes, I could here it solves different problems WLAN. It s worth a try! ;)

  I think that, in the worst cases, you must use the preinstalled operating system (Vista). There are all the drivers and tools pre-installed so I m asking you to install another OS. Now, you need to install a large number of drivers and you must spend a lot of time for that so I always prefer the preinstalled operating system.

  Welcome them

• Cannot get bluetooth to work on my Qosmio F10

  Hi, I have a Qosmio F10 but can't seem to use the bluetooth devices. When I went in the bluetooth devices Manager and tried to add a new device, said bluetooth was off and then I went in an another bluetooth application and who says it could not load the bluetooth startup file (although when I checked, it was on the computer).

  Stupidly, I then installed something called Bluetooth Monitor 2 but this actually took away all bluetooth files and I could not find the bluetooth manager plus. I uninstalled this Bluetooth Monitor 2 but still can't find the old files.

  I was wondering if someone could help? I realize it's a guy very newbie Q but I hardly ever use my laptop and can get the bluetooth works fine on my desktop.
  Any help would be greatly appreciated.
  Thank you

  Hello

  I do not know what F10 you have exactly, but as far as I know that some of them are without Bluetooth. Each unit with BT has a Bluetooth key in the lower corner.

  Also check this please page http://aps.toshiba-tro.de/bluetooth/.

  Good bye

• HP designjet T120 24 inches: cannot get driver

  I bought a new printer, but I can't install driver; DVD seems doesn't work well according to the manual.

  I downloaded the file win - x 64-pcl3 - drv.exe, then I click on it, but it does not install the driver. He opens the winzip self extractor and the unzipped files are not the .exe

  You use the printer to add and when you get to the manufacturers page navigate you to where to find the files and you have unzipped.  If the wired network, find the ip address of the plotter, then use to add it printer, the local printer, create port in the menu dropdown, choose standard tcp/ip and then just follow the instructions and enter the requested information.  If you use the found new hardware usb should appear and when the computer application the driver, point where these files are located.

• Satellite Pro P300-1EC - cannot get wireless to work

  Hello!

  First of all. Excuse me for my English!

  TEC Spec.

  Toshiba Satellite Pro P300-1EC
  Intel WiFi Link 5100
  Windows XP Pro SP3

  I have a big problem. I can't get the wireless LAN working properly.
  And the customer has purchased this computer because his old computer stopped working with WLAN...

  I tried everything I can. And I am a person of educated tech, so I think I should have the knowledge of this, but I do not have.

  Short version.

  1. install the latest drivers. (Also tried more aged)
  2 restart the computer.
  3 WNIC takes about 10 min to find WLAN.
  4. While working perfect with 130Mbps on project N.
  5.i can user logout and change and all.
  6. when I restart I'm back at number 3.

  Long version:

  I installed XP pro since the XP downgrade Cd included and wireless drivers wasn't on that CD so I downloaded them. (And Yes. "This is the correct drivers.)
  After that I installed the driver and restart my computer, I could not find wireless networks. Kind of weird because I have 4 routers/points of WLAN on my company with the range 60-100% and about 3 other public routers without security. I tried to update the drivers to windows update, and WU has found an update for me. I installed driver and the wireless highlight function. I scream YES and restart the computer. Then it stopped working. N° !!!
  I was a little tired on the problem and began installing some other computers that I bought and when I looked the Toshiba computer that I saw that it was connected to my WLAN. Weird, but I thought it worked then I restart the computer again and then his does not work... again! Now, I have analyzedthe problem and it's like that.

  When I start the computer the my WNIC does not any WLAN.
  About 10 min (10m32s) after starting the wireless started working.
  I am able to disconnect and change the user and it still works, but as soon as I restart the computer it stops and I have to wait another 10 minutes. And so on.

  Anyone been trough something like this even if it is not not toshiba or my model?

  Hello

  What is the Satellite Pro P300 - 1EC BIOS is up-to-date?
  Please check everything first.

  You said you are using Draft N did you tried to establish the WiFi connection using other standard WLan as 802.11 A or G?

  I also recommend changing the WiFi channel and try other channels.

  In addition, you can change a WLan option that affects the WLan functionality. You can find these settings in the Device Manager-> card WLan-> properties-> Advanced tab

  Good bye

• Tecra M4: Cannot get com-port working on Advanced Port Replicator III

  Hi all

  I bought the advanced III PA3314E-1PRP port replicator but could not get work com-port.

  It does not get listed in my equipment manager.
  Anyone has an idea why not?

  Thank you very much in advance!

  See you soon

  Infinito

  I agree with Akuma
  (The name says it all) port replicator replicates the available ports on the laptop.
  If your laptop does not have this port, then you cannot use it with Port Replicator.

• Satellite Pro A300 - 1DZ PSAG1E Vista - cannot get WLan to work

  I have the Satellite Pro A300-1DZ with Vista.
  I can't get the wirless to work. I saw this thread and downloaded the driver wlan as above.

  How is it installed well?

  Thanx

  Your Satellite Pro A300-1DZ belongs to the series of PSAG1E and this series was equipped with Realtek 802.11(b/g) 13ch-RTL8187B WLan card!

  You must use a card Realtek WLan driver.

  But just a question; The WLan driver should already be preinstalled. Have you activated the WLan first before attempting to connect the router toe?

• Satellite A350-20s - cannot get FN keys work

  Hello

  Recently, I formatted the hard drive and installed Vista Home premium new because it was slow. Before formatting, I had turned off the touchpad to use because I found it very uncomfortable to use. So, instead, I used an optical mouse. Once I installed Vista the touchpad did not work and the fn did not meet the F1, F2 - F9... The strange thing is when I press the Fn key, the light comes on and shows his work and when I press Fn + F10, the NumLock Gets and when I press Fn + F11 it goes to normal qwerty keyboard.

  I have downloaded all the drivers for the laptop, including the official Web page of TOSHIBA touchpad driver and tried all the tricks known in the book, but always truggling to get this function of the keyboard work? Your help is very appreciated.

  My laptop is still under warranty, but I'm afraid to send it because they would go like you hav formatted the hard disk drive even I hav installed on the same OS that I already had.

  This is the main reason for this post. Listen to me please

  Hey Buddy,

  I doubt that you have downloaded from the Toshiba site, otherwise your FN keys work correctly! ;)

  In any case, for the FN keys, you need to install Toshiba Value added Package. With this package it is also possible to enable/disable the touchpad. It brings all the FN keys to work.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Just download the version you need and that s it!

• Cannot get Satellite A300 works well

  Hi all,

  I've had many, many problems with my computer brothers laptop for a while now. It is a Satellite A300 (PSAGCA-06P01Q), and initially the laptop worked quite well.

  However, he started a lot of freezing. Whenever we wanted to install a program, (on this occasion AVG 8.0) or go into Control Panel, computer or documents it would freeze, pretending because the computer was not enough performance to do the job. The green roof bar where it says computer near the top of the pop up computer would charge right at the end, as to say he had finished loading, and then it would freeze.

  CTRL + Alt + Del will not work, so the only solution was to hold the power button. However, after a reboot is exactly the same thing. So I decided to return to the widget factory settings recovery, and who went all well, until exactly the same thing happened again. If Vista can't be the problem. I also tried the system repair, (continuously pressing F8 at the beginning of boot), but who gave no positive results.

  However, I had a module of RAM Kingston 2 GB provided with the laptop, and because of the slowness of the computer, I decided to install the RAM. Everything is perfect to the BIOS screen saying it had 4096 MB of RAM (with 2GB) before, which went well. However, try so that it starts properly, after that the green bar under icon Windows finishes loading, a blue screen appears saying something (he went to fast to know what it says), then restarted the laptop.

  Laptop recommended to go to the repair of the system so see if there was any problem with the Vista boot but he came to nothing. So I decided to make aging system recovery to factory settings, but know that I can't do anything because a box comes up saying what operating system to correct, but there is no edition of Vista Home in the box. It says load drivers, but I cannot locate and files.

  Any help will be much appreciated. If you like more information just responds. XD

  Cheers, Hellas_

  Hello!

  This looks like a hardware problem, because you have already tried to recover the laptop using the Toshiba recovery disc.
  So I think it might be a problem of a RAM or HARD drive, but I do not know Mr. in your case, I'll try the gear tests posted by Akuma. I know that two tests and they are very useful to identify an error RAM or HARD drive.

  In addition, I think that the new RAM is not compatible with the laptop or it s faulty. Have you tried to recover the laptop using the old RAM?
  Maybe it works.

  Sorry, but for the moment I can say more about it.
  Try everything what we have posted and give us feedback.

  Good bye

• Cannot get bluetooth to work on T410

  I have a lenovo t410 I'm not able to get the bluetooth to work. According to the lenovo Web site, my configuration came with it. ThinkPad T410 2537 C 84. However, when I click on the bluetooth icon nothing happens. I've uninstalled and reinstalled the driver and click on bluetooth icon still does nothing. Also the bluetooth does not appear when I press fn + f5 that is only the wireless adapter.

  Sorry for the long break in my response, Mardi Gras is passed here in New Orleans. This is the bluetooth adapter cable. I bought a new cable and adapter, replaced and it works. Bluetooth was not appearing in bios so I thought it should be material. Thanks for your help.

• Cannot get camera to work in Snapchat using kkkkk.

  My laptop camera works fine when I go to the camera manually.  But when I open Snapchat inside kkkkk the camera doesn't work at all.  I can't get my computer to recognize snapchat when I go in the section to allow the camera work with applications on the computer.  Any suggestions for a quick fix?  I uninstalled both and reinstalled them both and shut the computer down twice without success.  Help please!  Dana

  Hello Dana,.

  Thank you for your response.

  I appreciate your time and patience.

  I suggest you put in day driver chipset from the following link and check if it helps.
  Reference:
  http://www.ASUS.com/support/download/3/557/0/2/41/

  Please keep us updated on the status of the issue.

  Thank you

• Satellite Pro M70: Cannot get TV OUT work

  I have connected my laptop to my TV via TV-out and a cable to S-video 4 pin. I turned on the TV as output in the advanced settings of my graphics card. I chose the TV via the Fn + F5 keys and I get nothing on my television.

  Can anyone suggest what I might have left out to make it work?

  The S-video cable is new and connect it to the TV is made by a Joytech AV Control Center 2.
  The Joytech unit is operational and the video cable seems OK as the Fn + F5 key indicates that a TV is available - this disappears as an option if I unplug the video cable from the unit of Joytech.

  Any help would be greatly appreciated.

  Hi Lorraine,.

  I presume that the TV is turned to your Joytech AV device? I presume that it gives a kind of signal that you check that the TV can detect it in fact. I once spent a happy few hours trying to use my TV in this way only to find it was switched to composites entries not S-video a. ;-)

  Kind regards

• Satellite L300 - 22 X - cannot get Bluetooth to work

  I got the L300 22 x last week, it says on the box and told me at the time, it comes with bluetooth, but I can't make it work please help!

  on the front of the laptop, there is a wireless switch, which I turned on it lights like orange, but my phone does not find it and when I go into the control panel to try locat any info on the bluetooth is not here to select. I'm starting to wonder if it is installed or not, but why he would say it has bluetooth on the box, if it is not. If anyone knows the answer please help. model nu PSLB8E-0PS007EN.

  Thank you

  Joanna

  Hello

  You will never get Bluetooth works on Satellite L300 - 22 X because it s not equipped with Bluetooth. I put t know who told you this information, but it s wrong.
  A friend told Satellite L300 it s not equipped with Bluetooth too.

  But it uses an external USB Bluetooth dongle which bought in a store of the computer. It wasn't expensive t, but he can use Bluetooth! :)

  Perhaps this is an option for you

• Satellite Pro L20 - cannot get WLAN to work

  Hello

  I have problems with my Satellite Pro L20 after a reinstallation. The wifi does not work.
  I installed the right driver, but have had no luck.
  Anyone with the same problem?

  Any help would be great

  You reinstall your laptop computer with the recovery disc or Microsoft?

  Do you have which driver installed?
  You must use the driver from the Web from Toshiba site. Check again:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Perhaps a BIOS might also solve the problem.