Key Bluetooth pairing on x61s

Similar Questions

• Several devices on Stream 8 Bluetooth pairing

  Hello

  I just wanted to know if its possible to pair 2 or several devices such as the mouse Bluetooth and a Bluetooth keyboard on stream 8 and simultameously work on both?

  Kind regards

  Hrishikesh

  Hello

  Keyboard and mouse Bluetooth Bluetooth work wonder, at the same time.

  I have HP Bluetooth keyboard T800 paired with 8 HP flow, just got one case iBall mouse tried bluetooth pairing with 8 Stream and here we go!

  Keyboard and mouse are paired and works like charm.

  More importantly, I have my free to load usb microphone, USB key, etc..

  Almost want to mini computer, mouse and keyboard, extremely portable and easy to carry.

  Kind regards

  Hrishikesh.

• iOS 9.2 bluetooth pairing

  Does anyone else's problems do with Bluetooth pairing once upgraded to iOS since iOS 9.1 9.2? As soon as I made my Garmin Forerunner 630 was no longer able to communicate with my iPhone 6 (Note: it worked perfectly, while running iOS 9.1 before nightfall iOS which should be upgraded).

  Measures taken to try to resolve the problem

  1. Forget the camera and rematching. This has compounded the situation - the iPhone could not 'see' the device to try to match.
  2. Pairing my Garmin 630 with a friend (Android based) phone - it works immediately - he can see the Garmin and cannot pair it, no problem.
  3. My Garmin 630 with my iPad Air matching - the iPad is also running iOS 9.2 and he too can not even 'see' the device.
  4. Pairing my iPhone 6 and iPad in the Air with a bluetooth (EU Boom) speaker - it works.
  5. Complete reset of my iPhone 6. Twinning with 630 Garmin still does not work.
  6. Reset complete my Garmin 630. No change.
  7. Following the advice of Apple here: Wi - Fi and Bluetooth: potential sources of interference wireless - Apple Support

  Conclusion

  In summary, it seems that Bluetooth still work on the Garmin 630 and the iPhone and the iPad, but Apple has made some sort of change in 9.2 iOS that prevents matching with certain types of Bluetooth device.

  Similar reported problems

  I've seen a few similar reports on support for other devices forums (not "seen" / "detectable") after the upgrade to iOS 9.2:

  Does not connect via Bluetooth, iOS 9.2 to my home theater of sonny,

  Since iOS 9.2 my Bluetooth PlayStation keyboard no longer works

  iPhone 5 sec bluetooth not working after iOS 9.2

  as well as more general questions of Bluetooth for devices that are already paired:

  No bluetooth after 9.2

  iPhone 5 sec bluetooth not working after iOS 9.2

  iCade/bluetooth controller + iOS 9.2

  None of the posts that i reference above gives no real solution.

  Questions

  1 Apple Please recognize that there is a problem with iOS 9.2 on Bluetooth?

  2 - is anyone else seeing problems similar to what I reported and the posts that I've referenced?

  Problem solved, a bit of a schoolboy error.

  For some reason, the iOS to 9.2 upgrade means that the phone and the Garmin 630 were no longer able to communicate. Try to pair again via the iOS Bluetooth settings screen did not work (the unit has not appeared).

  It seems that matching works only if launched from the Garmin Connect app works on the iPhone / iPad. Once you have coupled the app will Garmin 630, then appear in the Bluetooth settings screen standard iOS, showing as connected.

  In summary:

  (1) not all Bluetooth devices will not necessarily be available for matching in the iOS Bluetooth settings screen (didn't know it until now), and

  (2) previously associated device no longer works after update iOS. Not a huge problem, but a bit annoying.

• HP ENVY 17-j113tx TouchSmart: Bluetooth paired but NOT connected to the device

  Bluetooth paired but NOT connected to the device - question - Upload of files from device to PC fails.

  Description of the problem
  
  

  • Download a file from PC (Win10 x 64) for Android phone has worked well.
  • Download the same file from the phone on PC (Win 10 x 64) - FAILURE.

  Someone knows how to deal with this issue, provide a work around...?

  I have way too much time on my hands right now...!

  Treatment

• Speaker Bluetooth pairing problem Gen 4 ATV

  I have a 4 Gen AppleTV. Bluetooth pairing seems very delicate/sporadic. I can get it to pair with my Jabra headset move most of the time, but it does not connect with my Harmon Kardon Soundsticks speakers wireless (bluetooth). All my other Apple products connect flawlessly.

  Someone at - it similar problems? Suggestions?

  Thank you

  Jay

  Order items at the end of the use of Bluetooth accessories with your Apple TV (4th generation) - Apple supported

• Android Bluetooth paired with my laptop that Bluetooth was grayed out (NOT the ability to Exchange files)

  Hello

  Connection Bluetooth to an Android mobile with Bluetooth in HP laptop has failed

  I followed these steps to pair the Bluetooth to my HP laptop and the other Bluetooth Android.

  
  First: I clicked on "Add" device "." Second, the Android mobile Bluetooth showed up. Then I connected to it. After that, "Comparing matching Codes" shown to me. (Screenshot below)
  

  Next: The user of each Bluetooth accepted us as confirmation. Finally: The pair has been established well. (Screenshot below):

  

  Although Bluetooth Android was paired with my laptop HP My Bluetooth successfully, the Bluetooth Android is grayed out on my my list of Bluetooth mobile phone as shown in the screenshot below:

  

  Whenever I clicked on the Android Bluetooth listed in my Bluetooth devices, I don't got no control Bluetooth shows me (NO way to send files from Android Bluetooth appears dimmed) also, whenever the user who has the mobile phone android trying to send file in my laptop Bluetooth paired with its Bluetooth Android, it has encountered an error in sending do not file.

  Although the Android Bluetooth is enabled to be detected by other Bluetooth devices.  If there is a problem with my laptop Bluetooth, then I would be facing the same problem with connecting (pairing) my laptop Bluetooth with Nokia Bluetooth.

  Second: A Nokia mobile with the computer HP Bluetooth Bluetooth laptop was successful:

  I followed the same steps to connect Nokia Bluetooth for my laptop Bluetooth, and he was successful.

  

  Then windows checked drivers for Nokia Bluetooth.

  

  

  Then the control of Bluetooth has been illustrated that will allow to me and the other a user send and receive files via Bluetooth pairing:

  

  NOTE THE DIFFERENCE BETWEEN a connection NOKIA BLUETOOTH WITH MY BLUETOOTH, AND ANDROID BLUETOOTH WITH MY COMPUTER PORTABLE BLUETOOTH LAPOTP):

  1. There is no verification windows drivers for the moment got sync to my laptop Bluetooth Bluetooth Android. However, there is a windows drivers for Nokia Bluetooth control when it is obtained associated with my laptop Bluetooth.

  

  2 - THE NOKIA IS NOT CLOTHING OUT(active/enabled), HOWEVER, THE ANDROID IS GRAYED OUT (inactive/disabled)

  

  I hope you understand the answer for me and me.

  Hello

  I suggest you post your query on the HP forums to get information on the numbers of care for the HP customer for your location because we have no details for him.

  HP Support Forums

  http://h30434.www3.HP.com/

  I hope this helps.

• Don't forget to call with several key-value pairs

  I'm looking to invoke the application Remember and I try to send a title and a due date. The problem is that I don't know the format for sending multiple data items. Can someone help me with the format what should I use to having an remember entry created with a title and a due date?

  function invokeRemember (someTitle, someDate) {}
  BlackBerry.Invoke.Invoke ({}
  target: "sys.pim.remember.composer."
  Action: "bb.action.ADD."
  URI: "remember://notebookentry?title=" + someTitle + '& duedate =' + someDate;
  (}, onInvokeSuccess, onInvokeError);
  }

  I think "Ivoking Basic Applications" page shows how to do this: https://developer.blackberry.com/html5/documentation/remember.html

  It looks like you can send the following in the field of the URI:

  You can also add the following key-value pairs by adding a question mark (?) after the URI:
  
  title=
  description=
  duedate=<# SECONDS SINCE EPOCH>
  status=NotActionable, Completed, NotCompleted
  notebookid=:
  tags=
  

• BlackBerry Smartphones Bluetooth pairing Helper for "BOLD"

  I'm trying to pair my BB "BOLD" with my Land Rover Freelander 2. When I got a BB curve, I had to download a "bluetooth pairing assistance" where can I find this coupling of assistance based on "BOLD" of bluetooth?

  Hello.

  Here is the address of the page containing the link:

  Click here: pairing Bluetooth app

  Thank you

  Bifocals

• Treo 700wx bluetooth pairing w / Motorola IHF1000 - help please!

  Recently, I upgraded my Treo 700wx at the exit of the 1.24 firmware for Verizon Wireless. In the process, I lost the bluetooth pairing with my Motorola IHF1000 that was active before the upgrade. I was able to pair the phone with a handsfree Acura and my Lenovo computer system - I have questions only with the IHF1000 Motorola.

  The phone sees the hands of peripheral free Motorola during the match but when I enter the access code (1234), the synchronization fails.

  Someone at - it suggestions?

  You will not be able to reinstall the patch because the unit will return with an error message saying that it is already installed. It is indeed good to do a hard reset after an update anyway. I really hope it solves your problems, and I'm sorry for the inconvenience.

  Message is about: Treo 800w (Sprint)

• How to programmatically Exchange data (key-value pairs) with operating system called?

  Hi all

  Is there a programmatic way to Exchange data (of the key-value pairs) with the guest OS?

  We have an application that runs inside comments, and we want that this application in order to use this mechanism to Exchange data. At this point, the guest have no network connectivity. One thing that might work for us is to use the registry to the guest operating system. But I'm not sure how to handle the registry of the guest operating system.

  We looked in the VirtualMachineConfigInfo.extraConfig property, but these key-value pairs are not accessible from the comments (at least this is what I know)

  any ideas?

  Thank you

  Onur

  I think that it is better to use an environment variable or file to Exchange data with the guest operating system.

  http://www.doublecloud.org/2012/03/set-environment-variables-in-guest-operating-system-on-VMware/

  http://www.doublecloud.org/2012/03/read-environment-variables-in-guest-operating-system-on-VMware/

  If you really want the registry value,

  http://www.doublecloud.org/2012/02/run-program-in-guest-operating-system-on-VMware/

  http://en.Wikipedia.org/wiki/Windows_Registry#Command_line_editing

  Good luck!

  Steve, author of the Open Source, VMware VI and vSphere SDK VI Java API

• To access the inside loops key/value pairs

  According to the docs of Shopify, liquid allows access to key/value pairs in for loops, as follows:

  {% for item in hash %}   {{point [0]}}: {{point [1]}} {% endfor %}

  This does not work in the liquid renderer in British Colombia; the output of the key/value tags are empty. Here is an example of using the always available this.urlculture global object:

  {   ...   {"urlculture": {"ModuleName": "urlculture", "culture": "EN"},...}

  {% for obj in this.urlculture %}

  {{ obj | json }}

  Key: {{obj [0]}}
  Value: {{obj [1]}}
  {% endfor %}

  This is the result I get:

  {
    "Key": "moduleName",
    "Value": "urlculture"
  }
  
  Key:
  Value:
  
  {
    "Key": "culture",
    "Value": "EN"
  }
  
  Key:
  Value: 

  Access by name (such as {{ obj.Key }} ) also fails.

  Am I missing something, or is this all just not yet implemented?

  Also, why isn't the nice formatting illustrated in this visible post editor in the current post code?

  Thank you, Robert.

  This was a great find. And you'll be happy to learn that we have set and it will work in the next version (unfortunately the hotfix does not update today, we have deployed on the beta version).

  You will then be able to do things like:

  {% for getParam in globals.get %}
  {{getParam[0]}} = '{{getParam[1]}}'
  
  {% endfor %}
  

  -Lucian

• What is the best way to move with esx3.5 vmtools key/value pairs?

  Hello

  I found both candidates to store the key/value pairs for a vmware client. My ultimate goal is to run a process on the VC box that updates these data, and then read through the software tools of vm on the host (somehow) were invited.

  The first method is through 'guestinfo' settings which can be adjusted in four ways:

  Add the variable of the vmx fileprompt.
  Set the variable manually on the client (using vmwareservice.exe - cmd "infoset");
  using vmware-cmd (vmware-cmd & lt; vm-cfg-path & gt; setguestinfo & lt; variable & gt; & lt; value & gt;)
  the use of vmcom.dll COM objects (seems to be deprecated in ESX 3.5)
  These variables are easily accessible on the client by running vmwareservice.exe - cmd 'info-get guestinfo.variablename '. However, I cannot find a convenient way (better based on powershell) of their definition of a scheduled task or service to VC area.

  The second method is the customfields of guests in VItoolkit property, which can be defined as follows:

  get - vm MyVMName | Game-CustomField-nameOfValue name-value DataToBeStored
  Unfortunately, I am unable to access these data in the comments, and indeed I do not know if this is possible. If this isn't the case, I guess my only recourse would be to write a tool to connect to Web services on the VC box with a low privilege account. I prefer not to do this because it means the network infrastructure implementation to point the guest to the right VC, development of custom etc permissions...

  So, my questions are:

  • Is it possible to define variables of guestinfo through VI Toolbox, running on the virtual circuit?

  • Is it possible to read customfields on the client, through the vmtools?

  • Or is there another method to make this key/value data exchange?

  You can add/edit entries in the VMX file like this

  $vm = get-vm  | Get-View
  
  $vmConfigSpec = New-Object VMware.Vim.VirtualMachineConfigSpec
  $vmConfigSpec.extraconfig += New-Object VMware.Vim.optionvalue
  $vmConfigSpec.extraconfig[0].Key= "guestinfo"
  $vmConfigSpec.extraconfig[0].Value = "whatever"
  
  $vm.ReconfigVM($vmConfigSpec)
  

• IPhone Bluetooth pair with car even when I do not have a call

  I recently started having a problem with my IPhone 4 s automatically picking up the sound system in cars, even if I did not call. This happens as soon as I turn on the car. When I press the keys on the phone I hear the click key in the car sound system, and the radio is removed. This happened with a Chevy Volt and a Ford CMax, then this is the phone, not the car. The only way I can make the radio work is to turn off the Bluetooth on my phone. It started only in the last week or two and I downloaded an update of the phone on the right, then, that could be the problem. Any suggestions?

  If the phone is paired with the car, it will happen.

  Can you not turn off the twinning/forget the connection?

• HP Officejet Mobile Printe 100: Bluetooth pairing

  I have a LG-D500 4.1.2 android. feature phone that I'm trying to pair it with my new 100 HP mobile printer.   The bluetooth of phone detects the printer and then ask a PIN as 0000 or 1234.  None of these base pins are accepted by the pairing process.  Need help to get matching conducted, or a way to get around, so I can use this printer on the road.

  I also installed the application "Printshare.  So, I'm ready to go.  Just I have to get this dang thin pin situation.

  Hello

  The ships of the printer with a predefined access key that is set to six zeros '000000', tyoing this password should allow to connect to the printer.

  If you encounter problems, you can also reset the Bluetooth settings as follows, a reset will set the password as "000000" as the default:

  http://support.HP.com/us-en/document/c02643374/

  Shlomi

• Keyboard Bluetooth pairing code problems

  I have a keyboard microsoft bluetooth keyboard 6000, after getting a blue screen that I lost the connection with the keyboard, when I try to associate the keyboard of my computer, the computer detects the keyboard, but as I go to the next screen, it immediately jumps to another screen that informs me that I need to use the code for pairing with the device. Why?

  Hi Freckles1,

  1 have you used the matching code provide with the mouse and check if it works?

  2. did you of recent changes on the computer?

  Pairing code is another term for a number that associates your computer with a Bluetooth compatible device. The security key terms and pairing code are often used interchangeably.

  Using authentication keys compatible Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-passkeys-for-Bluetooth-enabled-devices

  First, I would say that you are using the pairing supplied with the product code and check if it works.

  If the previous step fails then remove and then reinstall the device

  (a) click the Start button, select Control Panel, click hardware and soundand then click Bluetooth devices.

  (b) select the device that is not working, and then click Remove.

  (c) click Add, press the reset button on the unit (or make it discoverable following the manufacturer's instructions), check the box my device is set up and ready to be found and then click Next.

  (d) if the device is not found, repeat the previous step. When the device is found, select it, and then click Next.

  (e) follow the remaining instructions in the wizard.

  Make sure that the Bluetooth adapter for your computer is attached and turned on, and that the device is in use and detectable. If you don't know how to turn on discoverability, read the instructions provided with the device or check the manufacturer's Web site.

  The problems with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.