Keyboard and mouse which hang

Similar Questions

• With the help of Windows 8 with a wired keyboard and mouse which drags or lethargic

  Hello

  I list a lot on ebay. Recently my mouse and keyboard do not quickly, quite often.  They are very slow.  Letters are missed while he sits there, then appears in.  The keyboard and mouse work fine on MS Word and other applications, but it becomes very frustrating to hold intermittently not working not not back then pop.  Any help is appreciated.

  Sincerely,

  Patric

  Most likely, the problem you are having is that the system is busy on another process and that it cannot respond to the movements of the mouse. Or the system may have blocked entirely (frozen) and could answer is no longer at all.

  If you experience lag or slowless once again, try to open again (Ctrl-Shift-Escape) Task Manager then go to the Details tab of process and write it all down using lots of CPU usage %.  If you recognize the name of the process, you can take measures to put an end to this program to run (right-click on it to put an end immediately if you wish).  If you doesn't recognize, after back here and let us know and we will try to help you identify the culprit.

• keyboard and mouse freeze, hang, do not work

  again, the question was better but once again tonight.

  I have windows xp pro, acer power non-portable pc, ps2 requires laser (not wireless) mouse.

  at random times and programs, they will work and the mouse may hang and then keyboard. Sometimes I can take the mouse out of the back and use it in another form. Sometimes he stop and go in that direction or not responded on the card, even if the light is on. I heard today 3 beeps of the tower and the keyboard and the mouse has frozen.  If the keyboard is blocked so the only thing I can do is turn it off and restart. I don't think not that it's too hot because the problem may start immediately or later. the Device Manager in the Control Panel indicates these 2 works correctly and I can't find a place to make sure market. I clean the heat sink.  I'm not real smart but suggestions. What do the beeps mean.

  I finally found a solution for the mouse freeze problem which has been a pain in the A * because I bought the wireless mouse and used with my Windows 7 laptop. Try it to see if it works for me.

  THE MOUSE FREEZE PROBLEM SOLVED! (HOPE THIS HELPS)

  >>
  Mouse freeze problem is more likely to be linked to the USB SUSPEND MODE as most mice now use the USB port to connect the blow in.
  >>
  You can try this out. It works for me.
  >>
  Go in select
  >>
  According to what plan of power, you are 'Balance' or 'Power Saver', select the accordingly
  >>
  Select and expand <+USB settings="">by clicking the <+>sign
  >>
  Enlarge it <+USB selective="" suspend="" setting="">by clicking on the <+>sign
  >>
  Set both & on "Disabled" and click 'Apply'
  >>
  GEL MOUSE (SUSPEND) PROBLEM HAS DISAPPEARED FOR ME!
  >>
  Hope it will be useful.
  >>
  See you soon,.
  >>
  cybersam999
  >>

• Keyboard and mouse hangs often.

  Thank you for your time.

  I was faced with a problem with my mouse and keyboard. It's mostly the mouse, but it happens that the keyboard is affected. Basically, weather it's game or just browsing, the mouse would stop working for a second, then making noise he might do if I plugged it in, then start working again. This could happen very occasionally or once a day. Sometimes, the keyboard and mouse stop working for good. So I have to press the off button on my tower to put in mode 'sleep'. Which temporarily solves the problem.

  The only thing that I can associate this problem with is buy Borderlands 2 on Steam. In other words, this is the first time, I had this problem. It's probably a coincidence, but if it has something to do with it, it would be good to know. I was told to update my BIOS, but my father (I'm 15) tells me it is not a good idea because something can go wrong, and totally riun my machine.

  My specs are:

  Product number: QW729AA #ABA (I don't know the exact name of my computer, but it says HP Pavilion on it.)

  Windows 7 64 bit

  No real error message

  The change was that I noticed the problem around me buy Borderlands 2

  Once again, thank you for your time to help me with this problem.

  I think that I fixed it.

  It was the mouse itself, because I spent my mouse with another and the poor functioning of the mouse didn't work on the other computer.

  I just mark as resolved or you guys can I do if I can't

  Thank you

• Internal keyboard and mouse do not randomly respond time forcing me to restart my laptop 15 times until it works again

  1. sometimes this feedback haptic on the mouse is not triggered, leaving me by clicking on the mouse, while feeling against nature - something that is not supposed to happen

  2. after I close my laptop / closing of the lid/Eve (do not turn it off) the keyboard and the mouse literally don't work - it forces me to restart my laptop several times (sometimes around 15, take me 5-10 minutes just to get my laptop to work)

  Additional details:

  -J' tested a USB keyboard and mouse with my laptop and it works perfectly, even when the internal don't - maybe it's a hardware problem?

  -I went to the apple store a few weeks ago and spoke to someone at the "Genius Bar," which really helped at all - he told me I have to restart my laptop every time I open and I should do another user account - although I was skeptical about the logic used to arrive at these "solutions" I tried them anyway , here we are with the same problem - also, I don't have to close my laptop down 15 times every time I want to use, it's ridiculous, and that's why I bought a mac rather than a pc.

  -I'm not running any software/battery intensive programs on my laptop - especially just the word and the Google Chrome, which is not a lot

  -Here is a link to a video I downloaded from google reader showing how ridiculous, it's... https://drive.Google.com/open?ID=0B4oQ4C8NCLcWTWo5aVlrbDE1QmM

  Questions

  -I don't think that a fix is quite likely, but any suggestions are welcome!

  -Can I bring to the apple store and require a replacement? I left two years of care of apple

  This is probably in the wrong category, I apologize in advance - but it is a really weird problem that I don't think has a solution. Nevertheless, thank you for the reading of my rants and seizure of your advice!

  One thing that causes the mouse further trolling, is if your CPU is completely consumed by something. This can be checked in activity monitor CPU (all processes).

  Two other things can keep your Mac to be properly adjusted:

  GPU is suspended. These are cases where the GPU is no longer and can usually be seen in the console log, with symptoms such as GPU hang or WindowServer does not.

  Disk crashes.

  For the rotation of the discs, this can be a sign of imminent death of player.

  For SSDS of spare parts, this can be caused by the accumulation of deleted blocks, used in activating do not trim for your third-party SSD drive.

  -------

  The reason of suggests that you create a new user id is as a check against the clogging of a particular userid with junk that keeps things from being reactive. [a new user id will not have it clutter accumulated, so can react differently. He is not really a solution, it's a diagnosis.]

• wired keyboard and mouse not recognized after sleep

  TL; DR after waking from sleep, the wired Mac keyboard and mouse are unresponsive.

  I have a new Mac Mini.

  OS X El Capitan 10.11.2, 16 gb Core i7.

  I had a keyboard and a compatible bluetooth mouse, but I had the problem that after the Mini for sleep, the keyboard and the mouse were not detected.

  I bought an Apple mouse wired and wired keyboard.

  I have the same problem.  If I SLEEP the Mini, when I wake up it (short press on power) or the keyboard or the mouse are recognized.  It's like I have no connected.  If I disconnect it from the usb and the re - attach they are not always recognized.  I have to press power to force power off and restart and then my keyboard and mouse are recognized.

  Sometimes when pressing the power button to wake up from her sleep, I also get a "flickering" image monitor, which improves if I turn on and off to sleep a few times, or restart.

  It is very annoying, any ideas?

  Try turning off blue tooth - it seems to me the pop up screen searching for the mouse Bluetooth turn on the lock.

• Keyboard: Keyboard and mouse - different game - work together

  Hello

  I have a wireless mouse HP (RM809A) with possibility to use USB blotooth and keyboard HP (KG-0851) another game (of the same kind) withought a possibility of using USB, which I lost. When I plug in the USB, the mouse works fine but I can't make the keyboard work. I ve tried with the new battery pack and followed the instruction Peel in what concerns (pushing connect button for long periods).

  So... is anyway I can do a keyboard and a mouse are working together on a single receiver USB BT's?

  Thank you...

  HP keyboard and mouse combo games match factory. There is nothing that an average homeowner can do to make a set not work matched together.

  Logitech has made a game that runs on a single unifying bluetooth dongle.

  http://www.Logitech.com/en-us/keyboards/keyboard-mice-combos

• G11 keyboard and mouse G9

  Hello

  I have a DELL Inspiron 1720, G11 keyboard, mouse G9 and vista32 home.  Every now and then some programs or games freeze.  If I unplug the keyboard and mouse and their connection back (USB) program work impeccably.  All the drivers are up to date.  Any help would be greatly appreciated.

  Thank you!

  Hi bjenk007,

  To help solve this problem, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot.
  http://support.Microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot)

  (2) enable half the services

  (3) determine whether the problem returns

  (4) enable half of the startup items

  (5) determine if the problem returns

  (6) repeat the steps above until you find out which program or service is causing the issue

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article
  http://support.Microsoft.com/kb/92913 5

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thank you, and in what concerns:

  Diana D D - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install a wireless keyboard and mouse in Windows 7

  I installed windows 7 on my neighbor's computer.  I do not have the keyboard and the mouse at the time so I used one of my own (not wireless).  Now, I have a keyboard and mouse, but can not understand how to operate.  The computer is a gateway FX400 XL.  I went to the front door and downloaded a driver entered Gateway 400 series for Windows 7 32-bit system.  I then ran the installation for this driver who really seemed to be for Windows XP.  I shut down the computer, unplugged my mouse and keyboard, and return the computer.  I have a cursor on the screen but it won't move and the keyboard does not work.  I then plugged my keyboard and mouse again and still works.  Any ideas as to what I should try next?

  Hello Willie Wonka 2,.

  Mouse and keyboard wirelesss should have with its own installation disc you need to first install. You should also have a "receiver" which the mouse and the keyboard must be synchronized with to make them work properly. If you look at the bottom of the mouse and keyboard, you should see a button 'tiny' with the words 'connect' next to them. You must move the mouse close the "receiver" and press the button connect the mouse with a blunt object (pencil will usually do). All the lights of the "receiver" will start to Flash when the mouse connects. When they stop flashing the connection generally were filed. You will need to do the same thing with the keyboard.

  Regarding the drivers, you should check the site of manufacturers of keyboard and mouse for the updates.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Keyboard and mouse PS/2 tv_ConfigMgrErr24

  Whenever I bring my hibernation of the keyboard and mouse desktop PC take a long time to begin to answer - usually only after disconnection/re-plugging them a few times.  In other words, that it can take 5 minutes or so just to the connection which can be a little frustrating.  A diagnostic report of systems (from reliability and performance monitor) pointed out two errors:

  The unit, PS/2 Standard keyboard, reports "tv_configMgrErr24"...

  The device, mouse PS/2 Standard, reports "tv_configMgrErr24"...

  The advice is to update drivers - but when I do this via the Device Manager it tells me that both drivers are already installed and up to date.  I am reluctant to uninstall devices (as specified by the System Diagnostics report) that I don't want to take the risk to lose them and have then no HIDs!  Is it a risk?

  Any help and advice you can offer would be much appreciated.

  O / s: Vista Enterprise SP2 - fully updated

  Hi fitrovian,

  You can disable updates for Windows updated recommended and try the steps that Diana exposed again.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Missing notification icon for wireless keyboard and mouse in the systray area.

  Missing notification icon for wireless keyboard and mouse in the systray area. Was working before the hard disk crash. Had to reload Windows Vista 64 bit OS. Have computer model gateway GT5678.

  Chances are good the software to include these icons in notification tray cam pre-installed on the bridge.  If you still all original gateway software, try to see if something in the menu start / all programs of the gateway seems as it can contain controls for these settings and run the program to check and see if it does.  If none of the gateway software help (assuming that all this is still installed) and re-installing the drivers did not work and there is no controls at the keyboard or the mouse, so I know what else to think.  These icons are not available with Vista - they were installed by a third-party device or software driver.

  I'm sorry that gateway could not help you.  They are those that you need to do to solve this problem, because it is something that they installed with the original computer which is not re-installled after you change hard drives.  They should know what software for it and power point yoo to a download site, or you send a disk with this software.  We can't really do anything else to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• In safe mode, my keyboard and mouse are inactive. Vista Prem

  In safe mode, my keyboard and mouse are inactive. Vista Prem

  Hi cph508,

  I assume that devices work correctly in normal mode

  (a) if it works in safe mode before? Remember to make changes to the computer before that happened?

  (b) use which type of keyboard and mouse? Who is the manufacturer of the devices?

  You can check with another (USB-universal serial bus) keyboard and mouse

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• PowerEdge 840: USB keyboard and mouse not working not.

  Hello everyone.

  Yesterday, I pursached a used Dell Poweredge 840 to function as a backup server, I'm having a few problems with it but I can't understand.

  I installed the server with Windows Server 2003 x 86 edition and downloaded the drivers on the Dell site. It works perfectly, except for one problem:

  USB keyboards and mouse refuse to work.

  PS/2 works fine however, but any USB keyboard or mouse will not work.

  Flash USB drives read very well, therefore I used to recover some files on the machine before, but it was connected to the network, USB keyboard and mouse do not work.

  They are not recognized at startup and do not allow to enter the setup of the BIOS after Windows has started, that they are not always recognized. Windows displays the device as unknown device.

  I tried to boot from a live CD of 14.04 Lubuntu, in which the USB keyboard and mouse do not work either. Only PS/2 wants to work.

  I have tried different types of USB mouse:

  • Microsoft mouse
  • Acer OEM mouse
  • Mouse laser Logitech M-U0007

  None of them could work, although they work fine on my laptop, the main file server which is a model of HP and Dell Optiplex desktop computer.

  I tried a few different USB keyboards as well, but they refuse to work.

  I ended up borrowing a pair of keyboard and mouse PS/2 to configure the server, but I want it to work with my USB keyboard and mouse.

  Just for the record: the USB flash drives do not work very well, it's just the keyboard and mouse is not working.

  Anyone know how I can get there?

  Thanks in advance,

  Dominique

  Hello.

  Unplug all devices connected to the USB and PS/2 ports. Unplug the AC power cable, wait about 1 minute and then press in and hold the button for about 15 seconds. Reconnect the power and power on the server. Connect the keyboard and mouse to the USB ports and try again.

• Connect the keyboard and mouse wireless with new transmitter/receiver

  Hello.

  I have a keyboard and wireless Microsoft mouse 2000 but the transceiver does not seem to work.

  I also have another transmitter/receiver (same model) which belongs to Microsoft Wireless Keyboard and Mouse 5000, so my question is:

  is there a way to use the wireless 2000 with this new transceiver box? How can I change the transceiver settings so that it finds the keyboard and mouse?

  Thanks in advance

  You can not.

  The receiver is synchronized with the keyboard and the mouse in the factory and cannot be re paired at the level of the Office

• PC runs, but does not start. Monitor, keyboard and mouse with no signal.

  PC runs, but does not start. Monitor, keyboard and mouse with no signal. Pretty much. And when you want me to remove the battery of the bios, or whatever, it seems tight and hard to get out because it is surrounded by other elements.

  All fans work, the power/battery or anything that works I think that, since there is a fan on the right where it is and it seems to work. I remember what happens before, I don't know, but before that, there are many gels. This error below was made before all this happened, but I managed to run f8 and then run normally until it freezes again. Then, after that, it runs but does not start. No beeps etc. The best fans will have plenty of vouches and Bravo to wherever you like me to vouch or maybe send the great service that you provide to administrators if that's even possible, haha.

  Thanks in advance.

  "

  The file is possibly corrupted. The file header checksum does not match the checksum calculated. »

  It is a sign of a lack of food.  Looks like you have a desktop computer?

  Power supplies run about $50.  It is a rectangular box at the corner of the system in which the power supply will from the outside.  It's a pretty standard form in most of the PC and with a little investigation thorough replacements can be found.

  It is usually held in place by 4 screws and can be held in place with a spring clip.

  Most essential, is that you need to buy a replacement with the right number of straight plug forms to adapt to your PC.

  This seems more complicated than it really is and takes about 5 to 10 minutes to do the replacement.

  Look at the power output of the power supply failure and buy a new, more powerful.  New desktop PC usually come usually with a diet under size and what are the causes these failures is too strong a request for devices you have connected.  So, buy one with a higher power rating.  Usually about 500 Watts does the trick.

  If you do not feel upwards to this task, a technician should not charge you much like this.