In safe mode, my keyboard and mouse are inactive. Vista Prem

Similar Questions

• Satellite L30-115: does not start when external keyboard and mouse are connected

  My Satellite L30-115 starts when my external keyboard and mouse are connected to PS2 USB adapter.

  Everything is OK, when they are not connected, and they work fine when they are connected after boot.

  Someone has any idea how to solve this problem?

  Hello

  I don't think there is a way to solve this problem. Also, I assume it is the related issue of the BIOS. Is perhaps the time to be up-to-date and use new and compatible equipment. ;)

• Why my keyboard and mouse are dead at the start of Windows 7 Home Premium?

  They partially dead through boot but usuallycome back on except when first starting the morning.  After using the power button / stop and wait a few minutes, they come back OK on the next boot.  Work due to certain programs at startup?

  Your device drivers are up to date? Check the website of your PC or your mother maufacture support.

  If this is not the case, then go to the support web site factory and download Windows 7 drivers to a folder on your PC and then first install the drivers for the card mother/chipset, followed by USB, SATA, LAN, Audio and all other pilots.

  Find the website of your computer manufacturer support.
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  ================================================

  Also check the event logs for errors indicated shortly after the hour of you 1 start the computer.

  (Click Start / right click 'Computer', then click 'Manage' in the list.) NECT click the "Event Viewer" in the System Tools category.

  J W Stuart: http://www.pagestart.com

• PS2 Keyboard and mouse hooked after XP SP3 installed

  Upgrade to SP3.  Keyboard works very well to get into the BIOS.  F8 works very well to get to choose the Safe Mode, and al. or not.  Once XP takes control, the keyboard and mouse are unresponsive.  Mouse move the pointer on the screen, the keyboard will not activate numlock or other keys LED.  Power - off only option.  Tried other keyboards and other mouse.  No go.

  Any ideas?  Perfect condition ' puter til SP3!

  I said nothing about "of special drivers', I suggested seeking & install the updated drivers. If none is available, there is a very good chance that your older equipment of keyboard and mouse is not supported in WinXP SP3.

  Free installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009. This support will cost U.S.$ 59 or by higher incident now.

  OT: Unlike focus groups, we can't crosspost in these forums, we can only multipost.

  Multiposting vs Crossposting
  http://www.blakjak.demon.co.UK/mul_crss.htm

  Despite what you see in this forum URL or at the top of the forum page, Windows Update forum is not a forum specific to Vista or Win7. We deal here with WinXP, Vista & Win7. [What were thinking?]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Keyboard and mouse do not work on startup.help

  Keyboard and mouse are unresponsive at startup... help

  Hello

  Please write in the Microsoft Community Forums.

  I understand that the mouse and keyboard do not work to start the computer.

  Let me go ahead and help you with the issue.

  It would be more useful, if answering these questions:

  1 have you ever try to use different mouse and keyboard on the computer?

  2. What is the brand and model of the mouse and keyboard?

  3 did you do changes on the computer before the show?

  I suggest you follow the provided methods to solve the problem:

  Method 1: Start in Safe Mode:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  If the problem does not persist in safe mode I suggest you perform the clean boot:

  Method 2: run the clean boot:

  Perform a clean boot to determine if any 3rd party service is causing the issue:

  http://support.Microsoft.com/kb/929135

  Note: After you perform troubleshooting steps to clean boot, follow the steps in the link to start the computer to Normal startup mode.

  Method 2:

  Run the fix it and check.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Keyboard and mouse did not work properly after the service pack 2 update

  key Board runs very slowly and mouse runs through the screen when it is used. Acer Aspire 5050-3371 came with Vista home

  Hello

  Do you use a touchpad or mouse wired / wireless?

  Your laptop is connected with laptop keyboard?

  I suggest you to check if the keyboard and mouse work will find in safe mode. Follow the steps that will help you perform the following checks:

  Method 1

  a. restart the computer.
  b. start typing the F8 key.
  c. you get early boot option window.

  For more information, see: the boot advanced (including safe mode) options

   

  After the entry into SafeMode Log in your user account and check if the keyboard and mouse are working.

  After you perform method 1 Troubleshooting and if you find the keyboard and the mouse does not work correctly then you can perform the following procedure.

  Method 2:

  You can also perform the clean boot and check if you are able to start successfully. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate conflicts of third party software.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7:http://support.microsoft.com/kb/929135.

  Hope the helps of information. Please post back and we do know.

• Delays in the keyboard and mouse

  As I ran my Windows 7 update on 11/10/12, my keyboard and mouse are delayed intermittently.  This happens in gmail, hotmail and other web applications.  It doesn't seem to be a problem in word or excel or other programs Ms.  I uninstalled and reinstalled Firefox 16.  When I type and letters to catch up later, they are not accurate. Any suggestions?  My laptop is an Acer Aspire 5820 T.  Thank you.

  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  -
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  -
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  -
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  -
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  -
  Finally if all else fails, you can look at the rather cryptic system event log.  To do that click on start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
  `
  When you get your system in good working condition, I invite you to back up your system up to an external hard drive and it puts regular periodic updates.
  -
  I hope this helps.  Good luck.

• wired keyboard and mouse not recognized after sleep

  TL; DR after waking from sleep, the wired Mac keyboard and mouse are unresponsive.

  I have a new Mac Mini.

  OS X El Capitan 10.11.2, 16 gb Core i7.

  I had a keyboard and a compatible bluetooth mouse, but I had the problem that after the Mini for sleep, the keyboard and the mouse were not detected.

  I bought an Apple mouse wired and wired keyboard.

  I have the same problem.  If I SLEEP the Mini, when I wake up it (short press on power) or the keyboard or the mouse are recognized.  It's like I have no connected.  If I disconnect it from the usb and the re - attach they are not always recognized.  I have to press power to force power off and restart and then my keyboard and mouse are recognized.

  Sometimes when pressing the power button to wake up from her sleep, I also get a "flickering" image monitor, which improves if I turn on and off to sleep a few times, or restart.

  It is very annoying, any ideas?

  Try turning off blue tooth - it seems to me the pop up screen searching for the mouse Bluetooth turn on the lock.

• Question Z820 keyboard and mouse

  When the powers of the workstation on the keyboard and the mouse are not recognized. I can't enter the bios or Setup screens and then that windows 7 boots again, the keyboard and mouse are not yet available. If they are moved to the 3 USB ports, so I can use them in windows, but not in the bios configuration.

  Edited: I have also reset the CMOS by jumper and button using the PS/2 keyboard access. It seems that all USB 2.0 ports no longer work (front or rear). When I plug a mouse in the red laser flashes once, but that's all, nothing after that.

  The motherboard seems to be defective. Please call HP support.

• My MS Wirless Desktop 2000 keyboard and mouse work on my iMac with OS Lion 10.7.3?

  With regard to MS Wirless Desktop 2000 (kyboard and mouse)

  I'm using an iMac with OS 10.7.3Lion.

  Microsoft Wireless Desktop 2000 (keyboard & mouse) I just told bot that's software works with OS 10.4 thru OS 10.6
  It will not install on OS 10.7.3?

  Hello

  Probably best to check with the material support of Ms.

  Wireless Desktop 2000 - details<-- system="" requirements="" -="" macintosh-based="">
  http://www.Microsoft.com/hardware/en-us/p/Wireless-Desktop-2000#details

  The system configuration required

  Windows computer | Macintosh computer

  Computer operating system

  Windows 7, Windows Vista or Windows XP (excluding Windows XP 64-bit)

  Hard drive

  100 MB

  Other

  • USB port
  • Microsoft IntelliPoint v8.0 and Microsoft IntelliType Pro v8.0

  Internet access required for some features. Local telephone and long distance may apply.

  Download the software required for full functionality of all features.

  Internet access required for software installation: www.microsoft.com/hardware/en-us/downloads

  You must accept the terms of the license to download the software.

  2 alkaline batteries (included) required AAA.

  Computer operating system

  Mac OS x v10.4.x - 10, 7

  Hard drive

  30 MB

  Other

  • USB port

  ====================

  Microsoft Hardware support
  http://www.Microsoft.com/hardware/en-us/support

  Microsoft Hardware - contact us
  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Microsoft Hardware Warranty Info.
  http://www.Microsoft.com/hardware/warranties.mspx

  The keyboard and mouse are delivered with 90 tech support of day of the 1st incident that was about to begin when
  contact Microsoft at the number below.

  (If the device is defective, you can check with the vendor or Microsoft).

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 OR 1-800-642-7676 for MS material.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• wireless keyboard and mouse with Insignia bluetooth adapter

  I have a Pavilion 23-h024 all-in-one with Windows 8.1 and trying to pair my keyboard mouse to a 4.0 Insignia bluetooth adapter and wireless. When I go to the settings of the PC and click on Bluetooth he searches for devices but does not stop and never find all of the devices. Does anyone know if I'm doing something wrong? The adapter of the Insignia would not be a updated driver for 8.1?

  Nope. The dongle and the associated keyboard and mouse are coded to work together as a set.

  It's time to pick up a bluetooth or wireless Clavier\souris combo set.

  You will be probably better to choose a wireless set.  Check out the review sites.

• New Wireless Desktop 800 with no transceiver - what can I do with the keyboard and mouse?

  I have a MS Wireless desktop 800. After a week, I broke the mini transceiver and bought a new game. Since the first set keyboard and mouse are matched at the factory and cannot be re-synched, I find myself with essentially a new keyboard and mouse that I can't use. I wouldn't throw out - they are brand new. Is this WHAT can I do with them?

  Hello

  There is no suggestion that we can do to solve this problem.

  It's specific hardware of matching which can only be solved through software.

  You must contact the material support of the link below:

  How to replace Microsoft software or hardware, order service packs and replace manuals:

  http://support.Microsoft.com/kb/326246

  I hope this helps.

• all keyboard and mouse come with 27 XPS is WITHOUT usb receiver

  Received the new brand 27 XPS from Dell today, but cannot find the USB receiver for the keyboard and the mouse. Called the service center and said the reason for which I don't have the USB receiver is Dell do not have in stock. so they just didn't put the receiver in all keyboard and mouse. ADMIN NOTE: replace character removed according to the TOU >

  It is a funny thing, is it? Dose anyone have same issue with me?

  Hi wsawsd_han,

  I'm fairly certain that the keyboard and mouse are bluetooth with a built-in receiver. Have you tried them yet?

• HP SlimDesktop 450-a114: keyboard and mouse only work in safe mode

  When that I starts normally, the keyboard and the mouse do not work and I can not connect.

  If I boot in safe mode, the mouse and keyboard and I can open a session.

  In safe mode, when I go into Device Manager, the device of keyboards is "HID Keyboard Device" and the mouse device is "mouse HID-compliant".  What should I do?

  Thank you

  Mike

  If it works in Mode safe is probably a driver issue because Safe Mode doesn't load any third-party drivers.

  I suggest that you go into Device Manager"and uninstall the keyboard and the mouse. To restart Windows will detect the keyboard and mouse and reinstall the drivers, I hope as fixing the problem.

  * You didn't say what version of Windows you use, so I could not be more specific on how to access the Device Manager.

  If you found my answer helpful please say thank you by clicking on the icon of the thumb.
  If my answer has solved your problem, please mark it as accepted Solution. Thank you!

• You want to exit sleep mode computer with keyboard and mouse.

  Original title: waking from sleep with keyboard and mouse

  IM on a newer dell, the thing is that it does not start unless I press the power button when im in mode 'sleep' I need to start from the keyboard and mouse is there something like this in the control panel under xp?

  Hello

  You can follow this link & check if the problem persists:

  To resolve this issue, follow these steps:

  a. click Start, click run, type control keyboard and then click OK. Open the keyboard Control Panel item.

  b. click on the hardware tab, and then click Properties.

  c. click the Edit settings button
  Note This step requires administrator access.

  d. click the power management tab and check that allow it this device to wake the computer is turned on.

  e. click OK, and then click OK again.

  Hope the helps of information.