KODAK printer fails to communicate

Similar Questions

• Conection lost to esp5200 kodak printer signal is excellent and still high tower failed to connect.

  can't conect printer

  conection lost to esp5200 kodak printer signal is excellent and still lap top cant conect

  Hi FrancesFlores,

  ·         What operating system is installed on your computer?

  ·         What happens when you try to connect to the printer? You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  Please answer the following questions so that we offer in addition to the steps to solve the problem of troubleshooting.

  During this time, you can consult the following articles and check.

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

   

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information helps.

• Kodak printer prints everything but why my Craft studio CD?

  My Kodak 3-in-one printer prints all black and color except why my Craft Studio CD?

  Just don't move at all.

  Hello

  I see that you can not print Craft studio CD of the Kodak printer. I'll help you with this problem.

  1. have you made changes on the computer recently?

  2 is the issue limited to Craft studio CD is unable to print?

  3. what exactly you are trying to print from Craft studio CD?

  4. what operating system is installed on the computer?

  I suggest you to report this issue in the Kodak support here: http://support.en.kodak.com/app/answers/list/p/5/selected/true

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• The Kodak printer error: 'ink cartridge needs to be replaced.

  MY PRINTER WINDOW DON'T ME LETS NOT LET WINDOWS ERROR WHICH SAYS "INK CARTRIDGE NEEDS REPLACE '... I have HAVE INJECTE MY OWN INK IN THE CARTRIDGE AND AM TRYING TO CLEAN THE head of PRINT, BUT can't GET BACK to "HOME" IN ORDER IN MOVE TO 'MAINTENANCE' STATEMENT... Help, please... Thank you...

  Original title:
  HOW TO GET RID OF THE ERROR CODES ON MY KODAK PRINTER WINDOW

  Hello

  1. may I know the version of the Windows operating system you have? It's windows XP, Vista, Windows 7?

  Check if the problem persists with the other computer.

  I suggest you perform the steps in the following article.

  Method 1: Solve printer problems.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  If the problem persists, contact the manufacturer of the printer for assistance

  http://support.en.kodak.com/app/contact/selected/true

   

  For your reference:

  Change an ink or toner cartridge

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-an-ink-or-toner-cartridge

• Cannot print from my Kodak printer

  Original title; Print printer printing

  I use a Kodak printer and is not print any word on paper.  Inkwells are full.

  Any help much appreciated

  Betty

  
  

  Hello

  • What version of Windows are you using?
  • What happens when you try to print?
  • You receive an error message?
  • What were the changes made before the problem occurred?

  You can check this link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• I have a new kodak printer which is a 7520 type but I can't use or repair

  I have a new kodak printer which is a 7520 type but I'm unable to fix it, the suffix that has been selected in terms of network installation!

  I'm sorry this is not clear, but I am disabled and bought the printer from QVC. He has worked with an old computer so I'm upset, but

  I didn't know that it was impossible to correct configuration of the printer with a wrong code!

  See you soon

  Gordon * address email is removed from the privacy *

  Hello

  I'm sorry, I couldn't seem to find this exact model for a Kodak printer number. Please visit the Kodak Web page and download the driver for this printer. http://support.en.kodak.com/app/answers/list/c/890/selected/true

  Once you have installed the new drivers, the printer should work just fine on the new computer. When you download the drivers, you will want to pay special attention to two things. First of all, making sure that you have found your exact printer model, and second, that you know which version of Windows you have on your computer.

  I hope this helps. Just reply to the results.

• Print spooler is not working, printers are missing from the printers and faxes, add a printer failed with operation could not be completed

  Hi all
  We have a problem on one of our field of PC:

  • Parts of the printer in printers and faxes are missing.
  • The print spooler service stops.
  • Add Printer failed with the operation could not be completed error

  Have tried the steps:

  1. Restart the print spooler service
     The service could be restarted, but stops again when I tried to do something in the windows printers and fax machines, such as adding a printer, or open the properties of the server.
  2. Follow the steps in Bruce Sanderson Web Windows http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm and http://members.shaw.ca/bsanders/FAQPrinting.htm
     All the steps have been followed, but still could not solve the problem.
  3. Follow the steps in the printer problems in Windows http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
  4. Run sfc/scannow
  5. Run Chkdsk C:/f/v
  6. Run utility HP diagnostic Print as suggested by http://www.theeldergeek.com/forum/index.php?showtopic=17339

  I'm out of ideas.  Someone please suggest what to do about it.

  TIA

  ELL

  Hi all

  Fixed a problem.

  It turns out the key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Providers must be cleaned too - delete all subkeys (and their values) EXCLUDES the Internet Provider LanMan Print Services and printing keys (and their values).  A reboot is required.

  Hope it will be useful for people who have this problem in the future.

  Thanks for these folks spend their time to respond or read my question.

  See you soon,.
  ELL

• Error 80200011 when you install the Kodak printer software.

  Original title: error 80200011

  I try to install my Kodak printer software and I get this error 80200011 at the end of the installation process. Can someone tell me what this means and how to fix it?

  Hi Treb20,

  ·         What is the model number of the printer?

  ·         You install the software from a CD or have you downloaded?

  You can refer to the following articles of Kodak and see if they help.

  What should I do if I can't install the software for my all-in-one printer?

  Problems installing software with all-in-one printer

• While trying to install the Kodak printer all-in-one on my Vista computer, I get the error "2147287035" system

  Original title: 2147287035 system error

  Hello

  Tried to install Kodak all in the printer software, then I got the error database error 2203 2147287035 tracking system - windows/installer\a720de.msi.

  Can you please help

  Thank you

  Hello

  If I understand correctly you have a problem with installing the Kodak all in a printer on your Windows Vista computer drivers. I would like to know more information on the issue, so that we can help you better.

  1. What is the error message or an exact error code?

  2. What is the Kodak printer model number?

  Let us try the following methods and check if it works for you.

  Method 1:

  Try installing the driver in a clean boot state. Place the computer in a clean boot state will help you to install programs without any interference from third-party program/application.

  Step 1: How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, try the procedure described in step 3 to reset the computer to start as usual.

  Step 2: Find and install printer drivers:

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Method 2:

  Try to install the printer driver in the Compatibility Center.

  Make older programs run in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Please respond with the State of the question, so that we could help you better.

• Printing fails after two pages.

  Original title: print Fail

  When I try to print I can't finish printing, lost more paper, printer tries to print again after failure same pages before a printed several times, I got an error via on report sheet printed for printing time.

  PCL XL error

  Error: ExtraData

  Operator: consulterles

  Position: 29

  How can solve this problem

  Hi tcmuhammed,

  -How long have you had this problem?

  -Did you follow the advice given by Gaurav?

  In the meantime, see the following articles:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Printer fails to print command.

  Printer fails to print the order, so I have to remove, reinstall and configure it works for a short period.  Then it's the same everywhere.

  I'm working on a G4 Mac with OS Leopard mirror door. (I can not upgrade to Snow Leopard because I work on a dinosaur)  The all in one Office Jet 6500 Wireless works best when I choose the Hello connection.  My hair is turning more gray with this problem.  What I am doing wrong?  I can scan, copy and fax... just can't print!

  I think that the problem is resolved.  I have now been printing everyday since the last post, and I had no problem.  I did an uninstall, reinstall and a config with a different browser.  I have an idea of what to do if things go haywire again.   Everything seems to go well so thank you!

• Kodak printer: "bidirectional printing is not enabled.

  Original title: "printer problem".

  My Kodak printer gives me a message that bidirectional printing is not enabled. the printer is directly related to our office and there is no problem if printing through the Windows 7 desktop.

  My Windows 7 laptop is on the wireless network. This is where I am getting warning all the time. How can I get rid of this warning?

  Here is a link to a response on the Kodak support site that sounds like it may solve the problem:http://support.en.kodak.com/app/answers/detail/a_id/1294/~/error-message%3A-%22bidirectional-support-is-disabled%22

• Cannot install Kodak printer getting error 0 x 00000002

  I've been back with computer Kodak and HP - technical support HP laptop with Windows 7 installed. They blame each other and are unable to resolve it without restoring my laptop to original settings (losing all my installed programs).  The Kodak printer is an ESP 6150 and it seems all the software and install updates, but when I try to set up the printer, it recognizes the printer is there and immediately I get the error message 0 x 00000002

  FINALLY... THE REAL SOLUTION!

  Here's the real solution directly from Kodak:

  The problem is with Windows 7 64-bit architecture. You will need this MS XML missing from here:

  www.Microsoft.com/downloads/details.aspx?FamilyID=7f6c0cb4-7a5e-4790-a7cf-9e139e6819c0&displaylang=en

  Click on the first download link: msxml.msi (2.0 MB). Download to your desktop or where you can find it easily.

  IF (IF) you've already tried installing Kodak with failure, uninstall the printer by clicking Start > Control Panel > programs > uninstall a program and choose all the Kodak software.

  Then click START, type RUN. Type services.msc. From there, you can see the list of current services. Find print spooler and select Restart in the upper left corner. If you see Hello or associations with Kodak, restart them. Click on exit.

  Return to your MS XML download and double-click it to run it. It will close automatically after installation.

  Now go to: http://support.en.kodak.com/app/answers/detail/a_id/17138/selected/true

  Download it on your desktop or where you can find it easily.

  Double-click it to run it and follow the instructions.

  It will work for Kodak EasyShare 5500 AiO as well as other Kodak printers.

  Breathe and the best of luck!

  Father Bowdern

• on a kodak printer

  I use my HP Envy 23 all-in-one, running windows 8.1, 64 bit on this site and I am trying to print on my printer Kodak ESP 7.  When I try to print a response to a question that gives guidance, etc. the impression that comes out is in Russian or Cyrillic or any other oriental language.  Can you tell me what is the problem?  I have no idea how to solve this problem.

  Hello

  Welcome to the HP support forum. Probably you need driver for it. Please visit the following site:

  http://support.en.kodak.com/app/answers/list/c/890/selected/true

  (I can't work on the type and model of your Kodak printer).

  Kind regards.

• HP printer fails on network until the power is recycled

  This HP printer fails to start on my home network, until the power to the printer is recycled.  It is a 2200 with 610n network HP JetDirect J4169A card model and the current version of the firmware (L.25.57).  When the XP - Pro computer is started, and then the printer is turned on, the printer is not recognized.  Nothing is displayed when we sail to http://192.168.x.xx at HQ to the printer is turned off and then, the printer works normally, and the http://192.168.x.xx page is normal.

  I put the IP address of the printer and for each computer on the home network with 'IP configuration manual method' to 192.168.x.xx recognized once on the network that the printer does not print normally.

  The series of events is the following: computer XP - Pro and network router work normally.  I turn on the printer for the first time.  The printer is not recognized.  Using Internet EXPLORER 7 and tempting to commit to http://192.168.x.xx produce an error message.  I switch off the power to the HP printer.  I turn on the power.  Then navigate to the http://192.168.x.xx , I get the familiar screens showing details of the printer.  I am able to modify them if necessary.  The printer seems to work normally.

  I just need the printer to start normally the first AC power is on.

  A user on the forum Fixya said: "looks like the Jet Direct card is faulty." Replace it. "This solution worked. I understand not there is not a way to run diagnostics on a 610n to determine whether there is in the plug. I did buy a used card and find that it works OK. I'll avoid the upgrade of the firmware since firmware in place on the 2nd map starts OK each time the printer is on, and it seems that there are no additional problems with printing.