Kodak printer: "bidirectional printing is not enabled.

Similar Questions

• hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  hp 8600 printer cannot be contacted over the network and the printer is not enabled.

  the HP software installed on the PC on the floor. Print wireless from PC upstairs and the PC in the basement on the network for the last month up to yesterday

  Now to receive above - two error messages cannot be contacted ove RL network and the printer is turned off.

  Reality - the printer IS on and the PC on the floor can print to the printer.  Network on the printer symbol says it is connected to the network.

  a reason any PC in the basement all the cant suddenly find the network and the printer?

  Hello

  The first thing I would do is follow step 6 in this document to set a static IP address: http://support.hp.com/us-en/document/c02817031
  When it askes for the DNS information, enter in Google DNS. Preferred DNS = DNS Alt = 8.8.4.4 8.8.8.8

  This could increase the stability of the network connection to the printer downstairs.  If this does not help, let me know what OS is on the computer causing problem, because that could cause a problem?  Other than that, you can check the quality of the signal you get form the network and see if this can be a problem.

• Kodak printer does not print

  Kodak, printer all in one 3.2 used to work, but not now.  They have spent hours on the phone with the help of Kodak finally decided it was a windows problem.  I can't get any help here at all.  The message is: "windows found a driver software for your computer, but has encountered an error trying to install it".,.

  and "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.

  Hello Gayle,

  Thank you for your response.

  I'm sorry for the late reply.

  I suggest you to status of print spooler service and clear all print queues. Please follow these steps:

  a. press Windows + R keys, type services.msc in the run window and press ENTER.

  b. double click on "Printer Spooler" in the services list.

  c. click on "stop", then click on ok.

  d. press Windows + R key, type %WINDIR%\system32\spool\printers in the immediate window and press ENTER.

  e. in the window that opens, remove all files in the folder.

  f. you can again to get the list of services and double-click "Printer Spooler".

  g. make sure that the startup type is automatic.

  h. If the service does not, under "Service status", click on "Start" and then click ok.

  I hope this helps.

  Thank you

• Printer Spooler not enabled: my printer does not print and my computer does not load the disc from the printer

  When I try to print a document, I get an error message saying my printer spooler is not active or currently running.  When I search my printer on the computer, it went, so I tried to charge it and it wouldn't let me install the printer.  Can you help me please?  Thank you.

  Hello

  1. what happens when you try to reinstall the printer?
  2. do you receive any error messages?
  3. What is the brand and model of your printer?

  Please provide us with some information so that we can help you solve the problem.

  You can consult these articles for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• spooler print does not preach

  When I want to print, there is a message that the spooler printing is not enabled.

  I go to computer management, Services, and spooler = activate automatically.

  It makes no difference

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• Well 5 hours 3 technicians Kodak this morning and my Eastman everything in a 5250 printer is not yet installed. Nobody seems to be able to install it

  While a 5250 printer and not yet installed, why it will not install and connect that is the question? 5 hours abnd 3 technicians with Kodak not able to connect.

  Eleanor,

  Need information. Your computer is it upgraded to Windows 7 or did it with Windows 7?

  Please tell me your virus protection and firewall.

  Also start searching for information system REMOVE YOUR PRODUCT ID and post the rest of feedback here.

  If trying to use the wireless adapter, make and model of your wireless router and the type of security you are trying to use. Also tell the channel if it is known.

  Rick

• My lexmark X 7550 printer will not display when uac is enabled.

  Original title: user account problems

  My lexmark printer will not display when uac is enabled. I have a lexmark X 7550. Someone has any ideas

  Hello

  1. what happens when you try to print the User Account Control (UAC) is enabled? You get the error message? After return the correct error message if applicable.
  2. you are connected to a user administrator account?
  3. don't you make changes on the computer before this problem?

  I suggest you install the latest printer driver and check.
  http://support.Lexmark.com/index?locale=en&ProductCode=LEXMARK_X7550&UserLocale=en_US&segment=download&OS=WINDOWS_VISTA&page=downloadsList&oslocale=en_US

• SE error message: printer could not be removed. Error 0x000006be"and new Kodak 7250 printer do not print

  Original title: new Kodak 7250 printer print a vista computer

  I'm trying to help my brother who lives in another State set up his new printer Kodak 7250.  After you install the software it is plugged into the USB port.  Vista has detected new hardware and did his thing, and everything seemed good.  However, it would not print from the computer.  The printer is listed and selected status, however, stated that it was not connected.  We contacted Kodak tech, they take control of his computer.  They have tried to delete the printer but could not... "Printer could not be removed... Error 0x000006be ".  Tech said problem wasn't Kodaks and contact Lenova on bad print spooler.  We checked the print spooler, which was running and in auto mode.   We tried several times to remove the printer and start over, but shows the same error.  Any help from anyone would be appreciated.  BTW, her worn old HP printer had no problem.

  Hi vbrown7,

  You can try to let flow the Fixit and see if it helps:

  Links:

  Problems of print and error - a Mr Fixit of printing

  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit

  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  Also see the article and check.

  Error message when you try to connect to a print queue in Windows Vista or in Windows Server 2008: "Windows cannot connect to the printer. Impossible operation completed (error 0x000006be)»

  http://support.Microsoft.com/kb/946394

  You can also check out the following link and try the steps suggested by Arthur Xie Microsoft, Moderator on Monday, June 1st, 2009 09:39

  http://social.technet.Microsoft.com/forums/en-us/itprovistaprinting/thread/3e47b7b6-00A3-47E1-9e28-e615fbff5f87/

  1. you use an administrator account?

  If this isn't the case, then you should use the administrator account and check.

  Also, try to create a new administrator account and check if the printer is able to be viewed / deleted.

  Check out the link:

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Kodak esp5250 printer does not print

  printer does not

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  ·         Do you get any error message when the printer not responding?

  ·         What operating system is installed on your computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Open the printer Troubleshooter and check if the problem persists, follow the steps in the link to open the printer Troubleshooter:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2:

  If the previous step fails, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• Dell v313 printer - my printer is not communicating with my computer - I need enable two-way communication in the printer properties

  My printer is not communicating with my computer. He always tells me to activate the two-way communication option in the printer properties dialog box.

  How can I do this?

  MichaelMcQuillar,

  Please check your virus protection and firewall. They seem to block communications from the printer.

  Rick

• KODAK ESP office 2170 does not print in black and white

  My KODAK ESP Office 2170 fails to print in black and white.  I changed the cartridge and carry out controls without result.  Any ideas?

  Hello

  
  -You receive an error message while trying to print?
  -What is the model number of the cartridge you are using?
  -What are the types of documents you want to print? (Microsoft Word, Excel, e-mail, Pdf etc...)
  -How you want to print? You try to print from Internet Explorer?
  -Did you do changes on the computer before this problem?
   
  As the issue is limited with Kodak printer, I suggest you to contact the support of Kodak since the link to get help.
  http://store.kodak.com/store/ekconsus/en_US/PD/ESP_Office_2170_All-in-One_Printer/ProductID.227123200
   
  Also, I suggest the test print and check if it works.
  Hope this information helps.

• I downloaded the new software recently and now my Epsom printer does not work

  iMac late 2009. Processor 3.06 GHz

  Hi, I downloaded the new software recently and now my Epsom printer does not work and my Wi - Fi on the computer keeps dropping out.

  I spoke with Epsom and they recommended to remove the drivers and reinstall them. Now, I can not install the ad pilots Wi - Fi does not work correctly. The research on this forum I see there have been many problems with the new version of the software. Can someone help me?

  < re-titled by host >

  Try a reboot.

  Make a backup using Time Machine or a cloning program, to ensure that data files can be recovered. Two backups are better than one.

  Try to set up another admin user account to see if the same problem persists. If back to my Mac is enabled in system preferences, the guest account will not work. The intention is to see if it is specific to an account or a system wide problem. This account can be deleted later.

  Isolate a problem by using a different user account

  If the problem is still there, try to start safe mode using your usual account.  Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.

  Safe mode - on El Capitan

  Start Mode without failure-El Capitan.

• Sharing printers has stopped working for me. MacBook Air "think" printer is not connected.

  Sharing printers has stopped working for me. I have an Epson Stylus Photo R340 connected by USB to my Mac Mini end of 2012, and until recently, my MacBook Air has been able to print to it. Now, he 'thinks' the printer is not connected. Computers are on WiFi. Both computers have an OS X 10.11.5 now and the latest driver of Epson printer. Printer sharing is enabled in preferences, sharing, and "Share this printer on the network" is checked in the preferences, printers and Scanners. I went through the hoops to remove the printer and add it again on the Mini and the MacBook Air.

  Of course, the Mini prints very well via USB. Someone has an idea (that I have not already tried) how to get the sharing of printers to work again?

  Other sharing services work, such as the file and screen sharing?

• Want 4500: I get a message saying that the "the printer is not connected.

  I just bought a HP Envy 4500 all in one printer.

  I can't print to it without having to restart it every time.

  I get a message saying that the "the printer is not connected.

  I can access the built-in web server, so I am sure that it is connected.

  It seems that he is going to sleep but cannot be awoken by activity.

  I checked network settings changed and tried to change the Hello Service of priority higher to 9100 (because the default Internet Printing Protocol) seems odd, but makes no difference.

  The State indicates that the power of the wireless signal is 5 - that sounds just because it's six feet from my PC that has a great wireless signal.

  I uninstalled and reinstalled the printer.

  The restart is only viable if the printer is restarted and sent instantly - work if you wait a few minutes (energy saving option is set to 15 minutes and it's inside that) is the same thing - the said printer dialogus "Opening conection printer" and then, almost immediately, "the printer is not connected.

  If I try to scan I get an error-9923

  Hi @jpkeates,

  Welcome to the HP Forums!

  I understand that you can not print with your HP Envy 4500, once he falls asleep on your computer Mac OS X 10.11. I'm happy to help you!

  Please, try the steps in this guide, "printer offline" or "printer not responding" Message (OS X). It is also important to ensure that:

  Make sure that the multicast is supported

  If you use a wireless network, make sure that muticasting is supported and enabled on your router.

  If the new connection is working, you know that the printing problem is tied to the computer.

  If the new connection does not work, then the printer may need to be repaired or printed using a different type of connection.

  Disable IPv6 (network connection)

  Disable IPv6 on the printer to make sure IPv4 is used on your network.

  If your printer has a control panel with display, find the IPv6 settings in the advanced network configuration menu and set it to Off or disabled.

  If your printer does not display, use the built-in web server (EWS) to disable IPv6.

  From a computer on your network, type the IP address of the printer in the field URL of your Internet browser.

  NOTE:

  If the Web page appears empty, try another Internet browser.

  Click on the tab network or network, and then open the section or page corresponding to your type of network - wired or wireless.

  Select enable IPv4 only (or similar).

  Figure: Configuration example IPv4 using an integrated Web server

  

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope this guide and help the steps!