Kodak RFS 3600 Film Scanner install on windows 7

Similar Questions

• Scanner install problems - Windows 7 (64-bit)

  Recently upgraded to Windows 7 (64-bit) and everything was fine until I tried to replace my flat bed scanner and are now trying to get two scanners work. First scan was listed (as was the second on the compatibility Web site) Scanner Canon CanoScan LiDE200 USB. Went on Canon's site and downloaded the Win 7 scanner software and installed (after removing the previous version). Tried running the software and got a message "memory" and has been unable to act. Went to 'devices' and 'right click' the scanner and was able to scan using the windows software, so scan worked. Original printer took over and bought an Epson v30 scanner, same problem, installed new software (Epson Scan 3.04). Doulble click on the shortcut of Epson Scan, but nothing happens.
  A scanner does not and I think it's the materials, but both makes me think it might be something else, please notify

  If Irfanview doesn't mean that you are 'Twain' drivers are the problem.

  I have a Windows XP roceedure that usually fixes this kind of problem, but have yet to try it on Windows 7. I posted it below in case you are interested, but go forward with caustion. Note that some of the steps/information I already posted, but I'll post the procedure in his entirerty.

  ---------------------

  If you connected the printer multifunction/scanner to your PC and then
  installed the printer drivers/software, the chances are very high
  the printer can operate but function scanner will not.

  Most scanners or printers of multi use require
  that you install the software before connecting the scanner or printer/scanner.

  Step by step instructions:
  (1) unplug the MFP or scanner.
  (2) uninstall the printer/scanner software and two pilots to help
  the Add/Remove Programs option.
  (3) look/search folders associated with your printer/scanner model
  contains "Twain" files, if the files still exist after uninstalling.
  Delete these files and related files.

  Note: In the list of files that is found you can ignore everything
  files listed in:
  C:\Windows
  C:\Windows\system32\...
  C:\Windows\ServicePackFiles\...

  NOTE: In the C:\WINDOWS\twain_32 folder: you have
  one or more files. The one of "do not delete" is called: wiatwain.ds
  (wiatwain.ds is installed by Windows XP)
  All files in this folder were likely created when you
  installed the printer/scanner. Check each of the files 'Properties' and if has the
  brand of your scanner (Epson, Canon, HP, etc.), identified as the
  company/brand, these files can be deleted safely.

  On my PC I have my scanner HP twain file located in:
  C:\Program Hewlett-Packard\Precisionscan Pro 3.1\TwainCtrl.ocx
  There should be something similar on your PC, so in my case at least
  I would like to uninstall the software of Scanner HP and if it ' file TwainCtrl.ocx
  is still there after you have uninstalled the scanner software I would delete it.
  I have also a second that the file named "Twain_32.dll" TWAIN located:
  C:\Program Files\Adaptec\Easy CD Creator 5\PhotoRelay

  (4) check the Device Manager and remove all the entries if necessary.
  (5) create a Restore Point
  (6) analysis the registry using the name of brand/make of the scanner as a keyword for
  image search. (Remove all entries are, but make sure it's a connected scanner entry)
  7-restart the PC and check once more the Device Manager.
  It should not show any announces the printer/scanner.
  (8) now reinstall the software and two pilots.
  (9) shut down the PC.
  (10) the PC power turned off, connect the printer/scanner, then
  restart / Windows startup.

  Note: Sometimes there might help you try a different USB port if you
  printer/scanner is a USB device.

  An easy way to test your installation of the twain driver software work, s
  is to use a graphical editor named IrfanView.
  http://www.IrfanView.com/

  If you download, install and run this software,
  located in the menu bar is an option named "file".
  By selecting the 'File' option, you should find a
  (near the bottom of the list) option for named:
  'Select the TWAIN Source', click this option
  and then a popup should display valid Twain sources
  for scanner you. If you see your scanner from the list,
  Select it, and then try to scan an object (picture).

  By selecting the Twain Source in the file menu IrfanView should load
  your scanner software and then scan.

  If you choose the option "Copy Shop" also in the file menu you have the
  possibility to bypass your scanner software and directly scan a photo in
  IrfanView. Try the option "Copy Shop" and let me know what happens.
  Note that "Copy Shop" list of your Photo editing/scanning scanner
  software and hardware name (make and model) of your scanner when
  you click on the button "Select Twain Source" of the photocopy shop.
  You should choose the scanner hardware option.

  For example, on my PC the software Photo retouching/scanner is named:
  «HP Precisionscan Pro 3.1 "»
  The second entry "Twain list select the Source" Copy Shop is my scanner
  brand / model that shows that:
  "WIA-HP Scanjet 5470 C 1.0"

  So for me when you use Copy Shop, I select the second entry when
  prompt to select the Twain Source.
  I then check the 'Twain with the preview.
  (I mark this option if the scanned image does not directly)
  to the printer, but on the contrary is displayed in IrfanView).
  Then I click on the button 'start' location has the lower part of the photocopy shop
  window to start the search.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Kodak esp3250 drivers do not install on Windows XP Professional 64-bit

  Hello

  I just want to ask if it is possible to download drivers for my Kodak ESP 3250 printer. I heard that it is not compatible with Windows XP Professional 64-bit machines, but I think that it is not true.
  Thank you
  Zuga01

  If you really have XP Pro x 64 (which is rare), you're right that current software/driver Kodak for its all-in-one printers (including the ESP 3250) will not work for your operating system.  See http://support.en.kodak.com/app/answers/detail/a_id/32108/selected/true

  It is possible that Kodak may have an older version of its software that works.  See http://support.en.kodak.com/app/answers/detail/a_id/23858/related/1/selected/true

• Install the Kodak ESP5250 printer software and install Windows updates

  My father-in-law bought a Kodak ESP5250 printer last week, we tried to install the software without success. I was even in remote access with Kodak technology for 5 hours. There seems to be a problem with Windows Vista that will not allow the software to install. In addition, the automatic update of Windows has tried for more than a week to download and install updates of security on his computer, he has let stand for 24 hours and it will not install updates.
  He runs a Dell 1545 with Windows Vista service pack 2 Dual Core T4200 CPU and 3.0 GB of RAM.
  Can you help me solve these problems?

  Hi kcbell1953,

  Thank you for the information.

  Did you follow the steps I have provided?

  I suggest to follow the steps mentioned in the previous post and then try to install the printer software.

  You can try the following steps to install the windows updates:

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  Step 2: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Activate security software once everything is done.

  Step 3: Put the computer in a clean boot

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Now try to install the updates, try to install only some updates at the same time.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

• Cannot install updates Windows XP error Code 0 X 80070670

  original title: CANNOT INSTALL UPDATES WINDOWS XP ERROR CODE 0 X 80070670

  CONTINUE WITH WHAT?

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Canon BJC-50 printer and scanner work with Windows 7?

  I have a printer Canon BJC-50 with the cartridge scanner.  I ordered a USB to parallel cable adapter must be able to connect to my laptop, because I do not have a parallel port.  The Windows 7 compatibility page says that this printer is compatible with Windows 7.  Canon said that it is not.

  Has anyone successfully connected and used a Canon BJC-50 with Windows 7?  If so, were there any problems?

  HI - same issue with Canon BJC-80. Says Windows is compatible and Cannon did not write! My BJC-80 prints OK with a USB/parallel cable and install via Windows 7 OK - but printer response time is in minutes to hit a comand "Print" in any program, for example. MS Word 2010?

  Suppose that we are victims of the creep of technology and need to buy a new printer - shame I have heaps of cartridges left!

• Trend Micro Titanium Internet Security won't install on Windows 7

  I bought a three user anti-virus (Trend Micro Titanium Internet Security) that will not install on Windows 7.  When I insert the CD it reads and seems to do something in the background, but there are has no windows that pop - up.  Also when I look in the Task Manager, I find no trend activity there.

  The version is a version licensed for 12 months I purchased with a new PC.  He said only Trend Micro Titanium Internet Security on the cover.

  If you have any other scanners 'real-time' installed (including MSE) it may be useful to backup your PC (so in the worst case you can go to at the moment), update scanners already have installed and then run a full scan with them to check the malware.

  Then completely uninstall, restart the PC and then see if the trend settled.

  See - http://support.antivirus.co.uk/trendmicro/kbresolution.jsp?hmid=52385&serviceId=31&applicationId=196 which States " ""with more security software or their components installed on your computer can cause performance problems. The programs in this conflict peut with your program of Trend Micro Titanium, are listed. "You must remove these of security software before installing Titanium: '

  I didn't trend and have never tested, so I can't say with certainty that their list of possibly conflicting software is preventing you installation trend, but it shouldn't take too long to remove all other scanners time real AV/Malware in article of trend and see. If the worst comes to the worst, you can always reinstall.

  You must have an AV program installed and running on a PC. On-Demand Scanner like free Malwarebytes Anti-Malware is OK as backup on demand scanners. (if you install this edition special anti malware utility, keep free, no need to start testing etc UNLESS you wish to purchase additional features the paid for version does not provide).

• Kodak Hero 9.1 and installed, to the point where the pilots are downloading, I get the error "operation not complΘtΘ 0x00003eb.

  I come from Kodak Hero 9.1 bought and installed, to the point where the pilots are downloading, I get the error "operation not complΘtΘ 0x00003eb" Kodak say it of to do with Windows, but how to get assistance, an idea (which seems to have started since my last automatic download for service pack 1, maybe irrelevant)

  Hello

   

  Thanks for asking!

  When you try to install the driver for Kodak Hero 9.1 you receive 0x00003eb. error code

   

  To help you better, we need more information.

   

  When you click on the dialog box, you receive information about the error?

  To work with the issue, I suggest you follow these steps:

  Method 1: Clean boot

   

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

  See the mentioned site:

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 3 of section to set your computer to normal startup.

  Note: If in case, you are connected via a connection wireless, and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check wireless see corresponding section are checked (enabled).

  Method 2: File system (CFS) Scan Checker

  SFC scan will find all missing or incorrect system files and repairs them.

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

• Impossible to install 10 Windows on Bootcamp partition

  #1

  Hello! I just tried to install Windows 10 on my Macbook with a 32 GB USB using Bootcamp. Everything was fine until I came to the part where I have to choose the partition where I want to install my Windows 10 and of course I chose the Bootcamp partition, but in fact I couldn't click on 'next' (I was so stupid and don't format it).
  So I just format the Bootcamp partition and when I tried to click 'next' he just told me 'we could not create a new partition or locate an existing one. I went through google and searched all regarding this problem and there are a lot of guys having almost the same or exactly the same 'error' when trying to install 10 Windows on the Bootcamp partition, but nothing has really helped me. I deleted everything except my USB key and someone told me that I should only have 4 partitions or less.
  He shows me the 4 partition but there are two partitions (3) and two partition (1).
  Is this a problem?
  Here is a picture of my diskutil list: https://i.gyazo.com/f554fb8aac609c2420f55f9696fa06a6.pnggiven that English is not my native language, I'm sorry for my bad spelling.
  I hope someone can help me install Windows 10 with Bootcamp! Thank you very much!

  You have a Fusion drive, which is usually not sold on a MacbookPro? You can check model/year your Mac? Please, do not post the serial number of your Mac.

  If you replaced the optical drive to create your own Fusion player, you can run the questions, depending on the year/model of your Mac.

• iCloud error after installing the windows update 10 v.1607

  After you have installed upgrading Windows 10 to v.1607 (adding birthday) my icloud will not install on my Windows Office/outlook.

  I have deleated and installed the latest version of icloud, but I get a message that icloud is not installed correctly.  Make the repair on Icloud, but still does not work.

  After you remove or uninstalled, restart?

• How to use fonts (installed in Windows) Mistral in Thunderbird 38.0.1?

  Mistral and several other fonts are installed in Windows 7. In earlier versions of Thunderbird, I was able to use the MIstral and all other fonts in Windows without difficulty. Mistral and many other fonts in Windows 7 are now available in Thunderbird 38.0.1.
  Why these policies - in particular Mistral - are now unavailable in Thunderbird 38.0.1 and how can I fix this?

  I use Mistral for my personal signature and it is extremely annoying and irritating to find it is suddenly unavailable.

  Your help will be appreciated.

  Thank you

  Gloria Eive

  Nadine said

  Mistral and several other fonts are installed in Windows 7. In earlier versions of Thunderbird, I was able to use the MIstral and all other fonts in Windows without difficulty. Mistral and many other fonts in Windows 7 are now available in Thunderbird 38.0.1.
  Why these policies - in particular Mistral - are now unavailable in Thunderbird 38.0.1 and how can I fix this?

  I use Mistral for my personal signature and it is extremely annoying and irritating to find it is suddenly unavailable.

  Your help will be appreciated.

  Thank you

  Gloria Eive

  Thank you, Matthew, but I fear that we have still not solved the problem of Thunderbird.
  Mistral is a TrueType font and was readily available in all editions of Thunderbird before the current version: 38.0.1.
  Of course the technicians who designed this update have changed something in the program so that TrueType fonts are no longer available. I need to use the Mistral. Parameters of the italics and the other options available in Thunderbird 38.0.1 are not acceptable.

  The question is "How can I access TrueType fonts in Thunderbird 38.0.1?

  Thank you very much
  Gloria Eive
  [email protected]

• Question seeks to clean install 10 Windows on the drive of the merger. El Capitan.

  Problem: try a clean install of Windows 10 via the Boot Camp Assistant on an iMac 27 inches (Late2013) with 10.11.4 installs hours (more than 8 hours) and then failed to install Boot Camp updates. Essentially installation take much long than normal and cannot install updates of the Apple software or create normally start Windows Boot Camp 10.

  Background: After problems of slowing down after upgrading to 10.11.4 (with improved Bootcamp Windows 10) who had previously worked fine for 10 months, to the point of a start of OS X time, I decided to do a clean install of my iMac with Fusion 3 to disk.

  As I was unable to remove the partition from Boot Camp through BCA because of his holding always at the same load, I used Internet recovery and reset the Fusion drive. This then required me to repair the partition of Fusion by car through THE "fix" option which seems to work very well. And reinstalled OS X 10.11.4 which works fine now (delays etc..)

  Try using BCA to create a new partition Boot Camp and a clean Windows 10 install after downloading an image of disk W10 directly from Microsoft (Win10_1511_1_English_x64), BCA by downloading software updates and by selecting the desired partition, it began to restart and initialize the installation. However the whole process has been very slow, each step takes much longer than usual, to progress. Leave for hours rest a blank screen or with a circle of rotation.

  I tried with another stick USB 3 and also a USB 2 stick, but none has made a difference.

  In the last attempt, I left running overnight and after 8-9 hours, he finally reaches the top of desktop Windows 10 and the update of Apple Bootcamp starts to load updates. However, he just hung and even after 2 hours, nothing was. Reboot and try once again has been the same.

  After that I tried to create a Windows Installer via BCA 8.0 however it gives just a TPG error when you try to select the drive (due to el Capitan I guess?)

  After four days of efforts, I'm a loser on how to get the Windows 10 on the Boot Camp partition. I can't even install W8 and upgrade due to the error of TPG.

  Any help or suggestions how to proceed with the diagnostic / resolution of the problem would be appreciated.

  Details:

  System: iMac (27 inch, end of 2013), 3.4 GHz Intel Core i5, 16 GB 1600 MHz DDR3, NVIDIA GeForce GTX 780 M 4096 MB, OS X 10.11.4

  • Nothing other than the keyboard and mouse attached via the USB ports, as well as the key USB of BCA. No other attached devices.
  • Reset memory NVRAM, SMC and ran more than once disk utility. No problem not reported.  Ran NVRAM reset before each attempt.
  • At ran EtreCheck report which seemed OK.
  • Verification of diagnosis ran who is childless.

  A detail I noticed after the merger by car there are now two Macintosh HD images when you use boot option. One previously. Are named "Macintosh HD" and "Macintosh HD2". I remember being Yosemite simultaneously in three, but which has been fixed in an update.

  In addition, it seems that no recovery partition. Cmd + R lance Internet recovery.

  Distill the results (the Boot Camp partition removed):

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk2 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk2

  1: disk2s1 NO NAME 209.7 MB EFI

  2: disk2s2 Apple_CoreStorage TB 3.0 drive internal

  3: disk2s4 Apple_Boot Boot OS X 134,2 MB

  / dev/disk3 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk3

  Logical volume on disk0s2, disk2s2

  7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  Fusion unencrypted drive

  iMac - simon: ~ list of cs simon$ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group CA0B8D0A-6315-4E85-B313-52AB509473F2

  =========================================================

  Name: Internal drive

  Status: online

  Dimensions: 3121237860352 B (3.1 TB)

  Free space: 0 (0 B) B

  |

  +-Physical volume 5E75EE74-EE1F-4FCB-A0C5-9ED5517FEB93

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 91D639D6-634E-47C1-AFE5-616CE12E71E0

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk2s2

  |   Status: online

  |   Dimensions: 3000249008128 B (3.0 to)

  |

  +--> Logical volume family EE9934AC-F3CB-4101-ADB6-576F4371B4B9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 7BE1F343-ACBE-4144-BF86-C838BE1E49D4

  ---------------------------------------------------

  Disc: disk3

  Status: online

  Size (Total): 3106705375232 B (3.1 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  Summary:

  Q1: Should it take 4 + hours to install Windows 10 via BCA?

  Q2: Al must ultimately be so slow when initially W10 desktop?

  Q3; What I do once I arrive at the office of W10 but it automatically updates the graphics driver as BC update is simply suspended for centuries and get a working driver to restart at least W10?

  Q4: is there a problem with the disk HARD the Drive of Fusion that is causing all this delay and slow install / boot? ON the clean install OS X 10.11.4 it is back to be fast as usual and all tests show things are OK but W10 goes on the part of the HARD drive. No way to verify this beyond diagnosis or Etrecheck?

  Q5: Y at - it no problem with the GPT / MBR that may be causing the delay etc. ?

  Q6: How can I use my existing WindowsImageBackup backup from the previous W10 with the BCA install usb drive or how to create a USB stick otherwise recovery disk with my other single Mac have W7?

  Q7: How can I install W8 as I once did on Yosemite, via el Capitan without a mistake to TPG on selection of disc?

  Details:

  Day 5. Attempt at 6.

  Partition Boot Camp delete and try again install via BCA. First question, is that when the startup it goes to a blank black screen. For a time nothing left. Reset then using alt to select windows training results in almost instantaneous startup of the BCA message created and the beginning of the installation.

  4 1/2 hours from start of Windows 10 initial signature window.

  Then the second question. One to reach the Boot Camp update Office tries to start and install the drivers. Allows you to "list files...". "stage then sits at the bar about 5% green for 1 to 2 hours and does nothing. All actions in the Office of the W10 takes ages.

  In the meantime, auto update of the W10 appears a message saying that the updated graphics drivers as one of the few messages or actions during this period. Looks like Nvidia install with the entire package of experience (unwanted) etc. and very probably not the correct gpu driver.

  Finally deciding to cancel the installation of BC by killing the Setup.exe process. Then copy Boot camp install files on the desktop. Lasts 30 minutes to copy. Run again and this time, although taking 15-20 minutes to download and install later with the success message.

  Check the graphic driver it shows a yellow exclamation mark, so the following Microsoft instructions I use the uninstall option via the device and then Manager (slowly) come on board to load and download the latest Nvidia driver on their site for the GTX 780 M for 64-bit W10 etc. The same thing that I had used previously. Slow with running the Nvidia Setup program again, but eventually it works only to say that he could not install as unrecognized graphics device...

  He ends up with Microsoft PnP driver so it's at least sufficient start and run it again BC of the figure updates as all other drivers have been installed. To restart, but I get an error of K-Mode that is most likely related to this driver graphic and not possible to start in the new W10 Boot Camp partition after 7 hours.

  I have a picture of W10 backup recovery (WindowsImageBackup) I've had in a few weeks, but it will not install bet for the installed W10. I try with the ACO created the USB windows but can't seem to get a way to get into recovery mode and to get the menu to install it. I don't have a way to create a USB W10 recovery key now because my other Mac has just installed W7.

  Finally I tried to count a reset of the Recovery boot up option but it seems that it will take longer to start.

  I also went to the recovery and selected Boot Mode safe, but it opens on an empty black window and he's here doing nothing.

  Looks like I'll have to restart on via BCA and reinstall and try and solve the problem of graphics in order to install driver updates from BC and restart to W10 and hope that with the drivers, it returns to the operation and the normal starting time. Then update the gpu driver.

  I used and installed Boot Camp several times with over the years including previously an upgrade of W8.1 > W10 I used for over 6 months without problem. I've never known these installation very long or ice once in Windows even for the initial start upward.

  For any help or suggestion would be appreciated, and this seemingly simple process has now expanded to five days.

• HP Pavilion - 15-p264na: audio beats does not open after a clean install of windows 8.1

  Hello

  After a clean install of windows 8.1 the audio beats does not open.

  It appears in the control, but when I click on it nothing happens.

  I have sound, and everything seems to work ok, but I'm curious to know what happened.

  When I go to Device Manager and select audio, video controllers and game, there are 2 features 1 is AMD high definition audio and the other just says high definition audio device.both drivers are up-to-date.

  I look through the forums CIHI and I tried some of the links for the drivers of the itd, but they will not install.

  Any help would be appreciated

  Hello

  Download and reinstall the Realtek HD Audio software at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69164.exe

  When the installation is complete, restart the laptop.

  Kind regards

  DP - K

• error message iTunes displays locked drive, itl locked files, or do not have administrative privileges on the PC after a clean install of Windows 10

  Yesterday I did a clean install of Windows 10 on my PC with a backup of the hard disk external. I downloaded iTunes, but get an error message that the drive is locked, the .itl files are locked, or I don't have administrative rights to these files. I deleted and reinstalled the PCI DSS several times correctly in the PCI slot hoping that would be a solution, but to no avail. I am the only user on this computer and do not have administrative rights. Any help you can offer will be appreciated. Thank you

  This can help (from turingtest2):

  Fix iTunes for Windows security permissions