Lenovo y550p nothing working on the keyboard
Hello
I've been using lenovo Y 550p for the past 4 months. It was working great until yesteray.
Now the mouse pad, keyboard, slidnav, onekey theater, onekey dolby and even control volume on the right side buttons are no longer works. Only the power and the recovery of one-key buttons still work. Every thing in dead on my keyboard!
I reinstalled drivers synaptic as suggested in other threads, but still can not get the job done. I checked the other threads, and it seems that no one else has all these problems at the same time. Can anyone help on this?
Restart your computer, and press f8 to load in safe mode when you see the lenovo logo.
then right click on my computer > manage > device management > find your keyboard and right click and delete. Then, restart your computer in normal mode and check if it works. If the problem persists, because some applications can cause, I suggest to run windows own installation, if it does not work, contact support line of lenovo for replacement (keyboard)
Tags: Lenovo Notebooks
Similar Questions
-
Satellite 200-170-keyboard does not work and the keyboard stops working
My U200-170 2.5 years, I have the following problem:
When after the start of the key is opperated the keyboard does not work and the keyboard no longer works (works until the button is pressed) connect a keyboard and a usb mouse. does not work because that device unknown. After Internet received external usb driver work ok. someone at - it an idea to solve this problem.
Thank you
AJAN
Sounds like keyboard problem.
The operating system uses the pilot to clean keyboard and generally it s not necessary to reinstall the special keyboard driver.
But one thing is really strange; the yellow exclamation mark in Device ManagerEventually it s only a problem of software in such a case, a system restore can be useful...
Have you checked if the keyboard works in the BIOS?
Do this!If the keyboard does not work in the BIOS, then you will need to replace the internal keyboard with the new.
-
How to do a system restore with windows 8. my mouse is not working but the keyboard works
How to do a system restore with windows 8. my mouse does not work but the keyboard works.
I've updated some drivers and now my mouse does not work
Press the Windows key and press 'R '. Type "appwiz.cpl" without the quotes in the box run. Use the arrow keys to scroll down for updated drivers. When the driver is highlighted Press 'enter '. Use the arrow keys to select Yes in the uninstall confirmation dialog box. Restart the computer.
You can run the restoration of the system from a command prompt if you are unable to uninstall the drivers. Press the Windows key and 'X', use the arrow keys to select the type of command (Admin) line "rstrui.exe" without the quotes. Use the arrow keys to navigate the windows system restore.
Jim
-
Text element stops working with the keyboard navigation
I'm part of text for some reason disabling any and then enable it. Unfortunately, after you activate the text element, it stops working with the keyboard (with the tab key) navigation, and the cursor does not move to the order of the day. Could you please throw some lights? I'm stuck here! Thanks in advance.Hello
After allowing one more time, you must set its navigable property to true.set_item_property('item', NAVIGABLE, property_true);
Please indicate if it helps you or correct
Danish
-
Imen quite so much as the title, when I try to put my computer to sleep the screen turns off but the computer is still running. My computer is a HP pavilion dv6 is a little more than 3 years. He used to do whenever a while, but now it's every time I try to pause. I'll close the top cover, but the fan still works, the hp on the lid logo light remains lit, and if I reopen it cover the power light is always on and the lights on the keyboard caps lock and wireless keys. The same actions occur when I try to put it to sleep manually (from the start menu). It does not at all I have to do another that now hold power, but even when I do nothing, it will stay here like this for awhile and then just turn off completely.
When it starts up, it gives me the options to start in safe mode or start normally, and when I am connected and it gives me the "windows has recovered from an unexpected shutdown", I see that there is a minidump file in windows that has something to do with it. I tried to search for the file and the problem together, and then each separately, but nothing I've seen described really my problem, so I thought I should just ask on my problem.I read what made other people, changing advanced power settings, changing the media settings, etc. and did those things, but to no avail. It's not a huge deal, because I can just turn off my computer whenever I'm done with it for now, but I don't know if it's a bad omen for the future of my poor computer. So if someone could give me a hand with this point in mind, I'd be very happy. Let me know if provide more details (OS, processor, my favorite color, social security number, etc.) that would make it easier to solve. Thank youAlso, either by the way, if this is in the wrong forum topic, please let me know.If you use a wireless keyboard or mouse to your computer, these items can keep your computer enter standby mode automatically because they constantly send a signal to the system, thus preventing downtime. An optical mouse (that changes color) causing a similar problem.
- 1
Click "Start," "Control Panel", "'material and his ' and 'Device Manager'."
- 2
Double-click "Network adapters", then right-click on your network device. Click 'properties '.
- Analysis software of CAN
Economic and powerful CAN bus analysis and diagnostic software.
- Analysis software of CAN
- 1
- 3
Click on the "Advanced" tab and scroll down the list of 'Property' to find all entries beginning with "Wake up" or "Wake up" in the entry. Click once on these entries and in the drop down box at the top right make sure it says 'None' or 'off '.
- 4
Click the "Power Management" tab at the top and make sure that the "allow this device to wake up the computer"is not checked. " Click on 'OK '.
- 5
Open Device Manager, as above, and then double-click "Mouse" or 'mice and other pointing devices' right click of your mouse, and click 'properties '.
- 6
Click the "Power management" tab and make sure that the "allow this device to wake the computer" is disabled.
-
When I open Firefox on my home page, there is an empty space in the middle of the screen. No script; just a bar click on and an empty box and a (?). Nothing works and to get out of the Firefox screen, I have to close it with the Task Manager. I can open in a new window and the box is not - that's what I use now. Can I have a virus? Any help will be appreciated. Thank you. Carol
AOL toolbar extension has been reported because of this problem with an empty window that appears at startup.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.
- Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
- Do NOT click on the reset button on the startup window Mode safe
-
Can someone help me please?
On one of our macbook pro: end of 2011 in stock... hard drive, memory stock, after the 10.11.5 update nothing works anymore:
-Start: sometimes goes to 70%, 80% of the progress then a few lines appear and the screen goes black for a second and then turns to white to stay like that forever.
-recovery of the internet: charge of recovery, then starts and goes back to the white screen.
-time machine backup works do not at all
-Resettlement of USB-stick: boot from USB key gives the same result as the normal start-up (see above)
-everything: fashion, single user: same thing
(Internet) Apple hardware test allowed the machine.
Thing I could try?
Target works of fashion, I copied most of the files on the external drive.
If nothing else works, can I do a clean install to this macbookpro (in target mode) of mine?
Thank you very much.
can I do a clean install to this macbookpro (in target mode) of mine?
Yes. Open utility disk on your computer. Run disk utility, select the drive from the computer problem and select first aid. Reformat the hard disk using Disk Utility/Erase Mac OS extended (journaled), then click on the Option button and select GUID. Download the installer from the App Store using the identifier Apple associated with the computer that you are trying to recover. Then re-install the operating system on the computer of the problem.
-
Some characters do not work on the keyboard.
WHEN I CLICK ON THE QUESTION MARK OR EXCLAMATION MARK, SLASH, THESE KEYS DO NOT WORK ANY LONGER AND TYPE ANY OTHER DIFFERENT KEYS AS AN OBLIQUE BAR
Original title: my keyboard is not configured, does not recognize not the question mark etc.
Hi MonicaLopez Laurie,
Thanks for posting your query in the Microsoft Community. It seems that you have a problem with the keys on the keyboard does not. We can get this fixed number by systematically. It can be frustrating for you. But, don't worry, we're here to help.
We start with a few questions-
(1) what is the brand and model of the keyboard?
(2) does the keyboard work on another computer?
(3) how exactly the keyboard is connected to the computer?
(4) have you made changes on the computer before the show?
I would like more information about the issue.
Method 1-
I wish that you are running the fixit-
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/
Method 2-
I would have you look at the article-
Troubleshoot wired keyboards that do not or only the erroneous characters category
http://support.Microsoft.com/kb/258826#top
Method 3-
I would have you look at the article-
Mouse, touchpad and keyboard with Windows problems
http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows
We know if you need help. We will be happy to help you.
Thank you.
-
I changed the batteries in the keyboard. Mouse works but the keyboard does not work.
I changed the batteries in the keyboard (wireless laser 4000 desktop computer), the mouse works fine but cannot type on the keyboard. Any ideas? Thank you
Hello
I suggest you to follow the steps in this link and check if it helps:
http://support.Microsoft.com/kb/838398
It will be useful.
-
some keys are not working on the keyboard.
Original title:
Keyboard problem?
Hello
I got a laptop HP with windows 7, I removed the hardrive and put it directly into another laptop. All except 3 or 4 keys on the most recent work. I think it's because they are different models, how can I reset the settings or drivers for the keyboard?
Thank you!
Hello Castingman,
Please keep us updated on the status of the issue.
However, before I would need some information to help you best.
1. What is the brand and model of the keyboard?
2. the problem occurs with another keyboard?
I suggest you try the following methods:
Method 1:
Try to use this keyboard on another computer and see if the problem exists. This will help determine if the problem is the keyboard or computer.
If the problem disappears with another keyboard and occurs on the other computer with the keyboard, so the keyboard is defective and must be replaced. If the new keyboard also has the same problem, then it's probably something with the computer and not the keyboard.
Method 2:
Log on to the computer manufacturer website and update the latest chipset drivers and other updates to the device driver.
Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.
Thank you
-
Cannot get the backslash to work on the keyboard - HP Pavilion dm3
Hello
For some reason, I can't get the backslash key to work on my keyboard. Whenever I try to use a backslash I get the following symbols
-that if I simply hit they key #.
-or maybe this if I use shift ~.
The hash symbol is actually located above the number three on the keyboard, when I get over that I have £
I am at a loss as to why my keys are everywhere!
Someone at - he had ideas because it drives me crazy!
Thank you
Hello
This is generally what is the problem. This is the bad loading keyboard mapping. I have the same hassle from time to time between the English) and Dutch languages that are installed in my BONES.
Try adding American English (International) to the language bar.
Best regards
ERICO -
Favorite keys only work when the keyboard and Microsoft mouse is running.
Original title: ergonomic keyboard 4000 my favorite
5 favorite keys work if I loaded the program "Microsoft keyboard and mouse center", it takes a few minutes to load, if I put my computer to load at startup it will delay the computer for about 15 minutes, so I don't do that. But often forget and then when I press one of the keys to load the word, it doesn't happen, is this normal or am I missing something important? all other keys work OK.
Hi Sally,
1. what version of Windows operating system do you use?
2 did you do any hardware changes or software on the computer before the show?
I suggest you try the steps from the following link:
Troubleshoot the incidents of the response to the mouse or wireless keyboard
http://support.Microsoft.com/kb/838398
Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.
-
Im having a problem with first where when I drag the handles on a clip in the preview, it shows you gets stuck for like 5 to 30 seconds.
anywhere in the clip and any scenario. only happens when the selection tool is dragging the end of the clip, inside or outside; even if no change is made; ERGO: pull the clip when its at its end to the end (basically changing nothing) the Preview on the program monitors stills lags the display showing the last image of the clip on the left and a black clip on the right
has anyone ever seen this problem. Have a fix?
Ive already tried:
The first update
importing a new project
a new opening sequence
... help?
work on a cc first pro 2015 with the last update
GTX 980
32 GB of ram
I7 haswell
SSD OF 850
project on business 4 TB WD
Windows 7 ultimate
Nothing remains open, but this one project that does. the fact for all cameras
A7S XAVC 50mbps 1080 60 p
FS700 AVCHD 25 1080 30 Mbps
Mark iii 30 1080 p IPB
Zoom Hn4 for sound
Under the key sequence, uncheck preview Composite during Trim.
(And it's actually monitor the program . The control panel is on the left).
-
the Lenovo g500 mouse does not work after the upgrade to windows 8.1
I recently upgraded my g500 windows 8 for winows to 8.1. But ever since then, my mouse does not work and the keyboard works only after standby. I tried to restore the default settings, but that didn't help. What can I do to fix this?
Hello
If the system is still under warranty,
I suggest that to call a repairman,
If this isn't the case, you can try to check the keyboard and the Touchpad connection.
You can consult this service manual
http://download.Lenovo.com/consumer/mobiles_pub/lenovo_g400g500g405g505g410g510_hmm.PDF
Hope this helps
See you soon!
-
Good work of the fn in Satellite L30.
Sorry for the inconvenience. I have the Satellite L30. A month ago the fn began to malfunction. ("Upside down").
Codes 'Fn' (the blue keyboard color) of all key works when you press the Fn key does not work. But the correct values of the key works only when the Fn key is pressed.
It's very uncomfortable - to press Fn and other simultaneouosly key.
Could someone help?Very strange problem. If all goes well there s nothing wrong with the keyboard itself.
As Abe has recommended, you should first try to reinstall the hotkey utility.Also, download the freeware utility called CCleaner. It repairs your system files and the registry. Maybe it helps
Mouse
Maybe you are looking for
-
How can I determine the configuration of TLS/SSL in Firefox ver 38?
I received the following message (partially shown) when I tried to connect to a particular Web site. The secure connection failedAn error occurred during a connection to xxxxxx.xxx. Cannot communicate securely with counterpart: no common encryption a
-
Context of sequence of LabVIEW user interface access
I'm trying to find a way convey the context of the sequence into LabVIEW Advanced User Interface. I need to check the values of some globals to the station before opening a movie file. I was looking for a way to send a UImessage to frontendcallbacks.
-
Layers PCB changing on MultiSim annotate with impatience to Ultiboard
I'm under Ultiboard and MultiSim Power Pro v 10.1.1 (10.1.372) I have this definition of the Ultiboard copper layer: and the Toolbox of design in Ultiboard is: I have 4 layers defined in MultiSim, but is the only option for a tray of 4 layers: Top, I
-
How to sync Outlook emails in Windows Live Mail?
How to synchronize Outlook e-mail with Windows Live Mail so that writes on Live Mail outgoing messages are sent?
-
Hello, my name is Rizal Faisal Akbar, but call me LASI. I'm from the Indonesia. I want to ask questions about the application of BBM surveys. Today at 18:00 (the Indonesia time) I heard from my friend that BBM was missing in Windows store. And after,