Laptop HP pavilion 15-e015tx: error after recovery

Similar Questions

• Bought 5 sets of laptop HP Pavilion G4. I can create recovery disc 1 game...

  Just bought 5 sets of laptop HP Pavilion G4. Can I create 1 1 of the laptop recovery disk and use it for all?

  Also or I can clone the recovery partition in a laptop and use it to others.

  Please advice.

  Hello

  As long as all laptops have the same recovery Nr discs created on a machines work on others (although it may be wise to create 2 games just to guard against a disc is lost etc).

  Kind regards

  DP - K

• Laptop HP Pavilion g7 - black screen after login

  Hello, last night, I tried to understand why my Trend Micro antivirus was not updated itself, as I walked through Trend Micro troubleshooting options. I did a scan of firewall and restarted my computer later. When I restarted the computer, the adapter is out and shut down the computer while it was restarted. When I plugged it back in and press the power button, it took me for my normal login page. I signed up and the screen was black. I tried to push the windows, ESC, f1/f2 button and manually shut down the computer when no one who worked. I have tried several times and it is always black. The only thing that works is when I press ctrl, alt, del. I see my task manager, but nothing else. My CPU and disk % will be all over the map! with memory, never change the network never change to 0% and 14%. Is there something I can do?

  It's a laptop HP Pavilion g7
  I have Windows 8

  Help me Support HP team, you're my only hope!

  Hello

  Were there any other restore points listed for a date earlier than that you just tried?  If so, you might want to try the procedure again, ideally (if available) pick a restore point that is approximately 3 weeks.

  Kind regards

  DP - K

• Error after recovery

  A few days ago my laptop was not well run. I did a hard reset - remove all and reinstall windows using HP Support Assistant. He did but when laptop reboot, install a windows message showed:

  "The computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and then restart the installation. »

  So I press on enter several times but it was edited by moderator this message. Please help me soon. The deadline for assignment will be available soon. I have no time to lose. I use HP Pavilion Sleekbook 14-b013nr. Thank you.

  "Thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove the use of the language.
  
  Thank you
  George

• Pavilion dv7-1110eo: HP Pavilion dv7-1110eo error after update BIOS startup

  I've updated the BIOS (it is now Hewlett-Packard F.49) with a download from the HP Web site. I wish I had not done that because it's my portable patient. When start it freezes and the only thing that I see is black screen with HP logo. No button works.

  Later I discovered that BIOS itself is not the problem (I tried to get back the old version for a long time without success), it is the connected USB devices or USB ports, don't know. My laptop starts normally and works perfectly if I remove all plug-ins USB until I press the power button. After the black screen is passed I can plug the USB and they work too. I wonder if any of you ever faced this kind of problem...! If you have and you know how to solve this problem, please help. (Finnish HP customer service couldn't help me).

  Here's a full report of the problem (my blog):

  http://10101101010110.livejournal.com/32291.html

  http://10101101010110.livejournal.com/33650.html

  http://10101101010110.livejournal.com/33872.html

  Hi @10101101010110,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion dv7-1110eo Entertainment Notebook and questions with a BIOS update. You can reset the BIOS with this document by selecting the reload the default BIOS settings. Helping other people.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system, including USB devices.

  I hope this helps.

  Thank you.

• Upgrade the RAM of the laptop HP Pavilion 15-e015tx

  I want to add a barrette of RAM more than 4 GB on my HP Pavilion e015tx-15 Notebook PC. I have the motherboard "Hewlett-Packard 1970 (U3E1).

  Only thing I fear is the MHZ of the RAM to be used. Please suggest me what my motherboard MHZ takes in charge.

  Dexter.

  Add the same speed else your stick of ram.

  Your manual here.

  http://h10032.www1.HP.com/CTG/manual/c03939658.PDF

  Page 26 Chapter 3.

  REO

• Satellite A205: New HDD - error after recovery

  I replaced the hard drive in the Satellite A205 and used the Toshiba Recovery and disc drivers/Application to re - install the drivers and Windows Vista.

  However, when the recovery ends and the windows starts for the first time, I get a message: Windows Setup could not configure Windows to run on a hardware on this computer.

  The new hard drive is a Western Digital 500 GB SATA.
  Is there a conflict with the new hard drive?

  Anyone have any ideas?

  Thanks for any help.

  Hello

  It might be possible that there is a conflict with the new HARD drive.
  Try to start Windows Vista is SafeMode (F8-> safe mode)
  Is this possible?

  You can also try to repair the system.
  F8-> fix my computer

  Another question:
  Have you tried to install the system using Microsoft Windows disc clean?

• Pavilion Entertainment PC questions after recovery

  
  

  Hello

  The key you have to the laptop is for windows. The only other way to check is if you have received a sticker or a disk in case you don't have any, you must buy it again.

• Laptop HP pavilion 15-e015tx: Windows 10update

  Tell me I want to upgrade to 10 Windows in Windows 8, so MICROSOFT told me that I first ask my my eligibility of 10 then windows product manufacturing I can upgrade directly to Windows 10. Then, when I ask HP about my eligibility product Windows 10 so they say g as upgrade to 8.1 Windows to check the eligibility of product of Microsoft Windows 10 pop up.
  
  Then how can tell I check if my product is eligible for Windows 10 or not because I want to directly upgrade to Windows 10 of Windows 8

  Ayush110 wrote:
  But Microsoft told me that I can directly upgrade to Windows in Windows 8 10 by ISO file

  Hello

  Well, it's you. Please follow the instructions below:

  https://www.Microsoft.com/en-us/software-download/Windows10

  And please don't tell me to upgrade to 8.1 Windows

  Kind regards.

• HP Pavilion g7-1338dx: error in Partition Recovery Windows 7

  I have a laptop HP Pavilion g7-1338dx. I used recently to minimized Image Recovery on my PC for restore Windows 7 after I decided I liked Windows 7 better. The recovery went well, but recently something happened with my recovery partition. All of a sudden, he's really filled and won't start. HP Recovery Manager (C:\Program Files (x 86) \Hewlett-Packard\HP Recovery Manager\Rebecca.exe\) said that recovery of the system (under System Restore) is disabled. He never used to say that. When I decided to make sure that it worked properly, I get boot error code: 0xc0000225. Why would he do that? I don't have any DVD recovery.

  Thank you!

  -me15prg9926

  If you have not done your defined recovery disk you can order here:

  https://h10025.www1.HP.com/ewfrf/wc/mediaOrder?cc=us&LC=en&productOid=5263043&softwareitem=679942-001

• Laptop HP Pavilion g6 - Audio is no longer working after Windows 8.1 upgrade

  Hello

  Product name: HP Pavilion Notebook PC g6

  Operating system: Windows (just improved) 8.1

  Description: There is an audio problem. Sound does not work. Issues include:

  iTunes error message: iTunes has detected a problem in your audio configuration. Audio/video playback may not work correctly

  youTube questions: a video will play for 1 second and then display error message

  F9/F10/F11 keys do not change to the Audio settings

  When I click on the Sound button (which is currently muted), the Audio playback window opens indicating that troubleshooting couldn't identify the problem.

  This has happened only since I upgraded from Windows 8 for Windows 8.1 this week.

  The Audio and sound in the HP Support Assistant settings are:

  IDT High Definition Audio CODEC

  Status: (52). (52).

  Driver: stwrt64.sys

  Version: 6.10.6425.0

  AMD High Definition Audio Device

  Status: (52). (52).

  Driver: AtihdW86.sys

  Version: 8.0.0.8808

  Thanks for your help

  Phil

  Hello Pipster100,

  I want to help you get this audio problem solved with your PC laptop HP Pavilion g6. So I can better help you, please provide me with the number of model/product from your laptop.

  In addition, something you can try is to use Recovery Manager to restore the software and drivers. Once you open the HP Recovery Manager, install the audio driver that is listed under drivers.

  Forward to your response.

  Thank you

• Laptop HP Pavilion G6: after upgrade windows 10 - cannot detect wireless network

  Hello

  I upgraded my computer windows 10 laptop and it cannot detect a network.   The network adapters that appear in the Device Manager - controller Realtek PCI FE and Qualcomm-Atheros 802.11 AR9485 wifi adapter but I can't see any network.   I tried to install several drivers for Atheros without success.   I went back to windows 8.1 and network drivers works, I have upgraded to windows 10 back and I can't connect to wireless networks. I tried to update the drivers without success, uninstall and reinstall without success, I have alos tried the solution published on the microsoft unsuccessfully Web site: https://support.microsoft.com/en-us/kb/3084164

  I get an error message saying "the system was unable to find the key to register specified or the value '. '" I didn't install any software VPN or another, is there a solution to my problem?

  Hi there @tikaro23,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I understand that you have a problem with your Wi - Fi on the laptop HP Pavilion G6. You mentioned that you can't detect a wireless network.

  I did some research and found a great document for you called HP PC - troubleshooting wireless network and Internet.

  What happened with you have attempted to use the resolution of the problems mentioned in the link you so much?

  Have you tried to restore the BIOS?

  Have you tried to connect directly to the Modem/Router?

  Have you tried to boot mode safe?

  You can maneuver in Mode safe without problem?

  In my research, I also found a Support Forum on the page called Microsoft Community after upgrading Windows 8.1 for Windows 10, no wireless networks are available.

  There is a post of RajithR. Read his message in its entirety. (I also provided it below.)

  

  You said you tried to uninstall the driver. Are - what you got to do it in the order shown below?

  • Uninstall the driver of network card in Device Manager,
  • Reboot the laptop twice,
  • Reinstall the driver.

  Please use the HP Support Assistant, it will help with the software and drivers on your system at the time of purchase or this update of need.

  I know you said you tried to update the driver also. Have you tried to do it in the Device Manager in the order given below?

  • In the Device Manager
  • Click the network adapters to expand
  • Right-click on the network adapter family
  • Select software update of the driver
  • Choose search for automatically updating driver software.
  • Once the installation is complete, restart your laptop.

  Please follow the troubleshooting steps above and the re-post with the results, information from the above questions and HP Pavilion G6 Notebook PC model number.

  Thank you!

• Toshiba laptop start registry error after manual stop

  original title: Toshiba laptop start registry error after manual stop - HELP!

  Hello, I have a Toshiba laptop with Windows Vista.  Yesterday it froze completely upward and I had to manually close (hold the power button until stop you him) twice.  The second time when I tried to restart the came Toshiba screen, then the screen with the little scroll down bar, and then it went black, waited for a while, then flashes a bluescreen with a written up VERY quickly and cycles back to the Toshiba screen.  This time after the scroll bar it gives me white saying the writing system could not restart, and I want to start normally or startup repair. If I restart it through loading files, trying to fix it and said then he wasn't able to fix it and when I look at the details there something on a registry error.

  I really need to solve this problem quickly and desperately want to save all my files if possible because it's our main Mobile family that has all our digital photos on it and they are not saved. (I know, terrible of us).  Can someone help me?

  Thank you

  Charity

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Error System Recovery Options while trying to install Windows 7 on your laptop white (without os)

  I bought a Toshiba laptop satellite c55-c-174 with no OS on it. Downloaded Windows 7 from msdnaa and bootable usb drive created with PowerISO. Had a lot of trouble with the usb as a boot recognition, but then I changed the boot order to usb is just after the drive hard (i.e. second). Also in the configuration system changed boot at CSM Boot Mode. And it's system BIOS version 5.10.

  Finally, he started installation, but found no drivers. So I tried Startup Repair option. Didn't fix it, just at the point where I tried to access the repair your computer option again it says error System Recovery Options: this version of system recovery options is not compatible with the version of windows that you want to repair. Try to use a recovery disc that is compatible with this version of windows.

  Someone has the power to deal with this?

  Thanks in advance.

  ISO power not recommended to bootable media.  The prompt for drivers almost always means that the media is bad, because all modern SATA drivers are in the installation media.

  I create flash support using Rufus for UEFI/GPT, then start using only the Key of the BIOS Boot Menu.  Choose the UEFI version to the flash stick, then custom Setup, remove all partitions until the space unallocated click beside the AutoShape and start.

  If you have changed all the UEFI BIOS configuration settings, set them in the UEFI firstly, turn off Secure Boot, CSM disabled, Windows Boot Manager set first to start.  If, in case of doubt poster of photos of back and we will help you sort the parameters correctly.  It would be good also update the UEFI firmware like this can matter.

  All this is covered and much more still to ensure a perfect clean reinstall Windows 7

  For all other problems see resolve the failures of Installation Windows 7

• When I install Windows xp in a pc laptop hp pavilion 2018tx g4, see the error 0X0000007B? How to fix?

  Hello Sir,

  When I install Windows xp in laptop laptop hp pavilion g4-2018tx, an error show me 0X0000007B.then I am looking for the solution of the internet, someone tell me to try next step-go to the BIOS and disk configuration sata hard then go but unfortunately in my computer, there is no disk sata hard option.i want to install window xp.plz me not to say the procedure how to install Windows xp in laptop.

  Hello

  0x0000007b error code, could mean an inaccessible boot device or a host of other reasons why this error. In the interest of all the possibilities, see the link below for troubleshooting tips.

  http://support.Microsoft.com/kb/324103

  Good luck.