Laptop stops by itself (Windows Vista)

Similar Questions

• I was trying to read a sd card in my phone opera and it stop my computer windows vista laptop.

  Original title: windows vista compatibility?

  I was trying to read a sd card in my phone opera and it stop my computer windows vista laptop. Is their a capacity problem or am I missing something. I have long phone trying to upload photos to save. Have I missed a program?

  Hi Garym.nsb, fl,

  ·         Did you do changes on the computer before the show?

  ·         You receive an error message?

  Follow the suggestions below for a possible solution:

  Method 1: Try to use the SD card on another computer and see if you can access the files.

  Method 2: Performance Automatic troubleshooting of Microsoft.

  Microsoft has automatic convenience store to find and troubleshoot hardware problems. Try the following steps to run the fix it.

  Visit the site and download Microsoft fix and run it with the following success:

  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: Try to use an external card reader to see if it helps.

  Let us know if it helps.

• My Acer laptop stop by itself due to overheating, where can I get it checked/fixed?

  My Acer laptop stop by itself due to overheating, where can I get it checked/fixed?

  Because my laptop is already more than 3 years old (out of warranty), I opened it up with the repair guide.
  I am amazed at what I found: dust clusters as a foam - like substance that blocked the ventilation. I remove the dust and my laptop works fine now

• I want to improve my laptop Sony Viao from Windows Vista to Windows 7. Is this possible? What are my options?

  I want to improve my laptop Sony Viao from Windows vista to Windows 7. Is this possible? What are my options?

  You must run the windows Upgrade Advisor 7, but the machines compatible vista are also compatible Windows 7.  Your options are http://windows.microsoft.com/en-us/windows7/products/upgrade

• My administrator password stopped working on windows vista

  original title: administrator password

  My administrator password stopped working on windows vista... What can I do?

  Hi impathunt,

  See the article mentioned on the Microsoft Policy below we lost or forgotten the password.

  http://support.Microsoft.com/kb/189126

  For reference:

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows7/what-to-do-if-you-forget-your-Windows-password

  Keep secure passwords - Microsoft strategy on move the passwords

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd

  (Refer to the suggestion given by BillFill dated dated December 14, 2009)

• want to use my cam xbox on my laptop which is a windows vista

  I want to connect my xbox camera to my laptop which runs on windows vista. It works fine with my other computer which is windows XP... any help please?

  Hi Joezilla,

  If there is a XBOX Live Vision camera, please see the following information from the Vista Compatibility Center:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/details.aspx?type=hardware&p=Xbox%20360%20Live%20Vision&v=Microsoft&UID=&pf=0&PI=9&c=cameras%20%26%20Photo&SC=webcams&OS=32-bit

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• my windows Explorer has stop runing on windows vista, how can it be fixed

  my windows Explorer has stoped working cant use program that you use in windows. Impossible to update, delete. Unable to get something that you use in windows Explorer.

  Hello

  First use the last link in this troubleshooting, then use the other methods to try to resolve the problem.

  -----------------------------------------------------------------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• Microphone is not working after the decommissioning of laptop Sony Vaio from Windows Vista to Windows XP

  Original title: I recently switched from windows vista to XP on my computer laptop SONY Vaio VGN-NS110E my microphone does not work. Driver audio realtek has been downloaded and it does not work. Please notify.
  
  See above

  Hi AmandaMwaramba,
   
  -Which program you want to use your microphone with?

   

  We will try to test with XP built in tool. Please follow the steps below to do the same.

  a. click on 'Start' > select 'Control panel' > double-click "sounds and Audio devices".

  b. Select the "voice" tab > under default device which device do you see? > Click on "material Test".

   

  If you get no sound, change your default device that I mentioned above, the parameter may be wrong.

   

  For more information, see:

  To set up a microphone

• my laptop hp dv5 with windows vista home premium series starts do not

  my laptop hp dv5 series with windows vista home premium not starting not, despite several presses of the power button that only a white screen appeared only to nd 2-3 seconds then the system crashes.all started last night, when the electrical connection cut (no battery attached to the laptop). in the morning when I tried to start it, the led light of the charger pin on the beds for laptop for about 6-7 seconds nd then turns off. When I pressed the power button with the connected charger pin, it does not start, BUT when I joined the battery wid, the light (power) led to turn it on mobile to the top but the led on the pin of the charger turns off after a few seconds. SA is NOT SHOWING anything on the SCREEN EVEN AFTER PRESIN F11 etc please help

  Hello

  Power outages often lead to problems of material with computers / laptops.

  If there's nothing on the start screen (HP Logo, etc.) at startup, you may have a hardware problem.

  If under warranty contact HP.

  If this isn't the case, under services, contact a repair shop, local.

  See you soon.

• At the opening of the various programs I get the error message 'extended attributes are incompatible' and "Consent UI has stopped working" in windows vista.

  Original title: extended attributes

  I started getting the following errors with various programs "extended attributes are incompatible" and "Consent UI has stopped working". I tried to do a system restore but get error inconsistent attributes for 'rstrui.exe '. I also had the message to ShellExecuteEX.exe when you try to install an application and even trying to download the Windows 7 Upgrade advisor. Just to check, I tried to run msconfig from the start and even gives me the message attributes. I am running Vista Home Premium with Service Pack 2 installed. Advice please. Thank you, Roger P

  Hi Roger P.

  ·         When the issue started?

  ·         Remember to make any hardware or software comes to the computer before this problem?

  ·         What antivirus application is installed on your computer?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I suggest you to follow these steps and check if that helps.

  Methoad 2: try to run the windows recovery option system restore.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  It could be useful!

• SE error windows host process (Rundll32) has stopped working on Windows Vista

  Original title: (Rundll32)

  Need help fixing this problem microsoft windows popup message, process host windows (Rundll32) has stopped working.

  Hello

   
  1. When you get this error message?
  2. were there any changes (hardware or software) to the computer before the show?
  
  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.
  
  Step 1: safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.
   http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Step 2: To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts
  
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135
  
  Hope this information helps.

• How DO you restore the laptop computer screen under windows vista image

  Now, the picture on my acer laptop screen is totally black. Before that, I had my external monitor plug into laptop via mirror image and both monitors worked to find. My OS is Windows Vista Home premium. Help!

  Just a thought... it can be interesting to try to start safe mode
  and do a system restore to an hour before the start of this issue.

  * Proceed at your own risk *.

  See the following links:

  Windows Vista - start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Windows Vista - tools of diagnosis to use in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/diagnostic-tools-to-use-in-safe-mode

  Windows Vista - system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Good luck...

• Restored for laptop, need to activate Windows Vista product key on the laptop is unreadable

  My computer has been recently completely reset and now I need to activate windows vista again. In order to obtain a sustainable version of vista that I need a product key, however, the bottom of my laptop product key has some unreadable letters/numbers. What can I do about it?

  Hello

  I suggest that you contact the manufacturer of your computer and the recovery order discs form their

  need you normally not a product key to install

  ask them about it

• HIDData.exe has stopped working in Windows Vista SP2

  I am running Windows Vista w/SP2 on a Compaq CQ70 w/an Intel T3200 2.0 ghz processor. I recently installed a USB Bluetooth device. I get the error "HIDData.exe stopped working" reported before with a USB Bluetooth mouse. Every avenue, I used to try to find a solution show KB941600 cumulative update installation. However, when I started to install the update, I learned that it is applied to a different operating system than the one on my computer. I guess that's because it applies to Windows Vista without SP2 installed. Is there a way to solve this problem for the updated Vista version?

  Hi IXOYE4Us,

  This error may occur due to the old version of the HP Quick Launch Button software. If you have installed a HP Quick Launch toolbar, then you can try to disable the toolbar HP Quick launch at startup or uninstall it and check.

  You can try to perform a clean boot and try disabling the HP Quick launch at startup toolbar.

  For more information about execution of boot, you can consult the following link:

  http://support.Microsoft.com/kb/929135

  You can also view the following link to uninstall a program:

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Favorites synchronization of laptop Dell which uses Windows Vista for my HP Envy that uses Windows 8.1

  Somehow when I installed my HP Envy, I was able to get the Favorites of my Dell laptop which uses Windows Vista in Favorites on my desire that has Windows 8.1. Now, they are not there and I don't know how to recover. Tried the system restore, but no luck.

  Hello:

  If you are referring to the favorite links to Internet Explorer, it's what I do...

  Get a USB and navigate to your Vista username account and copy the Favorites folder on the flash drive.

  Plug the USB on your new PC W8.1, go in your user name folder and copy the Favorites folder in this window and let it overwrite the existing Favorites folder, as you see here.

  After the Vista Favorites folder replaces the empty Favorites W8.1 folder, you should be all set when you open Internet Explorer on your new PC.