Laptop turns on in the bag... I think that updating Windows?
I just had the unpleasant surprise of out my laptop bag after 2 hours and it was still running! It was hot to the touch and with gratitude, it seems to work very well. But it's the third time, it's happened since I bought it in January and it is quite relative. I put the computer to sleep and most of the time that he died, but I think that when windows tries to install the updates, it will not really sleep. So, I'm in the following with a hot laptop location. I really don't want to damage this machine, if any suggestions how I can make sure it is really wrong to sleep when I said to, Windows Update or not, would be great.
Thank you!
Windows should install no updates while you sleep on the battery, but I would check your settings to ensure that it was still defined in this way.
If you need to know, you can find what's causing your computer to wake up. Just do this:
- Click the Start button, select Prompt Admin.
- Type powercfg /lastwake and he will tell you what program or device caused the alarm.
Tags: Windows
Similar Questions
-
The screen of my laptop turns off when the power cable is connected. If this isn't the case, connected screen is ok. No idea why?
Original title: clear the display
Click Start or press the Windows key and type power can locate the power to change recording settings in the section of the Control Panel from the list above and click on it. At the opening of the Power Options pane, click choose when turn off display available on the left side.
Choose a new setting for brightness in the drop down menu on the battery . Look at all the other parameters that you feel you want to modify, and then click save changes in the lower right to apply the options you have selected energy saving.
You can now close the Power Options pane when you return.
-
If I'm going to activate a campaign and then turn it off, the segment will be get updated?
Hey,.
If the segments are updated every hour until the campaign is disabled.
Thank you
-
I had a note at the bottom right, saying that my Windows 7 was not authentic.
Corner of Windows 7
I got a note on the bottom right saying that my Windows 7 was not genuine... what he speaks and should I worry.
Here's what you asked for.
The Windows tab:
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Code of Validation caching online: 0x0
Windows product key: *-* - 73CQT - WMF7J-3Q6C9
Windows product key hash: RmurcM3ZxzWyfEP9WtPUJw = + KaFG
Windows product ID: 00359-OEM-8992687-00010
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010300.1.0.003
ID: {3754BDE1-7941-4E28-9FD6-78E99D9E9B3C} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Home Premium
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.120503 - 2030
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{3754BDE1-7941-4E28-9FD6-78E99D9E9B3C} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 64 *-*-*-*-3Q6C9 00359-OEM-8992687-00010 2 S-1-5-21-1573336260-1148118520-3100803624 Hewlett-Packard p6604f American Megatrends Inc.. 6.02 20100721000000.000000 + 000C6F73307018400F4 1009 0409 Central Standard Time(GMT-06:00) 0 3 HPQOEM SLIC-CPC 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium edition
Description: operating system Windows - Windows (r) 7, channel OEM_SLP
Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00359-00178-926-800010-02-1033-7600.0000-2052009
Installation ID: 011014254221589280652336857063574575147061894094927390
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 3Q6C9
License status: licensed
Remaining Windows rearm count: 3
Trust time: 31/07/2012 21:07:13Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
Beyond: 0 x 0000000000000000
Event timestamp: 7:31:2012 06:14
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current Hash HWID: KgAAAAEAAQABAAEAAAABAAAAAQABAAEAonaCsi7gIJEo + FTIAqiWPhh5Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0 x 20001
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
HPQOEM APIC-SLIC-CPC
FACP SLIC-CPC HPQOEM
SRAT HPQOEM SLIC-CPC
HPET SLIC-CPC HPQOEM
MCFG SLIC-CPC HPQOEM
SLIC SLIC-CPC HPQOEM
LASRYVITRAGE HPQOEM SLIC-CPC
SSDT HPQOEM SLIC-CPC
SSDT HPQOEM SLIC-CPCWhen I check the properties of my computer, it says
Windows is activated and gives a product ID.Not sure why I would have gotten that message.
Thanks for any help.I don't see any problem in your report. It shows that activated and validated.
The notice showed that when you ran the report? -
Laptop turn on but the screen is completely black
Hi guys,.
I was wondering if someone have an idea as to why my laptop (which was working perfectly last night), now has a black screen when I try to turn it on.
I read in some other forums who offered to take out the battery and hold the power button, but that didn't work...Remedies?
Thank you.
Jess.Hi Jess
Is a busy HARD disk when you start your laptop?
You hear Windows sound?If possible try to connect your laptop to the external screen or a TV to see if you can see anything on an external device.
-
laptop not having not the portable printer after that computer settings has been turned off
I have a problem with my laptop and my printer after I connect to the WIFI printer. It will work if it was attached to the printer, but as soon as I turn it off the setting have disappeared. My laptop works on WP7 and canon mg5200 printer. can someone help me.
Hi Phil,
Have you installed new software or hardware before the show?
It seems that printer drivers could be exceeded and must be repaired or updated. We will analyze and identify the cause of the problem.
You can run the printer Troubleshooter and update the drivers of the material provided.
I could not locate the exact model number you have provided. If we're not the printer model number, you can choose one that fits in the list. If the printer model number is the same and that you did not find the driver, then we will have to install the driver of a similar model.
You can see this article from Canon.
If the problem persists, you may need to contact Canon support for more information.
Hope this information helps. Response with status so that we can help you.
-
Computer user connection laptop turns off when the lid is closed
How can I configure my laptop to disconnect the current user (switch not only users) and force them to close all programs when the lid is closed, and then switch to sleep mode?
There is no direct option for this, but you can create a batch file that has orders for logoff, then the command for the night and have that run the trigger of "Lock Workstation".
Task Scheduler allows many triggers. Type Task Scheduler in your Start menu, and then click New task on the right side to explore your options. -
Computer turns Off at the start and can not reinstall windows
Hello, I'm Paul and I * generally * use my mac. At the point where I need my Windows laptop, I can't use! I recently had Windows reinstalled, and after some time, he asked to * automatically install a driver *. Well, which brought an end to the life of my computer. It was the 12' th reinstalling windows. now when it starts, it just turns off. I tried to insert my CD of Windows Vista, but guess what? It says "Windows loading files...". ", and then it shows this screen of Microsoft Corporation loading with the bar and the bars green bit into it. After a little while ago, my computer just turned off! How the _ am I supposed to reinstall Windows (well, actually, install Ubuntu ^. ^) now? I tried it, but:------all else fails.
Please HELP, it's so sad. I will not buy another Windows computer.
~ Paul Côté
For any problem with reinstall Vista from recovery of the manufacturer support, contact the manufacturer of your laptop.
This isn't their recovery process, Microsoft
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To reinstall from a Microsoft Vista DVD:
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu
http://support.Microsoft.com/default.aspx/KB/918884
MS advice on the conduct of clean install.
http://www.theeldergeekvista.com/vista_clean_installation.htm
A tutorial on the use of a clean install
http://www.winsupersite.com/showcase/winvista_install_03.asp
Super Guide Windows Vista Installation
After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To install Ubuntu:
See you soon.
Mick Murphy - Microsoft partner
-
I lost my serial number for my copy of adobe photoshop elements 13. I was a fool and I threw away the box and the cd case, thinking I wouldn't need never the number. Is it possible that I can retrieve my serial number or maybe get a new?
If you have registered the software when you installed it first, then you might find the serial number in your Adobe account online.
-
I am using Microsoft Windows XP Professional, version 2002, Service Pack 3.
I recently reinstalled my operating system on my Dell Dimension 2400 PC and allowed for automatic updates. Previously I did not allow updates. I use very slow dial-up on a BCM 56 k
Voice/Fax/Modem. My previous connection was about 26 Kbps.
During updates of Windows XP, Microsoft notified me of the update following software:
(Broadcom Corporation - Modems - BCM. v92 56 k Modem, size: 2.8 MB, Broadcom Corporation modem software update published on August 27, 2003.) only the Microsoft Update downloaded and installed on my PC.
After the installation of update BCM, my modem went much more quickly in about 40 Kbps, however, I lost the Unimodem half-duplex audio driver configuration.
After the automatic BCM update, my modem sounds is the audio connection as he had done before.
I checked and the following driver files still exist where they belong: [C:\Windows\system32\drivers\ks.sys; C:\Windows\system32\DRIVERS\MODEMCSA.sys; C:\Windows\system32\ksproxy.AX; C:\Windows\system32\kuser.dll], however registration is missing in browser, under 'Sound, video and game controllers' Device Manager where it was previously before the upgrade.
How can I reinstall my audio Unimodem half duplex driver without roll back my BCM upgrade?
My audio driver is not my problem. The speaker still works in my Modem when I have dial-up. Otherwise, the rest of my sound works fine, so I don't think I need an audio driver. What's missing on my upgrade was my driver for unimodem half duplex, and everything remained the same after the upgrade.
Here's what's happening. Often, I reinstall my OS together by formatting my hard drive. After the initial installation and install the drivers for Dell provided, my modem works fine, but at a slower speed. When I switched I hear the dial through my external speakers, which I prefer because I have restriction of hearing Audio and can hear it better amplified by the modem speaker.
When I install the update to windows BCM, it accelerates the rate of transfer of my modem, I like, but it removes my driver audio unimodem half duplex, which means I can hear is no longer my dial-up connection to know everything is going well. The sound comes directly to my modem card, however, due to the location under my desk, my PC I can barely hear the connection is established and can not use this sound for diagnostic purposes if I can't connect. It allows to hear the connection to remind me in case the line is disconnected or the phone company disconnects and provides their voicemail automated on how to restore our service.
I just want to still hear my modem amplified through my external speakers without losing speed BPS who provided me the upgrade.
Not yet tried to use the dell service tag for Dell drivers. Don't know how to specify this tag, or if it would provide other drivers that I already downloaded, but will check the next.
In the meantime if anyone has a useful answer as to how I can get my external returning without sacrificing my BPS speed increase, I would like to hear it.
Thanks for all the answers everyone, even if for the time being not useful yet.
I don't think that it is half-duplex driver Unimode (even if I'm wrong). My XP3 box has a Unimodem full-duplex audio driver "" list in the device under ' Audio, video and game controllers' Manager, and I've never had the modem sounds come through the main speakers. [The difference between "half-duplex" and "full-duplex" is if you wait until a part expresses before the start of the other or if both parties can talk at the same time.]
Rather, apparently some - but far from everything - modem drivers have a checkbox somewhere in the modem properties dialog box (accessed through Device Manager or control panel > modems Options and) who runs the sound of the system's external speakers.
While you're in the control panel > phone and Modem Options, click on the "Advanced" tab and check the Unimodem 5 Service provider is installed. It must have been installed by default, but if not, you might want to add (using the 'Add' button).
I suspect that your previous modem driver - which limited the speed of your connection - had the external speaker box, but that the new driver - who has more speed - connect does not work.
It is probably not very satisfactory, but you can increase the volume of the tiny speaker of the modem (a little) by using the "Additional initialization commands" box in the "Advanced tab" in the modem properties dialog box. There are two relevant orders, the order of M (which determines when the speaker is on) and the command L (which sets the volume of the speaker):
M0 speaker always off [that's a zero]
M1 Speaker is activated when the modem is off the hook and the carrier is not detected. [default]
M2 The speaker is always on.
M3 Speaker is activated after dialing the ends and turns off when the carrier negotiation is complete.L0 low volume
L1 low volume
L2 medium volume
High volume of L3Orders are entered, preceded by "AT" (without the quotes) in the box "Additional initialization commands", and there is no spaces. Thus, for example, if you want to hear the sounds, most at very high volume (which unfortunately is usually not very high), you define L3 and M3 by entering the following text in the box:
ATL3M3
With regard to the number of Dell's Service: on the page linked in my previous post, there is a link "enter serial number". If you click on this link there is a box to enter your Dell service tag (and yet another link to tell you how to find if you don't know where it is). Dell uses the "service tag" to identify your specific computer hardware configuration, because the same model Dell (e.g., Dimension 2400) can come with a variety of different hardware options. Using the service tag is supposed to customize the material presented to you so that it is applicable to your computer.
Sorry I couldn't give you a better answer on your modem sounds.
-
I'm running Vista 64 on a laptop HP Touchsmart. I've recently updated to SP2. It took me 3 tries to get to SP2. I had there problems were as a result of security, Macafee, who had to be disabled to update, I discovered. Now, Windows Update will install the updates but it reflects not in the update history. It shows then available updates again and when I try to install the second time, they do not. Failure is displayed in the update history. I discovered I can manually download and install updates and they do not show as much success in the history of the update and the updates that Windows Update detects were removed. I completely disabled Macafee but did not help. Any suggestions?
I'm running Vista 64 on a laptop HP Touchsmart. I've recently updated to SP2. It took me 3 tries to get to SP2. I had there problems were as a result of security, Macafee, who had to be disabled to update, I discovered. Now, Windows Update will install the updates but it reflects not in the update history. It shows then available updates again and when I try to install the second time, they do not. Failure is displayed in the update history. I discovered I can manually download and install updates and they do not show as much success in the history of the update and the updates that Windows Update detects were removed. I completely disabled Macafee but did not help. Any suggestions?
Suggest you clean boot Vista x 64 . Perform step 1 .
Once in the clean boot state, run the Fixit here in clicking on the Internet Explorer shortcut and choosing "Run as Administrator" . Enter a password, if one is used, or click on the button continue. :
How to reset the Windows Update components?Then click the Fixit button, click run in the file download dialog box, and follow the steps described in the fix it Wizard. and choose the default option. Restart the system after the tool runs and check if updates are available, and if they install automatically.
Since it's Patch Tuesday, updates should be available for the system soon, if not today.
IF no updates installed automatically in the coming days, rerun the Fixit but aggressive use.
Don't forget to Cancel the clean boot once you have completed the steps running the Fixit.Please be patient. If you want to see if updates are available but are regulated, check WindowsUpdate.log: How to read the Windowsupdate.log file
Scroll down for the latest entries. IF updates are regulated, you will see an entry or entries that are similar to this:2009-08-17 07:36:45:739 980 370 DnldMgr rules: {9482F4B4-E343-43B6-B170-9A65BC822C77}-DAA5C9BF-D188-40FE-AF01-DFC72D5D422A update is the 'priority' regulated and can NOT download. The sequence 5472 vs AcceptRate 0. MowGreen MVP Data Center Management - update of safety Consumer Services
-
I think that my Windows Live Hotmail account has been compromised by a third party.
I think that my hotmail account has been compromised by a third party. Please help restore my access that I use every day. Thank you. * E-mail address is removed from the privacy * My home phone is 406-857-2362 call at any time. I can't work without e-mail.
original title: cannot open hotmail accountHotmail support:
http://windowslivehelp.com/product.aspx?ProductID=1>
Compromised account - unauthorized account access:
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41>
The service status
https://status.live.com/detail/Hotmail>
UTC/GMT is 10:56 Wednesday, February 15, 2012
-
I'm running Windows7 and have attempted to download/install Windows 10. The Windows 10 download/install fails with error code 80200053. Troubleshooting Windows Update product unresolved error code 80070057. How should I proceed?
OT:
Installation of Windows 10
I think that this error has something to do with the Windows updates blocking antivirus.
Try this:
(1) disable the anti-virus and all others no essential programs
(2) type in services.msc RUN which will take you to the 'services' and search for Windows Installer mine has been set to manual so leave it put there and just start it
(3) now, run windows update and wait for your window installed correctly
(4) restart the computer
Let me know how it goes!
-
Where can I get a disk of windows xp service pack 3 update windows? When I download updates for windows, Internet, I loose my internet connection. Thank you
Where can I get a disk of windows xp service pack 3 update windows? When I download updates for windows, Internet, I loose my internet connection.
During the download?
Ask someone else to download it and burn it to a CD for you if you really need to get SP3 and that your Internet connection will not allow it for one reason or another...
http://www.Microsoft.com/en-US/Download/details.aspx?ID=25129I have to ask - that's all you need? Is there a reason that 4 years after its release you download it? You perform a new installation recently? What service pack level is your current installation of Windows XP?
-
laptop turn off during the start of the disc
Hi, please could someone shed some light on why my laptop starts to boot from the drive (xp home).
loading files, but just before initial restart.it turns off, but turns off resarts once again the button, loading files, then just before the reboot,
h/d new mounted, good used ram 1 g, connected to the a/c
any suggestions... Thank you. Delmotte.
Could mean that the CPU fan is going or if you have any non essential attached devices it might interfere with installation. I suggest that you run the diagnostic test on the module of memory just to ensure he could not be the culprit: Memtest86 + http://www.memtest.org I had a similar problem with my Dell Latitude only to discover that it was the motherboard died. Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
Maybe you are looking for
-
HP Pavilion 15-n013ca: HP Pavilion - system will not ask for a user connection
Had a virus - malware. load malwarebytes and cleared. I was able to reboot and log in. I had too many running - Kaspersky, Mcafee and Windows virus protection systems. Kaspersky has expired, then started the uninstall, frozen system. I had to do
-
I can't turn on the WiFi, can someone send me firmware module or XPRT wi - fi?
When I turn the wi - fi, it became the 'error' message in the phone. I tried several times to factory reset, but it was the same result. I'm in the Japan, so I don't have to consult the shop in this country. The system of this phone version: version.
-
Save mail to the server, not computer
In Mac Mail, is it possible to save my mail (Inbox, sent mail, etc.) on the server ONLY and don't have it download on my computer? I have a few different accounts from different providers (such as hotmail) and here the messages remain on the server o
-
I have an excel template that I created. I open this model, save it under a different name and then writing and saving data to a sheet excellent at regular intervals. It gives me an error 5, I understand what it means and I'm working around him. How
-
DeskJet 3420: deskjet 3420 other driver installed, but the printer is still not printing
Hello everyone, I followed the instructions under the "alternative install print driver for Win 7 for USB. Once the Windows Update over the 3600 was not present, but the 9800 has been (I've read is also a generic driver). I can see the printer in my