Laptop Wireless for ps3?

Similar Questions

• HP Pavilion 15 laptop: Wireless Driver for my laptop HP Pavilion 17

  Hello

  I need to find the right driver wireless for my laptop HP Pavilion 15 (8 64-bit Windows).

  For network controller hardware ID:

  PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C & REV_01
  PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C
  PCI\VEN_14E4 & DEV_4365 & CC_028000
  PCI\VEN_14E4 & DEV_4365 & CC_0280

  Hardware for the PCI device ID

  PCI\VEN_10EC & DEV_5227 & SUBSYS_227E103C & REV_01
  PCI\VEN_10EC & DEV_5227 & SUBSYS_227E103C
  PCI\VEN_10EC & DEV_5227 & CC_FF0000
  PCI\VEN_10EC & DEV_5227 & CC_FF00

  For PCI Simple Communitcations controller hardware ID

  PCI\VEN_8086 & DEV_9C3A & SUBSYS_227E103C & REV_04
  PCI\VEN_8086 & DEV_9C3A & SUBSYS_227E103C
  PCI\VEN_8086 & DEV_9C3A & CC_078000
  PCI\VEN_8086 & DEV_9C3A & CC_0780

  All the foregoing is present in my other devices category in Device Manager, I don't know exactly who is responsible for the wireless.

  Any help in this regard is highly appreciated!

  Hello:

  You can try these drivers, but if they don't work, you need to connect via ethernet cable, do the updates required for W8 and then get the free update for the Windows store W8.1.

  Network controller:

  Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  FTP://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69737.exe

  PCI device:

  Download, unzip and run the setup.exe file from the link below... first driver listed.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 15 & PFid = 25 & Level = 4 & Conn = 3 & DownTypeID = 3 & getdown = false

  Simple controller PCI of Communitcations:

  This package provides the driver Intel Management Engine components for some laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67047.exe

• Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.

  Configure the router Cisco E2000 wireless for my laptop HP with Vista, I can't work.  I spoke with Cisco and they said that my Atheros AR5007 adapter does not work with Cisco E2000 and contact my computer vendor

  Hello

  HM... I guess that the Cisco people know what they're taking everything. The AR5005 is a b/g card and there should be a good reason to not work with a router that is able (the E2000 is able g) g.

  This is HP drivers for the card, http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-55737-1

  If you can't make it work, you must decide between a new card or another router.

  Personally, if it's new and I could return it, I'd get a different router model. But YMMV

  ------------

  My posts reflect my understanding and experience. It does not necessarily reflect the opinion or the vision of Microsoft, or anyone else.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Dell Inspiron 1545: Can not scan wireless for my laptop

  I have a Dell Laptop Inspiron 1545 it is my main computer. I also have a Dell Dimension 4600 series desk top that I use very rarely. My HP printer D110 all-in-one is set up for these two. My problem is that I can't scan to the Dell Inspiron 1545 laptop wireless to the printer. When I try the following message appears on the printer screen: try to may computer or see the documentation press OK.

  The last time I used the top of desk, which was a year ago, I was able to scan to it from the printer. However, I think that the printer and the computer are connected, but am not certain. I am able to print wireless from the Dell Inspiron 1545 to the printer without any problems.

  I have DSL.

  Any help is very appreciated.

  Thank you

  Hi @BlackSheepFan,

  From your description, I think it would be better to remove the software, clean up a bit of the computer, and then reinstall the software. Please complete all of the steps below in the order and let me know the results.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• How to find my WPA/WPA2 key for PS3 wireless connection?

  My needs for PS3 the WPA/WPA2-keys is my network PC or router.  Everything I tried failed.  I fear that my own PC network is assigned a new WPA key to my router and I can't find that key.  Is there a universal key by default?   Is this something I can unknowingly put in place myself?  Wouldn't be easier to just start a new home network and assign new keys?  Help, please!

  You will need to connect to your router and see if the security key is available for consultation.

  If this is not the case, as you say, it would be easier to reset the router to factory settings and start over.

  We cannot help you find missing security keys:

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

  Read theBANNING of cracking of passwords information tools information provided in these forums in the thread above posted byBill fill MSFT, moderator

  See you soon.

  Mick Murphy - Microsoft partner

• Magic of the network hit all the computers off line when the laptop wireless on signs

  I have Network Magic V. 5.1.9055.0, a G from Linksys WRT110 wireless router. Online at any time may be all or part of the next list computers/gamers, computer hand Win XP sp3 is connected to the router, Samsung clp300 printer lazer connected to the main computer as a server, Vista sp2 office connected to the Wii, PS3 wireless wireless router and laptop Vista sp2 wireless. Whenever the laptop wireless comes online, it will stop magic network until the wireless is fully initialized and online, it strikes all onlines offline until there is a full boot of the wireless.

  Very frustrating since we went all the cisco and spilled a belkin router that worked perfectly with the above configuration. (unfortunately I gave the belkin far and no longer have access to it or I would have released this new linksys and would be happy to once again) I don't understand why cisco units cannot work together in harmony?  In any case, I can't find any info on the help of linksys or the magical sites network which brings me to this forum. Need help, please notify...

  I removed NM v5.1.9055 three computers and re-installed to v 5.5.9118. inserted my key and re started to each of them. When the laptop wireless started it off the other two for about 3 minutes until the phone was fully charged while we were back on the line. The poster always online in the map view, the internet router is and the laptop (Vista) shows online, but the report to other computers (1 XP and 1 Vista) shows red and offline. Always frustrating because it's all working without error until I installed the linksys cisco router then the trouble started... still need help...

• Question regarding the purchase of laptop wireless

  Everything I've ever owned have been HP desktop computers. I need (well Yes, not desire) to buy a new laptop wireless. My intention to buy staples as I experience such great service in the past. Here are my questions:

  1 at the present time, I have high speed internet, but not wireless. Can I have both wireless and material "no wireless" goes on the same connection?

  2 will I be able to print on my existing (from my wireless laptop) printer if my desktop computer and printer are 'wired '?

  3. when I get out of the store, what do I need in my hands? I live 50 miles away and don't want to go home and find out that I'm missing something.

  I teach online classes will therefore could go 'on-line' no matter where I'm travelling. I guess my wireless connection works in the House of my daughter in Arizona as far as I know their password? As I have not worked with wireless, I am a little confused how it will work.

  I'd appreciate recommendations on routers and laptop computers, if you have a preference. I'll use camtasia in my class so will need microphone and camera possible.

  In advance thanks.

  Padraig

  1. Yes. This is called a hybrid network. With a wireless router that comes with LAN ports (4) which is easy to do. I use a Netgear WNR834B 802.11n router that has a LAN port. Easy to set up.

  (2) you will need to set up a simple home network and share the printer on the network from thePC to which it is connected. You can also install a print server connected to your network and it will have its own network address and be available for all the PCs on your network.

  (3) you need a wireless router (my preference is Netgear 802.11n because of the reliability, range and throughput of 300 kbs).

  I have exxplained the answers to your questions only in simple terms. I have no idea what your level of knowledge is in terms of networking (i.e. the subnets)

  My home network is a cable modem which is connected to netgear powerline devices (2)

  (via a CAT5 cable) which uses the wiring domestic (115 v) to provide an internet connection to my wireless router that offers a wireless for my laptop and a second office. My server at home and the box of FreeNAS are connected to the network via the router's LAN ports using a CAT5 cable

  .

• Need driver Wireless for Satellite L505 - 10 h

  Can someone help me find driver wireless for L505 - 10 h of Pentecost and tell me how to install it.
  And how to find my adapter wireless via my mobile phone?

  Thank you.

  Hi mate

  The laptop seems to bear card Realtek RTL8191SE Wlan.
  You can find the drivers here:
  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  For that you first download the driver package, then uncompress the package install.
  Exe file must be available in the driver package. Run this exe file and installation should products.

  Good luck

• Control of the Xbox 360 Wireless for Windows does not work with COD WAW

  Hello, I use the X box for windows pc controller. I have Windows Vista 64 bit installed, and I am trying to play Call of Duty World at War; However in the gameplay, the game does not respond to any controller input. Where this happens, it is indeed the controller wireless for windows with the wireless adapter and yes I checked for the last update and I.
  O.S Windows Vista, 8 GB of Ram, Intel Cor 2 extreme quad, HP laptop

  Hello dtorres17.

  Unfortunately, Call of Duty World at War doesn't support any input other than a mouse and a keyboard controller. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• I can't connect to the internet on this laptop wireless

  Hello. For some reason, I can't connect to the internet on this laptop wireless. I used to access through wireless, but recent I tried several times without success. I even leave do to set still no chance. I am pretty frustrated here, can you help please.

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://support.Microsoft.com/kb/870702

  It will be useful.

• WRT1900AC shows connected to the laptop wireless, but 'NO internet Connection' triangle

  recently replaced EA3500 Cisco that quit smoking with WRT1900AC

  configured for the wired network OK

  will connect WIFI for android Tablet

  DOES not connect to win 7 PC... worked fine with the old router (2 years)

  reset the WRT1900AC to factory settings... allowed 2.4 and 5 ghz...

  PC sees the wireless network and connects with password, still "NO internet connection".

  any ideas?

  Thank you waltinbatonrouge

  Thanks a lot for taking the time to suggest a fix... But the WRT1900AC went back to Best Buy yesterday. Easy back, by the way.

  Oh just a parenthesis... the WRT1900ac has finally connected ok Cat5. The speakeasy speedtest showed on 100-105Mbps of download, the same as the old EA3500 seized croasse.

  So, instead, I found an EA3500 used in a store of the local computer. Reset default and he already had the latest firmware.

  The old router Cisco EA3500 used the very simple "Cisco Conect" utility.

  Forums directed me to a version EA3500 of the "Linksys WiFi Smart" utility, which was a painless and immediately picked up the wireless for laptop Toshiba.

  He ran the same features on the speedtest and connected 'excellent' on room android...

  Have a great week!

• wired computer and laptop wireless work very well, but do not see the other

  What did I miss?  My laptop wireless on my WRT54GS Office 1.1 works 100% and my ethernet v connected to the same router also, but neither one sees the other, so I can't share anything.

  Everything is XP.  I ran 'Add a new connection' on both machines, but this does not seem to do.

  In other works, how can I add a hard wired computer to a functioning WRT54GS wireless network?

  Thanks for the help.

  * beep *.

  In Windows: Make sure that the workgroup name is the same on all computers.  In addition, all computers must have "file and printer sharing" turned on.  In addition, you must configure at least one shared folder on each computer.

  In addition, go to the computer on each computer software firewall and set it to "trust", other computers on your network.

  I hope this helps.

• Wired laptop but unable to connect to the laptop wireless wireless PC can connect cable PC OK

  I have a wired network on whiich, I connected a WAP54G access point for my laptop wireless to children. They are never anything other that connect to the internet, so I never noticed this before. Now, I bought my own laptop and that you want to connect from my main computer but the laptop is not visible on the network. I then connected directly on the laptop to the network wired through an ethernet cable, and it was visible from the wired PC as you would expect. Back fi he returned invisible.

  Does anyone have ideas, what could cause this behavior?

  Thanks for all your comments

  Presumably using your XP or Vista!

  You need to change network settings into the laptop to allow remote connections according to the directives of the wired connection.

  You will also need to make changes to the false firewall XP/Vista has as well.

  FYI: The WAP54G has no way to filter all network traffic, so the question is not to the AP.

  Concerning

  Fred

• printer offline depending on the laptop wireless

  When you attempt to print from laptop wireless dv6 HPavilion indicates Photosmart 309 a printer offline.  Printer shows connected to the router

  Hi storybook.

  Welcome to the HP Forums, I hope you enjoy your experience!

  I'll be happy to help you.

  I have provided a document for "Printer is off-line" Message appears on the computer and the printer does not print to see if we can solve this problem.

  If you still have questions please provide the results if we can quickly understand this.

  Thanks for posting on the HP Forums.

  Good day!

• «Caching of connections from domain to Vista laptop fault for * some * users, which gives the message "failure of the trust relationship «»

  Greetings!

  I have a laptop wireless problem Vista Ultimate on a domain that has a strange behavior when taken off site. Of course, I'd appreciate some thoughts on what could be the problem.

  When the laptop is used internally, it works normally and is used by two people. Person "A" is the main user, person "B" is a secondary user who connects is rare. Domain authentication works normally and thankfully.

  Sometimes, however, when the laptop is taken off site and brought in a different wireless network do not have access to the field, strange behavior of logon follows.

  When the person 'A' tries to connect, they receive two messages:

  "The system event Notification Service failed to logon"

  "The trust relationship between this computer and the primary domain failed."

  Yet moments later, what person 'B' opens a session on the same laptop in the same place, the logon succeeds and the laptop runs normally.

  Presumably, the two openings of session would be finished via the credentials cached, so there is no reason at all to imagine that each account should be treated differently. However, it is precisely the situation that I see. Something is apparently originally person 'A' logon to be handled in an unusual way, I can't explain or stop.

  When this laptop is returned to its primary location, resumed normal operation, all users can perform normal logons domain-based, and no errors occur.

  If it was simply a problem of not being on the same wireless network and by far the field, I expect to see something in the sense of a message «could not domain controller be contacted...» ", but this is never; and he would likely by all users, no not one. It behaves almost as if caching credentials for the person 'A' are corrupt or non-existent, neither of which is logical.

  Other portable computers used by many people (using various combinations of XP, Vista and Windows 7) and taken offsite have * never * experienced this problem. They operated with credentials cached just like you would expect.

  I suppose that a complete reconstruction could solve the problem, but I prefer not to go nuclear on this particular area if it is not necessary. There must be an if explainable, eccentric, the mechanism at work here cause this problem.

  Thank you very much in advance for the help.

  -David

  Hello Soonerdave,

  I apologize for the lack of communication. The appropriate forum for post you in is listed below:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think