lase jet cm1312nfi mfp color: printer stopped printing - changes nothing, he just stopped.

Similar Questions

• HP Laser Jet CM1312nfi MFP: No compatible Twain installed device

  Hello

  I hope someone can help please. Yesterday, I was using my printer color Laser Jet CM1312nfi MFP multifunction scan a few pages. The analysis went through fine without problem like so many others before. No changes have been made to the system and I am the only person using the computer and the printer.

  About 45 minutes after the last scan, I went to scan another page when I got this message:

  "No Twain compatible device installed, please install one and try again.

  The scanner wouldn't work. I tried restarting the computer and the printer on and outside, does not. I thought that maybe there was a problem with the machine itself or a loose cable or connection but the machine still print documents.

  I tried to use HP printing and doctor Scan and it does not work. He guided me to several pilots. I downloaded and tried one called "CM1312series-win7-full-solution-AM-EMEA1-v5.1". The installation will not fully cross and reverses. The same thing happens when I try to reinstall the original software that I used to use the scanner a few years back.

  Can anyone help?

  Thank you

  Thank you

  I finally solved the problem the next day after several hours of frustration.

  I would like to uninstall the driver software, disconnect the USB cable, and restart the computer. After the reboot, I would try one of the options mentioned previously. At some point, the installation process asked me to reconnect the USB cable and then click on the button 'OK' or 'Continue' in the dialog box for installion.

  However, I noticed that as soon as I plugged in the USB cable, but before I could click the button, Windows would automatically begin to install a driver. That would be doing the same thing. He would install components 6 or 7, 4 or 5 would move to print successfully. A separate status dialog box would jump to the top showing these parts installed. A green check mark appears beside the print functions. However, 2 components dealing with sweeping would not install properly. These components would get a red X next to them.

  During this time, I would have clicked on the button 'OK' or 'Continue' in the dialog box for installion. After a few minutes, the installation abort itself and I would end up having to uninstall the driver and restart everything again.

  Finally, he appeared on me that 2 separate facilities are taking place at the same time. What finally solved the problem after uninstalling the driver and restart again, I started the original installation process, but when I was asked to connect the USB cable, I first disconnected the computer from the internet and then connected the USB cable.

  Before I could click on the "Continue" button, I noticed that the separate installation process began again. Immediately, I clicked the X in this dialog box to put an end to this facility. I then clicked 'Continue' on the installation dialog box desired and it finally all settled. Once it is installed, I reconnected it the computer to the internet and the scanner now worked.

  Thanks for your advice in any case.

• Installation printer HP laser Jet M1120 MFP did not go to my laptop.

  I tried to install my new printer to my laptop. He begins gently then stop.  the printer HP Laser Jet M1120 MFP., it starts the installation and told me that there is problem so windows will install stop, goes no further, you have an answer thank you, my laptop is a windows 7 with 64 bit

  

  Toshiba SATELLITE L850-A919

  Windows 7 Home Premium 64-bit Service Pack 1

• HP Laser Jet Pro M225dw MFP: HP E print App does not effectively bind to the Go Daddy email (HP Laser Jet Pro MFP M225dw)

  I bought a HP Laser Jet Pro (MFP M225dw) and am very excited about the mobile printing option. I downloaded the HP EPrint App on my smartphone (Samsung Note 4) and have successfully my gmail and hotmail accounts related.

  However, I have problems linking my Go Daddy account.

  As per a post on the forum of 2014, I have connected my Go Daddy via Outlook account, used the host name: imap.secureserver.net and Port: 143, SSL: WE. The account "seems" to link; However, when I click on my email Go Daddy Outlook icon, it brings back me permanently to the home screen, (the one that says "Photos, files, Web, Email") such that I'm never able to access really my Go Daddy email account.

  * No error message

  * Bluetooth off

  * 5.1.1 android

  * I have Norton Mobile on my phone

  * Looked at my Go Daddy security settings - no "two-step verification" or "allow the less trustworthy access apps to the ' questions

  Also, I see that this app is not able to print the body of an email; is there a way where information such as details such as email/recipient of the sender of transmission time, electronic mail may be included in the print job?

  Thanks a lot for your time and consideration!

  Hey @Lizaroo,

  Welcome to the Forums of HP Support!

  I see that you have some problems with your Go Daddy email account settings enter the HP ePrint app. For more assistance, your best option would be to contact Go Daddy directly to check all the parameters of the post that you found are correct. Some e-mail clients change their settings often so that I wouldn't be surprised if the info you found is now outdated.

  Printing subject lines and headers, it is not possible to print. The reason is because many users are trying to print photos or documents. In the current situation, if a user were to send an email empty then the only thing that could print would be the attachment. This prevents clients a sheet of paper and the Ink/toner used to print.

  If you have the printer print senders and subject lines you can do so by having the sender to include in the body of the email. Another alternative is to set up an email address which is the sole purpose is to forward emails to the email address of the printer. This way if it is configured to include the information in the body so you will have those printed on the page. Also, this gives the advantage of having a backup of email messages sent to the address of the ePrint printer and if something should happen to the ePrint address, you can change the forwarding address that the email and no one would never know there was a problem.

  Please let me know if you have any other questions. If not, have a great week!

  If this solves your problems, please help other users find this thread by clicking on accept Solution below my post.

  If you appreciate my help, please inform other users by clicking on the icon below my post thumbs up.

• Laser Jet Pro MFP 177fw: cannot scan with Laser Jet MFP 177fw Pro

  I have been using my 177fw Laser Jet Pro MFP on a Mac 10.10 for awhile.  Print, fax & scaning all worked.  I can scan is no longer.  I get the message "the scanner has not completed analysis" (there may be another message before that but it crushed until I read.).

  I use a USB cable for the connection.

  On August 31 I got HP Printer Software Update Verson 5.  What is my problem?

  Thanks for your help.

  Hi @scg117,

  Welcome to the HP Forums!

  I noticed your post about how you can't scan with your MFP HP Laserjet Pro 177fw on your Mac. And I'm happy to discuss this issue scan for you!

  To confirm that the hardware of the printer is functional, you are able to make a copy with the glass of the scanner of the printer?

  To copy:

  1. load the document on the scanner glass according to the indicators on the product.

  2. close the scanner.

  3. on the product control panel, press the button number of Copies.

  4. Select the number of copies.

  5. press the black start copy button or the button color launch copy to start copying.

  Let me know if it works, or if you see another error message.

  If the copy works, then try the steps described in this guide, Scanner USB connection is lost (Mac).

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this post is helpful!

• WINDOW OF 8 AND LASER JET M1319F MFP

  CAN'T GET MY LASER JET M1319F MFP TO INSTALL WITH WINDOWS 8. PLEASE NOTIFY.

  I wasn't sure if you had s 32-bit or 64-bit windows 8 OS so I'm you send a link to the product page. Simply click on the windows 7 32 or 64-bit link and then download the software.

  M1319 mfp

  When the software of windows 8 will be available, I would then replace this software with the windowns 8.

  If you have any other questions, let me know.

  Good luck.

• HP Laser Jet M1005 MFP not WORKING DO NOT IN INTERNET EXPLORER

  In my windows 8 OS, HP Laser Jet M1005 MFP IS NOT WORKING in INTERNET EXPLORER. Advise me, how to solve this problem.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• HP Color Laser Jet CM6040: scratches when printing CM6040

  I have a very annoying problem with my print quality which causes the color to the burrs. Whenever I have print something on my laser jet CM6040 color it leaves a strip of color at the top of the page that spots and affects all pages.
  Recently it was also printing this band at the bottom of the page that you can see in the picture as an attachment. It tends to be worse in the morning when I get to work and first print something and tends to be bad after sitting idle for a while. We have installed a new fusion kit fairly recently so would avoid buying another so soon.

  Can anyone help or everyone knows that before?

  Think about how the image is made on paper. The flow of paper to the top of the side of the printer tray and a secondary transfer roller moves the image of the belt (just the little strip of paper feeds more) in order to fill the document with the complete picture. Continutes to travel at the front of the belt is a wiper brush that removes the residual toner was not transferred to the book and the back side of the belt if another page is printing is the image placed on it as the belt moves on the toner drums. If the belt has a defect in the Wiper Blade, excess toner that is a mixture of all colours (usually purple in color) out of the end of the belt like a streak. That's what I think happens for you. Now one thing you can try who works occasionally for me is to spend about 1 inch belt in the opposite direction, which will expose a lot of toner on the belt. Clean the toner and then advance the belt (always use the edges of the belt to move) and then look below where the belt comes out from the front and see if the line is still present or that it is a party. If passed, then the blade may have corrected itself. If the lines are still present, the blade is bad and the belt needs to be replaced. The cost of the belt is high. You could contact a company like metrofuser.com that may or may not sell belt given to nine for your model see if they have your model in stock. The cost is generally 1/2 of what you have to pay for a new belt, but you will need to return the old belt to them.

• HP color laser jet cm1312nfi can't find hp ews

  I bought a cm1321nfi HP Color Laser Jet printer.  The printer is installed, but not all drivers. The notorious HP EWS reader is not installed and I can't get the scanner to work without it.  Help, please!

  Hello

  As OEM HP is responsible for the good operation of the printer and scanner and their drivers provided.
  Check with HP Support, their drivers and documentation online and ask in their forums.

  Good luck, you need to update or reinstall the latest driver.

  HP - cm1312nfi - software and drivers
  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3562006&TaskID=135&prodTypeId=18972&prodSeriesId=3558902&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Jet L7780 Office color printing problems

  Recently received an error message that my head of printer KY on my model # C8192A Office Jet is missing or damaged. I replaced the print head. The good news is the printer works. However, it is not the green color printing. A ran a self-diagnosis page. All 4 cartridges are almost full and they expire in 2016. Health of the print head was listed as good. Any suggestions?

  John_THello,

  Welcome to the Forums of HP Support!

  I see that you have the Officejet Pro L7780, recently it takes to replace Black / Printhead yellow and now it will not print green. It is possible that the printhead cyan / magenta must be replaced, even if it is listed a "good."

  You will have to perhaps run a level or two of cleaning, perhaps to align the printer. This HP document: Troubleshooting Print quality problems will show you how to perform these actions.

  Let me know if this helped at all.

  Thanks for posting,

• Laser Jet Pro 100 color M175NW MFP

  Hello

  I just bought Laser Jet Pro 100 but have problems to do the installation despite trying several times.

  Initially, the installation seems to work very well and I was able to print out a few pages until I turned off the printer and turned back on again, the impression doesn't seem to work more.

  Attempts to re - install the printer also failed. The error message indicates that the installation takes too long and asked the facility to perform again.

  I get very frustrated for this printer. What should I do now?

  Thanks for your advice.

  I would try a suggestion more. Could you try to install this printer on another computer. I want to see if the installation fails or not. If so, then I will help you. If not, then there are someone on this Windows 7 computer that blocks this facility to settle. Please post your results.

• Laser Jet CP1025nw: Duplex not Printing not available from Mac

  I just bought a new printer HP Laser Jet CP1025nw and install for wireless use. When I try to print from my Mac (OS X 10.9.3) print duplex (manual) option does not appear (in gray) in the print dialogs in applications (such as Microsoft Word, Adobe Acrobat Pro).

  How can I get my Mac duplex workingfrom?

  Thank you!

  Welcome to the Forums of HP GAD25

  By your post, I see that you are not able to select the manual duplex option on Maverick.
  I can help you with this problem.

  The drivers for the maverick comes from an update from Apple.

  You may, or may not be available with this Apple driver option.

  V10.9 OS X Mavericks: installing and using the printer on a Mac.

  Just to make sure they appropriate driver is installed, and not the driver Airprint, go to the Apple menu, then click on System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen should display the name.

  If the name of the printer indicates Airprint, delete and add the printer name back from the list.

  Click on the sign - to remove the driver and then click on the + sign to add the driver, you may need to click the drop-down list to select the printer name to add it in.

  Check the functionality of the two side now if it is available.

  If there is anything else I can help you with just let me know.

  Good day!
  Thank you.

• HP Laser Jet P2035 is not printing

  Original title: print printer print

  Why my printer does not work? This is HP Laser Jet P2035

  Hello

  
  1. What is the exact error message or error code?
  2 have you made changes on the computer before this problem?
  I suggest you to consult the following Microsoft article and check if it helps.
  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows
  Download the drivers and software: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3662026&lang=en&cc=us&taskId=135&prodTypeId=18972&prodSeriesId=3662025

• Driver HP laser jet m1319f MFP problems

  Hello

  When I try to install drivers for HP Laser Jet M1319MFP for win7 64 bit, in installation process half collapse. I tried on different computers with the same operating system, and even--> the collapse of the installation. Pls help.

  Driver name:

  ljM1319-hb-pnp-win64 - in .exe

  Fix adding scanner.

  After you have added printer (as I wrote above), you restart. In devices and printers, you see a yellow triangle to the printer. You do a right click on properties and equipment, part you see 3 drivers with yellow triangles, select one, then click on properties, then inside new window driver click on update driver and to find the driver on your computer, select the folder where you have unpacked hp_LJM1319_Full_Solution - v5.0.exeand the computer folder use driver. Repeat on the other marked with a yellow triangle and everthing works - scanner and fax.

  Thanks for the tips.

  Travis Bye

• Color Laser Jet M277dw MFP: Print quality

  Just got this new printer today.  Already, I'm sorry that I bought.  Too complicated to implement.  It replaced an Epson Office Jet which was VERY user friendly.  Support staff is fairly dismissive.

  I tried to print a greeting card with a colored background and white printing.  It print out okay, but the impression was black and unreadable.

  Any ideas?

  Just consider return it for a refund and buy something else.