LaserJet 1000: laserjet 1000 usb or parallel?

Similar Questions

• HP laserjet 1200 using windows7, wired to the printer with a USB to parallel adapter

  HP laserjet 1200 using windows7. My computer has USB ports, but no parallel port, if the computer is connected to the printer with a USB to parallel adapter. Sometimes works very well, sometimes States printer system as ready, but do not print. Reboot hardware and upon restarting, I got a page to print. Next attempt to print updates the document in cue, but is right there - no error message. Finally, after several reboots, I managed to do print (have no idea how), but now I had to print 20 pages one page at a time. It will print no more than one page, even if I have to print the 20. Next time I start the computer I don't know if the printer will print. Do you need to use the same USB port each time, or are USB to parallel unreliable maps?

  Hey renradd!

  Unfortunately, in addition to the adapters USB can be unreliable. Only a new printer, I don't know what it will provide you with a fix for this problem. You can try a different card if you have one, but if it still does not work, I would look for in a printer capable of supporting your computer.

  I hope this helps!

• Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless.

  Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless. (Instructions say I need cable to do).  How can I set up wireless without buying a new usb cable

  loudford73 wrote:

  Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless. (Instructions say I need cable to do).  How can I set up wireless without buying a new usb cable

  Hello

  If the instructions that you need a cable then you need a cable. On several printers now, you don't need USB cable for Setup (that's why many boxes do not have) and you can run the installation on your computer or a button on the printer.

  Kind regards.

• printer problems / deskjet 5550 not work with usb to parallel / tried everything

  Hello

  Could someone please help. I'm not getting my old printer HP deskjet 5550 for work on an Acer ASpire 5542 laptop, I got the cable converter USB to parallel (1284) this morning - since... no joy in getting it to print.
  -L'usb parallel cable driver installed first during the connection that
  -L' printer was connected, then added via Device Manager "add a printer".
  -It has been added to the level local port and selecting a port usb001 or usb002 virtual printer (it's the usb/parallel cable)
  The printer is offline. A paper, ink - any installation to go.
  Can someone help me please?
  Thank you / simon

  Parallel USB cables can be problematic, and in this case is not necessary.  The Deskjet 5550 has a USB port (in addition to the parallel port).  Install the printer such as described in this page.

• HP LaserJet P1102: USB not recognized during installation of HP LaserJet P1102

  I have a Sony Vaio VPCEH computer laptop with Windows 7 and when I run the disk I got with the printer on my laptop, that the installation procedure works in what concerns the section "Install printer Software". When you are prompted to turn on the printer and connect the cable USB to the laptop it says 'USB not recognized '.  I tried all 4 slots USB into my laptop but the USB still appears as an unknown device with an exclamation point in a yellow triangle. I searched internet solutions and tried to uninstall the unknown device in Device Manager and restart the installation with the disc, I also tried clicking on the unknown device driver software update but it says the software driver is up to date and still, it shows as an unknown device and is not recognized. I also tried to uninstall the HP software from the disc on my laptop and that reinstall but nothing has worked. I felt for over 2 weeks now and have not been able to use it because of this problem and I really need for University, so I would be very happy if someone could please give me a solution to this problem

  Hi @Janemaguire,

  Have you tried another USB cable?

  Because the printer is not detected on the Mac, it may be the USB port of the printer.

  What happened when you tried to install the printer on Mac?

  Error messages?

  What is the model Laserjet P1102w?

  Let me know. Thank you.

• HP laserjet 1005: usb laserjet 1005 to network connection

  I have a usb Hp laserjet 1005 printer, I want to convert it to a wireless printer. This CAN be done?

  I have a netgear N600 router for my network.

  And also a wireless Epson Xp 960 for photo printing.

  Connection Hp laserjet 1005 to the usb port on the Netgear N600 router did not work. Can it work with appropriate software.

  Connection laserjet 1005 p for the wireless Epson XP 960 were printed.

  Any advce is appreciated.

  Using 32 bit win7.

  Thank you very much.

  Hello

  Your printer does not support with/without wire and your router cannot act as a wireless via USB port print server:

  http://www.downloads.NETGEAR.com/files/WNDR3700v3_SM_20MAY2011.PDF

  You can purchase a wireless print server, BUT believe me, it would cost more than buying a new printer with wireless ready now and 50 percent chance he'll give you a lot of problems. You can also buy a new router that has the option of wireless print server. I don't know to connect two printers.

  Kind regards.

• How to reinstall LaserJet P1102w USB wireless?

  I use Windows XP and have a LaserJet P1102w, who was installed with a USB connection.  I have a wireless connection.  What I need to first uninstall the USB and then reinstall wireless using the installation disc?  If this isn't the case, reinstallation replaces the USB key, or make options USB / wireless?

  Download the user guide here...

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&DLC=en&document=&product=4110396

  and follow the instructions on how to configure your network.

• WIndows 7 64 cannot locate/install print driver for a HP Laserjet 1022 USB on a box of XP SP3 32 bit

  I tried several times to use the original installation disc, the latest version of the software driver hp Forum, etc. All with no luck. And now, of course, my host system is all messed up with installs partial. I know it works because I saw another W7 - 64 box to connect to the same XP machine via the network. I need measures to clean first the disorder of my current box then the steps to connect to the printer on the XP machine over the network. This is similar to a question last may, who seems to have been abandoned.

  Poster 8lives gives the following solution in another thread:

  http://h30434.www3.HP.com/T5/printing-issues-troubleshooting/Windows-can-t-find-a-driver-for-HP-LaserJet-1022-on-the-network/TD-p/1539549

  On the Win 7 computer...

  Devices and printers

  Add a printer

  Add a local printer

  Select create a new port:

  Select Local Port for the port Type:

  Enter the name of the network to the XP computer that is. \\XPcomputername\LJprinterid

  Install the LaserJet 1020 driver when prompted

  This did it for me.

• HP Laserjet 4300 usb

  How can I connect my 4300n to my laptop which has only a usb port? OS is win 8.1.
  Thanks for any help.

  Hello

  Well, it's time to go and get a new printer or keep it to connect to your old computer. You can't find a good USB / parallel for Windows 8.1 now and you will not be able to find the driver for your printer.

  Hope it makes sense.

• I can not connect windows 7 to an old Canon BJC 250 (have USB to parallel cable. conv)

  I have a Canon BJC 250 printer connected to the USB port ieee. Its a printer Workhouse. Never had a paper jam all these years. (1996), I found ink cart. to do this in a thrief store. I can't seem to part with them. His semple to operate and works better than my Dell 725 and the Epson conbo. I would like to know if there is conpatable with Windows 7. I can't install the driver of this OS. If anything can work with other pilots from cannon. Notes; I still have the installation CD. but it will not be installed.

  If you go to the website of Canon in the following link, it shows as the latest drivers for XP.  In addition, if you click on "Service and support" at this link and then search for "Windows 7", you will find a document that lists the BJC series printers that are supported for Windows 7 and the 250 is not on this list. "  Here is the link to Canon: http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/bjc_series/bjc_250_series#ServiceAndSupport
  I thought that maybe the BJC-240 which is support could be close enough, but based on what follows, where the user asking the question said he tried this driver, apparently we don't: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/canon-bubble-jet-bjc-250-printer/d27af8d2-a770-e011-8dfc-68b599b31bf5

• HL 1250 printer with Logilink USB to parallel cable parallel

  
  
  

• Windows 7 printer and HP1120c using gigaware usb, a parallel printer cable is not recognized by plug-and-play

  I can't get my printer recognized by plug-and-play.  I have installed a printer manually, but still can not get to work.  All boards

  Hello Kirk,

  I'm not sure what you mean by "manually installed", but you need a print driver for the printer recognized by Windows. Go to this page to download the driver you need for whatever version of Windows you have: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=14497&locale=en_US&taskId=135&prodSeriesId=25522&prodTypeId=18972&lang=en&cc=us .

  Once you have downloaded the right print driver, I let the computer do the installation.  NOTE: you may need to completely uninstall what you've done "manually" so that the correct driver is working correctly. See the HP Web site for more information (I'd do it, but I do not know what operating system you have and its depth of Bit (32 or 64)).

  Post here if you need further instructions or assistance (be sure to include your OS and Bit depth). Let me know how you fare.

  Kind regards

  BearPup

• HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?

  HOW CAN I GET A HP LASERJET 4V IN ORDER TO PROPERLY USE THE OPERATING SYSTEM TO XP PRO AND USB USING A PARALLEL CABLE?

  The printer works at all with this cable?

  The cable has recognized and installed by Windows XP when you logged on to the computer?

  If the cable has been recognized, what steps have you taken to install the printer then (be as accurate and complete as possible)?

  You get an error message?  If so, please provide, without paraphrasing.

  This printer has already been installed on this computer?  If so, with what type of connection?

  And especially, what is the brand and model of the USB to parallel cable?  Many of them do not work.  See, for example, the comments here , which suggests that 25% of the units will simply not work.  This seems to be one of these products you should buy at a local store, rather than on the Internet, then you can continue taking it back until you get a working unit.

• Connect a printer HP Laserjet 4 parallel via USB using Windows 7 Home Premium 64-bit - HELP!

  I have a new Dell PC (Windows 7 Home Premium 64-bit) that does not have a parallel port to connect an old HP Laserjet 4 printer.  I bought a USB to parallel to connect the PC to the printer.  When turn on/off the printer, W7 installed an IEEE-1284 controller that appears in the unspecified list of devices in the control panel.  I "Has added a new printer", select "USB001 virtual printer USB port", then choose the correct printer driver (after "Windows Update" get a longer list).  When you try to print a test page, the 'ready' light on the printer starts to print, but nothing else happens.

  After experimenting with different settings, I was able to get a page to print that says "* s1M.  I don't know how it happened or what it means.  This suggests that the PC is 'talk' to the printer.  However, I was unable to reproduce this.

  HP support was able to help me, and I've been searching for an answer.  Someone at - it suggestions?  I wouldn't give up using a "workhorse" reliable printer for years. "

  You do not have a parallel port on the machine.  Whatever it is sent to the parallel port device should fail on writing.   Change the port to the port of USB00n, created when you plugged the cable.  You will see the port listed in the list of ports.  This will usually USB001 when you have not all printers attached otherUSB. Alan Morris Windows printing team;

• How to connect my LaserJet 4500 to USB on new HP Pavilion Elite desktop 9517

  I have a new desktop Pavilion Elite M9517-c and you want to continue to use my hp laserJet 4500 color laser printer that has no USB connectivity.  Can you recommend a printer with a USB cable so that I can connect these two? Is this possible?  The printer is in great shape! Thanks for your response in advance

  My God, you're right it isn't the adapter, you need, sorry, here check this link

  http://www.emtcompany.com/catagories/USB-to-parallel-adapters.htm?gclid=CISz2-n2m5kCFRwDagodTU5aCw or

  This one

  http://www.cablewholesale.com/cgi-bin/googletrack.cgi?URL=/catalog/usbadaptors.htm&gclid=CKSK9qP3m5kCFSMSagodPAaICw