LaserJet 4 M liked

Similar Questions

• Printing problems with HP LaserJet 4050 TN

  Hi all

  I have a HP LaserJet 4050 TN and I connected on my desktop Dell (8 64-bit Windows) with a parallel cable / USB (TrendNet 1284).

  When I try to print, nothing happens (eventually I get an error message from Windows 8 on the right that says: "error of HP LaserJet printing...) The printer could not print").

  The printer is on, of course, and it is able to print (for example, test configuration page prints very well).

  From the printer connection, looks like it automatically installed the HP LaserJet 4050 Series PCL 5 driver.  I tried to update and it says that it is up-to-date.

  Any ideas what the problem may be?  Thanks for any help you can provide!

  ----

  Edit

  ----

  Just to add that this printer model seems not support a network connection for the HP site. I try the parallel-usb connection since it seems to be the only option to connect the printer to my computer.

  More that likely the IP you have assigned manually whenever you got the printer. The Jet Direct card is when you connect the ethernet cable into the printer. I have 2 screws in the top and bottom.

  What I would do is a cold reset so your home network could affect its own IP address.

  With the printer off, press the big green button, and then turn on the printer. Wait what he say cold reset on the display, then release the button. Connect your network cable, wait about 1 to 2 minutes for DHCP to assign an IP address and print a configuration page. The second page will show you the IP address.

  Then go to your driver, click on Ports and change the port to a Standard TCP/IP port. If it is not available, then create a new port. Enter the IP address of the printer and print a test page.

• HP Color Laserjet 2605dn: Print is washed out/completely wilted on printer 2605dn

  We have a Laserjet 2605dn HP color printer has intermittent printing problems. Most of the time, the quality of the printed output is very well, but from time to time, the print quality deteriorates completely. After a while, printing then returned back its normal quality.

  The printer is on a network and serves as WIndows XP/7/8/10 and Linux machines as it has throughout his life. He has never had a genuine HP toner cartridges installed. It is not heavily used, we print usually less than 100 pages per week, often less.

  The problem is that out of all the colors and black, gets so bad as to be unreadable. The printed output is so washed out it's (almost) impossible to read anything through the entire page. This can happen for all the pages of an entire document, but often it will print the first part of a multipage fine print job and then the quality deteriorates gradually to illegibility. Subsequent print jobs will also sometimes unreadable, but are also likely to print correctly. There seems to be trigger (that we can determine) this behavior or when it will happen well.

  While the printer was used for a few years, he printed out a little more than 20 000 pages in total. This leads me to think that age should not be a problem. We replaced all the cartridges, tried recalibration, print cleaning pages, all without success. I found a solution for a problem of fading Magenta also requires cleaning the mirrors, but our problem is not that same as - everything fades to nothing in our printer, it is not a case of a single color fade a little, is much more radical than that.

  Suggestions as to how we could solve this problem? Is there additional information that might help diagnose the cause and suggest a fix?

  Thanks in advance for your suggestions.

  It looks like I won't get my hands dirty inside this printer after all. The boss decided it would probably be too annoying overall for me (US) to try to fix it. So he decided to buy a new color printer and remove it.

  Thanks for the answers to my questions.

  Now I just need to find how to mark it as "resolved", or otherwise close it, as appropriate in this forum.

• HP laserjet 2200dn: false jam hp laserjet 2200dn

  I have a laserjet 2200dn which worked very well so far.  Tried to print an e-mail and all three lights are solid lit.

  There is no jam.  I turned off hard twice for more than 15 minutes each time.  Printer cycled through its normal and is starting operation went to normal sleep both times, then entered the error condition when told to print.

  That essentially means it was one or a 49 error 79, he interprets as a trainer.

  Sometimes when you print a file that causes this problem if you are using a postscript driver, it will work, or if you have an option to print TrueType fonts as bitmaps in the driver settings.

  Since you are using a Mac, it is likely that you are using a PostScript driver, but I'm not familiar with your operating system.

  If my post is solved your problem and click the accepted as button solution under him.

  In order to thank a Tech for a post click the thumbs up button under the post.

  You can even click on the two keys...

• Color LaserJet MFP Pro200: Only a picture scratched when copying or scanning

  Whenever I'm doing a scan or trying to copy a page, all I get is a page with thin stripes, up and down. I did a last, I tried to make a copy in color. I have a page of stripes coloured accordingly. Others I made black so the stripes are only black and white. It does if I do a scan or try to make a copy of something. I did scans with success until last week. Do not know what is happening. Thanks for any help.

  Hello @awestruck,

  I understand that you are experiencing quality problems when scanning or copying on your HP LaserJet Pro 200 M276nw MFP color. I would like to help you today to solve this issue of quality. If the question scratched image produced through both the dish and the ADF on your computer, then your printer is probably affected by a power or programming problem. If the striped image problem occurs through the dish or the ADF, but not both, then there is likely debris sweep across which is at the origin of the defect. Can I please you follow the steps below to resolve this issue.

  • Problem 1: Striped Image occurs in the dumpster and automatic document feeder:

  Step 1: Check of power:

  Please ensure your printer is plugged directly into a wall outlet for power. Power strips and surge protectors can cause HP printers lack power and will not work properly. Once your printer is plugged directly into a wall outlet, please run a test copy to see if the problem is resolved. If the problem persists, proceed to the next step.

  Step 2: update Firmware:

  There may be one occurring problem of programming of the internal Firmware in your printer. The Firmware is the internal "brain" of your printer. It determines what the printer is and how the printer it. If there is a corruption in your printers programming it can cause problems with your machine performance. Can I have it please click here to download the latest Version of the Firmware. Once the Firmware has been downloaded, please follow the instructions on the screen to 'send' the latest Firmware for your printer. Once the Firmware has been updated successfully please test scan and copy functions to see if the problem has been resolved.

  • Question 2: Striped problem occurs of the bucket or the ADF, but not both:

  Step 1: Clean the machine and check the settings:

  Please click here to access the appropriate support material. Once the document opens, please run through the procedure to search for tasks or debris on the glass flat or the mechanism of the automatic document feeder. Once the troubleshooting is complete please try to copy and scan to see if the problem is resolved.

  Please reply to this message with the result of your troubleshooting. If the problem persists, please let me know if the lines problem since charger document both flat. I look forward to hear from you!

• HP LaserJet M276n printer: printing DVD labels

  What color HP LaserJet Pro 200 M276n able to print DVD labels?

  Hello

  There are 2 types, I don't know that you are asking

  1. print the labels on paper model: you need a good software otherwise most likely you can get arounf 25% of results because the hole don't align. As @wb2001 mentioned above, the label will not long stick and my get stuck in your player.

  2 print directly to DVD printable, well no, your printer will not support it.

  Kind regards.

• MFP HP LaserJet Pro 400 M425dn will not print the text to format 72 points or more

  My workplace has recently bought a M425dn of MFP HP LaserJet Pro 400 all-in-one printer. It works perfectly except for the fact that it will not print text that is 72 points or larger in size. I tried many fonts that are installed with Windows, and all them print correctly to the point size 71.5 or smaller; Another thing simply does not appear in prints. Content which is of size to 72 points or more * fact * affect the flow of the content printed on the page, however. It's like the 72 points or larger text takes up space, but it is completely invisible on the printed page.

  I tested using Microsoft Word 2002 on three separate computers, of which two have installed Windows 7 and Windows Vista installed. The problem is the same on all three computers. The printer is connected via an ethernet cable to our wired network. I have installed the printer software included, and I don't think that there are updates for it that have not been installed up to this point.

  Any thoughts on how to solve this problem?

  Hello, I just made an account to solve this problem for you guys because it has been a puzzle to me also...

  I apologize before the huge hand for the terrible grammar and punctuation that I'm in a hurry

  Now it does not work for everyone but I fixed it on my machine with the following

  now before you print it... .use (ctrl + p) in your text editor to open the print window, click (properties), and then navigate to the tab (Advanced) now, I have a section called the characteristics of the printer in this category there is an option to 'send truetype as bitmap' activate this and see if it can help someone of you, for me, with this PERMIT I can print any font size my processor will allow me to type

  in my machine's plug

  Reference Dell d6420

  Win7

  Msoft word 2007

  printer itself is

  HP laserjet 200 color m276

  printer driver is

  HP LaserJet 200 color MFP M276 PCL 6

  I understand that this printer and driver is not identical to yours in itself, but the nature of these drivers makes it highly likely that this solution works for most of you

  If this can help, someone else did post more because I'll probly do not sign in to this site I created this account just for this post and I hope to solve this annoying problem issue for many of you... .no necessary congratulations

• My printer HP LaserJet 1536dnf printer prints black pages after replacing the toner with a new one!

  I changed the toner cartridge for my printer HP LaserJet 1536dnf with a genuine HP toner cartridge and now it's printing the pages in black.  Any suggestions on how to fix this?

  Thank you!

  Hi @Beaglemom49779,.

  I see by your post that you have replaced the toner and now get all black pages. I can help you with this.

  Have you had the same problem with the printer before replacing the toner?

  It could be a hardware or with the printer fuser problem.

  If the problem started just after replacing the toner then most likely, the toner.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector)

  Number one cause of problems with toner.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, black on the drum, or any other damage on the imaging drum, replace toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  Please call our technical support if the there is a problem with the toner and you learn about a replacement, to the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Contact HP.

  Good day!
  Thank you.

• Toner cartridges HP LaserJet M1132 not delivering full capacity

  I have a LaserJet M1132 MFP bought last week. USB connection, OS is Windows 8-64 bit. Have upgraded to the latest firmware. Driver is the latest driver for Windows 8. The settings are default (fastres 600).

  When using the cartridge provided initial toner with the device, it delivered only about 250 pages of text (text of the note and no graphics) before he missed. I know because I bought three reams of paper when I bought the camera and used half of a package. Coverage was about 50% per page, double-sided. I took and he trembled, but this made no difference.

  I bought two new original HP CE285A cartridges as I bought the printer. I was wondering if the original cartridge was a reduced capacity cartridge. So I installed a new cartridge. The toner light came after printing 935 pages (from the status page). Once again, the majority of them were text pages to 50% coverage double-sided.

  Each cartridge is £75, resulting in a cost of about 8 p/page page (not counting the cost of the printer) that is outrageous for a laser printer. Packaging estimates approximately 1,500 pages per cartridge, but I clearly did not get anywhere near this with the first cartridge and I don't get that with the other or the other. I have an another HP MFP (3500), which delivers about 5 trains before a cartridge runs out.

  I am a very experienced with 25 years in the printing and imaging user and know that estimates assume some coverage. I use a heavy cover. I am very dissatisfied with say the least. Your help and advice appreciated.

  Concerning

  Tony Harris

  The only thing you can do to try to extend the life of the cartridge a bit more, it's allow EconoMode on the print driver.  Most likely, this has been activated on the devices tested for the performance of the cartridge.  I'll include instructions to allow below.  Let me know what happens.

  1. Click on the start menu.
  2. Click devices and printers.
  3. Right click on your printer.
  4. Select Printer Preferences.
  5. Click the quality tab.  It can be labeled as the paper/quality tab.
  6. Click the box next to EconoMode to enable it.
  7. Click on apply to save the changes.
  8. Click OK to close the window.

• HP laserjet 1218 nfs: fax memory

  I have printer hp LaserJet 1218 nfs it has built 64 MB can I retrieve my faxes After erasing all faxes saved. Second, 64 MB of memory is built on board or it can come off so that I can retrieve by using various software

  Hi @k_bansal1 ,

  By your post, I see that you have some questions related to the nfs HotSpot Laserjet M1218 printer. I'd love to help you.

  Once the faxes are cleared from memory, they are gone.

  The data sheet, provides just the classified memory 64 MB. It does not show whether or not it is on board.

  Most likely it is on board for this model. MFP HP LaserJet Pro M1218nfs Hotspot.

  Other models have an option to add memory to the printer.

  This information has been provided by this document. Printer Specifications for series MFP HP LaserJet Pro M1130 and M1210 and HotSpot printer HP LaserJet Pro M1218nfs multifunctional series.

  Sending faxes specifications - series M1210 and HotSpot M1218nfs only

  • Full feature fax features with a V.34 fax; includes a phone book and the characteristics of delay-fax.

• Color LaserJet 4600: Clear Magenta Toner streaks vertical

  Hi have a Color LaserJet 4600 printer that produces very fine vertical streaks of light on the magenta.  What is a toner problem?  Is there a warranty on the cartridge?  Thanks for any help!

  Most likely the toner cartridge is bad, isn't it a color.  HP Toner come with a warranty, howerver, they must be returned to the seller with whom you bought for replacement.

• LaserJet MFP M277dw Pro: Windows installs its own printer driver after failure of wireless printer, print

  It is a problem really bizzare, I will try to explain as clearly as possible what happened:

  • I have 277dw LaserJet MFP Pro, which is connected to my PC via wireless network. I installed the drivers from HP and everything worked as a watch movement - printing and scanning.
  • Yesterday, the power is out for about 30 minutes. Computer stayed on thanks to UPS, but the printer power loss.
  • Once the power was restored to the printer, printer initialized and I was able to access his page of HTTP status without problems. All the parameters of the printer has persisted. Same IP address. Printer all self-tests pass. However, I have lost the ability to print (printer shows more as an option in the print dialog boxes). Scanner works as usual, save the scan to a network folder.
  • The State of device HP icon has disappeared from the taskbar.
  • A bunch of new entries titled "NPIF7BB8E (MP Color LaserJet MFP M277dw)" appears in the Device Manager. This 'new' device appears in the Device Manager 5 times under different categories of devices (see attached screenshot). In the Event Viewer, I discovered that Windows installed for this device right when the power has been restored to the printer.
  • Under control panel-> hardware and sound-> devices and printers, all devices installed by HP are grayed out and their status is not connected.
  • Restarting the computer does not resolve this issue.

  Anyone have any ideas on what is happening here? It's the second time this has happened - I was able to fix the first time by reinstalling the printer drivers. However, I don't want to have to do every time the failure. This looks like a bug in Windows or the drivers.

  Thank you!

  

  Hello

  Most likely your operating system is set to automatically install the drivers, when the lost connection the WPS driver build has been added.

  Try these steps and check if that helps:

  1. In Control Panel, select network and Internet.
  2. Open the network and sharing Center.
  3. Search your active network profile, it appears just below the name of the network (for example Private Network, work network)
  4. The side pane select change advanced sharing settings.
  5. In the profile category, uncheck 'automatically enable the configuration of the connected network devices '.
  6. Click on save to confirm.
  7. Devices and printers remove any element M277 printer), as well as Device Manager (remove the two original HP or WPS item, you should see is no longer the M277.)
  8. Once select start > all Apps > HP > HP Laserjet M277 and select the shortcut to reconfigure the device, it can appear as the printer software installation & connect a new printer, etc.

  Hope that helps,

  Shlomi

• LaserJet CP1025NW: Power paper LaserJet CP1025NW problem

  I installed a new LaserJet CP1025NW yesterday and it was working fine. This morning the user was printing and paper began to go through the printer, he proved on the side and stuck. The user removed the book and found a small piece of black plastic that was broken and bent. She has been aligned on the left side of the feed roller bar (the right side has also a.) Part number molded on the part is "RC3 - 0170 1-2» I was not able to find this listed anywhere part. Is it available? Thank you.

  Hi @WadeDunham,

  Welcome to the HP Forums!

  I noticed that you have a broken with your printer LaserJet CP1025NW part. I am pleased to see that for you!

  According to the site http://partsurfer.hp.com/ , this part doesn't seem to be available. Most likely, if there is a piece broken with the printer, the printer itself will need to be replaced/repaired. Please contact HPtelephone support for further assistance. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP LaserJet P2035n: HP LaserJet P2035n is supported pcl5?

  HP LaserJet P2035n is pcl5 support? You can install HP LaserJet P2035 with pcl5 in windows 7, same hp laserjet 1320? (I'm sorry, I can't speak perfect English)

  According to the specifications of the LaserJet P2035n printer, the print language supported are:

  • Printer languages: Host Based, UPD (HP PCL5e)
  • Fonts/fonts: 45 TrueType fonts

  Perhaps implying that:

  • The default printer driver is likely to be a host-based driver.
  • The printer supports PCL5e
  • This support can be limited when compared to other printers PCL5, which usually have fonts 80 or more present in the printer.

• HP Laserjet P1102W: Poor print job

  I bought a HP Laserjet P1102W, and after printing of less than 500 pages, he started leaving large voids in the pint. I replaced the cartridge but it is printing a gray, not black. It tells me that this is not a problem with the cartridge, but with the machine. I don't know what part needs to be replaced.   An office supply place told me that it would be cheaper to replace the printer.  The printer is a little over a year - I will not have to pay twice.

  Hi @Officework ,

  I see that you have problems when printing you get gaps in the impression. Have you tried a new toner and it's printing in a light gray now.  I would like to help you today.

  If you have not already, remove the toner and gently swing the toner back five times to redistribute the toner.

  Check if the drum unit for damage:

  1. remove the cartridge of toner product and check that the tape has been removed.
  2. check the memory chip for damage.
  3 examine the surface of the imaging drum on the bottom of the toner cartridge.
  CAUTION: Do not touch the roller (Imaging drum) on the bottom of the cartridge.

  His fingerprints on the imaging drum can cause print quality problems.
  4. If you see the scratches, fingerprints, toner or other damage on the imaging drum, replace the toner.
  5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem is resolved.

  Try the following steps to see if it will solve the problem.

  Troubleshooting print quality problems.

  If the status of supplies page prints darker, then it is most likely a setting in the printer driver.

  It may be a problem with the hardware or the merger of the printer, it is not a replaceable part. You would have to

  Call our technical support at the 800-474-6836 to see if they have a job in the options available if you wanted to go that route. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  You use Genuine HP Toner?

  What kind of paper do you use?

  If you need help, let me know.

  Have a great weekend!
  Thank you.