LaserJet M1132 MFP: Windows recognize my printer into the cd drive.

Similar Questions

• HP Laserjet M1132 MFP: drivers for MFP HP Laserjet M 1332 in Mac OS 10.9?

  Hello!

  I just changed my old Imac (OS 10.5) to a new one with an operating system of 10.9, and now I have problems to install my HP Laserjet M1132 MFP. I can't find the drivers and do not know what I do. I read in another post, there is a way to install it without drivers, but the link in this post was broken. Everyone knows?

  Thank you very much!

  Arturo

  Hi @ArtMN,

  By your post, I see that you need the driver for Maverick. I would like to help you today.

  I have provided a document to see how to install the printer through the Apple updates.

  Installation of a Mac printer driver by using the Apple software update.

  When you add the printer, you will need to click the drop down menu to select the name of the printer in the list to add it in.

  I hope this helps.

  Have a great day!
  Thank you.

• ATI Mobility radeon HD 4500 series reported an error code 43 and he he had stopped working, so my printer Laserjet M1132 MFP had stoped printing.

  My computer said that ATI Mobility radeon HD 4500 series reported an error code 43 and he he had stopped working, so my printer Laserjet M1132 MFP had stoped printing. How can I make it work againg?

  SHELF MODEL: tm2-1010ea

  SERIAL NUMBER: CNU0290H5H

  Any required driver updates should come from your support site for PC manufacturers, HP? and not Ati or windows update

• HP Laserjet M1132 MFP is too slow on the network!

  Hello

  My HP Laserjet M1132 MFP is too slow on the network!

  I connect the printer to the windows XP 32 bits SP3 using UBS port. The printer works fine on the local computer, but when he shared on the network running too slow, for example with the print test page it takes about 45 seconds to print and other documents, it takes much longer.

  I installed the last form HP driver site and update the firmware it the latest version.

  It happens on other Windows XP machines as well.

  I have connected the printer to my laptop (Windows 7 64-bit) and it works very well (no delay on the network) and it seems that this problem have some relationship with the windows XP Driver.

  I used the trick of local port on computers remote (instead of the normal method) like this:

  "add a local printer.
  "new port".
  "localport".
  \\XPcomputer\HPPrinterName port name

  but still nothing!

  There is nothing wrong with the network, allows us to use a Samsung printer on the same machines on the network without problem.

  I really appreciate your HELP!

  It seems that no one on the planet has the answer to this question!

  The only available option is to upgrade your operating system to windows 7 (vista can work, I have no idea!).

  He wat the only solution for me.

• Scan works only on Laserjet M1132 MFP

  I have a problem with scanning on Laserjet M1132 MFP. Print and copy works without problem. But when I try to analyse the scanning application crashes. It says busy and does nothing.

  My OS is Windows 7 64 bit, I tried to update the firmware, but that did not help with the problem. When I try to scan it says busy. In fact, you hear as if the scanner tried to analyze something, but the software does not move and repeat that he is busy.

  No clue as to what could be the problem?

  I found the problem. I had the printer connected to a USB cable for the previous printer (Laserjet 1020) and did not use the original supplied with the M1132MFP.  After I plugged the original cable scanner has started working.

• HP LASERJET M1132 MFP: HP LASERJET M1132 MFP Mac connection

  When I plug in Mac OS X Yosemite for HP Laserjet M1132 MFP or EPSON L210 it always slowed down the printer

  Why does this happen?

  Welcome to the HP Forums @vladimhirXenon,

  I will certainly do my best to help you, however, I would ask that you please let me know some more useful information to help me the problem of the research for you and to clarify the issue.

  Please respond to me with the following. If there is no action here that you haven't tried, please try them before you answer and include the result in your response to me:

  1. How the printer is connected (USB / wireless / wired / Bluetooth)?
  2. Did you test functionality of the hardware (made copies) and they work successfully?
  3. You can print from any program?
  4. Have you tried
     1. Reset the printing system
     2. Repair disk permissions and to reinstall the software?
  5. Have you made recent changes to your establishment (moving, upgrade, downgrade, new software, new router, etc.)?
  6. Is the printer plugged directly into the wall (avoiding bars and surge arresters)?
  7. Did you complete all updates of Mac OS?
  8. Have you tried using a different USB/Ethernet cable?
  9. You see messages of error codes and if so, what they say and where do you see them?

  Thank you

• M1132 MFP - WINDOWS SERVER 2008

  Hi, I had a LaserJet M1132 MFP printer shared over a LAN network (it is installed on windows server 2008 as the title suggests).

  When I print a document, I get two different problems:

  -Pages in landscape orientation is printed with normal orientation.

  N ' regardless of the number of copies I select in the print options window, the printer will print just one copy.

  If I print from the server itself, I get the same results. But if I select as the printer the printer (printer redirected to user TS) TS copy, it does not print correctly. Problem is that I can't share the redirected printers.

  Any advice?

  Thanks in advance.

  I think that using another print driver will be a solution for this. The problem is I don't have a version of the OS or printer, that you test things. I can point you in the right place to find the other drivers, but you need to try different until you find one that works. When you find one that works, I would like to know what it is please. Let me know how it turns out.

  1. click on the start menu.
  2 click devices and printers.
  3. right click on your printer.
  4. Select printer properties.
  5. click on the Advanced tab.
  6. click on new driver.
  7. click on next.
  8. Select HP in the first list.
  9 select a Laserjet driver in the second. You need to maybe come back and do this step a few different times to find the right driver Laserjet.
  10. click Next.
  11. click on finish.
  12. click on apply.
  13. click OK to close the window.

• LaserJet m1132 mfp: what is the best fully functional LASER JET MFP with YOSEMITE

  Hello

  I have a hp laserjet m1132 MFP

  print and copy works fine but scanning produce a white sheet

  looked all over the web, but it seems that this function is not supported by the mac os x 10.10.3 yosemite

  so I need to buy a new printer (all-in-one)

  can anyone recommend a printer already tested with YOSEMITE and all the workers of the service

  scanning is a must for me

  Thanks in advance

  Hello

  Supported scan Yosemite for your printer, try analysis through Capture of Image,

  If it is the program that you want to scan to try to install the latest version of driver below:

  https://support.Apple.com/kb/dl907?locale=en_US

  Also I suggest to try the HP Easy Scan software and check if can provide best results year on year:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Please let me know if any of these steps can help you.

  Shlomi

• Can I make a search on the network with HP Laserjet M1132 MFP that is connected to another computer?

  I can't seem to be able to scan with HP Laserjet M1132 MFP on the network (printing works fine). Is it possible, and I just don't know / are unable to connect or it doesn't have this feature?

  * Everything works fine on the computer that is connected to the multifunction printer over USB cable

  Hi Deividas,

  I can't wait to hear that you have questions.  For the LJ 1130 base series networking is not supported, however for some 1132 models Ethernet network is supported.  It will depend on the exact product/model number for this unit.  Click here to find out how to set up a wired network for 1132 connection the selection of models that supported this option.

  1A configuration of network peer-to-peer sharing of the computer that is connected by USB?

  2. What is the number of product to the rear of the unit, should start with J?

  3. how you analyze (front panel, scanning software, etc.)?

  Let me know and we can go from there.

  Kind regards

• HP LaserJet M2727 MFP Series PCL 6 - prints the blank page before and after each document in all cases

  HP LaserJet M2727 MFP Series PCL 6
  prints blank page before and after each document in all cases
  Does anyone else have this problem.

  It must be a preference setting, but I watched three times and CAP does not seem to determine what setting to change.

  See if they help you:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c01477176&prodTypeId=18972&prodSeriesId=3377075

  http://h30499.www3.HP.com/T5/printers-LaserJet/LaserJet-M2727-NF-can-I-suppress-blank-pages-with-this-printer/TD-p/2359555

  http://superuser.com/questions/315522/computer-prints-blank-pages-before-and-after-content

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  Original title: computer disc drive

  Download or CD extract of music reading, record music, download CD etc... Before my hard drive had to be replaced, when a disc is inserted into my computer, a window appears, asking what you want to do... Burn music, Rip, copy in folder etc... now when I insert a disk, the window no longer appears, which gives you options and you get to this site... How can I get that back?

  Hey Big-Mack,

  Try the steps of troubleshooting mentioned in the following article and check the result.
  See the enforcement function automatic or AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  If the problem persists, run the Autoplay Repair Wizard and check the result.
  See Autoplay Repair Wizard

  Play functionality; New in Windows Media Player 12 makes it easy to listen to the music, video and photos from your computer to other computers, TVs or stereo on your home network.
  For more information, see play in

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Will there be another windows coming out soon with the floppy drives and DVD players.

  Will there be another Windows coming out soon with the floppy drives and DVD players.

  Hello

  Disks: I don't think so. I always keep 25 floppy disks for Windows 95, should be a few thousand disks for Windows 10. Very, very, very expensive to store files and transport.

  Of DVD: would soon come out, new machines will have 10 Windows (who knows) pre-installed or downloaded. You can always find Windows 10 DVD in some countries where users will still have to use dial-up Modem.

  Hope it makes sense.

• I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full.

  I have a HP Pavilion Windows Vista Home Premium, and the D: drive is full. I don't understand how he got that way... but... I've never used windows to the top, however I do back up with my Norton Security.  I'm not a COMPUTER guru AT ALL and am very confused as to what must be saved for me to do a system restore.  I just made a backup on a 16 GB usb flash drive, which included photos, documents, email, contacts and music.  But what of my registry or my drivers I've updated on the latest updates of 2 years and windows?

  So in plain English for the layperson to the computer, lol, can someone tell me...

  1. where should I back up to? (windows, norton?)

  2. what should I back up? EXACTLY, please. lol (I have hundreds of games, I don't want to back to the top if possible)

  3 and... HOW MUCH ALCOHOL SHOULD I HAVE AVAILABLE WHILE TRYING THIS. LOL just kidding. Laughing out loud

  Hello

  Updates must be installed in a certain order and no Service Pack must be installed unless and until it is offered through Windows Update.

  However, try these options:

  Step 1: You can not reuse what already automatically downloaded and installed. You can however save updates and install them manually if you wish.

  Step 2: You can create a system image on the computer. A system image is an exact copy of a disc. By default, a system image includes the drives required for Windows to run. In addition, it includes Windows and your system settings, programs and files. You can use a system image to restore the contents of your computer if your hard drive or computer ever stops working.

  See:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  Also, you can see the following link for more information about Windows backup:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby